For Most Combines, Windrowers, Mower Conditioners & Mowers

VIDEO:  See the SCH Easy Cut II cutterbar in action:   https://www.youtube.com/watch?v=__n1XjNW4es

Kit price includes all parts to convert to the SCH EasyCut II SYSTEM, including one pre-assembled knife with knifehead (without bearing), all guards and hardware, plus ten extra replacement sections with hardware and two extra guards. Please specify coarse (7 serrations per inch) or fine (11 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses.  Also includes 10mm socket and 10mm wrench for section bolts.

Note: The ideal cutter bar speed is 540 RPM for optimum cutting performance.

What's Included?

Each kit includes all the necessary parts to convert your current header into an Easy Cut II cutting system Along with this, each kit includes mounting instructions on how to assemble the kit.

Every conversion kit also includes 2 extra standard guards and a 10-pack of sections with mounting hardware.

To be specific, each SCH Easy Cut II Cutter bar kit includes: Knife assembly, rollers (if roller kit ordered); knifehead; guards; spacer plates or wear plates, mounting hardware, spare parts, and mounting instructions.

ProCut Sections   Stones and dirt are tough on knife sections.  They not only increase section wear but can also damage other parts of the platform.  Knife section quality is therefore of extreme importance.   Schumacher Pro Cut knife sections are completely thru-hardened, therefore extremely tough.  They don’t bend.  Therefore, when hitting large stones or other objects, damage to guards is eliminated which is not the case with regular sections.

The sections are fastened to the knifeback with a special serrated bolt and a flange nut.  The conically shaped and serrated body of the bolt locks tightly in the section and knifeback hole.  A tight and secure connection is the result.  At the same time, sections can be quickly changed.

Double Guards  In the last decades, two types of double guards have become dominant in the market: the forged guard and the Schumacher steel guard.  What makes the SCH Easy Cut steel guard so special?  The SCH Easy Cut guard is manufactured using a special alloy steel.  A subsequent special hardening process gives the guard extremely high hardness, durability and wear life.  Another advantage is the much higher vertical and lateral strength of the guard.  Less guard breakage.  The angled cutting edges of the guard hold the crop material better, resulting in a cleaner cut and a better flow of material.  This also results in less power needed to cut the material.

•    EasyCut II blunt guard eliminates spearing of residue

•    EasyCut II guard gets more crop through the cutting system

•    SCH knife system never needs adjustment

•    SCH guards bolt to top and bottom of platform

•    SCH guards are fully heat treated

•    SCH guards have two beveled cutting edges

•    SCH sections are fully heat treated

•    SCH sections will not bend

•    Optional SCH rollers improve performance

•    Optional SCH rollers reduce friction & vibration