S.I. Distributing Inc....: 18' SCH KIT - MASSEY FERGUSON

Grain Platforms

Grain Platforms
- - SCH EasyCut Cutting System
  
  - SCH EasyCut Cutting System
  
  The SCH Easy Cut II cutterbar system eliminates the need for any adjustments, meaning more uptime and less maintenance. High quality spring steel guards, completely hardened sections and roller guides give this sickle bar system durability and low maintenance.
- - SCH Pro-Drive Knife Drives
  
  - SCH Pro-Drive Knife Drives
  
  Most knife drives lose stroke length and force.
  
  The SCH Pro-Drive’s planetary gear system is in rotation at all times. This produces a 100% linear knife movement, compared with wobble boxes or other oscillating and pendulum drives.
- - HCC Orbit Trac II Reel Kits
  
  - HCC Orbit Trac II Reel Kits
  
  Eliminating the Reel - Auger Gap
  The revolutionary, patent-pending design of the Orbit Reel is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
- - May Wes Poly Skid Shoes
  
  - May Wes Poly Skid Shoes
  
  Run your head closer to the ground without pushing and piling soil and you will put more crop in the combine even in wet sticky conditions. May Wes Poly Skid Shoes are sold in complete kits to outfit an enitre grain head or as individual replacement parts.
- - Replacement Reel Finger Tines (Specialty and OEM)
  
  - Replacement Reel Finger Tines (Specialty and OEM)
  
  Replacement reel tines - specialty and OEM - to match almost any reel on the market and deliver more grain to the combine!
- - SCH Croplifters
  
  - SCH Croplifters
  
  SCH crop lifters help lift and feed down crops and are essential in the harvest of different crops such as down wheat, oats, milo and other common cereal grains.
  
  SCH Croplifters for OEM guards, SCH EasyCut I and SCH EasyCut II guards.
- - SCH Pro Flex Crop Lifter
  
  - SCH Pro Flex Crop Lifter
  
  The SCH Pro Flex Lifter is specially designed, and often times essential, for the harvest of “downed” crops, whether it be because of snow, wind or heavy rains. Designed for edible beans, lentils, peas and downed soybeans.
- Auger Trough Liners - Grain Heads
  
  Auger Trough Liners - Grain Heads
  
  When the grain head is covered with the 1/8" thick UHMW poly May Wes Auger Trough Liners, wet grain and moisture will not cause corrosion.
  
  May Wes Auger Trough Liners covers the full length of the floor under the auger - not just the feed opening.
- Bushel Plus SmartPan System
  
  Bushel Plus SmartPan System
  
  The Bushel Plus SmartPan System has revolutionized the checking- for-harvest-loss process. You can now quantify your grain loss and calibrate your loss monitor for immediate improvement! Savings from farmers have been reported anywhere from 2% to more than 10%. The Bushel Plus SmartPan System is PROVEN for corn, soybeans, and small grain such as wheat, oats, barley, canola and rice.
- Harvest Products, Miscellaneous
  
  Harvest Products, Miscellaneous
  
  Plastic Wear Blocks, ect.
- HCC Flip Reel Kit
  
  HCC Flip Reel Kit
  
  The HCC Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in soybeans, canola and other tall, stringy crops for a more efficient harvest.. Improve your harvest with the Flip Combine Reel Kit from HCC, which features a tine flipping action that enhances reel performance and ensures continuous crop flow, especially for tough crops.
- OEM Replacement Parts
  
  OEM Replacement Parts
  
  OEM replacement knife assemblies are sectional so they can be shipped by UPS. Same high quality parts as original equipment knife assemblies. Includes all hardware for assembly. We also have OEM replacement guards and sections available.
- Replacement Reel Bundle
  
  Replacement Reel Bundle
  
  If, for any reason, you are in need a replacement reel, please consider HCC Replacement Reel Bundles.
  
  HCC Replacement Reel Bundles consist of the reel’s center tube and the six bat tubes with the tines already installed.
- Retractable Poly Augers Fingers
  
  Retractable Poly Augers Fingers
  
  Keep your auger feeding smoothly and efficiently - with NO harm to the combine. The May Wes Poly Retractable Fingers are an ideal alternative to metal fingers because they are far less damaging when a metal finger breaks and is fed through the combine. Unlike metal, broken poly will disintegrate before causing equipment damage.

SCH KIT, MF WHT 8560,9520 18' (1/4" BB)

Product ID: SCK007014

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your kit before ordering.

More...

Price: $1,780.00

[Read Reviews] [Write A Review]

[Add to Wishlist]

SCH KIT, MF WHT 8560,9520 18' (3/8" BB)

Product ID: SCK007005

This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your kit before ordering.

More...

Price: $1,780.00

[Add to Wishlist]

18' SCH KIT - MASSEY FERGUSON - WHITE 8560, 9520 Series

SCH KIT, MF WHT 8560,9520 18' (1/4" BB)

SCH KIT, MF WHT 8560,9520 18' (3/8" BB)