S.I. Distributing Inc.: Site Map

The following is a list of all the Categories, Products and Feature Articles on our site. We hope it will assist you in finding what you're looking for.

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits John Deere, Kinze & Great Plains planters with bolt-on hubs. (SCW1344)

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits John Deere model 7200 & 7300 planters. (SCW1343)

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits John Deere & Kinze planters with roll pin attached hubs. (SCW1341)

Planter Spading Closing Wheel, Left hand, single 15" spiked closing wheel. Fits John Deere, Kinze & Great Plains planters with bolt-on hubs. (SCW1544SL)

Planter Spading Closing Wheel, Right hand, single 15" spiked closing wheel. Fits John Deere, Kinze & Great Plains planters with bolt-on hubs. (SCW1544SR)

Planter Spading Closing Wheel, Left hand, single 15" spiked closing wheel. Fits John Deere model 7200 & 7300 planters. (SCW1543SL)

Planter Spading Closing Wheel, Right hand, single 15" spiked closing wheel. Fits John Deere model 7200 & 7300 planters. (SCW1543SR)

Planter Spading Closing Wheel, Left hand, single 15" spiked closing wheel. Fits John Deere & Kinze planters with roll pin attached hubs. (SCW1541SL)

Planter Spading Closing Wheel, Right hand, single 15" spiked closing wheel. Fits John Deere & Kinze planters with roll pin attached hubs. (SCW1541SR)

Planter Spading Closing Wheels, includes a set of 9" spiked closing wheels. Fits Case-IH planters, John Deere planters & Kinze planters with shallow closing attachments. (SCW899)

For the first time, with just a set screw, you can change the aggressiveness of the Precision meter. Set the brush toward the outside of the finger for large seeds so they don't dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles.

Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series.

Belt Meter Kit. Fits Case-IH drill model 5400 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 20' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 20' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 20' with 20" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 20' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 15' with 15" spacing with 11 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 15' with 15" spacing with 12 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 20' with 15" spacing with 14 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 20' with 15" spacing with 15 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 20' with 15" spacing with 16 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5500 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5500 30' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5500 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Case-IH drill model 5500 Soybean Special 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model SF30 30' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1200 12' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1200 12' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1200 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1200 12' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1200 12' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1205 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1210 12' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1210 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1210 12' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1210 12' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 16" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1500 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1510 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1510 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1510 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 1510 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 14" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2000 20' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2010 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2010 20' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2010 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2010 20' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2015 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2400 24' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2400 24' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2400 24' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2400 24' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2400 24' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2400 24' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2410 24' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2410 24' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2410 24' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2410 24' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 2SF24 24' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3010 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3010 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3010 30' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD14 14' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7.5" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 8" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 10" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 8" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model SS45 45' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model SS'87 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits Great Plains drill model SS'87 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter)

Belt Meter Kit. Fits John Deere drill model 1520 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1520 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1520 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1530 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1530 20' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 10' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 10' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1560 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 10' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 10' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 1590 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 25' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 25' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 25' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 25' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 30' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 35' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 455 35' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 10' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 10' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 10' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter Kit. Fits John Deere drill model 750 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used.)

Belt Meter for Case-IH & early Great Plains, Flat Top.

Belt Meter for later Great Plains, Angled Top.

Belt Meter for John Deere.

BullsEye seed tube, for 1/2" or 3/4" sensors.

BullsEye seed tube, for 1/2" or 3/4" sensors. Fits John Deere planter models 7200 & 1700 series. (7200 requires PPM700137)

BullsEye seed tube, for 1/2" or 3/4" sensors. Fits all Monosem planters.

BullsEye seed tube, for 1/2" or 3/4" sensors. Fits White planter models 5100 (tube modification required), 6000 & 8000 series.

V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts bolt on style closing wheels. Color is Green.

V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts roll pin style closing wheels. Color is Green.

V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7200, 7300 & 1700 and accepts bolt on style closing wheels. Color is Green.

V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits Kinze 1993 and before planters and accepts roll pin style closing wheels. Color is Black.

V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits Kinze planters 1994 and newer and accepts bolt on style closing wheels. Color is Black.

Cotter pin with a hump, used in all Belt Meters to hold the cutoff brush adjustment.

Depth-A-Matic for John Deere 7000, 7100 & Kinze (Except Kinze 3000 Series) And New Idea Planters

Depth-A-Matic for John Deere 7200, 7300 & 1700 Series Planters

Drill Spading Closing Wheel, single, dimple closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564D)

Drill Spading Closing Wheel, Left hand, single 14 point dimple closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4D-14L)

Drill Spading Closing Wheel, Right hand, single 14 point dimple closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4D-14R)

Drill Spading Closing Wheel, single, dimple closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564D)

Drill Spading Closing Wheel, Left hand, single 20 point dimple closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4D-20L)

Drill Spading Closing Wheel, Right hand, single 20 point dimple closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4D-20R)

Twisted Drag chain kit. Fits all John Deere MaxEmerge units, Kinze & White units with bolt on closing wheels. Kinze units with roll pin attached closing wheels will need holes drilled for mounting.

Half section for the SCH Knife.

Clip for Steel tine on wood bat reel.

Reel tine, for a Level II reel - Left hand bat, Quantity of one with screw.

Reel tine, for a Level II reel - No bat, Quantity of one with screw.

Reel tine, for a Level II reel - Right hand bat, Quantity of one with screw.

Reel tine, for a ML reel - Left hand bat, Quantity of one with screw.

Reel tine, for a ML reel - No bat, Quantity of one with screw.

Reel tine, for a ML reel - Right hand bat, Quantity of one with screw.

Reel tine, for a Wood Bat reel, Quantity of one.

Hose Clamp, for seed tube mounted firmers.

Internal deflector set for 13" spiked closing wheels. (ITDSCWET)

Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper housing. Fits Case-IH drill models 5100 & 5400.

Keeton Seed Firmer, Short low profile tail. Seed boot mount. Fits Case-IH planter models 400, 500 800 & 900. Case-IH drill models 5400 & 5500 including Soybean Special drills. (liquid not available).

Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper support rod. Fits Crustbuster drill models 3400 series & 4000 series, fits all All-Plant or Min-Till openers.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper bracket. Fits Crustbuster drill models 3700, 3800 & 3400 without parallel arms (Will not fit 3400 All-Plant or 3400 Min-Till openers).

Keeton Seed Firmer, Standard Liquid Tail. All 00HD series row units: 2S-2600HD, 3S-3000HD, 3S-4000HD and 3S-4000HDA.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper bracket. Fits All Precision drills (singulating & volumetric metering wheel): 1510P (3 pt), 1520P (3 pt), 2010P (3 pt), 2020P (3 pt), 2410P (3 pt), 2420P (3 pt), 2520P (3 pt), 3N-3010P, 3N-3020P, 3N-4010P and 3N-4020P.

Keeton Seed Firmer, Standard Liquid Tail. All 25 series planter style row units and HD10 series row units: YP1225, YP1625, YP2425, 1525P, 1510HDP, 1510HDF, 2010HDP & F, 2020HDP & F, 2025P & F and 2520P.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper bracket. Fits fluted metering wheel drills: 00 Series, 05 Series, 06 series, 10 Series and 20 Series (-2003).

Keeton Seed Firmer, Standard Liquid Tail. Mounts to back of T-handle slotted bracket. Fits John Deere drill models 1560, 1590, 1690, 1860, 1890 & 1990.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to seed disk scraper. Fits John Deere drill models 450, 455, 520 & 1520.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to seed disk scraper. Fits John Deere drill models 750 & 1850.

Keeton Seed Firmer, Standard Dry Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (EdgeVac requires drilling two holes). (Will not work with rotary disk scrapers)

Keeton Seed Firmer, Standard Liquid Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (EdgeVac requires drilling two holes). (Will not work with rotary disk scrapers)

Keeton Seed Firmer, Long Low Profile Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (EdgeVac requires drilling two holes). (Will not work with rotary disk scrapers)

Keeton Seed Firmer, Short Low Profile Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (EdgeVac requires drilling two holes). (Will not work with rotary disk scrapers)

Keeton Seed Firmer, Standard Liquid Tail. Mounts to fertilizer opener. Fits All Krause drill models.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to seed disk opener. Fits Most Marliss drill models (Will not fit 2038).

Keeton Seed Firmer, Modified Dry Tail. Mounts to back of disk opener casting. Fits Most Sunflower drills.

Keeton Seed Firmer, Standard Dry Tail. Seed Tube Mount. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series, (Will not fit EdgeVac planter). White planter models 5000, 6000 & 8000 series. Great Plains Yield-Pro planters. Monosem fits all planter models.

Keeton Seed Firmer, Standard Liquid Tail. Seed Tube Mount. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series, (Will not fit EdgeVac planter). White planter models 5000, 6000 & 8000 series. Great Plains Yield-Pro planters. Monosem fits all planter models.

Keeton Seed Firmer, Standard Liquid Tail. Mounts to seed disk scraper. Fits All Tye drills.

Keeton Seed Firmer, Standard Dry Tail. Universal Bracket. Mounts to seed disk opener shafts and around row unit shank. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (Will not fit EdgeVac planter). White planter models 6000 & 8000 series (bracket modification is required).

Keeton Seed Firmer, Standard Liquid Tail. Universal Bracket. Mounts to seed disk opener shafts and around row unit shank. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (Will not fit EdgeVac planter). White planter models 6000 & 8000 series (bracket modification is required).

Keeton Seed Firmer, Long Low Profile Tail. Universal Bracket. Mounts to seed disk opener shafts and around row unit shank. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (Will not fit EdgeVac planter). White planter models 6000 & 8000 series (bracket modification is required).

Keeton Seed Firmer, Short Low Profile Tail. Universal Bracket. Mounts to seed disk opener shafts and around row unit shank. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series (Will not fit EdgeVac planter). White planter models 6000 & 8000 series (bracket modification is required).

Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.

Machined washer for the SCH ball joint knifehead.

Fits bracket mounted Keeton Seed firmer to add down pressure.

Fits seed tube mounted Keeton Seed firmer to add down pressure.

Nut for the SCH ball joint knifeheads.

The new and improved Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990. For 1010 headers with serial number below JJC0200000. For 1020 headers with serial number below JJC0215000 (1994 and prior). Verify single eccentric or double eccentric reel.

The new and improved Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990. For 1010 headers with serial number JJC0200001 - JJC0300000. For 1020 headers with serial number JJC0215001 - JJC0315000 (1995-1997). Verify single eccentric or double eccentric reel.

The new and improved Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990. For 1010 headers with serial number JJC0300001 & CBJ023001 and up. For 1020 headers with serial number JJC0315001 & CBJ023003 and up (1998 and later). Verify single eccentric or double eccentric reel.

Parallel Linkage Rebuild Kit, Row. For John Deere 7000, 7100 & Kinze Planters, (Must drill out parallel linkage to 1 3/32"). For John Deere 7200, 7300 & 1700 planters, (No drilling required). Kit Includes, 8 oversized bushings, 8 special shouldered bolts & 8 locknuts.

Reel tine, for a Level II reel - Full bat, Package of 10 with screws.

Reel tine, for a Level II reel - Left hand bat, Package of 10 with screws.

Reel tine, for a Level II reel - No bat, Package of 10 with screws.

Reel tine, for a Level II reel - Right hand bat, Package of 10 with screws.

Reel tine, for a Love reel, Package of 10 with screws.

Reel tine, for a ML reel - Full bat, Package of 10 with screws.

Package of 10 Paddles, screws and complete installation instructions. Fits the Level II Reel only.

Package of 10 “Paddles”, screws and complete installation instructions. Fits the ML Reel only.

Package of 10 “Paddles”, screws and complete installation instructions. Fits the Polytine Reel only.

Package of 10 “Paddles”, screws and complete installation instructions. Fits the Wood Bat Reel only.

Reel tine, for a Polytine reel, Package of 10 with screws.

Package of 10 Quick Fingers. Will only fit Level II (6" tine spacing) reels.

Package of ten knife sections with 20 Bolts and 20 Nuts for the SCH knife system.

Reel tine, for a Level II reel - Full bat, Package of 130 with screws.

Reel tine, for a ML reel - Full bat, Package of 180 with screws.

Reel tine, for a Love reel, Package of 275 with screws.

Package of the Bolts and Nuts for knife sections of the SCH knife system, 50 each of the Bolt and Nut.

Reel tine, for a Polytine reel, Package of 500 with screws.

Reel tine, for a ML reel - Left hand bat, Package of 6 with screws.

Reel tine, for a ML reel - No bat, Package of 6 with screws.

Reel tine, for a ML reel - Right hand bat, Package of 6 with screws.

Long lasting self-lubricating plastic chain tightner and/or Wear Block with 9/16" hole.

The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeble inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush.

The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.

Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series.

Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series.

Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series.

Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series.

SCH Roller Guide kit, including bridge rollers and spacer plates. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is required to maintain proper tolerances.

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series III, 300, 500, 8000 & 8200. John Deere, 200, 900, 900F, 900R, 600F & 600R series. All Honey Bee platforms. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 12mm guards are black in color, with a 2 stamped on the bottom.

Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 12mm guards are black in color, with a 2 stamped on the bottom.

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.

Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.

Fits SCH EasyCut systems installed on CaseIH, 820 & 1020. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 17mm guards are light gray in color, with a 7 stamped on the bottom.

Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 17mm guards are light gray in color, with a 7 stamped on the bottom.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

Fits SCH EasyCut system installed on Agco with a Hart Carter wobble box. This Agco platform has a 3/8 inch thick backbone (the piece of steel that the guards bolt to) and no tie rod to adjust register of the knife. Bearings are not included.

Fits SCH EasyCut system installed on Agco early style 300. This Agco platform has a 1/4 inch thick backbone (the piece of steel that the guards bolt to) and no tie rod to adjust register of the knife.

Fits SCH EasyCut system installed on Agco 300, 500, & 800. This knifehead accepts the 3/4 inch tie rod (not included).

Fits SCH EasyCut system installed on Agco 300, 500, 800 & 8000. This knifehead accepts the 7/8 inch tie rod (not included).

Fits SCH EasyCut system installed on Case-IH 1010 & 1020 series platforms.

Fits SCH EasyCut system installed on Case-IH 820 series platforms.

Fits SCH EasyCut system installed on John Deere 200 & 900 series platforms.

Fits SCH EasyCut system installed on John Deere 600 series platforms.

Fits SCH EasyCut system installed on New Holland 970, 972, 973, 974 & 74C series platforms, Left Hand knifehead. Bearings are not included.

Fits SCH EasyCut system installed on New Holland 970, 972, 973, 974 & 74C series platforms, Right Hand knifehead. Bearings are not included.

The Model 1000 Bumper is specifically designed for all pickup trucks. The 50,000 PSI yield strength tubing makes this the strongest commercial bumper available. The bumper also requires a model specific mounting bracket, stone shield and a hitch to complete. Models are available for Ford, Dodge and GM pickups. This heavy-duty bumper will accommodate our bolt-on type cushion hitches The Model 1000 Bumper with an 850 Cushion Hitch is an ideal application on a 1-1/2 or 2 ton truck. Less hitch height drop. Information needed to order: make of vehicle, model, year, frame width and bed length.

Includes 3 Polyethane Bearings and 2 Urethane Cushions.

The Model 310 is a designed to weld on to an existing bumper. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.

The Model 320 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.

The Model 340 is a designed to fit 2 inch receiver tubes, includes pin. This hitch can be turned over for a 4 inch difference in tongue height. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.

Includes 5 Polyethane Bearings and 4 Urethane Cushions.

The Model 710 is a designed to weld on to an existing bumper. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 720 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 720 is a designed to bolt on to an existing Dodge bumper. For 1994 or newer factory Dodge bumpers with a 8 inch hole pattern. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 740 is a designed to fit 2 inch receiver tubes, includes pin. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750 is a designed to bolt on to an existing Dodge bumper. For 1994 or newer factory Dodge bumpers with a 8 inch hole pattern. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RT is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 5.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RTR is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 3.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

Includes 7 Polyethane Bearings and 6 Urethane Cushions.

The Model 810 is a designed to weld on to an existing bumper. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

The Model 820 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

The Model 840 is a designed to fit 2 inch receiver tubes, includes pin. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

The Model 850 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

Stainless steel spring. For Series 700 or 800 Series hitches

Chrome Plated. O-ring and water tight cap seal. 1/4 turn of key to lock or unlock.

Pin for a receiver tube. Includes keeper pin

Reduces class 5 (2-1/2" I.D.) receiver tube to (2" I.D.) receiver tube.

SCH Fine Section, 10 serrations per inch, for SCH Knife.

SCH Coarse Section, 7 serrations per inch, for SCH Knife.

With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion.

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits White planter model 5100 only. (SCW514)

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits White planter model 6100 with single closing wheel. (SCW614)

Drill Spading Closing Wheel, Left hand, single spiked closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564L)

Drill Spading Closing Wheel, Right hand, single spiked closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564R)

Drill Spading Closing Wheel, Left hand, single spiked closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4L)

Drill Spading Closing Wheel, Right hand, single spiked closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4R)

Splitter Insert of Keeton Seed Firmers.

A seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/double. The new SureFire cupped seed belt releases seed down the center every time for sure spacing and more ears.