Schuck Hitches – 700 Series

The Model 740 is a designed to fit 2 inch receiver tubes, includes pin. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 740 is a designed to fit 2-1/2 inch receiver tubes, includes pin. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RTR is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 3.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RTR is a designed to fit 2-1/2 inch receiver tubes, includes pin. This hitch has a 3.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RT is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 5.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RT is a designed to fit 2-1/2 inch receiver tubes, includes pin. This hitch has a 5.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 710 is a designed to weld on to an existing bumper. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 720 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 720 is a designed to bolt on to an existing Dodge bumper. For 1994 or newer factory Dodge bumpers with a 8 inch hole pattern. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.