S.I. Distributing Inc....: Disc Openers for John Deere

Planters

Planters
- Acra-Plant
  
  Acra-Plant
  
  Acra-Plant specializes in no-till & reduced-tillage planting.
  
  Acra-Plant products include: Notched Disc Openers, Fertilizer Knives, Quick Change Fertilizer Knives, V-Slice Inserts and V-Shots, and Blu-Jet Parts.
- Air Control Systems for Row Cleaners
  
  Air Control Systems for Row Cleaners
  
  The following three Row Cleaner Air Control Systems allow the operator to raise and lower floating row units on-the-go by varying the amount of air pressure in the cylinders. Since adjustments are easy, you will make adjustments when you should. Precision Planting's CleanSweep Row-Cleaner Air Control System; Martin-Till Manual Bidirectional Air Control System; and Martin-Till SmartClean Row-Cleaner Air Control System
- Bullseye Seed Tubes
  
  Bullseye Seed Tubes
  
  Consider Bullseye Seed Tubes as they: Reduce seed tube bounce; Reduce excessive wear; Feature a long life with the tungsten-carbide tip; and Feature a smooth path to the trench Seed Tube Bounce or Ricochet Can Ruin the Best Meter Singulation.
- Closing Wheel Brackets
  
  Closing Wheel Brackets
  
  Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
  
  Manufactured by S.I. Distributing, for accurate closing wheel angle for optimum closing.
- Closing Wheels
  
  Closing Wheels
  
  Closing wheels include Finger-Till closing wheels, Martin-Till closing wheels, cast closing wheels and rubber closing wheels. Closing wheels are the last part of the planter that can affect the crop at planting. The wrong setup can negate all the proper placement and depth you have achieved. Closing wheels securely close the furrow and eliminate air pockets.
- Disc Openers
  
  Disc Openers
  
  Wearparts seed disc openers, with Forges De Niaux blades and PEER bearings, feature improved life with sharp cutting-edge retention due to high hardness. Available for Case-IH, Great Plains, Kinze, John Deere and White
- DUST Seed Lubricant and DUST + Terrasym
  
  DUST Seed Lubricant and DUST + Terrasym
  
  Soy-protein DUST is a healthier, safer and cleaner seed and mechancal lubricant and as a replacement to graphite and talc. Terrasym® 401 + DUST™for soybeans and Terrasym® 450 + DUST™for corn are designed to deliver improved nutrient uptake leading to robust early season root development, enhanced tolerance of abiotic stress throughout the growing season, and higher yields at harvest.
- eFlow / Dispenser Lid
  
  eFlow / Dispenser Lid
  
  e-Flow is a special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow also improves the flow of seed from the hopper to the meter. The eFlow dispenser lid is a measuring lid that fits the 8-lb eFlow jug.
- Finger-Till Cast Closing Wheels
  
  Finger-Till Cast Closing Wheels
  
  S.I. Distributing's Finger-Till Closing Wheel crumble sidewalls and close the furrow for optimum seed-to-soil contact. The side fins provide depth control and fine-tune the soil.
  
  • More aggressive • Better in wet, no-till conditions
- Gauge Wheels and Assemblies
  
  Gauge Wheels and Assemblies
  
  Gauge wheel arms, assemblies and tires available for John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
- Keeton Seed Firmers and Accessories
  
  Keeton Seed Firmers and Accessories
  
  Keeton Seed Firmers gently press every seed into the bottom of the trench to place it firmly into the soil, to improve seed-to-soil contact. Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence, and tests show, an average increase of six bushels per acre.
- M3 Monitor System
  
  M3 Monitor System
  
  Population Monitor for Planters. The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. We can also supply you with a custom harness built specifically for your planter or drill.
- Martin-Till Planting Attachments
  
  Martin-Till Planting Attachments
  
  Martin-Till planter attachments make it possible for you to plant into higher levels of residue and moisture. Martin-Till Planting Attachments include: Floating Row Cleaners, Fixed Row Cleaners, Fertilizer Opener, Spading Closing Wheels & Drag Chains.
- Miscellaneous Planter Parts
  
  Miscellaneous Planter Parts
  
  The Kinze Brush Meter Adapter is a conversion kit to adapt to Kinze Brush-Type Seed Meter to fit a John Deere 7200, 7300 and 1700 Series Finger Pick-Up Seed Box.
  
  Graphite 1-lb and 5-lb containers - Used in all belt meter kits.
- Norseman Gauge Wheel Arm Kits
  
  Norseman Gauge Wheel Arm Kits
  
  Norseman Roller Bearing Gauge Wheel Arm Kits will outlast any gauge wheel arm on the market today. These Norseman cast replacement arms feature the industry-standard 5203KYY2 sealed bearing. This double-roller bearing stays tight and withstands the abuse, unlike the OEM threaded bushings. The Norseman gauge wheel arms that are distributed by S.I. Distributing are made in the USA, with the same standard of excellence. Available for specific John Deere and Kinze planters.
- Outback Wrap Hydraulic Hose Markers, Hose Tamers
  
  Outback Wrap Hydraulic Hose Markers, Hose Tamers
  
  Outback Wrap Hydraulic Hose Markers
  
  Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
- Parallel Arms Rebuild Kits - PPS Flange Bushing
  
  Parallel Arms Rebuild Kits - PPS Flange Bushing
  
  PPS Premium Complete Flange Bushing Rebuild Kits, with Parallel Arms
  
  PPS Rebuild-Your-Existing-Parallel-Arms (Hardware Only) Kits
  
  PPS No-Ream Complete Flange Bushing Rebuild Kits, with Parallel Arms
- Parallel Linkage
  
  Parallel Linkage
  
  Replace worn parallel arms and bushings in parrallel linkage for John Deere and Kinze Planters.
  
  Parallel Linkage including Parallel Linkage Rebuild Kits, Upper Parallel Arms and Lower Parallel Arms
- Planter Parts
  
  Planter Parts
  
  Products include: Acres Plus Seed Box Toppers, Air Design Scrapers, Depth-A-Matic, Down Pressure Spring Package, Seed Tube Guard, Trail Jet and the Trash Guard
- Precision Finger Pickup Meters
  
  Precision Finger Pickup Meters
  
  Precision Meters & Parts. Because the components all mesh perfectly, Precision Meters hold one seed at a time, then release it. They’re engineered and built to do it again and again. You’ll see fewer skips and doubles – and higher yield.
- Rebounder Seed Deflectors
  
  Rebounder Seed Deflectors
  
  Rebounder seed deflectors funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce, resulting in seeds being flipped on top of the soil.
- Seed Right Seed Plates
  
  Seed Right Seed Plates
  
  Use Your Planter for Planting Cover Crops and Small Grains! The proven SeedRight seed plates allow growers with John Deere, Precision Planting, and Kinze vacuum meters the flexibility to accurately plant cover crops and small grains. These include wheat, oats, cereal rye, turnips, radishes, crimson clover and more.
- Set-N-Seed
  
  Set-N-Seed
  
  Set-N-Seed is a planter seed depth calibration tool designed to accurately and efficiently set the desired depth of your planter row unit. Whether you are out in the field, needing to set depth after changing a row unit part, or in the shop getting ready to plant, Set-N-Seed can get you the correct depth anywhere on level ground.
- Spoked Gauge Wheel Assemblies
  
  Spoked Gauge Wheel Assemblies
  
  Spoked gauge wheel assemblies available for Case-IH, Great Plains, John Deere, Kinze, Monsom and White.
- Vacuum Meters - eSet and AccuVac Kits
  
  Vacuum Meters - eSet and AccuVac Kits
  
  The Precision Planting eSet Meter is a retrofit system that goes inside of a John Deere vacuum meter and uses a flat disk without cells that are sensitive to seed size and shape, paired with a floating singulator that doesn’t need adjustments. You simply set your vacuum, fill the planter with seed, and go.
- Valion Seed Tube Guards
  
  Valion Seed Tube Guards
  
  Exapta Valion seed tube guards will eliminate seed tube wear and greatly reduce blade flex to create a properly shaped furrow and improved planting depth control. These guards are perfect for no-till or high-wear conditions, or anyone who is simply tired of replacing seed tube guards so often.

Disc Openers for John Deere

DISC ASSEMBLY, 204B, 15" X 3.5MM, CAST HUB, FDN

Product ID: WPT015077

Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, double 204 bearing, cast hub and dust cap. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5.

More...

Price: $69.21

[Read Reviews] [Write A Review]

[Add to Wishlist]

DISC ASSEMBLY, 205B, 15" X 3.5MM, FDN

Product ID: WPT015063

Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, double 205 bearing, hub and plastic dust cap. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5.

More...

Price: $65.17

[Add to Wishlist]

DISC ASSEMBLY, 204/205B, 15" X 3.5MM, LP CAST HUB, FDN

Product ID: WPT015043

Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, 204/205 hybrid bearing and low profile cast hub. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5; Kinze 3000, 4000 series. The Kinze 3000 and 4000 series require a longer bolt, order HDW220049 hardware kit.

More...

Price: $69.21

[Add to Wishlist]

DISC ASSEMBLY, 204B, 15" X 3.5MM, FDN

Product ID: WPT015037

Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, single 204 bearing, hub and plastic dust cap. Will fit John Deere MaxEmerge, MaxEmerge 2, Plus, Pro.

More...

Price: $50.95

[Add to Wishlist]

DISC ASSEMBLY, 204B, 15" X 3.5MM, CAST HUB, CELSAN

Product ID: WPT915077

Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, 204 bearing, cast hub and steel dust cap. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5.

More...

Price: $60.51

[Add to Wishlist]

DISC ASSEMBLY, 204B, 15" X 3.5MM, FDN

Product ID: WPT015021

Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, double 204 bearing, hub and plastic dust cap. Will fit Harvest International Laser Pro 1; John Deere MaxEmerge XP, XP Pro, MaxEmerge 5; Kinze 3000, 4000 series. Kinze 3000 and 4000 require one HDW220049 hardware kit per row.

More...

Price: $59.95

[Add to Wishlist]

DISC BLADE, 13.5" X 3MM, FDN

Product ID: WPT013588

Disc opener blade only, 13.5" diameter x 3mm thick. Will fit John Deere conventional grain drills/air seeders 730, 770, 780, 1060; John Deere with aluminum seed boots 450, 455, 515, 520, 1520, 8100, 8200, 8250, 8300, 8350, 8500, 8550, 9400, 9450, BD1108, BD1110, BD1113.

More...

Price: $21.95

[Add to Wishlist]