Site Map

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series III, 300, 500, 8000 & 8200. John Deere, 200, 900, 900F, 900R, 600F & 600R series. All Honey Bee platforms. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 12mm guards are black in color, with a 2 stamped on the bottom. Agco part# 71443947

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series III, 300, 500, 8000 & 8200. John Deere, 200, 900, 900F, 900R, 600F & 600R series. All Honey Bee platforms. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 12mm guards are black in color, with a 2 stamped on the bottom.

Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 12mm guards are black in color, with a 2 stamped on the bottom. Agco part#71443949

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series III, 300, 500, 8000 & 8200. John Deere, 200, 900, 900F, 900R, 600F & 600R series. All Honey Bee platforms. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 12mm guards are black in color, with a 2 stamped on the bottom. Agco part#71443948

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.

Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.

Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.

Fits SCH EasyCut systems installed on CaseIH, 820 & 1020. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 17mm guards are light gray in color, with a 7 stamped on the bottom.

Fits SCH EasyCut systems installed on CaseIH, 820 & 1020. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 17mm guards are light gray in color, with a 7 stamped on the bottom.

Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 17mm guards are light gray in color, with a 7 stamped on the bottom.

Fits SCH EasyCut systems installed on CaseIH, 820 & 1020. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 17mm guards are light gray in color, with a 7 stamped on the bottom.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. (Note: This SCH Kit requires replacing your original skid plates with the SCH Skid plates Part#SCP082817, which must be ordered separately)

Fits SCH EasyCut system installed on Agco with a Hart Carter wobble box. This Agco platform has a 3/8 inch thick backbone (the piece of steel that the guards bolt to) and no tie rod to adjust register of the knife. Bearings are not included.

Fits SCH EasyCut system installed on Agco early style 300. This Agco platform has a 1/4 inch thick backbone (the piece of steel that the guards bolt to) and no tie rod to adjust register of the knife.

Fits SCH EasyCut system installed on Agco 300, 500, & 800. This knifehead accepts the 3/4 inch tie rod (not included).

Fits SCH EasyCut system installed on Agco 300, 500, 800 & 8000. This knifehead accepts the 7/8 inch tie rod (not included).

Fits SCH EasyCut system installed on Case-IH 1010 & 1020 series platforms.

Fits SCH EasyCut system installed on Case-IH 820 series platforms.

Fits SCH EasyCut system installed on John Deere 200 & 900 series platforms.

Fits SCH EasyCut system installed on John Deere 600 series platforms.

Fits SCH EasyCut system installed on MacDon FD70 and CIH 2162 platforms. Left Hand knifehead. Bearings are not included.

Fits SCH EasyCut system installed on MacDon FD70 and CIH 2162 platforms. Right Hand knifehead. Bearings are not included.

Fits SCH EasyCut system installed on New Holland 970, 972, 973, 974 & 74C series platforms, Left Hand knifehead. Bearings are not included.

Fits SCH EasyCut system installed on New Holland 970, 972, 973, 974 & 74C series platforms, Right Hand knifehead. Bearings are not included.

The Model 1000 Bumper is specifically designed for all pickup trucks. The 50,000 PSI yield strength tubing makes this the strongest commercial bumper available. The bumper also requires a model specific mounting bracket, stone shield and a hitch to complete. Models are available for Ford, Dodge and GM pickups. This heavy-duty bumper will accommodate our bolt-on type cushion hitches The Model 1000 Bumper with an 850 Cushion Hitch is an ideal application on a 1-1/2 or 2 ton truck. Less hitch height drop. Information needed to order: make of vehicle, model, year, frame width and bed length.

Pin for a receiver tube. Includes keeper pin

Includes 3 Polyethane Bearings and 2 Urethane Cushions.

Pin for a receiver tube. Includes keeper pin

The Model 310 is a designed to weld on to an existing bumper. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.

The Model 320 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.

The Model 340 is a designed to fit 2 inch receiver tubes, includes pin. This hitch can be turned over for a 4 inch difference in tongue height. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.

Includes 5 Polyethane Bearings and 4 Urethane Cushions.

The Model 710 is a designed to weld on to an existing bumper. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 720 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 720 is a designed to bolt on to an existing Dodge bumper. For 1994 or newer factory Dodge bumpers with a 8 inch hole pattern. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 740 is a designed to fit 2 inch receiver tubes, includes pin. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750 is a designed to bolt on to an existing Dodge bumper. For 1994 or newer factory Dodge bumpers with a 8 inch hole pattern. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RT is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 5.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

The Model 750-RTR is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 3.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.

Includes 7 Polyethane Bearings and 6 Urethane Cushions.

The Model 810 is a designed to weld on to an existing bumper. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

The Model 820 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

The Model 840 is a designed to fit 2 inch receiver tubes, includes pin. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

The Model 850 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.

Stainless steel spring. For Series 700 or 800 Series hitches

Chrome Plated. O-ring and water tight cap seal. 1/4 turn of key to lock or unlock.

Reduces class 5 (2-1/2" I.D.) receiver tube to (2" I.D.) receiver tube.

SCH Fine Section, 10 serrations per inch, for SCH Knife.

SCH Coarse Section, 7 serrations per inch, for SCH Knife.

2 Per Meter.

Seed Boot, for John Deere 1560, 1565 & 1860 - Bottom Left Hand

Seed Boot, for John Deere 1560, 1565 & 1860 - Bottom Right Hand

Seed Boot, for John Deere 1560, 1565 & 1860 - Top Left Hand

Seed Boot, for John Deere 1560, 1565 & 1860 - Top Right Hand

Seed Boot, for John Deere 750 & 1850 - Left Hand

Seed Boot, for John Deere 750 & 1850 - Right Hand

AccuVac 40-cell Seed Plate. This item is the seed plate only.

Skid Plate for MacDon draper platforms, this skid plate replaces the original MacDon skid plate and fits the SCH guards. The skid plate is six inches wide and has two holes.

With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion.

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits White planter model 5100 only. (SCW514)

Planter Spading Closing Wheels, includes a set of 13" spiked closing wheels. Fits White planter model 6100 with single closing wheel. (SCW614)

Drill Spading Closing Wheel, Left hand, single spiked closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564L)

Drill Spading Closing Wheel, Right hand, single spiked closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564R)

Drill Spading Closing Wheel, Left hand, single spiked closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4L)

Drill Spading Closing Wheel, Right hand, single spiked closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4R)

Splitter Insert of Keeton Seed Firmers.

MagnoJet, STIA 135 Degree 01 Orange, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.

MagnoJet, ST 135 Degree 01 Orange, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, STIA 135 Degree 01.5 Green, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.

MagnoJet, ST 135 Degree 01.5 Green, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, STIA 135 Degree 02 Yellow, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.

MagnoJet, ST 135 Degree 02 Yellow, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, STIA 135 Degree 02.5 Lilac, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.

MagnoJet, ST 135 Degree 02.5 Lilac, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, STIA 135 Degree 03 Blue, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.

MagnoJet, ST 135 Degree 03 Blue, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, STIA 135 Degree 04 Red, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.

MagnoJet, ST 135 Degree 04 Red, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, ST 135 Degree 05 Brown, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

MagnoJet, ST 135 Degree 06 Gray, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.

A seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/double. The new SureFire cupped seed belt releases seed down the center every time for sure spacing and more ears.