S.I. Distributing Inc.: Miscellaneous Planter Parts

Harvesting
Harvesting
- SCH EasyCut Cutting System
  SCH EasyCut Cutting System
  Cutting system, for most Combines, Swathers & Mower Conditioners. High Quality, Effective and Efficient
- SCH Pro-Drive Knife Drives
  SCH Pro-Drive Knife Drives
  The SCH Pro-Drive high performance knife drive in conjunction with the uniquely simple SCH cutterbar system achieve cutting performances that had never been considered possible in the past, particularly in the case of self-propelled harvesters.
- Auger Trough Liners
  Auger Trough Liners
  May Wes Auger Trough Liners covers the full length of the floor under the auger - not just the feed opening. Available for both grain heads and corn heads.
- Complete Orbit Trac II Reel
  Complete Orbit Trac II Reel
  For Combines and Swathers - Smoother crop flow, less downtime and superior component strength.
- Field Tracker
  Field Tracker
  Field Tracker allows headers to follow the ground contour, independent of the combine, by automatically tilting from side to side in response to terrain changes. This can greatly increase recovery of the low growing crops, like soybeans when you're harvesting hillsides. Field Tracker kits are available for Case-IH combines.
- Gateway Sieves & Chaffers
  Gateway Sieves & Chaffers
  Tested and refined over several harvest seasons by high-hour combine users.
  The Gateway, HCC’s NEW sieve and chaffer system, is significantly lighter than standard sieves and chaffers found on current combines. The patented design utilizes aluminum and plastic construction for lower frame weight.That reduces wear and tear on cleaning shoe bushings and bearings, extends their life, and reduces combine downtime.
- Harvest Products, Miscellaneous
  Harvest Products, Miscellaneous
  Plastic Wear Blocks, ect.
- HCC Flip Reel Kit
  HCC Flip Reel Kit
  The Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in soybeans, canola and other tall, stringy crops. Installation is easy and can be done on equipment you already own. Designed as a retro-fit for all HCC tube-type reels built since 1990. ML 4-1/2" tine spacing or Level II 6" tine spacings are designed to work with the Flip Reel Kit. You can install it yourself in just a few hours using the Installation Instruction Manual.
- OEM Replacement Parts
  OEM Replacement Parts
  OEM replacement knife assemblies are sectional so they can be shipped by UPS. Same high quality parts as original equipment knife assemblies. Includes all hardware for assembly. We also have OEM replacement guards and sections available.
- Orbit Reel Kits
  Orbit Reel Kits
  Eliminating the Reel - Auger Gap
  The revolutionary, patent-pending design of the Orbit Reel is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
- Poly Skid Shoes
  Poly Skid Shoes
  Run your head closer to the ground without pushing and piling soil and you will put more crop in the combine even in wet sticky conditions. Poly Skid Shoes are sold in complete kits to outfit an enitre grain head or as individual replacement parts.
- Radura Disc Mower Blades
  Radura Disc Mower Blades
  The Radura disc mower blade has been used throughout the world for over 50 years. Its exceptional quality and durability is the reason why so many professional users, OEMs, or hobby farmers trust radura disc mower blades for their machines.
- Reel Finger Tines (OEM and Specialty)
  Reel Finger Tines (OEM and Specialty)
  High performance tines for short or sparse crops. The Paddle is a proven tine replacement system that offers true high performance at harvest time. When crop conditions make harvesting difficult and inefficient, the Paddle is the cost-effective alternative to standard tines.
- Retractable Poly Fingers
  Retractable Poly Fingers
  Keep your auger feeding smoothly and efficiently. The May Wes Poly Retractable Fingers are an ideal alternative to metal fingers because they are far less damaging when a metal finger breaks and is fed through the combine. Unlike metal, broken poly will disintegrate before causing equipment damage.
- SCH Croplifters
  SCH Croplifters
  SCH Croplifters for OEM guards, SCH EasyCut I and SCH EasyCut II guards.
- SCH Hedge Trimmer
  SCH Hedge Trimmer
- SCH Pro Flex Lifter
  SCH Pro Flex Lifter
  Schumacher pulse crop lifters combine simple design with durability for your easy pulse crop harvest. With the specifically designed slot, the PRO FLEX LIFTER can fit perfectly on most types of guards. That's why the SCH pulse lifter guarantees a tight fit.
- Stalk Stompers
  Stalk Stompers
  Stalk Stompers available for John Deere, Case-IH, New Holland, Drago, Geringhoff Northstar, Geringhoff, Horizon, Lexion, AGCO, Harvestec, Fantini and Capello cornheads. Tractor stalk stompers available for Case-IH, Challenger, John Deere and New Holland.
- Tailboard Trash Blower
  Tailboard Trash Blower
  A metal tube that installs on end of fan exhaust above chopper or power tailboard. Blows off dust and trash that builds up on the tailboard. Fits John Deere S-Series combines; S550, S650, S660, S670, S680, S690, S760, S770, S780 and S790.
- Unloading Auger Tubes
  Unloading Auger Tubes
  Unloading Auger Tubes for Case-IH, Gleaner, John Deere and Massey-Ferguson
- Unloading Augers
  Unloading Augers
  Unloading augers for Gleaner, Case-IH, John Deere and Massey Ferguson.
Planting
Planting
- Acra-Plant
  Acra-Plant
  Specializes in No-Till & Reduced-Tillage planting and drilling equipment, fertilizer application tools, and chisel plow tools.
- Acre Plus Seed Box Toppers
  Acre Plus Seed Box Toppers
  Acre Plus Seed Box topper, are color matched injected molded plastic Seed Box extentions that fits the original seed box and use existing seed box lid. Adds one bushel to seed box capacity.
- Air Design Scrapers
  Air Design Scrapers
  Save time, labor and money. The Air Design scraper will outlast and outwear standard planter scrapers. The scraper features a special tungsten carbide cutting edge. You'll get superior performance and reduce tedious replacement chores.
- Bullseye Seed Tubes
  Bullseye Seed Tubes
  Bullseye Seed Tubes
- CleanSweep
  CleanSweep
  Setting row cleaners is a pain. CleanSweep lets you do it from your cab.
- Closing Wheels
  Closing Wheels
  Closing wheels including cast closing wheel, Close-N-Till wheels, Finger-Till closing wheels and Rubber closing wheels.
- Depth-A-Matic
  Depth-A-Matic
  Replaces the original depth stop and allows the depth gauge wheels to follow the ground terrain allowing the planter unit to travel smoothly in all field conditions. Fits John Deere & Kinze planters.
- Down Pressure Spring Package
  Down Pressure Spring Package
  This Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range.
- eFlow, 80/20 MIX, 8 LB
  eFlow, 80/20 MIX, 8 LB
  This special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow improves the flow of seed from the hopper to the meter.
- eSet
  eSet
  eSet - Every Seed, Every Time. The eSet meter:
  
  ·         Best-in-class singulation
  
  ·         Outstanding reliability
  
  ·         Easy to maintain
  
  ·         Easy to use
- Finger-Till Cast Wheels
  Finger-Till Cast Wheels
- Gauge Wheel Arm Kits
  Gauge Wheel Arm Kits
  Original, Field Tested And Proven Quick-Adjusting Gauge Wheel Arm Replacement Kits With O-Ring Grease Seals
- Gauge Wheel Assemblies
  Gauge Wheel Assemblies
  Gauge Wheel Assemblies available for John Deere planters, John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
- Gauge Wheel Tires
  Gauge Wheel Tires
  Gauge Wheel Tires for Case-IH planters, Case-IH air drills, John Deere planters, John Deere drills, Kinze planters, New Holland planters and White planters.
- John Deere Seed Boots
  John Deere Seed Boots
  Replacement Seed Boots for John Deere 750,1560,1565 & 1860 drills
- Keeton Seed Firmers & Accessories
  Keeton Seed Firmers & Accessories
  Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence and test show a average increase of up to six bushels per acre.
- M3 Monitor System
  M3 Monitor System
  Population Monitor for Planters and Grain Drills. We can also supply you with a custom harness built specifically for your planter or drill.
- Martin Planting Attachments
  Martin Planting Attachments
  Martin Planting Attachments including, Floating Row Cleaners, Fixed Row Cleaners, Fertilizer Opener, Spading Closing Wheels & Drag Chains.
- Miscellaneous Planter Parts
  Miscellaneous Planter Parts
  Graphite, Kinze Brush Meter Adapter, etc.
- MudSmith Gauge Wheel Assemblies
  MudSmith Gauge Wheel Assemblies
  Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings. Widths of 4" for conventional planters, 3" for no-till and high speed planters, 2.5" for no-till and twin row planters.
- One Wrench
  One Wrench
  Adjust John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench
- Parallel Linkage
  Parallel Linkage
  Replace worn bushing in parrallel linkage for John Deere and Kinze Planters.
- Parallel Linkage Flanged Bushing Rebuild Kit
  Parallel Linkage Flanged Bushing Rebuild Kit
  Parallel Linkage Flanged Bushing Rebuild Kits are BETTER THAN NEW. Worn parallel linkage arms and bushings are a common problem with today's planters and with the newer high-speed planters, the likelihood is that the problem will only get worse. In the past, worn parallel linkage arms and bushings have always had to be replaced with new and expensive ones. Precision Planter Solutions offers a solution that will make your old and worn parallel linkage arms and bushings better than new.
- Planter Replacement Parts
  Planter Replacement Parts
- Precision Meters
  Precision Meters
  Precision Meters & Parts.
- Sabre Tooth Disc Openers
  Sabre Tooth Disc Openers
  The design of the PTT Sabre Tooth Planter Disc Opener allows it to cut, rotate and flow moist granulated soil on top of seed placement for maximizing seed-to-soil contact.
  PTT’s Sabre Tooth Planter Disc Opener eliminates the need for a leading no-till coulter assembly and to facilitate closing of the seed furrow with standard OEM equipment.
  The disc openers will leave 1/4” of granulated soil on top of the seed even in wet harsh conditions to get better seed to soil contact with less sidewall compaction.
- SI Belt Meter
  SI Belt Meter
  The SI Belt Meter will singulate the seed and maintain an accurate population control over a wide range of seed sizes. (2,000 to 4,000 actual seeds per pound). Now you can plant the seed population per acre you choose without guessing or adjusting your drill each time that you change seed sizes.
- Tractor Stalk Stompers
  Tractor Stalk Stompers
- Trail Jet
  Trail Jet
  Applies Liquid Fertilizer Behind the Planter
- Trash Guard
  Trash Guard
  Keep your V-Closing wheels free of old stalks, lumps of soil and other field debris.
- Valion
  Valion
  Valion seed tube guards will eliminate seed tube wear and greatly reduce blade flex to create a properly shaped furrow and improved planting depth control.
- V-Closing Wheel Brackets
  V-Closing Wheel Brackets
  Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
- Venhuizen Accuvac Kit
  Venhuizen Accuvac Kit
  The Original 40-Cell flat corn plate with improved singulator and seed guide.
- WaveVision
  WaveVision
  The Only Sensor That Can Tell Seeds From Dust. OPTICAL SENSORS ARE EASILY FOOLED. Revolutionary WaveVision doesn’t use optics. This sensor-seed tube combination uses high-frequency waves to look at falling objects from every angle.
Tillage
Tillage
- Smart - Till
  Smart - Till
Other Products
Other Products
- The Sure Stop
  The Sure Stop
  Get it right the first time! Grain handling alignment sensor.
- Agra-Cam
  Agra-Cam
  Our cameras are durable and are a perfect solution to help eliminate your blind spots.
- Air Filter Blaster
  Air Filter Blaster
  Extends the life of your filters
  • Reduces fuel consumption
  • Increases the life of your equipment
  • Increases engine performance
- Lockease Hitch Pins
  Lockease Hitch Pins
- Montezuma Tool Boxes
  Montezuma Tool Boxes
  Tool storage so advanced you will feel as though you are working in the future.
- PRO Chute
  PRO Chute
  EMPTY YOUR SEED BOXES DIRECTLY INTO YOUR PLANTER. Quick attach for safe unloading.
- Schuck Cushion Hitches & Bumpers
  Schuck Cushion Hitches & Bumpers
- Swift Hitch
  Swift Hitch
- Swift Tail Lights
  Swift Tail Lights
- Test Stand Belt
  Test Stand Belt
  Test Stand belt for S.I. Distributing's meter test stand and Precision Planting's MeterMax test stand.
- The PostBoxx
  The PostBoxx

DEPTH-A-MATIC, JD 7000, 7100, KINZE

Product ID: DAM001000

Depth-A-Matic for John Deere 7000, 7100 & Kinze (Except Kinze 3000 Series) And New Idea Planters

More...

Price: $32.95

[Read Reviews] [Write A Review]

[Add to Wishlist]

DOWN PRESSURE SPRING KIT

Product ID: PLT141000

This Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range. Will fit all Kinze and John Deere with steel (not cast) parallel linkage arms providing there is room on the inside of the arms

More...

Price: $69.95

[Add to Wishlist]

DOWN PRESSURE SPRING KIT W/PLATE

Product ID: PLT141001

More...

Price: $89.95

[Add to Wishlist]

PARALLEL LINKAGE REBUILD KIT, JD 7000, 7100; KINZE

Product ID: PLT131100

Parallel Linkage Rebuild Kit, Row. For John Deere 7000, 7100 & Kinze Planters, (Must drill out parallel linkage to 1 3/32"). Kit Includes, 8 oversized bushings, 8 special shouldered bolts & 8 locknuts.

More...

Price: $32.95

[Add to Wishlist]

PARALLEL LINKAGE REBUILD KIT; 7200,7300,1700

Product ID: PLT141100

Parallel Linkage Rebuild Kit, Row. For John Deere 7200, 7300 & 1700 series planters, (No drilling required). Kit Includes, 8 oversized bushings, 8 special shouldered bolts & 8 locknuts.

More...

Price: $32.95

[Add to Wishlist]

TRASH GUARD KIT

Product ID: PLT126000

Includes mounting hardware, per row.

More...

Price: $9.95

[Add to Wishlist]