The following is a list of all the Categories, Products and Feature Articles on our site. We hope it will assist you in finding what you're looking for.
| #'s | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All |
Categories
Eliminating the Reel - Auger Gap
The revolutionary, patent-pending design of the Orbit Reel is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
The revolutionary, patent-pending design of the Orbit Reel is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
Run your head closer to the ground without pushing and piling soil and you will put more crop in the combine even in wet sticky conditions. May Wes Poly Skid Shoes are sold in complete kits to outfit an enitre grain head or as individual replacement parts.
- Quick Finger and Snap-On Replacement Reel Tines
The Quick Finger is a replacement plastic finger to repair pipe reel plastic fingers quickly and easily.
May Wes’ Snap-On Replacement Tines replaces damaged or shortened reel tines in seconds. The Snap-On Tines easily snap over the top of the original factory finger without any tools for a quick and secure fit.
- Radura OEM Replacement Guards
OEM Replacement Guards available for AGCO, Case-IH and John Deere.
- Radura OEM Replacement Sections
Radura OEM Replacement Sections available for AGCO, Case-IH, John Deere 3" cutting system, John Deere 4" cutting system and New Holland.
- Replacement Reel Finger Tines (Specialty and OEM)
Replacement reel tines - specialty and OEM - to match almost any reel on the market and deliver more grain to the combine!
SCH crop lifters help lift and feed down crops and are essential in the harvest of different crops such as down wheat, oats, milo and other common cereal grains.
SCH Croplifters for OEM guards, SCH EasyCut I and SCH EasyCut II guards.
The SCH Easy Cut II cutterbar system eliminates the need for any adjustments, meaning more uptime and less maintenance. High quality spring steel guards, completely hardened sections and roller guides give this sickle bar system durability and low maintenance.
The SCH Pro Flex Lifter is specially designed, and often times essential, for the harvest of “downed” crops, whether it be because of snow, wind or heavy rains. Designed for edible beans, lentils, peas and downed soybeans.
Most knife drives lose stroke length and force.
The SCH Pro-Drive’s planetary gear system is in rotation at all times. This produces a 100% linear knife movement, compared with wobble boxes or other oscillating and pendulum drives.
Click here for model availability & pricing
Click here for model availability & pricing
Click here for model availability & pricing
Click here for model availability & pricing
Click Here for Model Availability & Pricing
10' SCH KIT - AGCO H/C, P/D 1 PC HEAD
10' SCH KIT - AGCO H/C, P/D 2 PC HEAD
10' SCH KIT - HESSTON PT10, PT 12
10' SCH KIT - MASSEY FERGUSON - CLAAS 36,44
10' SCH KIT - NEW HOLLAND 479, 488 Series
10' SCH KIT- AGCO H/C, SERIES 2
VisionWorks Standard and High Definition Wired Camera System Kits with 10-inch monitor
May Wes UHMW poly Ear Savers for Case-IH 1000 Series
1004, 1005 ,1006, 1007, 1008, 3006, 3007, 3008, 3009, 3010, 3309
18 Degree Blade
1004, 1005 ,1006, 1007, 1008, 3006, 3007, 3008, 3009, 3010, 3309
11 Degree Blade
11 Degree Blade
1162, 1165, DC2345, DC2365, DC2412, DC2415, DC2418
10 Degree Blades
12' Roller Guide Kit - AGCO H/C, P/D 1 PC HEAD
12' Roller Guide Kit- AGCO H/C, SERIES 2
Precision Planting's CleanSweep Row Cleaner Air Control System - 12 Row Planter
12' SCH KIT - AGCO EARLY 300 SERIES
12' SCH KIT - AGCO H/C, P/D 1 PC HEAD
12' SCH KIT - AGCO H/C, P/D 2PC HEAD
12' SCH KIT - Case-IH 1490, 1590
12' SCH KIT - CIH 4000, 5000 Series
12' SCH KIT - HESSTON 1160, 8200
12' SCH KIT - HESSTON PT10, PT 12
12' SCH KIT - JD 1600 with bearing knifehead
12' SCH KIT - MACDON 5000, 5020
12' SCH KIT - MASSEY FERGUSON - CLAAS 36,44
12' SCH KIT - MASSEY FERGUSON 655, 675, 775, 785
12' SCH KIT - MASSEY FERGUSON 775
12' SCH KIT - NEW HOLLAND 114 Series
12' SCH KIT - NEW HOLLAND 1475, 2450, 2550, 2300 Series
12' SCH KIT - NEW HOLLAND 1496 Series
12' SCH KIT - NEW HOLLAND 461, 469 Series
12' SCH KIT - NEW HOLLAND 490 Series
12' SCH KIT - NEW HOLLAND 495, 1495 Series
12' SCH KIT - NEW HOLLAND 499, 1499, 1469, 1496 Series
12' SCH KIT - NEW HOLLAND 910 Series
12' SCH KIT- AGCO H/C, SERIES 2
12.5' Roller Guide Kit - CASE-IH 4000
120 Degree - Standard Definition
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
Case-IH 1200 series with DeltaForce
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with DeltaForce
1200 series with one spring down pressure
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with one spring down pressure
1200 series with one spring down pressure
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Case-IH 1200 series with one spring down pressure
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with SureForce
1200 series with two spring down pressure
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with two spring down pressure
1200 series with Two Spring Down Pressure
PPS No-Ream Complete Arm Kits
Case-IH 1200 Series with two spring down pressure
FENDT 12130 SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
11 Degree Blade
FENDT 1270N SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1270S SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1290N SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1290S SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
13' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
13' Roller Guide Kit - AGCO EARLY 300 SERIES
13' Roller Guide Kit - AGCO H/C, P/D 1 PC HEAD
13' Roller Guide Kit - AGCO H/C, P/D 2 PC HEAD
13' Roller Guide Kit - CIH 820
13' Roller Guide Kit - JD FLEX 213
13' Roller Guide Kit- AGCO H/C, SERIES 2
13' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
13' SCH KIT - AGCO EARLY 300 SERIES
13' SCH KIT - AGCO H/C, P/D 1 PC HEAD
13' SCH KIT - AGCO H/C, P/D 2 PC HEAD
13' SCH KIT - NEW HOLLAND 972 Series
13' SCH KIT- AGCO H/C, SERIES 2
11 Degree Blade
18 Degree Blade
11 Degree Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
11 Degree Top Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
11 Degree Bottom Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
18 Degree Top Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
18 Degree Bottom Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
11 Degree Top Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
11 Degree Bottom Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
18 Degree Top Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
18 Degree Bottom Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
11 Degree Top Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
11 Degree Bottom Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
18 Degree Top Bevel Blade
1316S, 1373, 1376, 1393, 9313D, 9313S, 9316D, 9316S
18 Degree Bottom Bevel
1320 (HD disc), 1326 (HD disc), 1327 (HD disc)
Dome blade
11 Degree Bottom Bevel Blade
11 Degree Top Bevel Blade
18 Degree Bottom Bevel Blade
18 Degree Top Bevel Blade
1345, 1355, 1365, 1372, 1375, 9070, 9075, 9080, 9175, 9185, 9190, 9192, 5070, 5512, 5515, 6070
10 Degree Blade
1345, 1355, 1365, 1372, 1375, 9070, 9075, 9080, 9175, 9185, 9190, 9192, 5070, 5512, 5515, 6070
11 Degree Bottom Bevel Blade
1345, 1355, 1365, 1372, 1375, 9070, 9075, 9080, 9175, 9185, 9190, 9192, 5070, 5512, 5515, 6070
11 Degree Top Bevel Blade
1345, 1355, 1365, 1372, 1375, 9070, 9075, 9080, 9175, 9185, 9190, 9192, 5070, 5512, 5515, 6070
18 Degree Bottom Bevel Blade
1345, 1355, 1365, 1372, 1375, 9070, 9075, 9080, 9175, 9185, 9190, 9192, 5070, 5512, 5515, 6070
18 Degree Top Bevel Blade
14' Roller Guide Kit - AGCO H/C, P/D 2 PC HEAD
14' Roller Guide Kit - CASE-IH 4000
14' Roller Guide Kit - MASSEY FERGUSON 885 Series
14' SCH KIT - AGCO H/C, P/D 1 PC HEAD
14' SCH KIT - AGCO H/C, P/D 2 PC HEAD
14' SCH KIT - Case-IH 1490, 1590
14' SCH KIT - CIH 4000, 5000 Series
14' SCH KIT - CIH 8370, 8830 Series
14' SCH KIT - CIH 8840, 8870 Series
14' SCH KIT - CIH HDX141 Series
14' SCH KIT - HESSTON 1160, 8200
14' SCH KIT - HESSTON 1265 Hydra Swing
14' SCH KIT - Hesston 8400, 9125
14' SCH KIT - JD 1600 with bearing knifehead
14' SCH KIT - MACDON 5000, 5020
14' SCH KIT - MASSEY FERGUSON 785
14' SCH KIT - MASSEY FERGUSON 885 Series
14' SCH KIT - NEW HOLLAND 1118 Series
14' SCH KIT - NEW HOLLAND 114 Series
14' SCH KIT - NEW HOLLAND 116, 1116 Series
14' SCH KIT - NEW HOLLAND 1475, 2450, 2550, 2300 Series
14' SCH KIT - NEW HOLLAND 910 Series
14' SCH KIT- NEW HOLLAND 1100 Series
PPS No-Ream Complete Arm Kits
Case-IH 1200 Series with two spring down pressure - 14" Parallel Arm
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Case-IH 1200 series with one spring down pressure; 14" Parallel Arm
PPS No-Ream Complete Arm Kits
Case-IH 800, 900, 950, 955, 1200, 5400SS, 5500SS - 14" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with one spring down pressure, 14" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with SureForce, 14" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with two spring down pressure, 14" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 800, 900, 950, 955, 5400SS, 5500SS, 14" Parallel Arm
140 Degree - Standard Definition
15' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
15' Roller Guide Kit - AGCO EARLY 300 SERIES
15' Roller Guide Kit - AGCO H/C, P/D 1 PC HEAD
15' Roller Guide Kit - AGCO H/C, P/D 2 PC HEAD
15' Roller Guide Kit - CIH 1010
15' Roller Guide Kit - CIH 1020
15' Roller Guide Kit - CIH 820
15' Roller Guide Kit - JD FLEX 215 & 915
15' Roller Guide Kit - MACDON 972, D60
15' Roller Guide Kit - MASSEY FERGUSON - CLAAS 8450, 8460 Series
15' Roller Guide Kit - MASSEY FERGUSON - WHITE 9300 Series
15' Roller Guide Kit - NEW HOLLAND 972 Series
15' Roller Guide Kit- AGCO H/C, SERIES 2
15' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
15' SCH KIT - AGCO EARLY 300 SERIES
15' SCH KIT - AGCO H/C, P/D 1 PC HEAD
15' SCH KIT - AGCO H/C, P/D 2 PC HEAD
15' SCH KIT - JD FLEX 215 & 915
15' SCH KIT - MASSEY FERGUSON - CLAAS 8450, 8460 Series
15' SCH KIT - MASSEY FERGUSON - WHITE 9300 Series
15' SCH KIT - MASSEY FERGUSON 655, 675, 775, 785
15' SCH KIT - NEW HOLLAND 972 Series
15' SCH KIT- AGCO H/C, SERIES 2
16' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
16' Roller Guide Kit - AGCO EARLY 300 SERIES
16' Roller Guide Kit - JD FLEX 216
16' Roller Guide Kit - MASSEY FERGUSON - WHITE 8920 Series
16' Roller Guide Kit - NEW HOLLAND 972, 973, 73C & 74C Series
16' Roller Guide Kit- AGCO H/C, SERIES 2
Precision Planting's CleanSweep Row Cleaner Air Control System - 16 Row Planter
16' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
16' SCH KIT - AGCO EARLY 300 SERIES
16' SCH KIT - AGCO H/C, P/D 1 PC HEAD
16' SCH KIT - AGCO H/C, P/D 2 PC HEAD
16' SCH Kit - CIH 8840, 8870 Series
16' SCH KIT - CIH HDX161 Series
16' SCH KIT - CIH HDX162 Series
16' SCH KIT - Hesston 8400, 9125
16' SCH KIT - JD 1600 with bearing knifehead
16' SCH KIT - MACDON 5000, 5020
16' SCH KIT - MASSEY FERGUSON - WHITE 8920 Series
16' SCH KIT - MASSEY FERGUSON 885 Series
16' SCH KIT - NEW HOLLAND 1100 Series
16' SCH KIT - NEW HOLLAND 1114 Series
16' SCH KIT - NEW HOLLAND 1118 Series
16' SCH KIT - NEW HOLLAND 116, 1116 Series
16' SCH KIT - NEW HOLLAND 1475, 2450, 2550, 2300 Series
16' SCH KIT - NEW HOLLAND 2326 Series
16' SCH KIT - NEW HOLLAND 912 Series
16' SCH KIT - NEW HOLLAND 972, 973, 73C & 74C Series
16' SCH KIT- AGCO H/C, SERIES 2
16.5' Roller Guide Kit - CIH 1020
16.5' Roller Guide Kit - CIH 820
162 (HD), 165, 2340 (S/N<7602), 2360 (S/N<7602), DC2340, DC2360
10 Degree Blades
10 Degree Blades
17.5' Roller Guide Kit - CIH 1020
17.5' Roller Guide Kit - CIH 820
18' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
18' Roller Guide Kit - AGCO EARLY 300 SERIES
18' Roller Guide Kit - JD FLEX 218 & 918
18' Roller Guide Kit - JD FLEX 618
18' Roller Guide Kit - JD RIGID 218
18' Roller Guide Kit - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
18' Roller Guide Kit - NEW HOLLAND 972, 973 Series
18' Roller Guide Kit- AGCO H/C, SERIES 2
18' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
18' SCH KIT - AGCO EARLY 300 SERIES
18' SCH KIT - AGCO H/C, P/D 1 PC HEAD
18' SCH KIT - AGCO H/C, P/D 2 PC HEAD
18' SCH KIT - CIH HDX182 Series
18' SCH KIT - Hesston 8400, 9125
18' SCH KIT - JD FLEX 218 & 918
18' SCH KIT - MASSEY FERGUSON - WHITE 8560, 9520 Series
18' SCH KIT - MASSEY FERGUSON 655, 675, 775, 785
18' SCH KIT - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
18' SCH KIT - NEW HOLLAND 1475, 2450, 2550, 2300 Series
18' SCH KIT - NEW HOLLAND 972, 973 Series
18' SCH KIT- AGCO H/C, SERIES 2
AGCO 1841: RASSPE BALER SINGLE KNOTTER, RS 6003, W/O CAM GEAR
Massey Ferguson Square Baler 1841 - Baler Knotter
Massey Ferguson Square Baler 1842 - Baler Knotter
CHALLENGER SQUARE BALER 1842: RASSPE SINGLE KNOTTER, RS 6003
Massey Ferguson Square Baler 1843N - Rasspe Single Knotter
Massey Ferguson Square Baler 1843S - Rasspe Single Knotter
Massey Ferguson Square Baler 1844N - Rasspe Single Knotter
Massey Ferguson Square Baler 1844S - Rasspe Single Knotter
20' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
20' Roller Guide Kit - AGCO 8200
20' Roller Guide Kit - AGCO EARLY 300 SERIES
20' Roller Guide Kit - AGCO H/C, P/D 2 PC HEAD
20' Roller Guide Kit - CIH 1010
20' Roller Guide Kit - CIH 1020
20' Roller Guide Kit - CIH 3020
20' Roller Guide Kit - CIH 820
20' Roller Guide Kit - JD FLEX 220 & 920
20' Roller Guide Kit - JD FLEX 620
20' Roller Guide Kit - JD RIGID 220 & 920
20' Roller Guide Kit - MASSEY FERGUSON - CLAAS 8450, 8460 Series
20' Roller Guide Kit - MASSEY FERGUSON - WHITE 8560, 9520 Series
20' Roller Guide Kit - MASSEY FERGUSON - WHITE 8920 Series
20' Roller Guide Kit - MASSEY FERGUSON - WHITE 9300 Series
20' Roller Guide Kit - MASSEY FERGUSON 9850 Series
20' Roller Guide Kit - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
20' Roller Guide Kit - NEW HOLLAND 740CF
20' Roller Guide Kit - NEW HOLLAND 972, 973, 73C & 74C Series
20' Roller Guide Kit- AGCO H/C, SERIES 2
20' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
20' SCH KIT - AGCO EARLY 300 SERIES
20' SCH KIT - AGCO H/C, P/D 1 PC HEAD
20' SCH KIT - AGCO H/C, P/D 2 PC HEAD
20' SCH KIT - JD FLEX 220 & 920
20' SCH KIT - JD RIGID 220 & 920
20' SCH KIT - MASSEY FERGUSON - CLAAS 8450, 8460 Series
20' SCH KIT - MASSEY FERGUSON - WHITE 8560, 9520 Series
20' SCH KIT - MASSEY FERGUSON - WHITE 8920 Series
20' SCH KIT - MASSEY FERGUSON - WHITE 9300 Series
20' SCH KIT - MASSEY FERGUSON 9850 Series
20' SCH KIT - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
20' SCH KIT - NEW HOLLAND 740CF
20' SCH KIT - NEW HOLLAND 972, 973, 73C & 74C Series
20' SCH KIT- AGCO H/C, SERIES 2
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 800, 900, 950, 955, 5400SS, 5500SS, 20" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with two spring down pressure, 20" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with one spring down pressure, 20" Parallel Arm
PPS No-Ream Complete Arm Kits
Case-IH 800, 900, 950, 955, 1200, 5400SS, 5500SS - 20" Parallel Arm
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Case-IH 1200 series with one spring down pressure; 20" Parallel Arm
PPS No-Ream Complete Arm Kits
Case-IH 1200 Series with two spring down pressure - 20" Parallel Arm
PPS Premium Complete Flange Bushing Parallel Linkage Arm Rebuild Kits for Kinze 2000 series
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 2000 series planters
Split Row - Push Unit
Standard Row - Pull Unit
Standard Row - Pull Unit with DeltaForce
21' Roller Guide Kit - MACDON 972, D60
21' SCH KIT - MASSEY FERGUSON 655, 675, 775, 785
10 Degree Blade
Massey Ferguson Square Balers 2150: Rasspe Double Knotter
Massey Ferguson Square Balers 2160 - Rasspe Double Knotter
Massey Ferguson Square Balers 2170 - Rasspe Double Knotter
Massey Ferguson Square Baler 2170XD - Double Knotter
22' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
22' Roller Guide Kit - AGCO EARLY 300 SERIES
22' Roller Guide Kit - JD FLEX 222 & 922
22' Roller Guide Kit - JD FLEX 622
22' Roller Guide Kit - JD RIGID 222 & 922
22' Roller Guide Kit - MASSEY FERGUSON - WHITE 9300 Series
22' Roller Guide Kit - MASSEY FERGUSON 885 Series
22' Roller Guide Kit - NEW HOLLAND 972, 973 Series
22' Roller Guide Kit- AGCO H/C, SERIES 2
22' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
22' SCH KIT - AGCO EARLY 300 SERIES
22' SCH KIT - JD FLEX 222 & 922
22' SCH KIT - JD RIGID 222 & 922
22' SCH KIT - MASSEY FERGUSON - WHITE 9300 Series
22' SCH KIT - MASSEY FERGUSON 885 Series
22' SCH KIT - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
22' SCH KIT - NEW HOLLAND 972, 973 Series
22' SCH KIT- AGCO H/C, SERIES 2
22.5' Roller Guide Kit - CIH 1020
22.5' Roller Guide Kit - CIH 820
22.5' SCH KIT - NEW HOLLAND 972 Series
May Wes UHMW Poly Snout Savers for Case-IH 2200 Series
May Wes UHMW poly Ear Savers for Case-IH 2200 Series
G4 Stalk Stompers available for CIH 2200, 2400, 3200 & 3400 series 6 row cornheads ONLY.
G4 Stalk Stompers available for CIH 2200, 2400, 3200 & 3400 series 8 & 12 row cornheads ONLY.
Massey Ferguson Square Balers 2240 - Double Knotter
CHALLENGER SQUARE BALER 2240: RASSPE HD DOUBLE KNOTTER, RS 1450
CHALLENGER SQUARE BALER 2250: RASSPE HD DOUBLE KNOTTER, RS 1450
Massey Ferguson Square Balers 2250 - Double Knotter
Massey Ferguson Square Balers 2260 -Double Knotter
CHALLENGER SQUARE BALER 2260: RASSPE HD DOUBLE KNOTTER, RS 1450
Massey Ferguson Square Balers 2270 - Double Knotter
Massey Ferguson Square Balers 2270XD - Double Knotter
CHALLENGER SQUARE BALER 2270XD: RASSPE HD DOUBLE KNOTTER, RS 1450
CHALLENGER SQUARE BALER 2290: RASSPE HD DOUBLE KNOTTER, RS 1450
Massey Ferguson Square Balers 2290 - Double Knotter
Precision Planting's CleanSweep Row Cleaner Air Control System - 23 Row Planter
2310, DC1080, DC2330 (S/N <2226), DC2350, DM140, DM160
11 Degree Blades
24' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
24' Roller Guide Kit - AGCO EARLY 300 SERIES
24' Roller Guide Kit - CIH 1010
24' Roller Guide Kit - JD FLEX 224 & 924
24' Roller Guide Kit - JD RIGID 224
24' Roller Guide Kit - MASSEY FERGUSON - WHITE 8560, 9520 Series
24' Roller Guide Kit - MASSEY FERGUSON - WHITE 9300 Series
24' Roller Guide Kit - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
24' Roller Guide Kit - NEW HOLLAND 972, 973, 73C & 74C Series
24' Roller Guide Kit- AGCO H/C, SERIES 2
Precision Planting's CleanSweep Row Cleaner Air Control System - 24 Row Planter
24' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
24' SCH KIT - AGCO EARLY 300 SERIES
24' SCH KIT - JD FLEX 224 & 924
24' SCH KIT - MASSEY FERGUSON - WHITE 8560, 9520 Series
24' SCH KIT - MASSEY FERGUSON - WHITE 9300 Series
24' SCH KIT - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
24' SCH KIT - NEW HOLLAND 972, 973, 73C & 74C Series
24' SCH KIT- AGCO H/C, SERIES 2
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 1200 series with SureForce, 24" Parallel Arm
24.5' Roller Guide Kit - CASE-IH 4000
240, 260, 1314, 1315, 1320 (standard disc), 1326 (standard disc), 1327 (standard disc)
10 Degree Blade
May Wes UHMW poly Ear Savers for Case-IH 2400 Series
May Wes UHMW Poly Snout Savers for Case-IH 2400 Series
Will NOT fit Flex Draper
25' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
25' Roller Guide Kit - AGCO 300/700 SERIES
25' Roller Guide Kit - AGCO 5300, 5400
25' Roller Guide Kit - AGCO 5300, 5400
25' Roller Guide Kit - AGCO 8200
25' Roller Guide Kit - CASE-IH 2142, 2152
25' Roller Guide Kit - CATERPILLAR
25' Roller Guide Kit - CIH 1010
25' Roller Guide Kit - CIH 1020
25' Roller Guide Kit - CIH 3020
25' Roller Guide Kit - JD DRAPER 925
25' Roller Guide Kit - JD FLEX 625
25' Roller Guide Kit - JD FLEX 925
25' Roller Guide Kit - JD RIGID 925
25' Roller Guide Kit - MACDON 972, D60
25' Roller Guide Kit - MACDON FD125
25' Roller Guide Kit - MASSEY FERGUSON - CLAAS 8450, 8460 Series
25' Roller Guide Kit - MASSEY FERGUSON 220
25' Roller Guide Kit - MASSEY FERGUSON 9850 Series
25' Roller Guide Kit - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
25' Roller Guide Kit - NEW HOLLAND 740CF
25' Roller Guide Kit - NEW HOLLAND 94C
25' Roller Guide Kit - NEW HOLLAND 972, 973, 73C & 74C Series
25' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
25' SCH Kit - AGCO 300/700 SERIES
25' SCH KIT - CASE-IH 2142, 2152
25' SCH KIT - MASSEY FERGUSON - CLAAS 8450, 8460 Series
25' SCH KIT - MASSEY FERGUSON 220
25' SCH KIT - MASSEY FERGUSON 9850 Series
25' SCH KIT - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
25' SCH KIT - NEW HOLLAND 740CF
25' SCH KIT - NEW HOLLAND 92C, 94C
25' SCH KIT - NEW HOLLAND 971 Series
25' SCH KIT - NEW HOLLAND 972, 973, 73C & 74C Series
G4 Stalk Stompers available for Case-IH 2600, 4200 and 4400 series
265 (S/N<150000), 275 (S/N,<152000), 1350, 1360, 1460, 1470
10 Degree Blade
10 Degree Blade
27' Roller Guide Kit - AGCO 300/700 SERIES
27' SCH Kit - AGCO 300/700 SERIES
27' SCH KIT - MASSEY FERGUSON - WHITE 8560, 9520 Series
276, 311, 315, 316, 320, 326, 565, 568, 570, 575, 580, BC5050, BC5060, BC5070, BC5080
27P, 29P, 707W, 717W, 770W, 790W, 880W, 890W, 900W, 919W3, 919W4, 990W
280FP, 290FP, 380FPA, 380FPE, 346W, 356W, 366W
Martin-Till 2nd Stage Closer: Seals and levels air pockets left in seed trench to ensure ideal seed-to-soil contact. It easily mounts to most Double V Style OEM closing wheel brackets. Cam Adjust allows adjustment of pressure applied to press wheel.
Martin-Till 2nd Stage Closer: Seals and levels air pockets left in seed trench to ensure ideal seed-to-soil contact.
Will NOT fit Flex Draper
30' Roller Guide Kit - AGCO 300, 500, 800 & 8000 SERIES
30' Roller Guide Kit - AGCO 300/700 SERIES
30' Roller Guide Kit - AGCO 5100
30' Roller Guide Kit - AGCO 5300, 5400
30' Roller Guide Kit - AGCO 5300, 5400
30' Roller Guide Kit - AGCO 8200
30' Roller Guide Kit - CASE-IH 2042, 2052, 2062 Series
30' Roller Guide Kit - CASE-IH 2142, 2152
30' Roller Guide Kit - CASE-IH 2162 Series
30' Roller Guide Kit - CATERPILLAR
30' Roller Guide Kit - CIH 1010
30' Roller Guide Kit - CIH 1020
30' Roller Guide Kit - CIH 3020
30' Roller Guide Kit - JD DRAPER 930
30' Roller Guide Kit - JD FLEX 630
30' Roller Guide Kit - JD FLEX 930
30' Roller Guide Kit - JD RIGID 930
30' Roller Guide Kit - LEXION F30
30' Roller Guide Kit - MACDON 972, D60
30' Roller Guide Kit - MACDON 974
30' Roller Guide Kit - MACDON FD70, 75
30' Roller Guide Kit - MASSEY FERGUSON 9850 Series
30' Roller Guide Kit - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
30' Roller Guide Kit - NEW HOLLAND 740CF
30' Roller Guide Kit - NEW HOLLAND 94C
30' Roller Guide Kit - NEW HOLLAND 972, 973, 73C & 74C Series
30' SCH KIT - AGCO 300, 500, 800 & 8000 SERIES
30' SCH Kit - AGCO 300/700 SERIES
30' SCH KIT - CASE-IH 2142, 2152
30' SCH KIT - CIH 2042, 2052, 2062 Series
30' SCH KIT - JD RIGID 230 & 930
30' SCH KIT - MASSEY FERGUSON - CLAAS 8460
30' SCH KIT - MASSEY FERGUSON - WHITE 9330 Series
30' SCH KIT - MASSEY FERGUSON 220
30' SCH KIT - MASSEY FERGUSON 885 Series
30' SCH KIT - MASSEY FERGUSON 9850 Series
30' SCH KIT - MASSEY FERGUSON -WHITE 9750 ROTARY SERIES
30' SCH KIT - NEW HOLLAND 740CF
30' SCH KIT - NEW HOLLAND 92C, 94C
30' SCH KIT - NEW HOLLAND 972, 973, 73C & 74C Series
PPS Premium Complete Flange Bushing Parallel Linkage Arm Rebuild Kits for Kinze 3000 series
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 3000 planters
Split Row - Push Unit
Standard Row - Pull Unit
Standard Row - Pull Unit with DeltaForce
Standard Row - Pull Unit with SureForce
3006, 3007, 3008, 3009, 3010, 3309
11 Degree Blade
3006, 3007, 3008, 3009, 3010, 3309
18 Degree Blade
Precision Planting's CleanSweep Row Cleaner Air Control System - 31 Row Planter
7 Degree Blade
14 Degree Blade
18 Degree Blade
Dome blade
Precision Planting's CleanSweep Row Cleaner Air Control System - 32 Row Planter
May Wes UHMW Poly Snout Savers for Case-IH 3200 Series
May Wes UHMW poly Ear Savers for Case-IH 3200 Series
3204 (HD), 3205 (HD), 3206 (HD), 3309 (HD)
7 Degree Blade
3204 (HD), 3205 (HD), 3206 (HD), 3309 (HD)
18 Degree Blade
3204 (SD), 3205 (SD), 3206 (SD), 3309 (SD)
11 Degree Blade
3312, 3315, 9170, 9180, 9190, 9192
18 Degree Bottom Bevel Blade
3312, 3315, 9170, 9180, 9190, 9192
11 Degree Bottom Bevel Blade
3312, 3315, 9170, 9180, 9190, 9192
11 Degree Top Bevel Blade
3312, 3315, 9170, 9180, 9190, 9192
18 Degree Top Bevel Blade
3312, 3315, 9170, 9180, 9190, 9192
10 Degree Blade
May Wes UHMW poly Ear Savers for Case-IH 3400 Series
May Wes UHMW Poly Snout Savers for Case-IH 3400 Series
Will NOT fit Flex Draper
35' Roller Guide Kit - AGCO 5300, 5400
35' Roller Guide Kit - AGCO 5300, 5400
35' Roller Guide Kit - AGCO 8200
35' Roller Guide Kit - CASE-IH 2162 Series
35' Roller Guide Kit - CIH 3020
35' Roller Guide Kit - JD FLEX 635
35' Roller Guide Kit - LEXION F35
35' Roller Guide Kit - MACDON FD70, 75
35' Roller Guide Kit - MASSEY FERGUSON 220
35' Roller Guide Kit - NEW HOLLAND 740CF
35' SCH KIT - NEW HOLLAND 740CF
35' SCH KIT - NEW HOLLAND 74C Series
36' Roller Guide Kit - AGCO 5100
36' Roller Guide Kit - CASE-IH 2042, 2052, 2062 Series
36' Roller Guide Kit - JD DRAPER 935
36' Roller Guide Kit - MACDON 972, D60
36' Roller Guide Kit - MACDON 973
36' Roller Guide Kit - MACDON 974
36' Roller Guide Kit - NEW HOLLAND 94C
Precision Planting's CleanSweep Row Cleaner Air Control System - 36 Row Planter
36' SCH KIT - CIH 2042, 2052, 2062 Series
36' SCH KIT - NEW HOLLAND 92C, 94C
40' Roller Guide Kit - CASE-IH 2162 Series
40' Roller Guide Kit - LEXION F540
40' Roller Guide Kit - MACDON FD70, 75
May Wes UHMW poly Ear Savers for John Deere 40 Series
10 Degree Blade
10 Degree Blade
May Wes UHMW Poly Snout Savers for Case-IH 4400 Series
May Wes UHMW poly Ear Savers for Case-IH 4400 Series
442 (HD Disc), 452 (HD Disc), 462 (HD Disc), 463 (HD Disc)
10 Degree Blade
442 (S/N < Z4750), 452, 462 (S/N < Z1643)
11 Degree Blade
442 (S/N > Z4751), 462 (S/N > Z4751), 463
10 Degree Blade
45' Roller Guide Kit - MACDON FD70, 75
HESSTON 4655 - RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
HESSTON 4690: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4690S - RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4750 - RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4755 - RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4760: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4790: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
Precision Planting's CleanSweep Row Cleaner Air Control System - 48 Row Planter
HESSTON 4900: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 4900 series planters
HESSTON 4910: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
4AG Planter Gauge Wheel Tires
The Most Durable on the Market! Created for No-Till Planting into Cotton Stubble
4AG Gauge Wheel Tires for John Deere, Kinze and White. Available in 4.5" and 3" tires.
4AG Planter Gauge Wheel Tires - Drills
The Most Durable on the Market! Created for No-Till Planting into Cotton Stubble 4AG Gauge Wheel Tires for John Deere, Kinze and White. Available in 4.5" and 3" tires. 4AG Gauge Wheel Tires for John Deere, Kinze and White. Available in 4.5" and 3" tires.
VisionWorks Standard Wired Camera System Kits with 5-inch monitors
MudSmith Gauge Wheel Assemblies - 5/8" or 16mm Bearing
MudSmith Gauge Wheel Assemblies - 5/8" or 16mm Bearing
MudSmith Gauge Wheel Assemblies - 5/8" or 16mm Bearing
MudSmith Gauge Wheel Assemblies - 5/8" or 16mm Bearing
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 5000, 6000 and 8000 series planters
18 Degree Blade
10 Degree Blade
11 Degree Blade
5209 (S/N <16013), 5212 (S/N <16012)
11 Degree Blade
5209 (S/N>16013), 5212 (S/N>16013), 5312, 5406, 5407, 5408, 5409, 5410 (S/N>1007481), 5512
18 Degree Blade
5209 (S/N>16013), 5212 (S/N>16013), 5312, 5406, 5407, 5408, 5409, 5410 (S/N>1007481), 5512
11 Degree Blade
11 Degree Blade
Precision Planting's CleanSweep Row Cleaner Air Control System - 54 Row Planter
590, 595, BB940, BB960, BB9050, BB9060, BB9070, BB9080, 230, 330, 340
Precision Planting's CleanSweep Row Cleaner Air Control System - 6 Row Planter
May Wes UHMW Poly Snout Savers for John Deere 600 Series
May Wes UHMW poly Ear Savers for John Deere 600 Series
PPS Premium Complete Parallel Arm Rebuild Kits for White 6000 series
7 Degree Blade
14 Degree Blade
630A, 640A, 645A, 630B, 640B, 645B, 630C, 640C, 645C
7' SCH KIT - HESSTON 1070, 1071
7' SCH KIT - MASSEY FERGUSON 725
7' SCH KIT - NEW HOLLAND 450, 455
7' SCH KIT - NEW HOLLAND 451, 456
7' SCH KIT - NEW HOLLAND 467 Series
7' SCH KIT - NEW HOLLAND 472, 477, 478 Series
7' SCH KIT - NEW HOLLAND 474, 489 Series
VisionWorks Standard and High Definition Wired Camera System Kits with 7-inch monitor
May Wes UHMW Poly Snout Savers for John Deere 700 Series
AGCO 7120: RASSPE BALER SINGLE KNOTTER, RS 6003, W/O CAM GEAR
725, 8309, 8312, 8315, 8850, DC515
11 Degree Bottom Bevel Blade
725, 8309, 8312, 8315, 8850, DC515
11 Degree Top Bevel Blade
725, 8309, 8312, 8315, 8850, DC515
18 Degree Bottom Bevel Blade
725, 8309, 8312, 8315, 8850, DC515
10 Degree Blade
725, 8309, 8312, 8315, 8850, DC515
18 Degree Top Bevel Blade
Precision Planting's CleanSweep Row Cleaner Air Control System - 8 Row Planter
May Wes UHMW poly Ear Savers for Case-IH 800 Series
800, 900, 950, 955, 5400SS, 5500SS
PPS Premium Complete Flange Bushing Parallel Arm Kit for Case-IH, 800, 900, 950, 955, 5400SS, 5500SS
800, 900, 950, 955, 5400SS, 5500SS
PPS No-Ream Complete Arm Kits Case-IH 800, 900, 950, 955, 1200, 5400SS, 5500SS
800, 900, 955, 1200, 5400SS, 5500SS
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
Case-IH 800, 900, 955, 1200, 5400SS, 5500SS
PPS Premium Complete Parallel Arm Rebuild Kits for White 8000 series
8435, RS451, RS551, RS561, RS561A
845, 846A, 855, 856, 856A, 945, 946A, 955, 956
CASE-IH 8555 - SINGLE KNOTTER, RS 6003, W/O CAM GEAR
CASE-IH 8570 - SINGLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH 8575 - HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CASE-IH 8576 - HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CASE-IH 8580 - HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CASE-IH 8585 - HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CASE-IH 8590 - HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
18 Degree Top Bevel Blade
11 Degree Top Bevel Blade
10 Degree Blade
11 Degree Bottom Bevel Blade
18 Degree Bottom Bevel Blade
9' SCH KIT - HESSTON 1085, 1090, 1091, 1095
9' SCH KIT - HESSTON PT10, PT 12
9' SCH KIT - JD 1207, 1209, 1219
9' SCH KIT - JD 1207, 1209, 1219
9' SCH KIT - MASSEY FERGUSON 81 Series
9' SCH KIT - MASSEY FERGUSON 925
9' SCH KIT - NEW HOLLAND 1465 Series
9' SCH KIT - NEW HOLLAND 450, 455
9' SCH KIT - NEW HOLLAND 451, 456
9' SCH KIT - NEW HOLLAND 461, 469 Series
9' SCH KIT - NEW HOLLAND 474, 489 Series
9' SCH KIT - NEW HOLLAND 479, 488 Series
9' SCH KIT - NEW HOLLAND 492 Series
9' SCH KIT - NEW HOLLAND 905 Series
90 Degree - Standard Definition
May Wes UHMW poly Ear Savers for John Deere 90 Series
May Wes UHMW Poly Snout Savers for John Deere 90/40 Series
May Wes UHMW poly Ear Savers for Case-IH 900 Series
G4 Stalk Stompers available for Case-IH 900, 1000 series 6 row cornheads ONLY
G4 Stalk Stompers available for Case-IH 900, 1000 series 8 row cornheads ONLY
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 9000 series planters
11 Degree Top Bevel Blade
18 Degree Top Bevel Blade
10 Degree Blade
18 Degree Bottom Bevel Blade
11 Degree Bottom Bevel Blade
May Wes UHMW poly Ear Savers for New Holland 96C
G4 Stalk Stompers available for NH 96C, 98C, 98D and 996 series 6 row cornheads ONLY.
G4 Stalk Stompers available for NH 96C, 98C, 98D and 996 series 8 & 12 row cornheads ONLY.
May Wes UHMW poly Ear Savers for New Holland 96D
May Wes UHMW poly Ear Savers for New Holland 98C
May Wes UHMW poly Ear Savers for New Holland 98D
May Wes UHMW poly Ear Savers for New Holland 99D
G4 Stalk Stompers available for New Holland 99C and 980 series.
Weed Control the New & Improved Way
The A1 Mini Weeder is much faster weed control - no more chopping weeds manually. It is ideal for crops such as vegetables, watermelon, pumpkin, squash, tobacco, and more!
Accessories for Hitches and Bumpers
Parts and accessories for Schuck cushion hitches.
AccuVac Service Parts
Acra-Plant specializes in no-till & reduced-tillage planting.
Acra-Plant products include: Notched Disc Openers, Fertilizer Knives, Quick Change Fertilizer Knives, V-Slice Inserts and V-Shots, and Blu-Jet Parts.
Made of 26% Chrome-Alloy for Longer Life.
V-crown ripper “Spring” point, Blu-Jet Sub-Tiller II with 1-1/2” shank.
V-crown ripper “Fall” point, Blu-Jet Sub-Tiller II with 1-1/2” shank.
Shin guard, Blu-Jet Sub-Tiller II with 1-1/2” shank.
Acra-Plant Conservation Ripper Points
Acra-Plant Conservation Ripper Points: The CRP line of points is the newest evolution of Subsoiler & Ripper points designed by combining Acra-Plant technology with the years of experience ShieldAg has in supplying long-lasting high-performance Chrome Carbibe Ripper Points.
Acra-Plant Notched Disc Openers
Convert your standard planter to a No-Till machine without increasing row unit down-pressure and without the high cost of residue management systems or coulters.
- Acra-Plant notched discs and inserts turn your present planter into the ultimate narrow profile no-till system insert
- 11 & 15 notch discs aggressively slice through the toughest residue
Acra-Plant V-Slice Inserts & V-Shots
Better stands due to improved seed-to-soil contact.
• Eliminates seed roll-and-bounce for uniform and early emergence
• Acra-Tuff chrome carbide for long wear life
Acra-Plant V-Shots: Apply starter fertilizer where it belongs, below the seed.
The Acre Plus Seed Box Extension / Topper adds one bushel to seed box capacity so you can plant more acres between fills. It is one-piece plastic snap-on extensions require no modifications to the original box and uses the existing seed box lid, and are available in original equipment colors.
Radura Rotary Disc Mower Blades for AGCO
AGCO 1841: RASSPE BALER SINGLE KNOTTER, RS 6003, W/O CAM GEAR
AGCO 7120: RASSPE BALER SINGLE KNOTTER, RS 6003, W/O CAM GEAR
Please call for complete Reel replacement options for other combines and swathers not listed.
G4 Stalk Stomper kits available for AGCO: Massey 3000, Gleaner 3000 and Challenger corn heads.
G4 Stalk Stompers available for AGCO cornheads
OEM replacement guards available for AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250
SCH EasyCut Cutter Bar Conversion Kits for AGCO - Gleaner
AGCO 300 - 8000 Series Headers
SCH Pro-Drive Kits for AGCO 300, 500, 800, 8000 Series Flex Headers
AGCO 300 Series, Early Style - Roller Guide Kit
AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250
AGCO 300, 500, 800 & 8000 Series
AGCO 300, 500, 800 & 8000 Series - Roller Guide Kit
AGCO 300/700 Series - Roller Guide Kits
AGCO 400, 500, 700/700C, 800/800C, 7000, 8000 & Series III (1987 & Newer)
Poly Skid Shoes available for 13', 15', 16', 18', 20', 22', 24', 25' and 30'.
Poly Skid Shoes available for 20', 25', 30' and 35'.
AGCO 9250 - After S/N FHD1101 High Profile
Poly Skid Shoes available for 25', 30', 35' and 40'.
AGCO 9250 - After S/N FHD1101 Low Profile
Poly Skid Shoes available for 25', 30', 35' and 40'.
AGCO 9250 - S/N AHD01101 - CHD01100 High Profile
Poly Skid Shoes available for 25', 30', 35' and 40'.
AGCO 9250 - S/N AHD01101-FHD01100 Low Profile
Poly Skid Shoes available for 25', 30', 35' and 40'.
AGCO 9250 - S/N CHD01101-FHD01100 High Profile
Poly Skid Shoes available for 25', 30', 35' and 40'.
AGCO 9255 - After S/N HHD01101 Low Skid
Poly Skid Shoes available for 25', 30', 35', 40' and 45'.
AGCO 9255 - After S/N HHD01101 Standard Skid
Poly Skid Shoes available for 25', 30', 35', 40' and 45'.
AGCO 9255 - Prior to S/N HHD01101
Poly Skid Shoes available for 25', 30', 35' and 40'.
Please select if you are currently running the AGCO cutter bar.
AGCO Hart Carter, Pitman Drive (1pc head)
AGCO Hart Carter, Pitman Drive (1pc head) - Roller Guide Kit
AGCO Hart Carter, Pitman Drive (2pc head)
AGCO Hart Carter, Pitman Drive (2pc head) - Roller Guide Kit
AGCO Hart Carter, Series 2 - Roller Guide Kit
Poly Skid Shoes available for 13', 15', 16', 18', 20', 22' and 24'.
SCH EasyCut Cutter Bar Conversion Kits for AGCO - Gleaner
AgroEcoPower performance-enhancing tunes provide more power and torque while using less fuel! AgroEcoPower optimizes air-to-fuel ratio, injection duration, fuel consumption, and torque limiter parameters; Lowers fuel consumption by 5 to 18%; Increases performance by up to 30% and torque by up to 25% in diesel engines.
SmartClean Air Control Kit that includes compressor (if required), necessary air line kit and air cylinders.
Air Control Systems for Row Cleaners
The following three Row Cleaner Air Control Systems allow the operator to raise and lower floating row units on-the-go by varying the amount of air pressure in the cylinders. Since adjustments are easy, you will make adjustments when you should. Precision Planting's CleanSweep Row-Cleaner Air Control System; Martin-Till Manual Bidirectional Air Control System; and Martin-Till SmartClean Row-Cleaner Air Control System
The Air Design drill scraper will outlast and outwear standard cast scrapers and they can’t flip over and fall off. The scraper features a special tungsten carbide cutting edge.
- Aggressive cleaning action
- Enhances seed depth placement accuracy
- Special Tungsten Carbide Edge
-
Aggressive cleaning action
-
Enhances seed depth placement accuracy
-
Special Tungsten Carbide Edge
The Air Filter Blaster extends the life of your filters
• Reduces fuel consumption
• Increases the life of your equipment
• Increases engine performance
• Reduces fuel consumption
• Increases the life of your equipment
• Increases engine performance
The Air Filter Blaster extends the life of your filters
• Reduces fuel consumption • Increases the life of your equipment
• Increases engine performance
The Air Filter Blaster extends the life of your filters
• Reduces fuel consumption
• Increases the life of your equipment
• Increases engine performance
7 Degree Blade
AM203, AM243. AFA243, AM283, AFA283, AFL283, AMT283, AM323, AMT323, AM403, Big M, Big MII
10 Degree Blade
11 Degree Blade
11 Degree Blade
Rebounder Seed Deflectors for Amity Drill
Rebounder Seed Deflectors for Amity Drill
The Anaconda Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 1-1/4" in diameter.
The Anaconda Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 1-1/4" in diameter.
The Anaconda Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 1-1/4" in diameter.
The Anaconda Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 1-1/4" in diameter.
Will fit hoses up to 1-1/4" in diameter
The Anaconda Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 1-1/4" in diameter.
Auger Trough Liner - Corn Heads
Save Money on Repairs. Durable Poly won’t rust. When the corn head is covered with the 1/8" thick UHMW poly May Wes Auger Trough Liners, wet grain and moisture will not cause corrosion. Auger Trough Liners are for Case-IH, John Deere and New Holland corn heads
Auger Trough Liners - Grain Heads
When the grain head is covered with the 1/8" thick UHMW poly May Wes Auger Trough Liners, wet grain and moisture will not cause corrosion.
May Wes Auger Trough Liners covers the full length of the floor under the auger - not just the feed opening.
B4 is a blend of 4 highly beneficial bacillus microorganisms: Bacillus licheniformis, Bacillus amyloliquefaciens, Bacillus pumilus and Brevibacillus laterosporous. B4 solubilizes phosphorous(P), zinc (Zn) and iron (Fe) that are in the soil and unavailable to your crop.
B4 is a blend of 4 highly beneficial bacillus microorganisms: Bacillus licheniformis, Bacillus amyloliquefaciens, Bacillus pumilus and Brevibacillus laterosporous. B4 solubilizes phosphorous(P), zinc (Zn) and iron (Fe) that are in the soil and unavailable to your crop.
BAC - Botanical Antimicrobial Cleaner
BAC Ag is a much safer, organically grown antimicrobial, anti-fungal and cost-effective Botanical Antimicrobial Cleaner. With over 20 years of research, comprised of expert chemists and engineers, made with organic ingredients, and recognized as safe under FIFRA by the EPA and FDA.
Basques sugar maple hardwood lump charcoal is made from 100% Canadian hardwood logs.
New Holland Square Baler - High-Density Double Knotter, RS 1450, W/ and W/O Cam Gear
BIGSHOT Maxim is a high quality organically grown botanical mosquito and agricultural pest control solution that works. BIGSHOT Maxim doesn’t cause harm to humans, animals, beneficial insects, such as bees & butterflies, and the environment by leaching into soils and ground water.
Since 1979, S.I. Distributing has been providing successful innovations in agriculture to improve farming overall as well as your bottom line. S.I. Distributing has teamed with NewFields Ag and Low Mu Tech, to offer biological innovations, utilizing nature as a key to profitable and sustainable farming.
PPS No-Ream Complete Flange Bushing Parallel Arms Kits - White 9000 Series - Box Planter
PPS Premium Complete Parallel Arm Rebuild Kits for White 9000 series, Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 9000 series planters - Box Planter
Broadcast Sprayer Ceramic Nozzles
Flat Fan, Twin Fan, Turbo & Deflector Nozzles.
Consider Bullseye Seed Tubes as they: Reduce seed tube bounce; Reduce excessive wear; Feature a long life with the tungsten-carbide tip; and Feature a smooth path to the trench Seed Tube Bounce or Ricochet Can Ruin the Best Meter Singulation.
Radura Rotary Disc Mower Blades for Bush Hog
The Bushel Plus SmartPan System has revolutionized the checking- for-harvest-loss process. You can now quantify your grain loss and calibrate your loss monitor for immediate improvement! Savings from farmers have been reported anywhere from 2% to more than 10%. The Bushel Plus SmartPan System is PROVEN for corn, soybeans, and small grain such as wheat, oats, barley, canola and rice.
The Bushel Plus SmartPan System has revolutionized the checking- for-harvest-loss process. You can now quantify your grain loss and calibrate your loss monitor for immediate improvement! Savings from farmers have been reported anywhere from 2% to more than 10%. The Bushel Plus SmartPan System is PROVEN for corn, soybeans, and small grain such as wheat, oats, barley, canola and rice.
The Bushel Plus SmartPan System has revolutionized the checking- for-harvest-loss process. You can now quantify your grain loss and calibrate your loss monitor for immediate improvement! Savings from farmers have been reported anywhere from 2% to more than 10%. The Bushel Plus SmartPan System is PROVEN for corn, soybeans, and small grain such as wheat, oats, barley, canola and rice.
G4 Stalk Stomper kits available for Capello Diamant and Capello Quasar
G4 Stalk Stompers available for Capello Diamant cornheads
G4 Stalk Stompers available for Capello Quasar cornheads
Caps for MagnoJet nozzles and other nozzles......
SCH EasyCut Cutter Bar Conversion Kits for Case-IH
S.I. Belt Meter Kits - Case-IH Drills
SCH EasyCut Cutter Bar Conversion Kits for Case-IH
Case -IH 7010, 7120; New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060
Will also fix CX720, 740, 760, 780, 8030, 8040, 8050 - Manual Adjust.
Case -IH 7010, 7120; New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060
Will also fix CX720, 740, 760, 780, 8030, 8040, 8050 - Electric (In Cab) Adjust.
TRAIL-JET FERTILIZER OPENER - CASE-IH
Stalk Stompers for Tractors Kits, for Case-IH models, Include mounting brackets, lift arm assemblies, shoe configuration and a hydraulic hose kit.
G4 Stalk Stomper kits available for Case-IH 800, 900/1000, 2200, 2400, 2600, 2606, 3200, 3400, 4200, 4400 series cornheads.
Please call for complete Reel replacement options for other combines and swathers not listed.
Unloading auger tubes for Case-IH combines
Unloading augers for Case-IH
Unloading Auger Extension Kits for Case-IH
Cornhead Augers for Case-IH cornheads
May Wes Poly Auger Trough Liners for Grain Tanks
• Guards against corrosion
• Provides a smooth, slick surface for the grain to flow out of the grain tank.
• Full coverage of the trough underneath the auger keeps grain in the tank for maximum harvest potential.
High Speed Compact Disc Blades for Case-IH
Martin-Till's Weight Transfer System for Case-IH
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Case-IH 800, 900, 955, 1200, 5400SS, 5500SS; 1200 Series with DeltaForce
May Wes UHMW Poly Snout Savers for Case-IH
May Wes UHMW poly Ear Savers for Case-IH
Thrash Master Concave Systems for Case-IH
Models Available for Case IH: Case IH Flag Ship - 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010
PPS PREMIUM COMPLETE FLANGE BUSHING KITS WITH PARALLEL ARMS FOR CASE-IH
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms - Best Option for Optimal Planter Repair
Case-IH 800, 900, 955, 1200, 5400SS, 5500SS
CASE-IH SQUARE BALER 8555: RASSPE SINGLE KNOTTER, RS 6003, W/O CAM GEAR
CASE-IH SQUARE BALER 8570: RASSPE SINGLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8575: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8576: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8580: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8585: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8590: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
Disc Openers - Case-IH - Drills and Air Seeders
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Case-IH 800, 900, 950, 955, 1200, 5400SS, 5500SS
Vertical Unloading Auger for Case-IH
Radura Rotary Disc Mower Blades for Case-IH
Disc Openers for Case-IH
WearParts Vertical Tillage blades for Case-IH
Rebounder Seed Deflectors for Case IH Drills
Rebounder Seed Deflectors for Case IH Drills
Rebounder Seed Deflectors for Case-IH Planters
Rebounder Seed Deflectors - Case-IH Planters
Hydra-Maxx Down Pressure System, for Case-IH Air Seeders, equally distributes the weight across the entire air seeder.
Available for Case-IH 500T and 500DS air seeders
Bushel Plus MAD Concaves for Case-IH
Available for the following models: 1680, 1688, 2188, 2388, 2588, 7088, 7130, & 7140; 2004 & Newer Flagship
OEM replacement guards available for Case-IH 820, 1010, 1020, 2010, 2020, 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162, 3020, 3152, 3162
Case-IH model years 1994 and prior. Case-IH 1010 headers (below S/N JJC0200000) and 1020 headers (below JJC0215000).
Case-IH model years 1995-1997. Case-IH 1010 headers (between S/N JJC0200001 - JJC0300000) and 1020 headers (between S/N JJC0215001 - JJC0315000).
Case-IH model years 1998 and newer. Case-IH 1010 headers (S/N JJC0300001 - and CBJ023001 -) and Case-IH 1020 headers (S/N JJC0315001 - and CBJ023003 -).
Radura OEM Replacement Sectional Knife Assemblies for Case-IH 1010 & 1020. Available for 17.5', 20', 22.5', 25' and 30'.
Case-IH 1010, 1020 reconditioned OEM runner. Available for greaseable and oil bath wobble box.
Case-IH 1010, 1020 Series Headers
SCH Pro-Drive Kits for Case-IH 1020 Flex Headers and Case-IH 1010 Rigid Header
Case-IH 1010, 1020, 2010, 2020
Case-IH 1010/1020/2142/2152/2162 - 8-7/8" Long
Poly Skid Shoes available for 15', 16.5', 17.5', 20', 22.5', 25' and 30'.
Case-IH 1020 Series Grain Head
Case-IH 1020 Grain Head Auger Trough Liner available for 15', 17.5', 20', 22.5', 25' and 30' platforms
Case-IH 1440, 1460, 1640, 1660 (prior to S/N JJC0039550) - Side Hill Option
Case-IH 1680 S/N JJC0047412 & up, 1688, 2188, 2377, 2388, 5877, 2588-Manual Adjust & Electric Adjust
Orbit Trac II kit available for Case-IH 2010 and 2020.
Case-IH 2020 - S/N Before CBJ020001.Including all HAJ
Poly Skid Shoes available for 20', 25' and 30'.
Case-IH 2020 - S/N Before CBJ020001.Including all HAJ Replacement Parts
Case-IH 2020 - S/N CBJ020001 - CBJ020700
Poly Skid Shoes available for 25', 30' and 35'.
Case-IH 2020 - S/N CBJ020001 - CBJ020700 Replacement Parts
Case-IH 2020 - S/N CBJ020701 - CBJ021300
Poly Skid Shoes available for 20', 25' and 30'.
Case-IH 2020 - S/N CBJ020701 - CBJ021300 Replacement Parts
Case-IH 2020 - S/N CBJ021301 & Later, Y9ZL & YAZL
Poly Skid Shoes available for 20', 25', 30' and 35'.
Case-IH 2020 - S/N CBJ021301 & Later, Y9ZL & YAZL Replacement Parts
Case-IH 2020 Series Grain Head
Case-IH 2020 Grain Head Auger Trough Liner available for 20', 25', 30' and 35' platforms
CASE-IH 2042, 2052, 2062 Series
CASE-IH 2042, 2052, 2062 Series - Roller Guide Kit
Case-IH 2042/2052/2062 - 7-7/16" Long
Case-IH 2052 - After Serial #CCC0014710
Poly Skid Shoes available for 21', 25' 30', 36' and 39'.
Case-IH 2052 - Before Serial #CCC0014710
Poly Skid Shoes available for 21', 25', 30', 36' and 39'.
Case-IH 2062 - After Serial #CCC0015328
Poly Skid Shoes available for 30', 36' and 39'.
Case-IH 2062 - Before Serial #CCC0015328
Poly Skid Shoes available for 30' and 36'.
CASE-IH 2142, 2152 Series - Roller Guide Kit
Radura OEM Replacement Sectional Knife Assemblies for Case-IH 2142, 2152 and 2162 with a 3" Knife Sections. Available for 15', 20', 25', 30', 35', 40' and 45'. Also available in coarse or fine sections.
CASE-IH 2162 Series - Roller Guide Kit
Poly Skid Shoes available for 30', 35', 40' and 45'.
Case-IH 2162/2152/2142 Replacement Parts
Case-IH 2200, 2400, 3200, 3400 Series Corn Head
Available for 4, 6, 8,12 and 16 row cornheads
Case-IH 2600, 4200, 4400 Series Corn Head
Available for 6, 8, 12 and 16 row cornheads
Case-IH 3016/3020/3152/3162 - 10-1/4" Long
Poly Skid Shoes available for 20', 25', 30' and 35'.
Orbit Trac II kit available for Case-IH 3020.
Case-IH 3020 Replacement Parts
Case-IH 3020, 3025, 3030, 3035
Case-IH 3152, 3162, 4152, 4162
Poly Skid Shoes available for 25', 30', 35', 40' and 45'.
Case-IH 3162/3152 Replacement Parts
CASE-IH 4000 Series - Roller Guide Kit
Case-IH 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45
Case-IH 5088, 6088, 7088, 5130, 6130, 7130 - Electric Adjust (In Cab)
Available for 4, 6, 8 and 12 row cornheads
Case-IH 900, 1000 Series Corn Head
Available for 4, 6, 8 and 12 row cornheads
Martin-Till’s Case-IH closing wheels replace the solid closing discs on Case-IH planters. Benefits include: Closing wheel arm pressure can be greatly reduced; Seeding depth does not have to be raised to ensure emergence
Cast Closing Wheel
- Made of rugged, thick, cast iron
- Weight 45 pounds per row
Please select if you are currently running the Case-IH cutter bar.
Case-IH DH213, DH253, DH303, DH363, DH403
Available for Case-IH Magnum 235, 260, 290, 315, 340 and 370.
Stalk Stompers for Tractors, Case-IH Magnum
Case-IH Quadtrac (2011 & Older)
Stalk Stompers for Tractors, Case-IH Quadtrac (2011 & Older)
Case-IH Quadtrac (2012 & Newer)
Stalk Stompers for Tractors, Case IH Quadtrac (2012 & Newer)
Case-IH Quadtrac 370, 420, 470, w/o Cast Bumper (2012 and Later)
Case-IH Quadtrac 450, 500, 540, 550, 580, 600, 620 (2012 and Later)
Case-IH Steiger (2011 & Older)
Stalk Stompers for Tractors, Case IH Steiger (2011 & Older)
Case-IH Steiger (2012 & Newer)
Stalk Stompers for Tractors, Case IH Steiger (2011 & Older)
Case-IH Steiger 350, 370, 400, 420, 450, 470 (2012 and Newer)
Kits available with cast bumper and without cast bumper
Case-IH Steiger 500, 540, 550, 580, 600, 620 (2012 and Later)
Case-IH Steiger/Quadtrac 485, 535 (2011 and Earlier)
Cast Closing Wheel
- Made of rugged, thick, cast iron
- Weight 45 pounds per row
SCH EasyCut Cutter Bar Conversion Kits for Caterpillar
May Wes UHMW poly Ear Savers for Caterpillar / Lexion
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits; John Deere ExactEmerge; CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge Plus; CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge XP/CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 5; CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge Plus; CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge XP; CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge 5; CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
ExactEmerge; CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
MaxEmerge 5; CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
John Deere MaxEmerge XP
CCS/Mini-Hopper
CHALLENGER 1842: RASSPE SINGLE KNOTTER, RS 6003, W/O CAM GEAR
CHALLENGER 2240: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2250: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2260: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2270XD: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2290: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER SB44: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
Unloading Auger Tubes for Challenger combines
Radura Disc Mower Blades, Challenger
Stalk Stompers for Tractors Kits, for Challenger models, includes mounting brackets, lift arm assemblies, shoe configuration and hydraulic hose kit.
Stalk Stompers for Tractors, Challenger 700 Series
Will fit Challenger 700, 700B, 700C and 700D.
Stalk Stompers for Tractors, Challenger 700B Series
Stalk Stompers for Tractors, Challenger 700C Series
Stalk Stompers for Tractors, Challenger 700D Series
Stalk Stompers for Tractors, Challenger 800 Series
CIH 1010 Series - Roller Guide Kit
CIH 1020 Series - Roller Guide Kit
CIH 3020 Series - Roller Guide Kit
CIH 820 Series - Roller Guide Kit
Radura Rotary Disc Mower Blades for Claas
Claas Balers and Self-Propelled
Duck Foot paddle tines available for 2017 and Newer Claas Convio
Claas G525, G530, F525, F530, F750, F900, S450-900
BAC - Botanical Antimicrobial Cleaner
Closing Wheel Bracket Rebuild Kit
Cast Closing Wheel Bracket Repair Kit & Spring Hole Repair Bushing
John Deere, spring hole repair bushing; 11/16” repair
John Deere, cast closing wheel bracket; 1-11/16” repair kit
Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
Manufactured by S.I. Distributing, for accurate closing wheel angle for optimum closing.
Closing Wheel Brackets - Case-IH Planters
V-Closing Wheel Bracket Upgrade Kit - Bracket kit, to convert planter to v-closing wheels. Includes shim washers for spacing wheels to desired width.
Closing Wheel Brackets - John Deere & Kinze Planters
Manufactured by S.I. Distributing, for accurate closing wheel angle for optimum closing.
Closing Wheel Bracket Kits and Brackets for John Deere and Kinze Planters.
Closing Wheel Brackets - White Planters
Bracket kit, to convert planter to v-closing wheels. Includes shim washers for spacing wheels to desired width. Will only fit planters if H-bracket arm is straight and down pressure springs are on the inside.
Closing wheels include Finger-Till closing wheels, Martin-Till closing wheels, cast closing wheels and rubber closing wheels. Closing wheels are the last part of the planter that can affect the crop at planting. The wrong setup can negate all the proper placement and depth you have achieved. Closing wheels securely close the furrow and eliminate air pockets.
Drill Closing Wheels: 13" Spiked Spading Wheels and 20-Point Dimple Wheels for John Deere
Martin-Till closing wheels, for drills, move soil toward the seed at planting depth, while lifting and fracturing the surface layer to achieve compaction-free closing of the seed trench in wet, hard or sod conditions. With soil firmed around the seed from each side and the surface layer loosened, crops emerge sooner and planting can be done at the proper depth, even in wetter conditions, without fear of crushed soil above the seed prevention emergence.
Martin closing wheels, for planters, move soil toward the seed at planting depth, while lifting and fracturing the surface layer to achieve compaction-free closing of the seed trench in wet, hard or sod conditions. With soil firmed around the seed from each side and the surface layer loosened, crops emerge sooner and planting can be done at the proper depth, even in wetter conditions, without fear of crushed soil above the seed prevention emergence.
CM135, CM165, CM167, CM168, CM170, CM210, CM211, CM212, CM220
Dome Blade
CM215, 135, 164, 166, 167, 168, 170, 184, 210
Flat Blade
Combine Draper Platform - Roller Guide Kit
Combine Draper Platform - Roller Guide Kit
Combine Draper Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Rigid Platform - Roller Guide Kit
The Combine Toolbox for your in-field quick fix, and maintenance needs. Mounts to the side of the combine for easy access.
The Combine Toolbox for your in-field quick fix, and maintenance needs. Mounts to the side of the combine for easy access.
Compact Clean Ride (ACCR) Floating Row Cleaner
Compact Clean Ride (ACCR) Floating Row Cleaner
Improves planter performance with innovative cast parallel linkage design.
Complete Parallel Arm Kits - No Ream
These rebuild kits come with flange-bushing -installed parallel arms and shoulder-less bolts.
They are ideal for narrow row planters and econo-fold planters where clearance around support plates is exceptionally tight.
No reamers are needed for these kits.
Concaves available for Case-IH, John Deere and New Holland combines.
Thrash Master Concave System
MAD Concaves™
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
Will fit hoses up to 5/8" in diameter.
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
The Copperhead Furrow Cruiser® finally solved the SIDEWALL COMPACTION problem that came with the development of the double disk opening system on modern planters.
Cornhead Augers available for Case-IH and John Deere cornheads
Crownfx™ is for use on Small Grains and promotes root development, enhances root mass, and enlarges root area as well as increases seed head length, kernel counts and crude protein.
Crownfx™ is for use on Small Grains and promotes root development, enhances root mass, and enlarges root area as well as increases seed head length, kernel counts and crude protein.
Rebounder Seed Deflectors for CrustBuster Drills
Rebounder Seed Deflectors for CrustBuster Drills
Disc Openers - Crustbuster - Drills and Air Seeders
May Wes UHMW Poly Snout Savers for John Deere C-Series
Consider the Martin-Till Dual 13-inch Cupped Dimple Closing Wheel Set for medium moisture to dry conditions, and hard conditions. The 20 rounded points crumble sidewalls. It works well on high-speed planters, drills and seeders.
Consider the Martin-Till Dual 13-inch Cupped Dimple Closing Wheel Set for medium moisture to dry conditions, and hard conditions. The 20 rounded points crumble sidewalls. It works well on high-speed planters, drills and seeders.
The Martin-Till Cupped Razor Closing Wheel works well in cover crops. 14 beveled razor style teeth crumble sidewalls, while cupped design squeezes trench closed.; 1/4” thick, heat-treated T-1 wheels, with 18 beveled razor teeth; Razor teeth break side while cupped design squeezes soil towards seed ensuring good seed to soil contact
• Works Well in Cover Crops • Prevents Wrapping • Shallow Planting Depths
The Martin-Till Cupped Razor Closing Wheel works well in cover crops. 14 beveled razor style teeth crumble sidewalls, while cupped design squeezes trench closed.; 1/4” thick, heat-treated T-1 wheels, with 18 beveled razor teeth; Razor teeth break side while cupped design squeezes soil towards seed ensuring good seed to soil contact
M3 Monitor Custom Harness: We can supply you with a harness with any connections that are currently utilized in the planter/drill market. We can make a custom harness for a planter, splitter or drill. Please talk to our knowledgable staff to request a quote.
Cylinder kit available for John Deere 50, 60/90 and Pro-Series drills. One required per row. Hydraulic valve kit sold separately.
OEM Replacement Sections available for D125, D130, D135, D140, D145
7 Degree Blade
14 Degree Blade
7 Degree Blade
14 Degree Blade
11 Degree Blades
DC515, 725, 8309, 8312, 8315, 8850
18 Degree Top Bevel Blade
DC515, 725, 8850, 8309, 8312, 8315
11 Degree Blade
14 Degree Blade
7 Degree Blade
DC93, DC103, DC133, DC163, RD163, RD193
7 Degree Blade
DC93, DC103, DC133, DC163, RD163, RD193
14 Degree Blade
DC93, DC103, DC133, DC163, RD163, RD193
18 Degree Blade
MagnoJet Deflector Flood Nozzles. Regular or Air Induction
High Speed Compact Disc Blades for Degelman
Depth Wheel, Reduced Inner Diameter
Reduced inner diameter tires allow seed trench to lift part of the sidewall and fracture. To reduce sidewall compaction to a minimum, JD style planters will need the gauge wheel tires changed to reduced inner diameter style to allow the seed trench walls to lift slightly.
The Depth-A-Matic allows the depth gauge wheels to follow the ground terrain allowing the unit to travel smoothly in all field conditions.
Radura Rotary Disc Mower Blades for Deutz-Fahr
Consider Martin-Till Dimple Closing Wheel Sets for medium moisture to dry conditions, and hard conditions. The 20 rounded points crumble sidewalls. They are less aggressive than spike closing wheels. Works well on high speed planters, drills and seeders.
Consider Martin-Till Dimple Closing Wheel Sets for medium moisture to dry conditions, and hard conditions. The 20 rounded points crumble sidewalls. They are less aggressive than spike closing wheels. Works well on high speed planters, drills and seeders.
Wearparts seed disc openers, with Forges De Niaux blades and PEER bearings, feature improved life with sharp cutting-edge retention due to high hardness. Available for Case-IH, Great Plains, Kinze, John Deere and White
Wearparts Seed Disc Openers have a 30% longer wear on average than competing blades. Created with high-grade, quality boron steel, this opener fits nearly all brands of planter and drill applications and is protected with a lifetime warranty on breakage.
Discontinued Easy Cut I Guards
Discontinued Easy Cut I Guards
Mur-lok Divider
DM1140, DM1150, DM1160, DM1270
10 Degree Blade
DM7, DM8, DM9, DM18, DM19, HM5, HM7, HM8
11 Degree Blade
DM70, DM80, DM90, DM180, DM190, DM5406, DM5407, DM5408, DM5409
11 Degree Blade
DM70, DM80, DM90, DM180, DM190, DM5406, DM5407, DM5408, DM5409
18 Degree Blade
This Down Pressure Spring Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range.
G4 Stalk Stomper kits available for Drago I, II and GT series
May Wes UHMW Poly Snout Savers for Drago
G4 Stalk Stompers available for Drago GT series
G4 Stalk Stompers available for Drago GT series
Rebounder seed deflectors, for drills, funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Rebounder seed deflectors, for drills / seeders, funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Consider the Martin-Till 13" Spike (Spading) Closing Wheel Set for compaction-free closing of the seed trench in wet or harsh conditions. It moves soil toward the seed at planting depth while lifting and fracturing the surface layer. The 3/8” thick, 13” diameter right and left toothed steel wheels feature 14 teeth and diamond shaped points.
Consider the Martin-Till 13" Spike (Spading) Closing Wheel Set for compaction-free closing of the seed trench in wet or harsh conditions. It moves soil toward the seed at planting depth while lifting and fracturing the surface layer. The 3/8” thick, 13” diameter right and left toothed steel wheels feature 14 teeth and diamond shaped points.
DUST Seed Lubricant improves seed flow! Choose soy-protein DUST as a healthier, safer and cleaner seed and mechancial lubricant and as a replacement to graphite and talc. This patented lubricant is the perfect seed box treatment for your current planter or drill technology to use with ANY SEED.
DUST + B4 is recommended for dry planter box applications looking to increase nutrient uptake while initially providing seed lubricity. DUST + B4 increases the availability of phosphorous, zinc and iron that are in your soil and make it available to your crop.
Terrasym® 401 + DUST™ for soybeans and Terrasym® 450 + DUST™ for corn are designed to improve seed lubrication and seed flow during planting and deliver improved nutrient uptake leading to robust early season root development, enhanced tolerance of abiotic stress throughout the growing season, and higher yields at harvest.
Dust + Terraysm 450 + TS201 is an EPA-Registered Biopesticide provides increased plant health and root growth under varying insect pressure.
DUST Seed Lubricant and DUST + Terrasym
Soy-protein DUST is a healthier, safer and cleaner seed and mechancal lubricant and as a replacement to graphite and talc. Terrasym® 401 + DUST™for soybeans and Terrasym® 450 + DUST™for corn are designed to deliver improved nutrient uptake leading to robust early season root development, enhanced tolerance of abiotic stress throughout the growing season, and higher yields at harvest.
UHMW poly Ear Savers prevent loose corn ears from sliding over the gathering chains to the ground. May Wes Ear Savers will not fold back like factory ear gates. They stay rigid, working like a gate, yet soft enough to let corn go through without knocking the ears off the corn stalk.
Long guards are recommended for rigid grain platforms and hay machines.
Long guards are recommended for rigid grain platforms and hay machines.
Short guards are recommended for flex grain platforms.
Short guards are recommended for flex grain platforms.
e-Flow is a special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow also improves the flow of seed from the hopper to the meter. The eFlow dispenser lid is a measuring lid that fits the 8-lb eFlow jug.
Mur-lok - Elbow
Envita. Nitrogen Now. In Every Cell. This N-fixing bacteria works from within the plant all season long. Apply in furrow or foliar, and across crops to supplement nitrogen where and when it’s needed.
Envita. Nitrogen Now. In Every Cell. This N-fixing bacteria works from within the plant all season long. Apply in furrow or foliar, and across crops to supplement nitrogen where and when it’s needed.
eSet Pro-Series Options
eSet Service Parts
eSet replacement parts, including seed discs, singulators and extractors for specialty crops. These crops include canola, chili, cotton, cucumbers, gourds, peanuts, popcorn, pumpkins, snap beans, sorghum, squash, sugar beets, sunflowers and sweet corn.
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
ExactEmerge
Available for John Deere 17X5 and DB series CCS/mini hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
ExactEmerge
Available for John Deere 17X5 and DB series CCS/mini hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
ExactEmerge
John Deere 17X5 and DB series CCS/mini hopper
G4 Stalk Stompers available for Fantini cornheads
G4 Stalk Stompers available for Fantini cornheads
10 Degree Blades
FC2860, FC3160, FC3560, FC4060
11 Degree Blades
FC44, FC55, GMD33, GMD44, GMD55, GMD66, GMD77
10 Degree Blades
FC44, FC55, GMD33, GMD44, GMD55, GMD66, GMD77
11 Degree Blade
FC44, FC55, GMD33, GMD44, GMD55, GMD66, GMD77
Flat Blade
Martin-Till fCrusher Closing Wheel - Firms and Crumbles at the Same Time
• Tapered tooth design allows firming on one side and crumbling on the other.
• Lightweight (9.5 lbs.)
Martin-Till fCrusher Closing Wheel - Firms and Crumbles at the Same Time
• Tapered tooth design allows firming on one side and crumbling on the other.
OEM Replacement Sections available for FD125, FD130, FD135, FD140, FD145
Replacement Feederhouse Drums available for John Deere combines.
Radura Rotary Disc Mower Blades for Fella
FENDT 12130 SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1270N SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1270S SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1290N SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
FENDT 1290S SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
Fertilizer Openers - Single & Dual UMO 150
Consistently places fertilizer in the ground without splattering it on the planter!
IMPROVED design allows more ground clearance with a more narrow profile.
Mounted rigidly to the row units, Martin-Till® Unit-Mounted Fertilizer Openers (UMOs) follow the row unit over undulating terrain to place crop nutrients at seed depth either one, two or three inches from the seed furrow.
Fertilizer Openers - Single & Dual UMOs - & Brackets
Consistently places fertilizer in the ground without splattering it on the planter!
IMPROVED design allows more ground clearance with a more narrow profile.
Mounted rigidly to the row units, Martin-Till® Unit-Mounted Fertilizer Openers (UMOs) follow the row unit over undulating terrain to place crop nutrients at seed depth either one, two or three inches from the seed furrow.
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 2
Fiberglass Box
Field Tracker parts, specifically Corn Head Adapter Kits, are available for Case-IH combines.
Filters and Miscellaneous items ......
Finger-Till Cast Closing Wheels
S.I. Distributing's Finger-Till Closing Wheel crumble sidewalls and close the furrow for optimum seed-to-soil contact. The side fins provide depth control and fine-tune the soil. Better in wet no-till conditions.
More aggressive Reduces sidewall compaction Lightly tills the soil 15" in diameter
Finger-Till Cast Closing Wheels
S.I. Distributing's Finger-Till Closing Wheel crumble sidewalls and close the furrow for optimum seed-to-soil contact. The side fins provide depth control and fine-tune the soil.
• More aggressive • Better in wet, no-till conditions
Mur-lok Fitting
Available for 2004 and newer Flagship combines
MagnoJet Flat Fan Anti Drift Nozzles. 80 or 110 degree, Regular or Air Induction.
MagnoJet Flat Fan Low Drift Nozzles. 80 or 110 degree.
CrownFx
Envita
IonFx
PheNom
Soyfx
Envita
IonFx
PheNom
Soyfx
Radura Rotary Disc Mower Blades for Frontier
Rebounder Seed Deflectors for Flexi-Coil (FSO) Drills
Rebounder Seed Deflectors for Flexi-Coil (FSO) Drills
With May Wes G4 Stalk Stompers, knock down corn stalks ahead of combine and tractor tires preventing tire stubble damage. Today’s corn stubble is as tough as nails. Don’t let it damage your expensive combine tires and tracks.
The Gateway, HCC’s sieve and chaffer system, is significantly lighter than standard sieves and chaffers found on current combines. The patented design utilizes aluminum and plastic construction for lower frame weight.
Replacement Gauge Wheel Arms for John Deere and Kinze planters.
Gauge Wheel Assemblies for Drills
Gauge Wheel Assemblies available for John Deere planters, John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
Gauge Wheel Tires for Case-IH planters, Case-IH air drills, John Deere planters, John Deere drills, Kinze planters, New Holland planters and White planters.
Gauge Wheel Tires for Case-IH planters, Case-IH air drills, John Deere planters, John Deere drills, Kinze planters, New Holland planters and White planters.
Gauge wheel assemblies and tires available for John Deere drills and Case-IH air drills.
Gauge wheel arms, assemblies and tires available for John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
Radura Rotary Disc Mower Blades for Gehl
G4 Stalk Stomper kits available for Geringhoff Horizon, Northstar and Rota Disc series cornheads.
G4 Stalk Stompers available for Geringhoff Horizon series
Geringhoff Northstar, Patriot & Rota Disc Series
G4 Stalk Stompers available for Geringhoff Northstar, Patriot & Rota Disc series
Geringhoff TruFlex, TruFlex Razor
Duck Foot paddle tines available for 2020 and Newer Geringhoff TruFlex and TruFlex Razor
Unloading Auger Tubes for Gleaner Combines
Unloading Augers for Gleaner
Unloading Auger Extension Kits for Gleaner
Gleaner - R62 (SN 66001 & Up), R72 (SN 76001 & Up), R65, R66, R75, R76 - Manual Adjust
10 Degree Blades
10 Degree Blade
Flat Blade
GPS/OEM System Camera Adapter Kits
These GPS/OEM System Camera Kits include a camera, cable, and adapter which allows you to easily plug into your existing screen / guidance system. Options available for most camera-capable GPS Systems. Use what you have for less clutter in the cab.
Grain Tank Auger Floor Liner - Protect the area in your grain tank that needs it the most and wears out the quickest.
Grain Tank Bottom Unloading Auger
Grain Tank Bottom Unloading Auger for Case-IH and John Deere.
Grease Gun Holder and Spray Can Holder
The Grease Gun Holder and the Spray Can Holder conveniently store your grease gun or spray can in an easy access place with these holders.
S.I. Belt Meter Kits for Great Plains Drills
WearParts Vertical Tillage blades for Great Plains
Disc Openers for Great Plains
Disc Openers - Great Plains - Drills and Air Seeders
Rebounder Seed Deflectors for Great Plains Drills
Rebounder Seed Deflectors for Great Plains Planters
Rebounder Seed Deflectors - Great Plains Planters
Rebounder Seed Deflectors for Great Plains Drills
Growthful™ is the innovative liquid H+ soil amendment that helps you grow more, faster and can easily be added to your current cultivation application methods, whether it’s infurrow, drip-line, center pivot, broadcast, or aerial.
May Wes UHMW poly Ear Savers for GVL
Martin-Till's Weight Transfer System for Harvest International
WA1345 row cleaner for Harvest International Laser Pro
Disc Openers for Harvest International
Harvest Products, Miscellaneous
Plastic Wear Blocks, ect.
G4 Stalk Stomper kits available for Harvestec 5000 and 6000 series cornheads.
G4 Stalk Stompers available for Harvestec 5000, 6000 series cornheads
The HCC Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in soybeans, canola and other tall, stringy crops for a more efficient harvest.. Improve your harvest with the Flip Combine Reel Kit from HCC, which features a tine flipping action that enhances reel performance and ensures continuous crop flow, especially for tough crops.
SCH hedge trimmers offer straight, smooth and precision cuts which encourage a healthy re-growth. Applications include: orchard vegetation management, specialty crop harvesting, hedge/shrub cutters, roadside management
Radura Rotary Disc Mower Blades for Hesston
HESSTON 4655 SQUARE BALER: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
HESSTON 4690S SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4750S SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4755 SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4760 SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4790 SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4900 SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4910 SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
HESSTON 4960 SQUARE BALER: RASSPE SINGLE KNOTTER, RS 6003, W/ AND W/O CAM GEAR
SCH EasyCut Cutter Bar Conversion Kits for Hesston
Hesston 1085, 1090, 1091, 1095
High Speed Compact Disc Blades
High Speed Compact Disc Blades' specially formulated boron steel outwears leading competitors. They are available for Case-IH, Degelman, Horsch, John Deere, Kinze, K-Line, Landoll and Norwood.
May Wes Horizontal Poly Cutting Edges (also known as Poly Blades), for buckets and skid loaders. They are beveled on both sides. They also have optional counterbored holes.
High Speed Compact Disc Blades for Horsch
Rebounder Seed Deflectors - Horsh Planters
Rebounder Seed Deflectors for Horsch Planters
HTD7, HTD7B, HTD8, HTD8B, HTD9, HTD9B
11 Degree Blade
HTD7, HTD7B, HTD8, HTD8B, HTD9, HTD9B
18 Degree Blade
Hydra-Maxx Down Pressure System
The Hydra-Maxx Down Pressure System Equally Distributes Weight Across the Entire Air Seeder. No more need for Suitcase Weights on the wings, which means less stress on the frame bolts! Hydra-Maxx Down Pressure System for Case-IH and John Deere Air Seeders.
Hydraulic valve kit required when running Uniforce.
I, Super I, J, Super J, K, L, XL, Super M, N, Rancher, Rebel
Big Shot Maxim
IONfx™ a mulit-crop Biostimulant, for corn, silage corn, cotton, canola, small grains, and flax. It is a mix of genetically identified and patented bacteria, along with archaea and fungi.
IONfx™ a mulit-crop Biostimulant, for corn, silage corn, cotton, canola, small grains, and flax. It is a mix of genetically identified and patented bacteria, along with archaea and fungi.
IONfx™ a mulit-crop Biostimulant, for corn, silage corn, cotton, canola, small grains, and flax. It is a mix of genetically identified and patented bacteria, along with archaea and fungi.
Jaguar, Quadrant, Quantum, Rollant, Variant
JD 1207, 1209, 1219 with bearing knifehead
JD 1207, 1209, 1219 with bushing knifehead
JD 1600 with bearing knifehead
JD 200 & 900 Series - Roller Guide Kit
JD 250, 350, 450 with bearing knifehead
JD 250, 350, 450 with bushing knifehead
May Wes Poly Auger Trough Liners for Grain Tanks
• Guards against corrosion
• Provides a smooth, slick surface for the grain to flow out of the grain tank.
• Full coverage of the trough underneath the auger keeps grain in the tank for maximum harvest potential.
Cornhead Augers for John Deere cornheads
Unloading Auger Extension Kits for John Deere
Unloading Augers for John Deere
Unloading auger tubes for John Deere Combines
Exapta Valion Seed Tube Guards for John Deere
G4 Stalk Stomper kits available for John Deere 600/700, C-series and 90/40 series cornheads.
Stalk Stompers for Tractors Kits, for John Deere models, includes mounting brackets, lift arm assemblies, shoe configuration and hydraulic hose kit.
Please call for complete Reel replacement options for other combines and swathers not listed.
S.I. Belt Meter Kits for John Deere Drills
SCH EasyCut Cutter Bar Conversion Kits for John Deere
TRAIL-JET FERTILIZER OPENER - JOHN DEERE
Radura OEM Replacement Sectional Knife Assemblies for John Deere 200, 900, 600F, 900D, 600FD, 700FD.
Radura Disc Mower Blades for John Deere
Vertical Unloading Auger for John Deere
Disc Openers for John Deere
Keeton Seed Firmers for John Deere Planters - Choice of Quick Attach or Universal Bracket
The Celsan blade is highly durable and made of high manganese steel that averages 15-20% longer life over standard blades. WearParts’ Celsan blade is single heat-treated and will fit the following John Deere drills: John Deere 750, 1560, 1565, 1590, 1690, 1835, 1850, 1860, 1890, 1895 and 1990 drills. OEM Part Numbers: John Deere: N283804, N214190
Replacement Gauge Wheel Arms and Bushings for John Deere planters.
Hydra-Maxx Down Pressure System, for John Deere Air Seeders, equally distributes the weight across the entire air seeder.
Available for John Deere 1690, 1860, 1890, 1890, 1895, 1990 air seeders
Rebounder Seed Deflectors for John Deere Planters
Rebounder Seed Deflectors for John Deere Drills
Rebounder Seed Deflectors - John Deere Planters
Rebounder Seed Deflectors for John Deere Drills
WA1345 row cleaner for John Deere 7000, 7100, 7200, 7300, 1700, DB series
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for John Deere MaxEmerge, MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro, XP, XP Pro, MaxEmerge 5 and ExactEmerge Planters
PPS PREMIUM COMPLETE FLANGE BUSHING KITS WITH PARALLEL ARMS - JOHN DEERE
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms
John Deere MaxEmerge, MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro, XP, XP Pro, MaxEmerge 5 and ExactEmerge planters
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for John Deere MaxEmerge, MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro, XP, XP Pro, MaxEmerge 5 and ExactEmerge Planters
May Wes UHMW Poly Snout Savers for John Deere
Thrash Master Concave System for John Deere
Models Available for John Deere - 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690
High Speed Compact Disc Blades for John Deere
Martin-Till's Weight Transfer System for John Deere
May Wes UHMW poly Ear Savers for John Deere
Bushel Plus MAD Concaves for John Deere
Available for these John Deere Models: STS 9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870; S650, S660, S670, S680, S690, S760, S770, S780, S790; X9
OEM replacement guards available for John Deere 200, 900, 600F, 600FD, 700FD, 600D, 600R, 900D
John Deere - 9600, 9610, 9650, 9660
John Deere - S660, S670, S680, S690 - Electric Adjust
John Deere 200 - 900 Series Headers
SCH Pro-Drive Kits for John Deere 200, 900 Series Flex Headers and John Deere 200, 900 Series Rigid Headers
John Deere 200, 900 Flex Platform
John Deere 200, 900 Series Grain Head
John Deere 200, 900 series Grain Head Auger Trough Liner available for 13'-16', 18'-20', 22'-24', 25' and 30' platforms
John Deere 200/900 Series - 10-1/4" Long
Poly Skid Shoes available for 13', 15', 16', 18', 20', 22, 24' and 25'. 1/2" Mega and 1/4" Thick
John Deere 40/50/90 Series Corn Head
Available for 4, 6, 8 and 12 row cornheads
Radura OEM Replacement Sectional Knife Assemblies for John Deere 600 Flex Series with a 4" Knife Sections. Available for 20', 25', 30' and 35'. Available in coarse or fine sections.
John Deere 600 Series Corn Head
Avaliable for 6, 8 and 12 row cornheads
G4 Stalk Stompers available for John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
John Deere 600F Replacement Parts
Poly Skid Shoes available 18', 20', 22', 25', 30' and 35'. 3/8" and 1/4" Thick
John Deere 600F Series Grain Head
John Deere 600F series Grain Head Auger Trough Liner available for 20', 22', 25', 30' and 35' platforms
John Deere 600F/600R Series - 11-1/4" Long
John Deere 600FD (after s/n 785,000), 700FD, HDR, HDF, RDF
John Deere 600FD Series - 2012
John Deere 600FD Series - 2013/2014
John Deere 600FD Series - 2015
John Deere 600FD, 600D, 700FD, 700D, RDF Series - 10-5/8" Long
John Deere 600FD, 700FD Series
Poly Skid Shoes available for 30', 35', 40' and 45'. 3/8" and 1/4" Thick
John Deere 600FD, 700FD Series
John Deere 600FD, 700FD, RDF Series 2016 & Newer
John Deere 600FD, 700FD, RDF Series Replacement Parts
Valion seed tube guard available for John Deere MaxEmerge.
John Deere 7200, 7300, 1700 series
Valion seed tube guard available for John Deere MaxEmerge 2, Plus, Pro, XP, XP Pro and MaxEmerge 5.
John Deere 7200, 7300, 1700, DB Series
Stalk Stompers for Tractors, John Deere 8000 Series
Stalk Stompers for Tractors, John Deere 8010 Series
Stalk Stompers for Tractors, John Deere 8020 Series
Stalk Stompers for Tractors, John Deere 8030 Series
Stalk Stompers for Tractors, John Deere 8R Series
G4 Stalk Stompers available for John Deere 443, 493, 643, 693, 843, 893, 1243 and 1293.
John Deere 900 Draper Platform
Poly Skid Shoes available for 13', 15', 18', 20', 22', 24', 25' and 30'. 1/2" Mega and 1/4" Thick
John Deere 900F, 600F, 600FD (prior to s/n 785,000)
Does NOT include track models.
Does NOT include track models.
Stalk Stompers for Tractors, John Deere 9030 Series
Stalk Stompers for Tractors, John Deere 9R Series
Does NOT include track models.
Stalk Stompers for Tractors, John Deere 9RT Series
Stalk Stompers for Tractors, John Deere 9RX Series
G4 Stalk Stompers available for John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
Please select if you are currently running the John Deere Cutter Bar.
John Deere Drill Improvements - Ninja/Needham/Seed Boots
Needham Ag V8 Firming Wheels
Exapta’s Ninja Flexible Seed Bounce Flap
John Deere Seed Boots
John Deere Pneumatic Down Pressure Support Arm Repair Kit
John Deere Pneumatic Down Pressure Support Arm Repair Kit
John Deere SeedRight Seed Plates
Simple Retrofit for John Deere Vacuum Planters ---- Large Cell Disc: Recommended for wheat, oats, cereal rye and triticale. The large cell disc is for approximately 9k-35k seeds per pound. Small Cell Disc: Recommended for radish, turnip and crimson clover. The small cell disc is for approximately 35k-300k seeds per pound.
John Deere SeedRight Seed Plates
Simple Retrofit for John Deere Vacuum Planters --- Large Cell Disc: Recommended for wheat, oats, cereal rye and triticale. The large cell disc is for approximately 9k-35k seeds per pound. Small Cell Disc: Recommended for radish, turnip and crimson clover. The small cell disc is for approximately 35k-300k seeds per pound.
John Deere Self-Propelled Harvester
Keeton Seed Firmer Replacement Parts
Keeton Seed Firmer Replacement Parts including tails and brackets
Keeton Seed Firmer Replacement Parts
Keeton Seed Firmer Replacement Parts including tails, brackets, brackets and hardware, and splitter and inserts
Keeton Seed Firmer Replacement Parts
Keeton Seed Firmer Replacement Parts, namely tails and universal bracket
Keeton Seed Firmer Replacement Parts
Keeton Seed Firmer Replacement Parts including tails; and brackets and hardware
Keeton Seed Firmer Replacement Parts
Keeton Seed Firmer Replacement Parts including tails, brackets, brackets and hardware, and splitter and inserts
Keeton Seed Firmer parts including tails, brackets, tubing, hose clamps, zip ties, splitter and inserts.
Get the Money-Making Advantages of Keeton Seed Firmers for your Drill! Reduced seed costs. Improved germination means you get better stands with fewer seeds. On average, tests show a 9.4% increase in soybean germination.
Get the Money-Making Advantages of Keeton Seed Firmers for your drill.
Benefits: Reduced seed costs; improved germination means you get better stands with fewer seeds. On average, tests show a 9.4% increase in soybean germination.
Keeton Seed Firmers and Accessories
Keeton Seed Firmers gently press every seed into the bottom of the trench to place it firmly into the soil, to improve seed-to-soil contact. Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence, and tests show, an average increase of six bushels per acre.
Keeton Seed Firmers for John Deere, Kinze and White planters
TRAIL JET FERTILIZER OPENER - KINZE
Replacement Gauge Wheel Arms for Kinze planters.
WA1345 row cleaner for Kinze 2000, 3000 and 4900 series
WA1360 row cleaners available for Kinze 2000, 3000 and 4900 series
Air cylinder mounting brackets available for Kinze row cleaners
Rebounder Seed Deflectors - Kinze Planters
Rebounder Seed Deflectors for Kinze Planters
PPS PREMIUM COMPLETE FLANGE BUSHING KITS WITH PARALLEL ARMS - JOHN DEERE
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms
Kinze 2000 and 3000 series
Keeton Seed Firmers for Kinze - Choice of Kinze Brackets or Quick Attach
Exapta Valion Seed Tube Guards for Kinze
Disc Openers for Kinze
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 2000, 3000, 4900 series planters
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Kinze 2000 and 3000 series
High Speed Compact Disc Blades for Kinze
Valions for Kinze 2000 Series
Kinze 3000 Series
• Mounts inside row unit between scrapers.
• Has an adjustable tension screw.
• Available with dual liquid tube, dry tail or low profile tail
Simple Retrofit for Kinze Brush Meters ---- Backer Plate: Used to plant wheat, oats, cereal rye, annual rye, sorgham, sorghum sudan grass, triticale, radish, turnips, crimson clover and alfalfa. Large Cell Disc: For larger sized seeds, commonly less than 35,000 seeds per pound. Small Cell Disc: For smaller sized seeds, commonly greater than 35,000 seeds per pound.
Simple Retrofit for Kinze Brush Meters Backer Plate: Used to plant wheat, oats, cereal rye, annual rye, sorgham, sorghum sudan grass, triticale, radish, turnips, crimson clover and alfalfa. Large Cell Disc: For larger sized seeds, commonly less than 35,000 seeds per pound. Small Cell Disc: For smaller sized seeds, commonly greater than 35,000 seeds per pound.
High Speed Compact Disc Blades for K-Line
KM2.27, SM40, SM45, SM50, SM50F, SM55F
15 Degree Blade
Flat Angle Radura Mower Blade
KM20, KM22, KM24, KM25, KM25F, KM2.17, KM2.19, KM2.33, KM222, KM252
Flat Angle Radura Mower Blade
KM20, KM22, KM24, KM25, KM25F, KM2.17, KM2.19, KM2.33, KM222, KM252
Flat Angle Radura Mower Blade
KM20, KM22, KM24, KM25, KM25F, KM2.17, KM2.19, KM2.33, KM222, KM252
Flat Angle Radura Mower Blade
Hardware package for knifheads
Rebounder Seed Deflectors for Krause Drills
Rebounder Seed Deflectors for Krause Drills
WearParts Vertical Tillage blades for Krause
Radura Rotary Disc Mower Blades for Krone
Radura Rotary Disc Mower Blades for Kuhn
Rebounder Seed Deflectors for Landoll Drills
Rebounder Seed Deflectors for Landoll Drills
WearParts Vertical Tillage blades for Landoll
Disc Openers - Landoll - Drills and Air Seeders
High Speed Compact Disc Blades for Landoll
30" spacing on John Deere 1770/1775 bar
LB324, LB333, LB334, LB424, LB433, LB434, LBX322, LBX331, LBX332, LBX421, LBX422
Available for standard, packer and roto cutter head
Level II Replacement Reel Tines
Level II Reels have a 1.375” (35 mm) tube with 0.5” ( 12.7 mm) hex holes spaced 6.0” ( 152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube. Standard since 1999/2000.
SCH EasyCut Cutter Bar Conversion Kits for Lexicon
G4 Stalk Stompers available for Lexion cornheads
G4 Stalk Stompers available for Lexion cornheads
B4
Envita
IonFx
PheNom
Soyfx
Envita
IonFx
PheNom
Soyfx
Never look back!
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal.
Never look back! Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal.
Never look back! Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal.
Love Reels Replacement Tines
Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2.5” (64 mm) above the edge.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the drill harness.
M3 MONITOR KIT, 12-ROW PLANTER All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the drill harness.
M3 MONITOR KIT, 16-ROW PLANTER All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the drill harness.
M3 MONITOR KIT, 4-ROW PLANTER All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the drill harness.
M3 MONITOR KIT, 6-ROW PLANTER All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the drill harness.
M3 MONITOR KIT, 8-ROW PLANTER All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness.
M3 Monitor Accessories including sensors, sensor kits, adapter kits, cab cables and power cables.
M3 MONITOR ACCESSORIES including sensors, sensor kits, adapter kits, cab cables and power cables.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the drill harness.
The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. All kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness.
Population Monitor for Planters. The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. We can also supply you with a custom harness built specifically for your planter or drill.
Population Monitor for Planters and Grain Drills. The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. We can also supply you with a custom harness built specifically for your planter or drill.
SCH EasyCut Cutter Bar Conversion Kits for Mac Don
Radura OEM Replacement Sectional Knife Assemblies for MacDon with a 3" Knife Sections. Available for 20', 25', 30', 35', 40' and 45'. Also available in coarse or fine sections.
Radura Disc Mower Blades for MacDon R116 - 10 degree blade
G4 Stalk Stomper kits available for MacDon C-series cornheads
OEM replacement guards available for MacDon 960, 962, 963, 972, 973, 974, D40, D50, D60. D-1, FD70, FD75, FD-1
Poly Skid Shoes available for 25', 30' and 36'.
Poly Skid Shoes available for 21', 25', 30' and 36'.
MACDON 972, D60 Series - Roller Guide Kit
Poly Skid Shoes available for 21', 25', 30', 36' and 39'.
Poly Skid Shoes available for 21', 25', 30', 36' and 39'.
MACDON 973 Series - Roller Guide Kit
Poly Skid Shoes available for 21', 25', 30' and 36'.
Poly Skid Shoes available for 21', 25', 30' and 36'.
MACDON 974 Series - Roller Guide Kit
MacDon CA20/CA25 - 8-7/8" Long
Duck Foot Paddle Tines availabe for MacDon D50, D60, D65; FD70, FD75; FD130, FD135, FD140, FD145; FD230, FD235, FD240, FD245, FD250
MACDON FD-1 Series - Roller Guide Kit
Poly Skid Shoes available for MacDon D65, FD75, D125, D130, D135, D140, D145, FD130, FD135, FD140, FD145
MACDON FD70, FD75 Series - Roller Guide Kit
Poly Skid Shoes available for 30', 35', 40' and 45'.
MacDon FD70/D60/D50 Replacement Parts
MacDon FM100 Float Module - 9-1/8" long
Bushel Plus MAD Concaves - Case IH, John Deere and New Holland
• Reduce Dockage & Losses • Quick & Easy to Change
• Increase Grain Quality • Gain Operational Efficiency
A complete line of Ceramic spray nozzles at affordable prices.
Manual Control - Row Cleaner Control Systems
Precision Planting's CleanSweep Row-Cleaner Air Control System - is a dual air cylinder that lets you manually set and adjust your row cleaners’ down pressure from the cab.
Martin-Till Manual Bidirectional Air Control System - Adjust your row cleaners on-the-go from the cab.
NutriPhi
Air cylinder mounting brackets available for Martin row cleaners. Not required with Martin-Till ACCR row cleaners.
Martin C125 Floating Row Cleaners
The C-125 was replaced by the WA1360; however it is still available for certain planter configurations such as with aftermarket no-till coulters.
• Floats to follow ground contour
Mounting Brackets for the C125 Row Cleaners.
Martin Pin-Adjust Mounting Brackets
Mounting Brackets for the Pin-Adjust Row Cleaner. Must choose one bracket to mount the row cleaner.
Martin Pin-Adjust Row Cleaners
The Martin original style row cleaner clears the widest path of any tooth wheel row cleaner on the market.
The 15” diameter, 3/8” thick, T-1 heat-treated wheels are made left and right in order to shed the residue better.
Martin Replacement Parts, for Row Cleaners & Spader Wheels
Martin Row Cleaner Accessories
Accessories for Martin-Till Row Cleaners including, side treader wheels, cam adjusters, back brackets, cam adjusts and parallel arms.
-
Compact Design, just 15 1/2" from Row Unit Faceplate!
-
Uses HA44270D Heavy Duty greasable tapered roller bearing hub with 2 lip seal
MARTIN WA1345 Mounting Brackets
Mounting Brackets for the WA1345. Must choose one bracket to mount the floating row cleaner.
Martin WA1360 Floating Row Cleaners
• Only requires 19” of clearance from planter face plate, 22” when using with a no-till coulter and 25” when using with Martin UMO-150 fertilizer opener
• Choice of Spike wheels, can be installed in the intersected, offset, or retracted operating positions
Martin WA1360 Mounting Brackets
Mounting Brackets for the WA1360. Must choose one bracket to mount the floating row cleaner.
Martin-Till Floating Row Cleaners
COMPACT CLEAN RIDE (ACCR) FLOATING ROW CLEANER
WA1360 FLOATING ROW CLEANERS
WA1345 FLOATING ROW CLEANERS
PIN-ADJUST/RIGID ROW CLEANERS
Martin-Till Manual Bidirectional Control
The Martin-Till Manual Bidirectional Air Control System allows for pressurizing both sides of the cylinder at the same time. Providing additional PSI to the opposing end of the cylinder reduces bounce and allows for fine tuning. The kit includes the control box, a compressor (if required), the necessary air line kit and air cylinders.
Martin-Till Planting Attachments
Martin-Till planter attachments make it possible for you to plant into higher levels of residue and moisture. Martin-Till Planting Attachments include: Floating Row Cleaners, Fixed Row Cleaners, Fertilizer Opener, Spading Closing Wheels & Drag Chains.
Martin-Till SmartClean Bidirectional
Air Control Kit that includes compressor (if required), necessary air line kit and air cylinders. This setup offers the best control by allowing you to set separate air psi to both sides of the air cylinder.
Martin-Till SmartClean Dual Valve
Air Control Kit that includes compressor (if required), necessary air line kit and air cylinders. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags.
Martin-Till SmartClean Gang Control
Air Control Kit that includes compressor (if required), necessary air line kit and air cylinders. Allows the operator to control of each section independently, whether you want section control for left, right or front gang, rear gang.
Martin-Till SmartClean Single Valve
Air Control Kit that includes compressor (if required), necessary air line kit and air cylinders. Allows you to set the psi and then select up, down, or float for your row cleaners.
Massey Ferguson Square Balers 1841, 1842, 1843N, 1843s, 1844N, 1844S: Rasspe Single Knotter, RS 6003, W/ and W/O Cam Gear
Massey Ferguson Square Balers 2150, 2160, 2170, 2170XD, 2240, 2250, 2260, 2270, 2270XD, 2290: Rasspe High-Density Double Knotter, RS 1450, W/ and W/O Cam Gear
Vertical Unloading Auger for Massey Ferguson
Radura Disc Mower Blades for Massey Ferguson
SCH EasyCut Cutter Bar Conversion Kits for Massey Ferguson
Unloading Auger Tubes for Massey Ferguson Combines
Unloading Augers for Massey Ferguson
OEM replacement guards available for Massey Ferguson 9250
MASSEY FERGUSON - CLAAS - 36,44
MASSEY FERGUSON - CLAAS - 8460
MASSEY FERGUSON - CLAAS 8450, 8460 Series
MASSEY FERGUSON - CLAAS 8450, 8460 Series - Roller Guide Kit
MASSEY FERGUSON - WHITE 8560, 9520 Series
MASSEY FERGUSON - WHITE 8560, 9520 Series - Roller Guide Kit
MASSEY FERGUSON - WHITE 8920 Series
MASSEY FERGUSON - WHITE 8920 Series - Roller Guide Kit
MASSEY FERGUSON - WHITE 9300 Series
MASSEY FERGUSON - WHITE 9300 Series - Roller Guide Kit
MASSEY FERGUSON - WHITE 9330 Series
MASSEY FERGUSON - WHITE 9750 ROTARY Series
MASSEY FERGUSON - WHITE 9750 ROTARY Series - Roller Guide Kit
MASSEY FERGUSON 220 Series - Roller Guide Kit
Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850
MASSEY FERGUSON 655, 675, 775, 785 Series
MASSEY FERGUSON 885 Series - Roller Guide Kit
MASSEY FERGUSON 9850 Series - Roller Guide Kit
Massey-White 9750 Series Headers
SCH Pro-Drive Kits for Massey-White 9750 Flex Headers
Please select if you are currently running the Massey-White cutter bar.
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
John Deere 7000, 7100
PPS Premium Complete Flange Bushing Parallel Arms Kits
MaxEmerge
John Deere 7000, 7100
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 2; John Deere 7200, 7300; fiberglass and poly box
PPS Premium Complete Flange Bushing Parallel Arms Kits
MaxEmerge 2
John Deere 7200, 7300
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
MaxEmerge 2, John Deere 7200, 7300
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 5
Available for John Deere 17X5 and DB series poly box; 17X5 and DB CCS/mini hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
MaxEmerge 5
Available for John Deere 17X5 and DB series poly box; 17X5 and DB CCS/mini hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
MaxEmerge 5
John Deere 17X5 and DB series poly box; 17X5 and DB CCS/mini hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge Plus
Available for John Deere 17X0 and DB series poly box; 17X0 and DB CCS/mini hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
MaxEmerge Plus
Available for John Deere 17X0 and DB series poly box; 17X0 and DB CCS/mini hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere 17X0 and DB series poly box; 17X0 and DB CCS/mini hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
MaxEmerge XP
John Deere 17X0 and DB series poly box; 17X0 and DB CCS/mini hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge XP
Available for John Deere 17X0 and DB series poly box; 17X0 and DB CCS/mini hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
MaxEmerge XP
Available for John Deere 17X0 and DB series poly box; 17X0 and DB CCS/mini hopper
WearParts Vertical Tillage blades for McFarlane
May Wes UHMW Poly Snout Savers for Case-IH - Metal Head
Meter Re-Power Kit, John Deere 7000, 7100; Kinze
Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover, SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.
Meter Re-Power Kit, John Deere 7200, 7300 and 1700 series
Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover, SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.
Bushel Plus Mini Combine - Identical Crop Samples to a Combine, Only Portable! Accurate Crop Samples in Less than 5 Minutes!
Samples collected are identical to a combine giving you the perfect sample size for moisture content tests and quality analysis.
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 9000 series planters - Mini-Hopper
PPS Premium Complete Parallel Arm Rebuild Kits for White 9000 series; Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits - White 9000 Series - Mini-Hopper
The Kinze Brush Meter Adapter is a conversion kit to adapt to Kinze Brush-Type Seed Meter to fit a John Deere 7200, 7300 and 1700 Series Finger Pick-Up Seed Box.
Graphite 1-lb and 5-lb containers - Used in all belt meter kits.
ML Reels Replacement Tines
ML Reels have a 1.375” (35 mm) tube with 0.4” ( 10 mm) round holes spaced approximately 4.5” ( 114 mm) apart. The tines have a round nub that fits into a round hole in the tube. Supplied from 1989- 1999.
SI Belt Meter Kits for Great Plains 1200 Drills
SI Belt Meter Kits for Great Plains 1205 Drills
SI Belt Meter Kits for Great Plains 1210 Drills
SI Belt Meter Kits for Great Plains 1500 Drills
SI Belt Meter Kits for Great Plains 1510 Drills
SI Belt Meter Kits for John Deere 1520 Drills
SI Belt Meter Kits for John Deere 1530 Drills
SI Belt Meter Kits for John Deere 1560 Drills
SI Belt Meter Kits for John Deere 1590 Drills
SI Belt Meter Kits for Great Plains 2000 Drills.
SI Belt Meter Kits for Great Plains 2010 Drills
SI Belt Meter Kits for Great Plains 2015 Drills
SI Belt Meter Kits for Great Plains 2400 Drills
SI Belt Meter Kits for Great Plains 2410 Drills
SI Belt Meter Kits for Great Plains 2SF24 Drills
SI Belt Meter Kits for Great Plains 3010 Drills.
SI Belt Meter Kits for Great Plains 3PD12 Drills
SI Belt Meter Kits for Great Plains 3PD14 Drills
SI Belt Meter Kits for Great Plains 3PD15 Drills
SI Belt Meter Kits for Great Plains 3PD20 Drills
SI Belt Meter Kits for John Deere 455 Drills
SI Belt Meter Kits for Case-IH 5400 Drills
Model 5400 Soybean Special Drill
SI Belt Meter Kits for Case-IH 5400 Soybean Special Drills
SI Belt Meter Kits for Case-IH 5500 Drills
Model 5500 Soybean Special Drill
SI Belt Meter Kits for Case-IH 5500 Soybean Special Drills
SI Belt Meter Kits for John Deere 750 Drills
SI Belt Meter Kits for Great Plains SF30 Drills
SI Belt Meter Kits for Great Plains SS45 Drills
SI Belt Meter Kits for Great Plains SS'87 Drills
The Exapta Mojo Wire stiffener supplies up to 3 times the pressure to the standard Keeton.
The Exapta Mojo Wire improves the performance of your Keeton Seed Firmers in wet soil conditions with its self-cleaning action of the Keeton against the furrow sidewalls.
The Exapta Mojo Wire stiffener supplies up to 3 times the pressure to the standard Keeton. The Exapta Mojo Wire improves the performance of your Keeton Seed Firmers in wet soil conditions with its self-cleaning action of the Keeton against the furrow sidewalls.
Mojo Wire for Keeton Seed Firmers
The Exapta Mojo Wire stiffener supplies up to 3 times the pressure to the standard Keeton.
The Exapta Mojo Wire improves the performance of your Keeton Seed Firmers in wet soil conditions with its self-cleaning action of the Keeton against the furrow sidewalls.
Accessories for Keeton Seed Firmer - Mojo Wire Kits
Mojo Wire for Keeton Seed Firmers
The Exapta Mojo Wire stiffener supplies up to 3 times the pressure to the standard Keeton.
The Exapta Mojo Wire improves the performance of your Keeton Seed Firmers in wet soil conditions with its self-cleaning action of the Keeton against the furrow sidewalls.
Accessories for Keeton Seed Firmers - Mojo Wire Kits
Mojo Wire for Keeton Seed Firmers
The Exapta Mojo Wire stiffener supplies up to 3 times the pressure to the standard Keeton.
The Exapta Mojo Wire improves the performance of your Keeton Seed Firmers in wet soil conditions with its self-cleaning action of the Keeton against the furrow sidewalls.
Mojo Wire for Keeton Seed Firmers
Keeton Seed Firmer Accessories - Mojo Wire Kits
Mojo Wire for Keeton Seed Firmers
Keeton Seed Firmer Accessories - Mojo Wire Kits
TRAIL JET FERTILIZER OPENER - MONOSEM
Rebounder Seed Deflectors - Monosem Planters
Rebounder Seed Deflectors for Monosem Planters
Disc Openers for Monosem
Montezuma Triangle Toolboxes were born on the farms and ranches of Kansas. The innovative lid design on the iconic triangle toolbox was designed to keep tools locked in position, even when driving in rough terrain.
When open, Montezuma tool boxes allow you to organize up to 280 metric and/or S.A.E. tools and see them all at a glance.
When closed, the trademarked locking lid design holds tools in position, creating protection, security and organization.
Air cylinder mounting brackets available for Kinze, Martin and Yetter row cleaners. Not required with Martin-Till ACCR row cleaners.
Air cylinder mounting brackets available for Kinze, Martin and Yetter row cleaners.
MudSmith Gauge Wheel Assemblies
MudSmith Gauge Wheels Greatly Improve Planting Efficiency During Wet Soil Conditions. The patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings.
MudSmith Gauge Wheel Assemblies
MudSmith Gauge Wheels Greatly Improve Planting Efficiency During Wet Soil Conditions. The patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings.
MudSmith Gauge Wheel Assemblies
MudSmith Gauge Wheels Greatly Improve Planting Efficiency During Wet Soil Conditions. The patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings.
MudSmith Gauge Wheel Assemblies
MudSmith Gauge Wheels Greatly Improve Planting Efficiency During Wet Soil Conditions. The patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings.
Mudsmith gauge wheel, tire only
Mur-Lok Fittings are leak-resistant dual EPDM O-Rings, made of chemical-resistant polypropylene and are NSF Standard 58 Certified.
Mur-Lok Fittings are leak-resistant dual EPDM O-Rings, made of chemical-resistant polypropylene and are NSF Standard 58 Certified.
Disc Openers - New Holland - Drills and Air Seeders
Radura Disc Mower Blades, New Holland
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for New Holland SP280, SP380, SP480 and SP580.
New Holland BB980 Square Baler - High-Density Double Knotter, RS 1450, W/ and W/O Cam Gear
May Wes UHMW poly Ear Savers for New Holland
SCH EasyCut Cutter Bar Conversion Kits for New Holland
G4 Stalk Stomper kits available for New Holland 96C, 99C, 96D, 98C, 98D, 996 and 980CF series cornheads.
Stalk Stompers for Tractors Kits, for New Holland models, includes mounting brackets, lift arm assemblies, shoe configuration and hydraulic hose kit.
Please call for complete Reel replacement options for other combines and swathers not listed.
May Wes Poly Auger Trough Liners for Grain Tanks
• Guards against corrosion
• Provides a smooth, slick surface for the grain to flow out of the grain tank.
• Full coverage of the trough underneath the auger keeps grain in the tank for maximum harvest potential.
OEM replacement guards available for 72C, 74C, 84C, 86C, 740CF, 840CD, 880CF
Bushel Plus MAD Concaves for New Holland
Compatible with all 22" twin rotor.
New Holland - NH TR96 and NH TR99; (verify measurement before ordering)
New Holland 1475, 2450, 2550, 2300 Series
New Holland 472, 477, 478 Series
New Holland 499, 1499, 1469, 1496 Series
Orbit Trac II kit available for New Holland 72C and 74C.
Orbit Trac II kit available for New Holland 73C.
Orbit Trac II kit available for New Holland 740CF.
Poly Skid Shoes available for 20', 25', 30' and 35'.
New Holland 740CF - 10-1/4" Long
NEW HOLLAND 740CF - Roller Guide Kit
New Holland 740CF Replacement Parts
New Holland 74C - 10-5/8" Long
New Holland 74C - Before Serial #PNL017183 including all HAJ
Poly Skid Shoes available for 20', 25' and 30'.
New Holland 74C - Before Serial #PNL017183 including all HAJ Replacement Parts
New Holland 74C - S/N PNL017183 - PNL017800
Poly Skid Shoes available for 20', 25' and 30'.
New Holland 74C - S/N PNL017183 - PNL017800 Replacement Parts
New Holland 74C - S/N PNL017801 - PNL018300
Poly Skid Shoes available for 20', 25' and 30'.
New Holland 74C - S/N PNL017801 - PNL018300 Replacement Parts
New Holland 74C - S/N PNL018301 & Later, Y9ZL & YAZL
Poly SKid Shoes available for 20', 25, 30' and 35'.
New Holland 74C - S/N PNL018301 & Later, Y9ZL & YAZL Replacement Parts
New Holland 74C Series Grain Head
New Holland 74C Grain Head Auger Trough Liner available for 20', 25', 30' and 35' platforms
New Holland 84C - 7-7/16" Long
New Holland 84C - After Serial #PPP001119
Poly Skid Shoes available for 30', 36' and 39'.
New Holland 84C - Before Serial #PPP001119
Poly Skid Shoes available for 30' and 36'.
Poly Skid Shoes available for 30', 35', 40' and 45'.
New Holland 86C/83C/82C - 8-7/8" Long
New Holland 86C/83C/82C Replacement Parts
Poly Skid Shoes available for 25', 30', 35', 40' and 45'.
New Holland 880CF/840CD Replacment Parts
NEW HOLLAND 94C Series - Roller Guide Kit
New Holland 96C, 96D, 98C, 98D series Corn Head
Available for 4, 6, 8 and 12 row cornheads
Orbit Trac II kit available for New Holland 970-973 series.
New Holland 971, 972, 973 - 10-1/4" Long
New Holland 972, 973 Series Grain Head
New Holland 972, 973 Grain Head Auger Trough Liner available for 13'-16', 18'-20', 22'-24', 25' and 30' platforms
NEW HOLLAND 972, 973, 73C & 74C Series
NEW HOLLAND 972, 973, 73C & 74C Series - Roller Guide Kit
Poly Skid Shoes available for 13', 15', 16', 18', 20', 22', 24', 25' and 30'.
New Holland 973/73C Replacement Parts
New Holland 996 Series Corn Head
Available for 4, 6, 8 and 12 row cornheads
New Holland Self-Propelled Chopper
Radura Rotary Disc Mower Blades for New Idea
Norseman Roller Bearing Gauge Wheel Arm Kits will outlast any gauge wheel arm on the market today. These Norseman cast replacement arms feature the industry-standard 5203KYY2 sealed bearing. This double-roller bearing stays tight and withstands the abuse, unlike the OEM threaded bushings. The Norseman gauge wheel arms that are distributed by S.I. Distributing are made in the USA, with the same standard of excellence. Available for specific John Deere and Kinze planters.
High Speed Compact Disc Blades for Norwood
Caps, filters, seals and miscellaneous.
NutriPhi is specifically designed for beef, dairy, and hog operations to help manage solids, reduce run-off, and diminish harmful odors in barns, houses, and lagoons.
SCH Knifeheads available for Pro-Drive with OEM Cutter Bar
OEM Replacement Knife Assemblies
OEM Replacement Knife Assemblies for Case-IH, John Deere and MacDon.
- Hardened knife connection
- Screw connection of all parts
- Easy exchange of blades and sections
- For all conventional forged guard cutting
OEM Replacement Knifeheads available for Case-IH, MacDon and John Deere.
OEM Replacement Parts for AGCO, Case-IH, John Deere, MacDon and New Holland.
OEM replacement knife assemblies are sectional so they can be shipped by UPS. Same high quality parts as original equipment knife assemblies. Includes all hardware for assembly. We also have OEM replacement guards and sections available.
The One Wrench adjusts John Deere 750 & 1850 grain drills depth using only one hand and one wrench.
The design incorporates several pads that are used to depress the locking pin of the adjusting plate.
Uniforce Optional Accessories
Otico Farmflex Gauge Wheel Assemblies
Otico Farmflex Gauge Wheels are the industry leaders in agronomic performance and wear resistance. Their wheel technology and rim & bearing design is unmatched for strength and efficiency. Available in solid & spoked assemblies and replacement tires.
Otico Farmflex Gauge Wheel Assemblies
Otico Farmflex Gauge Wheels are the industry leaders in agronomic performance and wear resistance. Their wheel technology and rim & bearing design is unmatched for strength and efficiency.
Otico Farmflex Gauge Wheel Assemblies
Otico Farmflex Gauge Wheels are the industry leaders in agronomic performance and wear resistance. Their wheel technology and rim & bearing design is unmatched for strength and efficiency. Available in solid & spoked assemblies and replacement tires.
Otico FARMFLEX Gauge Wheel Assemblies
Otico Farmflex Gauge Wheels are the industry leaders in agronomic performance and wear resistance. Their wheel technology and rim & bearing design is unmatched for strength and efficiency. Available in solid & spoked assemblies and replacement tires.
Otico Gauge Wheel Tire
Otico Gauge Wheel Tire
Otico Solid Gauge Wheel Assembly
Solid Gauge Wheel Assembly
• 16” diameter x 3” or 4.5” width
• Fits most makes and models
Otico Solid Gauge Wheel Assembly
Otico Solid Gauge Wheel Assembly
Otico Spoked Gauge Wheel Assembly
Otico Spoked Gauge Wheel Assembly
• 16” diameter x 3” or 4.5” width
• Fits most makes and models
Otico Spoked Gauge Wheel Assembly
Otico Spoked Gauge Wheel Assembly
Outback Max Camera Kit
Outback Wrap- "The Snake Collection" - Bulk Wrap
The Outback Wrap Bulk Wrap - "The Snake Collection" can be used to wrap entire planters, other implements or electrical cables. "The Snake Collection" is availabe in three different sizes: Constrictor Wrap (5/8” or 16mm diameter); Python Wrap (13/16” or 20mm diameter); and the Anaconda Wrap (1-1/4” or 32mm diameter).
Outback Wrap- "The Snake Collection" - Bulk Wrap
The Outback Wrap Bulk Wrap - "The Snake Collection" can be used to wrap entire planters, other implements or electrical cables. "The Snake Collection" is availabe in three different sizes: Constrictor Wrap (5/8” or 16mm diameter); Python Wrap (13/16” or 20mm diameter); and the Anaconda Wrap (1-1/4” or 32mm diameter).
Outback Wrap- "The Snake Collection" - Bulk Wrap
Outback Wrap Hydraulic Hose Markers
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
Outback Wrap- "The Snake Collection" - Bulk Wrap
The Outback Wrap Bulk Wrap - "The Snake Collection" can be used to wrap entire planters, other implements or electrical cables. "The Snake Collection" is availabe in three different sizes: Constrictor Wrap (5/8” or 16mm diameter); Python Wrap (13/16” or 20mm diameter); and the Anaconda Wrap (1-1/4” or 32mm diameter).
Outback Wrap "The Snake Collection" - Bulk Wrap
The Outback Wrap Bulk Wrap - "The Snake Collection" can be used to wrap entire planters, other implements or electrical cables. "The Snake Collection" is availabe in three different sizes: Constrictor Wrap (5/8” or 16mm diameter); Python Wrap (13/16” or 20mm diameter); and the Anaconda Wrap (1-1/4” or 32mm diameter).
Outback Wrap Bat Wrap is a heavy duty velcro wrap used to bundle and lift hoses, cables or wires, up to 700 pounds, out of the way. Easy to use: just wrap the Bat Wrap around the hoses, cables or wires and secure with a tarp strap or rope.
The Outback Wrap Fuel Finder is designed to identify your fuel tank hoses and makes fueling up easy. Send your hired man, kid, neighbor, wife or husband to the fuel tanks to have them fill up without second guessing!
Outback Wrap Hose Boss is a BIG step up from the Outback Back Hose Tamer. The Hose Boss is a four-foot long wrap that is three inches in diameter. Made of heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses.
Outback Wrap Hose Boss is a BIG step up from the Outback Wrap Hose Tamer. The Hose Boss is a four-foot long wrap that is three inches in diameter. Made of heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses.
Outback Wrap Hose Boss is a BIG step up from the Outback Wrap Hose Tamer. The Hose Boss is a four-foot long wrap that is three inches in diameter. Made of heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses.
The Outback Wrap Hose Boss is a BIG step up from the Outback Wrap Hose Tamer. The Hose Boss is a four-foot long wrap that is three inches in diameter. Made of heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses.
Outback Wrap Hose Boss is a BIG step up from the Outback Wrap Hose Tamer. The Hose Boss is a four-foot long wrap that is three inches in diameter. Made of heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses.
The Outback Wrap Hose Boss is a BIG step up from the Outback Wrap Hose Tamer. The Hose Boss is a four-foot long wrap that is three inches in diameter. Made of heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses.
Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2".
A simple Hose Identification System that's SIMPLY INGENIOUS! No tools required for installation! Can last up to 10 years or more!
OUTBACK WRAP Hose Markers & Hose Tamers
Outback Wrap Hydraulic Hose Markers
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
Outback Wrap Hydraulic Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
Outback Wrap Hydraulic Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
Outback Wrap Hydraulic Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
Outback Wrap Hydraulic Hose Markers / Hose Tamers
Outback Wrap Hydraulic Hose Markers; Outback Wrap Bat Wrap; Outback Wrap Fuel Finder
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
Outback Wrap Hydraulic Hose Markers / Hose Tamers
Outback Wrap Hydraulic Hose Markers
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
Outback Wrap Hydraulic Hose Markers and Hose Tamers
Outback Wrap Hydraulic Hose Markers
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
Outback Wrap Hydraulic Hose Markers, Hose Tamers
Outback Wrap Hydraulic Hose Markers
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
Outback Wrap Hydraulic Hose Markers, Hose Tamers
Outback Wrap Hydraulic Hose Markers
Outback Wrap Hose Tamers; Outback Wrap Hose Boss; Outback Wrap Bulk Wrap
The Outback Wrap Bulk Wrap - "The Snake Collection" can be used to wrap entire planters, other implements or electrical cables. "The Snake Collection" is availabe in three different sizes: Constrictor Wrap (5/8” or 16mm diameter); Python Wrap (13/16” or 20mm diameter); and the Anaconda Wrap (1-1/4” or 32mm diameter).
Outback Wrap Hydraulic Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
Outback Wrap Hydraulic Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
Outback Wrap Hydraulic Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
Outback Wraps Hydraulic Hose Marker
Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2".
A simple Hose Identification System that's SIMPLY INGENIOUS! No tools required for installation! Can last up to 10 years or more!
Outback Wraps Hydraulic Hose Markers
Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2".
A simple Hose Identification System that's SIMPLY INGENIOUS! No tools required for installation! Can last up to 10 years or more!
Outback Wraps Hydraulic Hose Markers
Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2".
A simple Hose Identification System that's SIMPLY INGENIOUS! No tools required for installation! Can last up to 10 years or more!
Outback Wraps Hydraulic Hose Markers
Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2".
A simple Hose Identification System that's SIMPLY INGENIOUS!
No tools required for installation! Can last up to 10 years or more!
Outback Wraps Hydraulic Hose Markers
Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2".
A simple Hose Identification System that's SIMPLY INGENIOUS! No tools required for installation! Can last up to 10 years or more!
Paddle Tines and Five-Finger Quick Tines
High Performance Tines for Short or Sparse Crops
PADDLE TINE The Paddle's six-inch width lifts and feeds crop that standard tines miss. The Paddle is designed to provide a complete sweep of the header with each rotation.
5-FINGER QUICK TINE The unique 5-finger design "grabs" short, sparse or specialty crops more consistently and evenly. Designed for use in soybeans, wheat, canola, chickpeas, lupins and flax.
Parallel Arms Rebuild Kits - PPS Flange Bushing
PPS Premium Complete Flange Bushing Rebuild Kits, with Parallel Arms
PPS Rebuild-Your-Existing-Parallel-Arms (Hardware Only) Kits
PPS No-Ream Complete Flange Bushing Rebuild Kits, with Parallel Arms
Replace worn parallel arms and bushings in parrallel linkage for John Deere and Kinze Planters.
Parallel Linkage including Parallel Linkage Rebuild Kits, Upper Parallel Arms and Lower Parallel Arms
VisionWorks Wired Camera Systems - Parts and Accessories
VisionWorks Wireless Camera Systems - Parts and Accessories
PheNom™ is a nitrogen fixing biological bacteria blend of 2 endophytes bacteria. One lives in the plant above ground and supplies nitrogen from the air, the other increases efficiency of how the plant uses phosphorous. If you are wanting to increase the supply of nitrogen and increase phosphorus efficiency to your crop, try PheNom applied as a seed treatment, in furrow or foliar.
PheNom™ is a nitrogen fixing biological bacteria blend of 2 endophytes bacteria. One lives in the plant above ground and supplies nitrogen from the air, the other increases efficiency of how the plant uses phosphorous. If you are wanting to increase the supply of nitrogen and increase phosphorus efficiency to your crop, try PheNom applied as a seed treatment, in furrow or foliar.
PheNom™ is a nitrogen fixing biological bacteria blend of 2 endophytes bacteria. One lives in the plant above ground and supplies nitrogen from the air, the other increases efficiency of how the plant uses phosphorous. If you are wanting to increase the supply of nitrogen and increase phosphorus efficiency to your crop, try PheNom applied as a seed treatment, in furrow or foliar.
Products include: Acres Plus Seed Box Toppers, Air Design Scrapers, Depth-A-Matic, Down Pressure Spring Package, Seed Tube Guard, Trail Jet and the Trash Guard
Rebounder seed deflectors, for planters, funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Rebounder seed deflectors, for planters, funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Mur-lok Plug
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 2; Poly Box
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge2; Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge Plus; Poly Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge Plus; Poly Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 5; Poly Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge XP/Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge 5; Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge XP; Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge XP; Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
Poly Box Planter
UHMW-PE poly capped bolts are an excellent solution for applications where there is excessive friction and wear or high velocity. They excel at protecting steel, aluminum and wood surfaces. The entire bolt head is covered with compression molded Ultra High Molecular Weight Polyethylene (UHMW-PE).
Poly Cutting Edges (also known as Poly Blades) protect smooth, hard surfaces such as cobblestone and pavements that can be damaged by equipment while plowing. May Wes cutting edges are custom made from UHMW poly.
Includes poly finger and guide
Includes poly finger only
Poly Grain Tank Auger Floor Liner
May Wes Poly Auger Trough Liners for Grain Tanks
• Guards against corrosion
• Provides a smooth, slick surface for the grain to flow out of the grain tank.
• Full coverage of the trough underneath the auger keeps grain in the tank for maximum harvest potential.
May Wes UHMW Poly Snout Savers for Poly Heads
Don't Settle for Metal! Replace your baler’s metal bands with May Wes poly pickup bands. These bands are manufactured from impact resistant plastic and will not bend or break when you hit rocks or other objects in the field.
Polytine Reels Replacement Reels
Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” ( 114 mm) apart. The tines fit into the notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989.
Additional accessories for Precision Planter Solutions parallel arm kits, including Delta Force brackets, Kinze set back brackets, and more.
PPS Complete Parallel Arm Kits - Premium
• Eliminates ALL Areas of Unwanted Movement in the Parallel Arms
• Best option for optimal planter repair
• PPS arms are laser cut, robotically welded, and are purposely built heavy to withstand high speeds and hydraulic down pressure.
PPS Parallel Arm Flange Bushing Kits
The PPS Premium Complete Flange Bushing Rebuild Kits with Parallel Arms and the PPS Rebuild-Your-Existing-Parallel-Arms (Hardware Only) Kits will eliminate ALL areas of unwanted movement in the parallel linkage arms. There is also the option of the PPS No-Ream Complete Flange Bushing Kit with Parallel Arms.
Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles.
Precision Finger Pickup Meters
Precision Meters & Parts. Because the components all mesh perfectly, Precision Meters hold one seed at a time, then release it. They’re engineered and built to do it again and again. You’ll see fewer skips and doubles – and higher yield.
The shape and design of the finger determines how well it can singulate and hold a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
Precision Meter & Bullseye Seed Tube
Consists of the Precision Meter & Universal Bullseye Seed Tube.
If you don’t need a whole new meter, you can still improve your spacing with Precision Meter finger sets, backing plates or belts.
Precision Meters - Great Plains
Precision Meters available for Great Plains planters.
Precision Meters available for John Deere 7000, 7100, 7200 and 1700 series. Also available for Kinze 2000 series.
Precision Meters available for Kinze 3000 series.
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Precision Planting Ready row units
PPS PREMIUM COMPLETE KITS WITH PARALLEL ARMS - PRECISION PLANTING
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms
Precision Planting-ready row units
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Precision Planting-Ready row units
Rebounder Seed Deflectors - Precision Planting Planters
Rebounder Seed Deflectors for Precision Planting Planters
Precision Planting's CleanSweep Row-Cleaner Control System is a dual air cylinder that lets you set and adjust your row cleaners’ down pressure from the cab, on the go.
The CleanSweep system includes air cylinders, lines, air tank, compressor and controller.
Precision Planting SeedRight Seed Plates
Simple Retrofit for Precision Planting Meters --- Large Cell Disc: For use with Precision Planting vSet meters. Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. BundleDrop Seed Plate: Plant soybeans in bundles! This “team” approach can help to improve emergence and overall plant stand.
Precision Planting SeedRight Seed Plates
Simple Retrofit for Precision Planting Meters
Large Cell Disc: For use with Precision Planting vSet meters. Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. Seed mixes containing primarily large sized seeds (wheat & cereal rye) can also be used.
Precision PopMax Backing Plate
The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes.
With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion.
The new SureFire™ cupped seed belt releases seed down the center every time for sure spacing and more ears.
Prior to serial number HAJ300001
With the Pro Chute, empty your seed boxes directly, smoothly and quickly into your planter. In as little as two to four minutes you can empty your seed box. Use for loading and unloading your planter.
With the Pro Chute, empty your seed boxes directly, smoothly and quickly into your planter. In as little as two to four minutes you can empty your seed box. Use for loading and unloading your planter.
With the Pro Chute, empty your seed boxes directly, smoothly and quickly into your planter. In as little as two to four minutes you can empty your seed box. Use for loading and unloading your planter.
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
Will fit hoses up to 13/16" in diameter.
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
Radura Rotary Disc Mower Blades for PZ Zeegers
Quick Attach tails are fast and easy to replace
• Design allows the tail to be snapped into place and be changed without removing seed openers or gauge wheels.
• Replacement tails are more affordable than Universal replacement tails.
Quick Attach tails are fast and easy to replace
• Design allows the tail to be snapped into place and be changed without removing seed openers or gauge wheels.
• Replacement tails are more affordable than Universal replacement tails.
10 Degree Blade
Radura Rotary Disc Mower Blades
Radura rotary disc mower blades have been used to cut hay, alfalfa and grass for over 50 years. With the special cold rolled process used on the cutting edge of the radura blade, the results are a more wear-resistant edge that maintains its sharpness longer.
Rasspe has a long-standing tradition of superior reliability and durability in twine knotters for square balers.
RS 1450 High Density Double Knotter
RS 6003 Single Knotter
RB46, RB46B, RB463A, RB56B, RB563A
Confirm serial number
ReadyVision WiFi cameras are wireless cameras that connect directly to your mobile Android or IOS device via a dedicated app and WiFi signal. No network or data access required.
Reamers and Cutting Oil
BruteLube multi-purpose cutting and tapping fluid. Speciality formulated to extend tool life and reduce chip welding.
Reamers and drill bit for PPS flange bushing kit
Rebounder seed deflectors funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce, resulting in seeds being flipped on top of the soil.
Rebounder seed deflectors funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Rebuild Your Existing Parallel Arm Kits
The PPS Rebuild-Your-Existing-Parallel-Arms Flange Bushing (Hardware Only) Kits for planters make your old and worn parallel linkage arms better than new! On your existing parallel arms, all of the wear now takes place on the kit’s replaceable parts.
These parts include a hardened flange bushing and a threaded hex bushing that fits into the flange bushing. The installer reams out the existing worn hole in the arm a little larger for a more precise fit for the bushings.
Replacement Closing Wheel Parts
Martin-Till Closing Wheel Replacement Parts including bolts, bearings, dust caps, closing wheels, spiked wheels and more.
Replacement Hubs
Replacement Parts for Fertilizer Openers - Single & Dual UMOs, which includes poly straps, metal straps, axles, hubs, springs, blades, bearings, seals and furrow shoes.
TRAIL JET FERTILIZER OPENER REPLACEMENT PARTS
If, for any reason, you are in need a replacement reel, please consider HCC Replacement Reel Bundles.
HCC Replacement Reel Bundles consist of the reel’s center tube and the six bat tubes with the tines already installed.
Martin replacement wheels
Retractable Poly Augers Fingers
Keep your auger feeding smoothly and efficiently - with NO harm to the combine. The May Wes Poly Retractable Fingers are an ideal alternative to metal fingers because they are far less damaging when a metal finger breaks and is fed through the combine. Unlike metal, broken poly will disintegrate before causing equipment damage.
PPS Flange Bushing Rebuild Kit for Martin Row Cleaners WA1345, WA1360 and C125 row cleaners
Row Divider Shields are the remedy for worn row dividers on John Deere chopping heads. Extend the life. The durable UHMW shield reinforces the divider and covers worn spots.
Rubber Closing Wheels
Rebounder Seed Deflectors for Salford Drills
Rebounder Seed Deflectors for Salford Drills
CHALLENGER SB44: RASSPE HD DOUBLE KNOTTER, RS 1450
SB521, SB531, SB541, SB551, SBX520, SBX530, SBX540, SBX550
Please select if you are currently running the SCH Cutter Bar.
Please select if you are currently running the SCH cutter bar.
Please select if you are currently running the SCH cutter bar.
Please select if you are currently running the SCH cutter bar.
The SCH EasyCut guard is manufactured using a special alloy steel. A subsequent special hardening process gives the guard extremely high hardness, durability and wear life.
The SCH EasyCut guard is manufactured using a special alloy steel. A subsequent special hardening process gives the guard extremely high hardness, durability and wear life.
SCH Easy Cut II Replacement Knife Sections
SCH Pro Cut knife sections are completely thru-hardened, therefore extremely tough. They don’t bend. Therefore, when hitting large stones or other objects, damage to guards is eliminated which is not the case with regular sections. TWO-FOLD SHARPNESS: SCH sections for variable blade assembly (top and bottom cutting) for a smooth knife run.
Each SCH Easy Cut II Cutter bar (sickle bar)Conversion Kit includes: knife assembly, rollers (if roller kit ordered); knifehead; guards; spacer plates or wear plates, mounting hardware, spare parts, mounting instructions.
Each SCH Easy Cut II Cutter bar Conversion Kit includes: knife assembly, rollers (if roller kit ordered); knifehead; guards; spacer plates or wear plates, mounting hardware, spare parts, mounting instructions.
The SCH Easy Cut II cutterbar system eliminates the need for any adjustments, meaning more uptime and less maintenance. High quality spring steel guards, completely hardened sections and roller guides give the system durability and low maintenance.
SCH EasyCut II Knife Assemblies
Replacement SCH Knife Assemblies and SCH Knife Connector Kits
Today platforms are 30 feet or wider. Knife assemblies in one piece are very difficult to handle and transport. The SCH sectionalized knife assemblies eliminate this problem.
S.I. Distributing has created parts bags/package to make it easier for you to stock spare parts. We like to call it an "inexpensive insurance policy" in case you need a replacement part on a Friday night, for example. These kits include a range of spare parts that vary depending on the platform. The wear plates and roller guides package includes a bag that you can store in your vehicle for easy access to parts.
SCH Easycut II Product Reviews
Reviews for the SCH Easy Cut II Cutting System
SCH EasyCut Parts include guards, knife sections and knifeheads.
SCH EasyCut Parts include guards, knife sections and knifeheads.
The advantages of the SCH Roller Guides on the SCH Easy Cut Cutting System: less knifeback wear, less friction, less knifeback breakage, easier knife installation, less power required to drive the knife, less platform vibration
The advantages of the SCH Roller Guides on the SCH Easy Cut Cutting System: less knifeback wear, less friction, less knifeback breakage, easier knife installation, less power required to drive the knife, less platform vibration
Bolt, 6mm x 16mm, for section.; Bolt, 6mm x 18mm, for knifehead and splice kit; Bolt, 6mm x 20mm, for knifehead; Bolt, 6mm x 25mm, for knifehead; Machined washer for the SCH ball joint knifehead; Nut for the SCH ball joint knifeheads.
SCH hedge trimmers offer straight, smooth and precision cuts which encourage a healthy re-growth.
Applications include: orchard vegetation management, specialty crop harvesting, hedge/shrub cutters, roadside management
SCH EasyCut II knifeheads
SCH EasyCut II knifeheads
SCH Knifeheads available for Pro-Drive with SCH Cutter Bar
SCH Easy Cut II Skid Plates
SCH EasyCut Spacer Plates
SCH Wear Plates
The Model 1000 Bumper is specifically designed for heavy-duty use on all standard size pickup trucks and 2 ton trucks.
Schuck Cushion Hitches & Bumpers
Schuck Cushion Hitches - Swivel Tongue for Quick, Easy Hook-Ups
Eliminate the frustrating job of backing into an exact position for hookup.
The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.
The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.
Use Your Planter for Planting Cover Crops and Small Grains! The proven SeedRight seed plates allow growers with John Deere, Precision Planting, and Kinze vacuum meters the flexibility to accurately plant cover crops and small grains. These include wheat, oats, cereal rye, turnips, radishes, crimson clover and more.
B4
Envita
IonFx
PheNom
Soyfx
Envita
IonFx
PheNom
Soyfx
Seed Tube Guards / Inside Scraper
PLT000302 Seed tube guard, Kinze inner guard scraper, for Kinze 3000 series.
PLT080203 Seed tube guard, John Deere XP Pro, ME5
PLT061577 Seed tube guard, John Deere, Kinze
Use Your Planter for Planting Cover Crops, Wheat and Small Grains! The proven SeedRight Seed Plates allow growers with John Deere, Precision Planting, and Kinze vacuum meters the flexibility to accurately plant cover crops, wheat and small grains. These include oats, cereal rye, turnips, radishes, crimson clover and more.
Set Screw Style Bearing
Set Screw Style Bearing
Set Screw Style Bearing
Set Screw Style Bearing
Set-N-Seed is a planter seed depth calibration tool designed to accurately and efficiently set the desired depth of your planter row unit. Whether you are out in the field, needing to set depth after changing a row unit part, or in the shop getting ready to plant, Set-N-Seed can get you the correct depth anywhere on level ground.
Shield Ag drill disc assemblies for John Deere and Great Plains.
The SI Belt Meter will singulate the seed and maintain an accurate population control over a wide range of seed sizes. (2,000 to 4,000 actual seeds per pound). Now you can plant the seed population per acre you choose without guessing or adjusting your drill each time that you change seed sizes.
All kits include:
• S.I. Belt Meter for each opener
• Transmission conversion kit(s)
• New seed charts
• Installation instructions
• Extra belt meter, cutoff brush, cotter pin?
• S.I. Belt Meter for each opener
• Transmission conversion kit(s)
• New seed charts
• Installation instructions
• Extra belt meter, cutoff brush, cotter pin?
S.I. Belt Meter Parts
Single 15" Spike Closing Wheel
Consider the Martin-Till 15" Single Spike Closing Wheel for compaction-free closing of the seed trench in wet or harsh conditions. The 15” spading closing wheel should be paired with a 12” rubber or cast wheel. The 3/8” thick, 15” diameter right and left toothed steel wheels feature diamond shaped points.
Single 15" Spike Closing Wheel
Consider the Martin-Till 15" Single Spike Closing Wheel for compaction-free closing of the seed trench in wet or harsh conditions. The 15” spading closing wheel should be paired with a 12” rubber or cast wheel. The 3/8” thick, 15” diameter right and left toothed steel wheels feature diamond shaped points.
The Skid Steer Hitch is a handy attachment allows you to quickly add a standard 2″ trailer hitch receiver (not included) to your skid loader so you can move trailers around your farm yard with your skid steer. Lightweight and easy to install and remove, it will fit right in your truck toolbox!
11 Degree Radura Mower Blades
SM165, SM206, SM215, SM216, SM240
10 Degree Radura Mower Blades
Adjust your row cleaners on the go with a simple, easy-to-use smartphone app.
The exclusive Martin-Till® Smart Clean™ Row Cleaner Adjustment System combines a wireless connection with an easy-to-use mobile app to allow the operator to raise and lower floating row units on the go by varying the amount of air pressure in the cylinders.
SmartClean Row-Cleaner Air Control System
Adjust your row cleaners on the go with a simple, easy-to-use smartphone app.
The exclusive Martin-Till® Smart Clean™ Row Cleaner Adjustment System combines a wireless connection with an easy-to-use mobile app to allow the operator to raise and lower floating row units on the go by varying the amount of air pressure in the cylinders.
S.I. Distributing stocks replacement tines, bearings and other wear items for the Smart-Till residue management tool.
Prevent Damage to your Combine Snouts with the May Wes Snout Saver!
Solid gauge wheel assemblies
SoyFx is a soybean specific biostimulant and is a specific/unique combination of identified and tested microbials that elicit a positive crop response.
SoyFx is a soybean specific biostimulant and is a specific/unique combination of identified and tested microbials that elicit a positive crop response.
SoyFx is a soybean specific biostimulant and is a specific/unique combination of identified and tested microbials that elicit a positive crop response.
PPS Premium Complete Flange Bushing Parallel Linkage Arm Rebuild Kits for Kinze 2000 series; Split Row - Push Unit
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 3000 planters; Split Row - Push Unit
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 2000 series planters; Split Row - Push Unit
PPS Premium Complete Flange Bushing Parallel Arm Kit for Kinze 3000 Series- Split Row - Push Unit
Split Row - Push Unit with DeltaForce
PPS Premium Complete Flange Bushing Parallel Arm Kit for Kinze 3000 series, Split Row - Push Unit with DeltaForce
Split Row - Push Unit with DeltaForce
Split Row - Push Unit with SureForce
Split Row - Push Unit with SureForce
PPS Premium Complete Flange Bushing Parallel Arm Kit for Kinze 3000 series, Split Row - Push Unit with SureForce
Spoked gauge wheel assemblies available for Case-IH, Great Plains, John Deere, Kinze, Monsom and White.
Spoked gauge wheel assemblies available for Case-IH, Great Plains, John Deere, Kinze, Monsom and White.
Sponge Gun - Red Weeder - Sponge Dauber
Sponge Gun - Red Weeder - Sponge Dauber
Environmentally-Friendly Weed Control for Ag & Landscaping as well as Home & Garden Weed Control
• Apply drift free, even on a windy day • Save money on solutions
Stainless Steel Grain Tank Auger Floor Liner
Durable Compression Molded UHMW G4 Stalk Stompers for Tractors! May Wes G4 Tractor Stalk Stompers are designed to work off of existing tractor hydraulics. Kits are available for popular tractor models for John Deere, Case IH, New Holland, and Challenger; universal kits also are available for other makes and models.
Standard Replacement OEM Tines
Replacement OEM reel tines to match almost any reel on the market and deliver more grain to the combine!
PPS Premium Complete Flange Bushing Parallel Linkage Arm Rebuild Kits for Kinze 2000 series - Standard Row - Pull Unit
PPS Premium Complete Flange Bushing Parallel Arm Kit for Kinze 3000 series, Standard Row - Pull Unit
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 3000 planters; Standard Row - Pull Unit
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 2000 series planters; Standard Row - Pull Unit
Standard Row - Pull Unit with DeltaForce
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 2000 series planters; Standard Row - Pull Unit with DeltaForce
Standard Row - Pull Unit with DeltaForce
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 3000 planters; Standard Row - Pull Unit with DeltaForce
Standard Row - Pull Unit with DeltaForce
PPS Premium Complete Flange Bushing Parallel Arm Kit for Kinze 3000 series, Standard Row - Pull Unit with DeltaForce
Standard Row - Pull Unit with DeltaForce
PPS Premium Complete Flange Bushing Parallel Linkage Arm Rebuild Kits for Kinze 2000 series - Standard Row - Pull Unit with DeltaForce
Standard Row - Pull Unit with DeltaForce
Standard Row - Pull Unit with SureForce
Standard Row - Pull Unit with SureForce
PPS Premium Complete Flange Bushing Parallel Arm Kit for Kinze 3000 series, Standard Row - Pull Unit with SureForce
Standard Row - Pull Unit with SureForce
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Kinze 3000 planters; Standard Row - Pull Unit with SureForce
STEPS Grain Management consists of: the Smart Switch will automatically turn on/off the fans according to your settings; or you can manually turn the fans on/off ANYTIME and ANYWHERE.
With the Bin Monitor, you can know the temperature of your grain at the bottom of bin and the temperature and relative humidity in the headspace.
WearParts Vertical Tillage blades for Sunflower
Rebounder Seed Deflectors for Sunflower Drills
Rebounder Seed Deflectors for Sunflower Drills
Super Sponge Weed Wipers - 3-Point Hitch
DESIGNED FOR ROW CROP APPLICATIONS: Designed as a weed eliminating solution for row crop applications. The unit is designed to drive in between the rows so not to damage crops.
READY TO GO: Self-contained unit comes ready to go.
ADJUSTABLE ON THE GO: 3-point hitch model can be adjusted on the go by simply raising and lowering 3-point hitch.
Super Sponge Weed Wipers - ATV
ALTERNATIVE TO SPOT SPRAYING: Designed as a great alternative to spot spraying in hay and pasture ground. Save on labor and on chemical costs.
ADJUST HEIGHT BY HAND - POWER LIFT OPTION: ATV units can be adjusted by hand to the users preferred height.
ACCESSIBILITY: Designed to be easily attached to an ATV.
Super Sponge Weed Wipers - Build Your Own Kits
FLEXIBLE AND ADAPTABLE TO YOUR MACHINE: Since the unit comes with only the plumbing, you can use an existing boom or create an alternative mounting option that fits your application.
SAVE MONEY: Our kits are designed to give you exactly what you need to create your own weed wiper to save you money. You can cover more ground for a cheaper price.
Super Sponge Weed Wipers - Front Bucket
ALTERNATIVE TO SPOT SPRAYING: Designed as a great alternative to spot spraying in hay and pasture ground. Save on labor and on chemical costs by using ATV/Front Bucket weed wiper unit.
ADJUST HEIGHT BY HAND - POWER LIFT OPTION: Front bucket units can be adjusted by hand to the users preferred height.
ACCESSIBILITY: Designed to be easily attached to a front bucket tractor.
Super Sponge Weed Wipers - Pull Type Kits
USE FOR UNEVEN TERRAIN: Designed as a solution for uneven terrain. These pull type units have wheels and u-joints to contour to the uneven ground.
SELF-CONTAINED / "READY-TO-GO" UNIT: All you will need is the chemical of choice and an ATV or something to pull the unit.
GREAT FOR ROAD TRAVEL: These Pull-Type units are designed for road side travel.
Super Sponge Weed Wipers - Sprayer Boom Kits
EASY TO ATTACH: Easy height adjust and easy removal after you have wiped out your weeds.
SUPERIOR FEEDING SYSTEM: Instead of using a manifold system with a separate pump, sprayer kits are powered by your sprayer.
BIGGER IS BETTER: One of the major benefits of these sprayer kits is you can use anywhere from a 5 ft - 120 ft. kit.
Stalk Stompers for Tractors, New Holland T9.390
Stalk Stompers for Tractors, New Holland T9.435
Stalk Stompers for Tractors, New Holland T9.450
Stalk Stompers for Tractors, New Holland T9.480
Stalk Stompers for Tractors, New Holland T9.505
Stalk Stompers for Tractors, New Holland T9.530
Stalk Stompers for Tractors, New Holland T9.560
Stalk Stompers for Tractors, New Holland T9.565
Stalk Stompers for Tractors, New Holland T9.600
Stalk Stompers for Tractors, New Holland T9.615
Stalk Stompers for Tractors, New Holland T9.645
Stalk Stompers for Tractors, New Holland T9.670
Stalk Stompers for Tractors, New Holland T9.700
No more daily tailboard cleaning! The Tailboard Trash Blower Tube keeps crop residue from accumulating on the combine tailboard. Since the tube is slotted to direct air across the tailboard, the tailboard stays clean at all times. Fits John Deere S-Series combines: S650, S660, S670, S680, S690, S760, S770, S780 and S790.
Mur-lok Tee
Test Stand belt for S.I. Distributing's meter test stand and Precision Planting's MeterMax test stand.
The Sure Stop - Grain Handling Alignment Sensor
The Sure Stop Grain Handling Alignment Sensor
Perfect Alignment Every Time.The Sure Stop grain handling alignment sensor has a 90 Decibel Alarm and LED light signals for an exact stopping position. It is weather-resistant and accurate up to 13 feet.
The Thrash Master Concave System increases the thrashing surface area which gives your machine the ability to thrash better and more aggressively.
MONTEZUMA TOOLBOX, 22 X 13 X 14, STEEL
TOOLBOX, 30 X 15 X 18, ALUMINUM
MONTEZUMA TOOLBOX, 30 X 15 X 18, ALUMINUM
MONTEZUMA TOOLBOX, 30 X 15 X 18, STEEL
MONTEZUMA TOOLBOX, 30 X 19 X 20, STEEL
MONTEZUMA TOOLBOX, 36 X 17 X 21, STEEL
MONTEZUMA TOOLBOX, 41 X 18 X 21, STEEL
Tractor Stalk Stomper Kits without Mounts
Tractor Stalk Stomper Kits without Mounts, includes left & right lift arm assemblies, 35' Hydraulic hose kit and hardware. Tractor specific mounting bracket not included.
Tractor Stalk Stomper Kits without Mounts
Shoe sizes available in 14", 24", 32" and 38". Hydraulic kits available in 25', 30' and 35'.
The Trail-Jet Fertilizer Opener applies liquid fertilizer behind the planter, freeing up the front of the planter for other attachments.
TRAIL-JET NOZZLES
Keep your planter V-Closing wheels free of old stalks, lumps of soil and other field debris.
MagnoJet Turbo Fan Nozzles. Regular or Air Induction
MagnoJet Twin Flat Fan Nozzles. Regular or Air Induction.
Martin-Till Drag Chain Crumbles, Fills Unclosed Areas and LEVELS Soil above the Seed Slot
The row is leveled and air pockets are sealed behind the spading closing wheels. This helps even out the rate of drying and insures the soil does not dry past seed depth. Using a Marti-Till drag chain will help increase uniform emergence in the drier parts of the field and is recommended when using the closing wheels in minimum till.
Rebounder Seed Deflectors for Tye Drills
Rebounder Seed Deflectors for Tye Drills
Get your JD 50/60/90/Pro-series Drill to Work the Way it Should.
Uniforce hydraulic down pressure for John Deere 50, 60, 90 and Pro series drills. Uniform pressure on all openers.
Mur-lok Union
UMO (Unit Mounted Fertilizer Opener) Brackets
• Bracket mounts to seed disk opener shafts and around row unit shank.
• Has an adjustable tension screw.
• Available with dual liquid tube, dry tail or low profile tail
Unloading Auger Extension Kits
Unloading Auger Extension Kits for Case-IH, Gleaner and John Deere.
Unloading Auger Tubes for Case-IH, Gleaner, John Deere and Massey-Ferguson
Unloading augers for Case-IH, Gleaner, John Deere and Massey Ferguson.
Vacuum Meters - eSet and AccuVac Kits
The Precision Planting eSet Meter is a retrofit system that goes inside of a John Deere vacuum meter and uses a flat disk without cells that are sensitive to seed size and shape, paired with a floating singulator that doesn’t need adjustments. You simply set your vacuum, fill the planter with seed, and go.
Exapta Valion seed tube guards will eliminate seed tube wear and greatly reduce blade flex to create a properly shaped furrow and improved planting depth control. These guards are perfect for no-till or high-wear conditions, or anyone who is simply tired of replacing seed tube guards so often.
PPS No-Ream Complete Flange Bushing Parallel Arms Kits - White 9000 Series - VE (Vacuum Electric)
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 9000 series planters - VE (Vacuum Electric)
PPS Premium Complete Parallel Arm Rebuild Kits for White 9000 series; VE (Vacuum Electric)
Radura Rotary Disc Mower Blades for Vermeer
May Wes Vertical Poly Cutting Edges (also known as Poly Blades), for snow pushers and plows, protect smooth, hard surfaces such as cobblestone and pavements that can be damaged by equipment while plowing. May Wes cutting edges are custom made from UHMW poly.
A long winter of snowplowing can leave your driveway and parking lot scuffed and scratched. Avoid this expensive and unsightly snow removal damage with a May Wes UHMW Poly Cutting Edge.
WearParts Vertical Tillage Blades feature: razor edge, double bevel and a reverse crimp center They are available for Case-IH, Great Plains, Krause and Landoll.
Vertical Unloading Auger for Case-IH, John Deere and Massey Ferguson
Radura Rotary Disc Mower Blades for Vicon
VisionWorks Camera Systems increase safety and productivity, by offering a solution for eliminating blind spots while being extremely durable.
Narrow 45-degree frame, ideal for high-speed planting or narrow rows
-
CHU44C cast hubs and long life PEER SEEDXTREME 5205 double row bearing with 6 lip seal
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
SUPER SPONGE WEED WIPER: Super Sponge Weed Wipers’ pump-fed sponges hold and put more material on undesired weeds, without drift.
SPONGE GUN - AG & LANDSCAPING APPLICATION Super Sponge
RED WEEDER & SPONGE DAUBER - Home & Garden Weed Control - Apply drift free, even on a windy day
SUPER SPONGE WEED WIPERS - Cost Effective Weed Control with NO Drift
Great for Glyphosate-Resistant Weeds and Non-GMO Applications
Drift Free • Use Less Chemical • Target taller growing resistant weeds.
Re-distribute Weight from Center of Planter to Wings
The Martin-Till Weight Transfer System addresses this weight problem by redistributing excess weight from the center of the planter to the wings. Keeping the wings level and the row units in the ground will keep planting depth consistent through changing conditions.
Disc Openers for White
Rebounder Seed Deflectors for White Planters
Rebounder Seed Deflectors - White Planters
WA1345 row cleaner for White 6000, 8000, 9000 series
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 5000, 6000, 8000 and 9000 series planters
PPS PREMIUM COMPLETE FLANGE BUSHING KITS WITH PARALLEL ARMS - WHITE
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms
White 6000, 8000 and 9000 series
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for White 9000 series
TRAIL JET FERTILIZER OPENER - WHITE
Keeton Seed Firmers for White Planters, including Quick Attach, Universal and Seed Tube Mount brackets
VisionWorks Standard and High-Definition Wired Camera Systems are high-resolution, durable, and affordable camera systems, which carry a three-year camera warranty.
VisionWorks' Wireless Camera Systems are high-resolution, durable, and affordable camera systems, which carry a three-year camera warranty.
Wood Bat Reels Replacement Tines
Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” ( 114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine.
Air cylinder mounting brackets available for Yetter row cleaners.
Yetter Twister closing wheels have a twisted-spike design that breaks up sidewall compaction and is effective in a wide range of soil conditions. Whatever your tillage practice or soil type, Twister closing wheels seal the seed trench, ensuring seed-to-soil contact for optimal seed germination.
Products
15" SPIKED CLOSING WHEEL, BOLT-ON, 5/8", M16, LH
Single 15" left hand spiked closing wheel for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
Air Filter Blaster with 6" rotor included.
AUGER TROUGH LINER, CIH 800, 4R-30"
4 Row Auger Trough Liner for Case-IH 800 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH 900/1000, 4R-30"
4 Row Auger Trough Liner for Case-IH 900, 1000 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, 6R-30"
6 Row Auger Trough Liner for Case-IH 2600, 4200 and 4400 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, NH, 4R-30"
4 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series; New Holland 96C, 96D, 98C and 98D series cornheads with 30" rows.
AUGER TROUGH LINER, JD 200, 900, 30', (58" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 30' and 58" throat opening. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 600, 6R-30"
6 Row Auger Trough Liner for John Deere 600 series cornhead with 30" rows.
John Deere 620F Auger Trough Liner. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 90/40, 4R-30"
4 Row Auger Trough Liner for John Deere 90/40 series cornhead with 30" rows.
AUGER TROUGH LINER, NH 996, 4R-30"
4 Row Auger Trough Liner for New Holland 996 series cornheads with 30" rows.
B4 ST is a seed treatment that is applied at 1oz/cwt. Contains 1 x 2.5 gallon jug. This product is a biological. Any returns require pre-approval due to shelf life.
Botanical Antimicrobial Cleaner (BAC), cleaner, is used for cleaning any agricultural and veterinary locations, food-use sites, commercial businesses and residencies. Contains 1 x 32 oz sprayer bottle.
Belt Meter for John Deere.
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 1 x 4oz bottle.
Keeton Kinze bracket for KTN115014, KTN125014 and KTN126011.
Replacement Keeton Universal Bracket for KTN115011, KTN125012 and KTN126008.
C125 FLOATING 13" SPIKED ROW CLEANER
C125 Floating 13 inch row cleaner cleaner is shown with optional treader wheels. Wheels can be operated in intersected (for no-till conditions), offset (for freshly worked soil or loose sandy conditions. Suitable for no-till. May be used behind certain forward mounted fertilizer openers) or retracted (if overall length is too long) position. Mounting bracket sold separately.
CIH V-CLOSING WHEEL KIT, BOLT-ON, 5/8"
Will fit Case-IH 800, 900 and 1200 series with original single press wheel to convert to v-closing wheels.
CLEAN SWEEP KIT, 12 ROW, W/ COMPRESSOR
Precision Planting Manual Clean Sweep air control kit for 12 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 16 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 16 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 23 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 23 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 24 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 24 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 31 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 31 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 32 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 32 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 36 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 36 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 48 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 48 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 54 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 48 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 6 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 6 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 8 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 8 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLOSING WHEEL, CAST IRON, ROLL PIN
Cast Iron closing wheel for a John Deere 7000, 7100 and Kinze 1993 & prior planters where closing wheels are attached with roll pin. Water pump style bearing. Price is each.
CLOSING WHEEL, FINGER-TILL, BOLT-ON, 5/8", M16
Finger-Till closing wheel for John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels. Includes the dust cap.
CLOSING WHEEL, YETTER TWISTER, POLY, BOLT-ON, 5/8", M16
Yetter Twister poly closing wheel for John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
CRP-10, 2-1/2" NO WINGS, LANDOLL WEATHERPROOFER, 2200, 2300, 1-1/8" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/8" shanks. Will fit Landoll WeatherProofer 2200, 2300 series.
CRP-24, 2-1/2" NO WINGS, M&W, SUNFLOWER, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit M&W Earthmaster 900, 1100, 1400, 1700, 1800, 2200, 2500 series; Sunflower 4213, 4233, 4412, 4511, 4530 series.
CRP-44, 2-1/2" NO WINGS, GREAT PLAINS, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series.
CRP-6, 2-1/2" NO WINGS, CASE-IH, DMI, KRAUSE DOMINATOR, SALFORD, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit 500, 527, 527B, 530, 530B, 690, 730, 870, 875 MRX 690, 930; Glencoe/White Coulter chisels CC4450 and White 435 and 445 with Deep Till Shanks; Kuhn/Krause Dominator; New Holland front shanks ST770, ST775, ST720, ST740; Salford 9700, 9800 series.
CRP-6B, 2-1/2" NO WINGS, BRILLION, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Brillion Land Commander 1 and 2.
CRP-77, 7" WING, BLU-JET, SALFORD, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit Blu Jet Subtillers, I, II and III; Salford 9200-series with straight shanks.
CRP-8, 2-1/2" NO WINGS, BAKER, JD, KRAUSE, P-K, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Baker/Laney inline and v-rippers; Bigham Brothers MegaTill Max Subsoilers; John Deere 510, 512, 955, 2700, 2720, 2730 Disc Rippers and 913, 915 V-rippers; Krause TL3000 & 4880 Land Builder; Missouri Machine/ Rome RVR and RSR Series Rippers.
CRP-9R, 2-1/2" NO WINGS, RAWSON (UNVERFERTH) ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit Rawson (Unverferth) Zonebuilder.
DEPTH BLADE (FILLER PLATE), SCW, 10.5"
10.5 " Filler blade for use with 12.5" razor or 13" spiked wheels in heavy residue or cover crops.
DISC ASSEMBLY, 15"-11 NOTCH, JD, KINZE, WHITE
Seed opener for White 6000-8000 series, all John Deere except XP row units and Kinze. V-Slice Inserts must always be used when using notched discs.
DISC ASSEMBLY, 204B, 14" X 3.5MM LEADING, FDN
Disc opener LEADING assembly, 14" diameter x 3.5mm thick. Includes blade, single 204 bearing and hub. Will fit 800, 900, 1200 series planters; 5400, 5500 soybean special drills.
DISC ASSEMBLY, 204B, 15" X 3.5MM, CAST HUB, FDN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, double 204 bearing, cast hub and dust cap. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5.
DISC ASSEMBLY, SMOOTH, GP, 13.5"
Drill disc assembly, Great Plains. All 13-1/2 double disc opener drills. Replaces Great Plains 107-130S, 107-133S, 107-135S, 107-138S.
This special blend of 80% talc and 20% graphite improves seed loading and seed release – and that improves seed spacing. eFlow improves the flow of seed from the hopper to the meter. In the meter, eFlow ensures that seeds release consistently once the vac is shut off and seeds drop to the seed tube. The addition of graphite, especially in smaller seeds, helps seeds slide off the disk like clockwork.
HEDGE TRIMMER, KM120-L, LIGHT DUTY, 4'
Lightweight design hedge trimmer for 47" working width
HYDRA-MAXX, JD 1690, 1860, 1890, 1895, 1990, 30'
Down Pressure System for 30' John Deere 1690, 1860, 1890, 1895, 1990.
KEETON, QUICK ATTACH, JD, LP TAIL
Keeton Seed Firmer, Low Profile Tail, Quick Attach. Mounts to seed disc opener shafts and lower seed tube pin. Fits John Deere MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro, MaxEmerge XP, MaxEmerge XP Pro and MaxEmerge 5 row units.
KNIFE ASSEMBLY & KNFHD, JD 218, 918, 7SPI
OEM 18-foot sectional knife assembly with coarse tooth sections (7-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 25', 14SPI
OEM 25-foot sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
OEM 20-foot sectional knife assembly with coarse tooth sections (7-SPI) for John Deere 620 auger platform with 4" cutting system. Hardware is included. Does NOT include the RSP002559 knifehead. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, JD 630F, 630FD, 730FD, 930D, 14SPI
OEM 30-foot sectional knife assembly with fine tooth sections (14-SPI) for John Deere 630 auger platform, 630FD and 730FD flex draper single drive platform and 930 draper platform with 4" cutting system. Hardware and knife connector kits are included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, JD 630F, 630FD, 730FD, 930D, 7SPI
OEM 30-foot sectional knife assembly with coarse tooth sections (7SPI) for John Deere 630 auger platform, 630FD and 730FD flex draper single drive platform and 930 draper platform with 4" cutting system. Hardware and knife connector kits are included. Coarse tooth sections are recommended for soybeans and alfalfa.
METER & SEED TUBE, JD 7000, KZ 2000
Precision Meter and Bullseye Seed Tube for John Deere 7000 and 7100 series. Also fits Kinze 2000 series. This kit will save you approximately $8.00 per row.
METER & SEED TUBE, JD 7200, 1700
Precision Meter and Bullseye Seed Tube for John Deere 7200, 7300 and 1700 series. This kit will save you approximately $8.00 per row.
Precision Meter and Bullseye Seed Tube for Kinze 3000 series. This kit will save you approximately $8.00 per row.
METER & WAVE VISION, JD 7000, KZ 2000
Precision Meter and Wave Vision seed tube for John Deere 7000 and 7100. Also will work for Kinze 2000 series. This kit will save you approximately $13.00 per row.
MOJO WIRE KIT, BRACKET MOUNT, DRY
Fits bracket mounted Keeton Seed Firmer with dry tail only, to add more down pressure. Supplies up to 3 times more pressure than the standard Keeton. Mojo Wire is NOT recommended for the Keeton Low Profile (LP) tail, as it will wear them out extremely fast. Will NOT fit the Flo-Rite seed firmer.
MOJO WIRE KIT, BRACKET MOUNT, LIQUID
Fits bracket mounted Keeton Seed Firmer with liquid tail only, to add more down pressure. Supplies up to 3 times more pressure than the standard Keeton. Mojo Wire is NOT recommended for the Keeton Low Profile (LP) tail, as it will wear them out extremely fast. Will NOT fit the Flo-Rite seed firmer.
MOJO WIRE KIT, SEED TUBE MOUNT
Fits seed tube mounted Keeton Seed firmer to add more down pressure. Supplies up to 3 times more pressure than the standard Keeton. Will NOT fit the Flo-Rite seed firmer.
Flat Radura disc mower blade for Gehl, John Deere, Kuhn and New Holland. Sold in boxes of 25.
Flat Radura disc mower blade for Kuhn. Sold in boxes of 25.
Left hand 10 degree Radura disc mower blade for Case-IH, Challenger, Gehl, Hesston, John Deere, Kuhn, Massey Ferguson, New Holland and New Idea. Sold in boxes of 25.
Left hand 11 degree bottom bevel Radura disc mower blade for AGCO, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Left Hand 11 degree Radura disc mower blade for Greenland, John Deere, Kuhn, Massey Ferguson, New Holland and PZ Zweegers. Sold in boxes of 25.
Left hand 7 degree Radura disc mower blade for Krone. Sold in boxes of 25.
Left hand 18 degree bottom bevel Radura disc mower blade for AGCO, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Left hand 11 degree Radura disc mower blade for Bush Hog, Case-IH, Fella, Gehl, Greenland, Lely, Massey Ferguson, New Idea and Vicon. Sold in boxes of 25.
Left hand Radura disc mower blade for AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Left hand 14 degree Radura disc mower blade for Case-IH and New Holland. Sold in boxes of 25.
Left hand 11 degree top bevel Radura disc mower blade for Case-IH, Challenger, Gehl, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Left hand 10 degree Radura disc mower blade for Gehl, John Deere, Kuhn and New Holland. Sold in boxes of 25.
Left hand 7 degree Radura disc mower blade for Case-IH and New Holland. Sold in boxes of 25.
Left hand 18 degree Radura disc mower blade for Bush Hog, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Left hand 10 degree Radura disc mower blade for Gehl, John Deere, Kuhn, New Holland and Sitrex. Sold in boxes of 25.
Left hand 18 degree top bevel Radura disc mower blade for AGCO, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Left hand 18 degree Radura disc mower blade for John Deere. Sold in boxes of 25.
Right hand 10 degree Radura disc mower blade for Case-IH, Challenger, Gehl, Hesston, John Deere, Kuhn, Massey Ferguson, New Holland and New Idea. Sold in boxes of 25.
Right hand 11 degree bottom bevel Radura disc mower blade for AGCO, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Right hand 18 degree bottom bevel Radura disc mower blade for AGCO, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Right hand 7 degree Radura disc mower blade for Krone. Sold in boxes of 25.
Right hand 7 degree Radura disc mower blade for Case-IH and New Holland. Sold in boxes of 25.
Right hand 10 degree Radura disc mower blade for Gehl, John Deere, Kuhn and New Holland. Sold in boxes of 25.
Right hand 14 degree Radura disc mower blade for Case-IH and New Holland. Sold in boxes of 25.
Right hand 11 degree Radura disc mower blade for Bush Hog, Case-IH, Fella, Gehl, Greenland, Lely, Massey Ferguson, New Idea and Vicon. Sold in boxes of 25.
Right hand 10 degree Radura disc mower blade for Gehl, John Deere, Kuhn, New Holland and Sitrex. Sold in boxes of 25.
Right hand 18 degree Radura disc mower blade for Bush Hog, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Right hand Radura disc mower blade for AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Right hand 18 degree top bevel Radura disc mower blade for AGCO, Case-IH, Challenger, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
Right hand 18 degree Radura disc mower blade for John Deere. Sold in boxes of 25.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16, ROLL PIN
MudSmith wheel with 4.5" x 16" standard tire with water pump (roll pin) style bearing. Will fit John Deere, Kinze, Monosem and White planters with a water pump (roll pin) bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
NEEDHAM AG V8 FIRMING WHEEL, URETHANE, JD DRILL
Fits John Deere 50, 60 and 90 Series drills and air seeders, plus Case-IH SDX air seeders. Includes: Instructions, mounting bolt, lock nut and washer.
NORSEMAN GAUGE WHEEL ARM KIT, JD XP, ME5, EE
Norseman Gauge Wheel Arm kit for John Deere MaxEmerge XP, XP Pro, MaxEmerge 5, ExactEmerge, John Deere 1530, 1535 drills with XP row units and Norseman planters. Includes 2 arms and hardware. Rotary disc scrapers are NOT compatible with Norseman arms. Will NOT fit Harvest International Laser Pro row units.
NORSEMAN GAUGE WHEEL ARM KIT, KINZE 3000, 4000
Norseman Gauge Wheel Arm kit for Kinze 3000 and 4000 series planters. Includes two arms and hardware.
OEM GUARD, 3-PT, JD 600F, 600FD, 700FD, LSL
OEM replacement guard, 3-point, long-short-long, 4" standard blunt point, double hardened. Will fit John Deere 600 series flex and 600FD, 700FD flex draper.
OEM GUARD, 3-PT, JD 600F, 600FD, 700FD, SLS
OEM replacement guard, 3-point, short-long-short, 4" standard blunt point, double hardened. Will fit John Deere 600 series flex and 600FD, 700FD flex draper.
OEM replacement knifehead for Case-IH 1010 and 1020 series headers with 3-inch cutting system.
OEM SECTION, AGCO, 7SPI, BOX OF 25
Box of 25, AGCO coarse section, 7 serrations per inch. Fits AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250 and Challenger. Replaces AGCO 71135135 riveted section and 71348175 bolt-on section.
OUTBACK WRAP, HOSE MARKER, 4-PAIRS, GREEN, BLUE, BROWN, BLACK
Outback Wrap hydraulic hose markers make it easy to identify hydraulic hoses and connect them to farming equipment. Outback Wrap can be used on any hydraulic hose or on any pipe that connects equipment using hydraulics. This 4-Pair package contains (4) pairs that fit 1/4" to 1-1/2" hoses. Contains a pair of green, blue, brown and black markers.
P/D KIT, CIH 1020, GREASE WB, CIH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a greaseable wobble box. This kit requires a serial number JJC0215000 and lower. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, CIH 1020, GREASE WB, SCH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a greaseable wobble box. This kit requires a serial number JJC0215000 and lower. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, JD 200,900 FLEX, W/230 1/2", JD
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 1/2" clevis. Also available for JD Flex 9000 series with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/230 1/2", SCH
SCH Pro-Drive Kit available for JD Flex 4420, 6620 & 7720 through 1985 with 1/2" clevis. Also available for John Deere 9000 series with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, JD 600F, 600R, PKG OF 100
John Deere 600F/600R poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, MACDON, SINGLE
MacDon FM100 Float Module poly finger only. Guide kit and hardware NOT included.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 1/4", (2012)
30' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 1/4", (2015)
30' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 1/4",(2013/2014)
30' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID, 25', PREDRILLED, 1/4"
25 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, MACDON 974 (2005 & before), 21', PRE-DRILLED 3/8"
21 Ft. MacDon 974 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 13', PRE-DRILLED 1/4"
13 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200-900, 13', PRE-DRILLED 1/4"
13 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, JD 600FD (2012-2015), CENTER SKID SHOE, 5.5 X 9.75 X 1/4
John Deere 600F, 600FD (2013-2014) Center Skid Shoe - 5.5" x 9.75" - Yellow - 1/4"- Predrilled.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, CORN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 12F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series. Recommended for 30" or greater row spacing.
V-crown ripper “Spring” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Narrow point is 2” wide and 14” long for deep tillage.
ROW CLEANER, TWIN ROW, LH, RAZOR WHEELS
Martin LH Twin Row Cleaner with razor wheels. Optional side treader wheel or depth blade/filler plate sold separately. Right hand sold separately. Will fit Great Plains, Harvest International, John Deere and Kinze.
ROW CLEANER, WA1360, RAZOR WHEELS, HI, JD, KINZE, WHITE, W/O NTC
WA1360 floating row cleaner with razor wheels. Will fit Harvest International Laser Pro; John Deere 7000, 7100, 7200, 7300, 1700, DB series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series. Side Treader wheels sold separately. NOTE: Only compatible when NOT using a no-till coulter.
ROW CLEANER, WA1360, SPIKED WHEELS
WA1360 Floating 13 inch 4-Bolt row cleaner is shown with optional treader wheels and cam adjuster. Mounting bracket sold separately.
ROW CLEANER, WA1360, SPIKED WHEELS, HI, JD, KINZE, WHITE, W/O NTC
WA1360 floating row cleaner with standard spiked wheels. Will fit Harvest International Laser Pro; John Deere 7000, 7100, 7200, 7300, 1700, DB series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series. Side Treader wheels sold separately. NOTE: Only compatible when NOT using a no-till coulter.
SCH 12MM 2-PT GUARD, (LONG II)
SCH EasyCut II long 12mm 2-point guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 2-PT GUARD, (SHORT II)
SCH EasyCut II short 12mm 2-point guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH KIT, NH FLEX 972, 973, 73C, 74C 25'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KNFHD, CAT, CLAAS, LEXION, MF, 20' & >
Fits SCH EasyCut system installed on Caterpillar Flex Head, Claas 8450, 8460, Lexion F30, F530 and Massey Ferguson 8450, 8460 on platforms 20' and larger. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 3020, NH 740CF, LH
Fits SCH EasyCut system installed on Case-IH 3020 and New Holland 740CF, LH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on John Deere 200 & 900 series platforms. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, NH 972, 973, 73C, 74C; CIH 2020 FLEX, LH
Fits SCH EasyCut system installed on Case-IH 2020 (serial number up to CBJ021300; all HAJ), all New Holland 970, 972, 973, 974 and New Holland 74C (serial number up to PNL018300; all HAJ), left hand knifehead. Measures 4-3/4" from center of first full section to center of drive bolt. Bearings are not included. Knifehead hardware package (SCP083601) not included.
SCH P/D KNFHD, CIH 1010, 1020, W/SCH KNIFE
Knifehead available for Case-IH flex and rigid platforms. This knifehead is used for Pro-Drives with SCH Cutter Bar.
SCH PARTS PACKAGE, ROLLER GUIDES
SCH Parts Bag for SCH cutting system with roller guides. Includes open top guard, standard guards, three-point guard (if required), top and bottom rollers, box of 25 sections with hardware and an extra splice kit. NOTE: Please include model and width of platform.
Designed for edible beans, lentils, peas and downed soybeans. Fits all SCH guards and most forged guards; the difference being the type of bolt used to mount it on the guard. For row crops, install one on each side of row, 9" apart. For solid or drilled crops, install one every 12" apart. NOTE: Hardware kit is not included. It is required for installation. It is determined by make and model of guard. The hardware kit is purchased separately.
Box of 25 SCH Fine Sections, 11 serrations per inch, for SCH Knife. Fine is recommended for wheat and grasses.
SCH 2 hole, 4mm wear plate. Brown in color.
The Model 740 is a designed to fit 2 inch receiver tubes, includes pin. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCRAPER KIT, JD 1590, 1890, 1895, 1990, RH
Fits John Deere 1590, 1890, 1895 and 1990 drills. Installs on the depth wheel side. Each kit includes: 1 RH pre-assembled scraper and bracket.
SEED DISK, ESET, SPECIALTY, .100"
Replacement 30-hole eSet seed disk for speciality crops.
Designed for use in 30” row crops when leaving high cut stubble (ex. corn & sorghum - falls in between stubble without tipping over). Also used with plot and research combines. An optional Air Separator, BPS200100, is available for cleaning the sample within seconds. It can also be used to quickly cool down heated grain from the dryer so you can get an accurate moisture reading.
STALK STOMPERS, G4, AGCO, 2R, W/ TOOLBAR, 12" SHOE
2 Row - AGCO (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Capello Diamant (2 Row - Capello Diamant (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CAPELLO QUASAR, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Capello Quasar (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
2 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
2 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 2R, W/ TOOLBAR, 12" SHOE (6 ROW CORNHEAD)
2 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 2R, W/ TOOLBAR, 12" SHOE (8 ROW CORNHEAD)
2 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. NOTE: Series II 6 row heads require MYW041958 offset brackets.
STALK STOMPERS, G4, FANTINI, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Fantini (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Harvestec 5000 and 6000 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar NOT required for 2-row and 4-row applications. It will mount directly to the header brackets.
STALK STOMPERS, G4, JD 40/90, 2R, W/ TOOLBAR, 12" SHOE
2 Row Kit (2 Outer Rows) - John Deere 40/90 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 2R, W/ TOOLBAR, 12" SHOE
2 Row - John Deere 600/700 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 2R, W/ TOOLBAR, 12" SHOE
2 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 2R, W/ TOOLBAR, 12" SHOE
2 Row - Lexion (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, MACDON C-SERIES, 2R, W/O TOOLBAR, 12" SHOE
2 Row - MacDon C-Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar NOT required for 2-row and 4-row applications. It will mount directly to the header brackets.
The Smart Switch will automatically turn on/off the fans according to your settings; or you can manually turn the fans on/off ANYTIME and from ANYWHERE. In real time, you can read the current temperature/humidity at your bin site, change your settings, or simply monitor the current conditions. Used for natural air drying and to maintain market value while storing. Other applications include livestock barn fans, pivots and hay storage. You will need a Smart Phone and WiFi at the bin site. You can purchase a hotspot from your cell phone provider for WiFi. A free downloadable app from STEPS GMS is available to monitor it from anywhere.
Perfect Alignment Every Time. Save Time and Save Steps. 90 Decibel Alarm and LED light signals your exact stopping position. Can be permanently mounted or mounts on a tripod for portability.
TIRE, GAUGE WHEEL, STANDARD, NON-XP
Gauge Wheel Tire, 4.5" x 16" standard profile. Will fit John Deere planters MaxEmerge, MaxEmerge2, MaxEmerge Plus and Pro row units; John Deere Drills 750, 1560, 1850, 1860; 1530, 1535 with MaxEmergePlus row units; early 1590, 1690, 1835, 1890, 1895, 1990; Kinze; White 5100, 5700, 6000, 8000, 9000.
TOOLBOX, 30 X 15 X 18, ALUMINUM
Trail-Jet Fertilizer Opener for a Case-IH 1200 series. Will not fit Case-IH 1220. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, JD 7000, 7100, KINZE 2000 SERIES
Trail Jet Fertilizer Opener for a John Deere 7000 and John Deere 7100 series. Will also fit Kinze 2000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
Trail-Jet Fertilizer Opener for a White 6000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-CLOSING WHEEL BRACKET, BOLT-ON
Bracket kit, to convert planter to v-closing wheels. Will fit White 5100 planters with original press wheel. Will only fit White 6000 series planter if closing wheel H-bracket arm is straight and the down pressure springs are on the inside.
VALION W/ LIQUID, JD ME, KINZE 2000, OVERSIZE
Valion seed tube guard with liquid for Kinze 2000 series and all John Deere except XP row units with holes drilled out to 3/8".
VALION W/ LIQUID, JD ME2, ME+, PRO
Valion seed tube guard with liquid for John Deere MaxEmerge 2, MaxEmerge Plus and MaxEmerge Pro.
VALION W/ LIQUID, JD ME2, ME+, PRO, OVERSIZE
Valion seed tube guard with liquid for John Deere MaxEmerge 2, MaxEmerge Plus and MaxEmerge Pro row units with holes drilled out to 3/8".
VALION W/ LIQUID, JD XP, XP PRO, ME5
Valion seed tube guard with liquid for John Deere XP, XP Pro and MaxEmerge 5 row units. Will NOT fit John Deere ExactEmerge planters. Includes Valion seed (EXP100450), tube holder (EXP100454) and tubing (EXP111228).
Valion seed tube guard for Kinze 2000 series and all John Deere except XP row units.
VALION, JD ME, KINZE 2000, OVERSIZE
Valion seed tube guard with holes drilled out to 3/8" for Kinze 2000 series and all John Deere except XP row units.
Valion seed tube guard for John Deere XP, XP Pro and MaxEmerge 5 row units. Will NOT fit John Deere ExactEmerge planters.
WA1332 PIN ADJUST 13" SPIKED ROW CLEANER
Pin-adjust row cleaner, 1-½” stem, 13” wheels. Wheels can run in intersected (for use in firm soil conditions and severe residue), offset (for moderate residue and freshly tilled soil) or retracted (for behind certain frame mounted coulters) position. Mounting Bracket sold separately.
WA1334 PIN ADJUST 13" SPIKED ROW CLEANER, 2"
Pin-adjust row cleaner, 2” stem for Case-IH planters, 13” wheels. Mounting Bracket sold separately.
ATV Mount 5 ft. (pump fed) (sprayer not included.)
This is our 5 ft. sprayer boom kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
TOP CROP 5 ft. kit (pump fed) Build your own boom. Comes with manifold and tubing (Requires a sprayer tank/pump with 1.4 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
13" SPIKED CLOSING WHEELS, BOLT-ON, 5/8", M16
13" spiked closing wheels for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
13" SPIKED CLOSING WHEELS, BOLT-ON, M17
13" spiked closing wheels for John Deere planters with a 16.95 threaded spindle on closing wheel frame.
13" SPIKED CLOSING WHEELS, ROLL PIN
13" spiked closing wheels for John Deere, Kinze and White planters where closing wheels are attached with roll pin.
15" SPIKED CLOSING WHEEL, BOLT-ON, 5/8", M16, RH
Single 15" right hand spiked closing wheel for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
3" rotor head for filters with 3" - 4-1/2" inside diameter.
AUGER TROUGH LINER, CIH 800, 6R-30"
6 Row Auger Trough Liner for Case-IH 800 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH 900/1000, 6R-30"
6 Row Auger Trough Liner for Case-IH 900, 6 Row Auger Trough Liner for Case-IH 900, 1000 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, 8R-30"
8 Row Auger Trough Liner for Case-IH 2600, 4200 and 4400 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, NH, 6R-30"
6 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series; New Holland 96C, 96D, 98C and 98D series cornheads with 30" rows.
AUGER TROUGH LINER, JD 200, 900, 30', (46" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 30' and 46" throat opening. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 600, 8R-30"
8 Row Auger Trough Liner for John Deere 600 series cornhead with 30" rows.
John Deere 622F Auger Trough Liner. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 90/40, 6R-30"
6 Row Auger Trough Liner for John Deere 90/40 series cornhead with 30" rows.
AUGER TROUGH LINER, NH 996, 6R-30"
6 Row Auger Trough Liner for New Holland 996 series cornheads with 30" rows.
B4 ST is a seed treatment that is applied at 1oz/cwt. One case contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
Botanical Antimicrobial Cleaner (BAC), cleaner, is used for cleaning any agricultural and veterinary locations, food-use sites, commercial businesses and residencies. Contains 1 x 128 oz container.
Bearing for SCP016326 knifehead.
BELT METER, GREAT PLAINS, ANGLED TOP
Belt Meter for later Great Plains, Angled Top.
BIG SHOT MAXIM, 4 OZ, CASE OF 60
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 60 x 4oz bottles.
C125 BRACKET, CIH 800-1300, 28"
Will fit Case-IH 800, 900, 1200 and 1300 series planters with a no-till coulter to mount the C125 floating row cleaner assembly. Requires 28" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
CLEAN SWEEP KIT, 12 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 12 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 16 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 16 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 23 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 23 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 24 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 24 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 31 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 31 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 32 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 32 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 36 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 36 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 48 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 48 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 54 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 54 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 6 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 6 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
CLEAN SWEEP KIT, 8 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 8 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
CLOSING WHEEL, FINGER-TILL, M17 THREADED STUD BOLT
Finger-Till closing wheel John Deere planters with a 16.95 threaded spindle on closing wheel frame.
CRP-1, 7" WING, BAKER, DAMMER-DIKER, JD, KRAUSE, LANEY, P-K, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Baker/Laney inline and v-rippers; Bigham Brothers MegaTill Max Subsoilers; John Deere 510, 512, 955, 2700, 2720, 2730 Disc Rippers and 913, 915 V-rippers; Krause TL3000 & 4880 Land Builder; Missouri Machine/ Rome RVR and RSR Series Rippers.
CRP-13, 2-1/2" NO WINGS, BRILLION, 1" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1" shanks. Will fit subsoilers with 1" shank. Will NOT fit Brillion Land Commander.
CRP-17, 2-1/2" NO WINGS, CASE-IH, DMI, 1-1/2" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/2" shanks. Will fit 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.
CRP-26, 2-1/2" NO WINGS, SUNFLOWER, WILRICH, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Sunflower 4610, 4630, 4710, 4730 series; Wilrich SoilPro, 657 DCR/ripper.
CRP-44-7, 7" WING, GREAT PLAINS, 1-1/4" SHANK
Conservation ripper point with 7"wings. Available for 1-1/4" shanks. Will fit Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series.
CRP-50, 2-1/2" NO WINGS, LANDOLL WEATHERPROOFER, 2400, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Landoll WeatherProofer 2400 series.
CRP-710, 10" WING, BLU-JET, SALFORD, 1-1/2" SHANK
Conservation ripper point with 10" wings. Available for 1-1/2" shanks. Will fit Blu Jet Subtillers, I, II and III; Salford 9200-series with straight shanks.
CRP-9RW, 7" WING, RAWSON (UNVERFERTH) ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 7" wings. Available for 3/4" shanks. Will fit Rawson (Unverferth) Zonebuilder.
DISC ASSEMBLY, 15"-15 NOTCH, JD, KINZE, WHITE
Seed opener for White 6000-8000 series, all John Deere except XP row units and Kinze. V-Slice Inserts must always be used when using notched discs. The 15-notch disc should be the lead disc.
DISC ASSEMBLY, 204B, 14" X 3.5MM TRAILING, FDN
Disc opener TRAILING assembly, 14" diameter x 3.5mm thick. Includes blade, single 204 bearing and hub. Will fit 800, 900, 1200 series planters; 5400, 5500 soybean special drills.
DISC ASSEMBLY, 205B, 15" X 3.5MM, FDN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, double 205 bearing, hub and plastic dust cap. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5.
DISC ASSEMBLY, SMOOTH, GP, 13.5", BOX OF 2
Drill disc assembly, Great Plains. All 13-1/2 double disc opener drills. Replaces Great Plains 107-130S, 107-133S, 107-135S, 107-138S.
A measuring lid that fits the 8-lb. eFlow jug. The lid meters 1/8 cup of eFlow with each turn of the handle; two turns equals 1/4 cup delivered directly into the seed hopper.
ESET KIT, MAXEMERGE PRO, XP PRO
Fits John Deere with mini seed hopper; Pro Series and Pro Series XP row units. The Precision ProFlo mini hopper maximizes the eSet performance by eliminating the 90-degree bends that slow seed delivery. Includes 30-cell seed corn disk, liner (baffle), singulator, brushes, extractor, ProFlo mini hopper, vented hopper lid and set-up tool. Meter housing is NOT included. Some planters will require additional components to complete installation of the ProFlow Hopper. Please click on the product to learn if your planter will require additional components.
Top Chaffer. Four panels with two adjusters. Long tooth (7/8") with a row to row spacing of 33 mm (1-1/8"). Frame size is 51.89" x 56.93". (Photo is not actual chaffer) Replaces OEM Part#-87109828.
GATEWAY, TC, JD 9600, 9610, 9650, 9660, 33LT, 2P
Top Chaffer. Requires two chaffers. Two panels with one adjuster. Long tooth (7/8") with a row to row spacing of 33 mm (1-1/8"). Frame size is 31.10" x 35.71". (Photo is not actual chaffer) Replaces OEM Part#- AH132784/AH149552/AH1495550.
HEDGE TRIMMER, KM150-L, LIGHT DUTY, 5'
Lightweight design hedge trimmer for 59" working width
KEETON, QUICK ATTACH, JD, STANDARD TAIL
Keeton Seed Firmer, Standard Tail with single liquid tube, Quick Attach. Mounts to seed disc opener shafts and lower seed tube pin. Fits John Deere MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro, MaxEmerge XP, MaxEmerge XP Pro and MaxEmerge 5 row units.
KNIFE ASSEMBLY & KNFHD, JD 218, 918, 11SPI
OEM 18-foot sectional knife assembly with fine tooth sections (11-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 25', 7SPI
OEM 25-foot sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 620F, 14SPI
OEM 20-foot sectional knife assembly with fine tooth sections (14-SPI) for John Deere 620 auger platform with 4" cutting system. Hardware is included. Does NOT include the RSP002559 knifehead. Fine tooth sections are recommended for wheat and grasses.
METER & WAVE VISION, JD 7200, 1700
Precision Meter and Wave Vision seed tube for John Deere 7200 and 1700 series. This kit will save you approximately $13.00 per row.
Precision Meter and Wave Vision seed tube for Kinze 3000 series. This kit will save you approximately $13.00 per row.
Fits all 2-piece drill Keetons including Great Plains narrow Keetons to add more down pressure. Supplies up to 3 times more pressure than the standard Keeton. Will NOT fit the older 1-piece drill Keetons; Case-IH Precision 500; New Holland P2080, P2085 disk drills. Will NOT fit Flo-Rite seed firmer.
MOUNT, WA1345, WA1360, JD 7200, 1700 SERIES, W/O NTC
Will fit JD7200, 7300 and all JD 1700 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly. Requires 19" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MOUNT, WA1360, KINZE 4900, W/NTC
Will fit Kinze 4900 series with OEM double arm no-till coulters to mount the WA1360 floating row cleaner assembly. Requires 22" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
Right Hand 11 degree Radura disc mower blade for Greenland, John Deere, Kuhn, Massey Ferguson, New Holland and PZ Zweegers. Sold in boxes of 25.
Right hand 11 degree top bevel Radura disc mower blade for Case-IH, Challenger, Gehl, Hesston, Massey Ferguson and New Idea. Sold in boxes of 25.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16 RID, ROLL PIN
MudSmith wheel with 4.5" x 16" reduced inner diameter (RID) tire with water pump (roll pin) style bearing. Will fit John Deere, Kinze, Monosem and White planters with a water pump (roll pin) bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots.
OEM replacement knifehead (AH220051) for John Deere 600 flex series headers with 4" cutting system. Does not include mounting hardware; must order RSP080080. Does NOT fit John Deere 600 series flex draper platforms.
OEM SECTION, AGCO, 11SPI, BOX OF 25
Box of 25, AGCO fine section, 11 serrations per inch. Fits AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250 and Challenger. Replaces AGCO 71135135 riveted section and 71348175 bolt-on section.
P/D KIT, CIH 1020, EARLY OIL WB, CIH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number between JJC0215001 and JJC0323604. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, CIH 1020, EARLY OIL WB, SCH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number between JJC0215001 and JJC0323604. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, JD 200,900 FLEX, W/240 1/2", JD
SCH Pro-Drive Kit available for JD Flex 6620 and 7720 after 1985 with 1/2" clevis. Also available for JD Flex 8820 with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/240 1/2", SCH
SCH Pro-Drive Kit available for JD Flex 6620 and 7720 after 1985 with 1/2" clevis. Also available for JD Flex 8820 with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, 1010, 1020, 2142, 2152, 2162; MACDON CA20, CA25; NH 82C, 83C, 86C, PKG OF 100
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH 3020, 3162, NH 740CF, PKG OF 100
Case-IH 3020, 3162 and New Holland 740CF poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, PKG OF 100
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH2020, NH 74C, PKG OF 100
Case-IH 2020 and NH 74C poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 200, 900, PKG OF 100
John Deere 200/900 poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600FD, 600D, 700FD, 700D, RDF, PKG OF 100
John Deere 600FD, 600D, 700FD, 700D, RDF series single poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, MACDON, PKG OF 24
MacDon FM100 Float Module poly finger only, package of 24. Guide kit and hardware NOT included.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 3/8", (2012)
30' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 3/8", (2013/2014)
30' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 3/8", (2015)
30' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 30', PREDRILLED, 1/4"
30 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, MACDON 974 (2005 & before), 25', PRE-DRILLED 3/8"
25 Ft. MacDon 974 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 15', PRE-DRILLED 1/4"
15 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 15', PRE-DRILLED, 3/8"
15 Ft. Case-IH 1020 Skid Shoe Set - 3/8 Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 13', PRE-DRILLED, 3/8"
13 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F; JD 600FD (2012-2015), CENTER SKID SHOE, 5.5 X 9.75 X 3/8
John Deere 600F, 600FD (2013-2014) Center Skid Shoe - 5.5" x 9.75" - Yellow - 3/8"- Predrilled.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 6F, CORN
For 15-20" narrow row corn. The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 6F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series. Recommended for 15-20" row spacing.
One (1) piece of reflective tape 8" long
V-crown ripper "Fall" point, Blu-Jet Sub-Tiller II with 1-1/2" shank. Wider point is 2-7/8" wide and 15-1/2" long for deeper tillage and more shattering action.
ROW CLEANER, TWIN ROW, RH, RAZOR WHEELS
Martin RH Twin Row Cleaner with razor wheels. Optional side treader wheel or depth blade/filler plate sold separately. Left hand sold separately. Will fit Great Plains, Harvest International, John Deere and Kinze.
ROW CLEANER, WA1360, RAZOR WHEELS, JD 7200, 7300, 1700, DB, W/ NTC
WA1360 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit John Deere 7200, 7300, 1700, DB series with a no-till coulter.
ROW CLEANER, WA1360, RAZOR WHEELS, KINZE 2000, 3000, W/ NTC
WA1360 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit Kinze 2000 and 3000 series with OEM double arm no-till coulters. Will NOT fit Kinze 4900.
ROW CLEANER, WA1360, RAZOR WHEELS, KINZE 4900, W/ NTC
WA1360 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will only fit Kinze 4900 series with OEM double arm no-till coulter.
ROW CLEANER, WA1360, SPIKED WHEELS, JD 7200, 7300, 1700, DB, W/ NTC
WA1360 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit John Deere 7200, 7300, 1700, DB series with a no-till coulter.
ROW CLEANER, WA1360, SPIKED WHEELS, KINZE 2000, 3000, W/ NTC
WA1360 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit Kinze 2000 and 3000 series with OEM double arm no-till coulters. Will NOT fit Kinze 4900.
ROW CLEANER, WA1360, SPIKED WHEELS, KINZE 4900, W/ NTC
WA1360 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will only fit Kinze 4900 series with OEM double arm no-till coulter.
SCH 14MM 2-PT GUARD, (LONG II)
SCH EasyCut II long 14mm 2-point guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM 2-PT GUARD, (SHORT II)
SCH EasyCut II short 14mm 2-point guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH FINGER FOR PRO FLEX LIFTER
White replacement finger for SCH Pro Flex Lifter.
SCH KNFHD, CIH 3020, NH 740CF, RH
Fits SCH EasyCut system installed on Case-IH 3020 and New Holland 740CF, RH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on John Deere 600 series platforms. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, JD 600 FLEX, CAST TOP MOUNT
Fits SCH EasyCut system installed on John Deere 600 series platforms. Requires (2) 12mm open top guards and (1) SCP083889 knifehead hardware package.
SCH KNFHD, NH 972, 973, 73C, 74C; CIH 2020 FLEX, RH
Fits SCH EasyCut system installed on Case-IH 2020 (serial number up to CBJ021300; all HAJ), all New Holland 970, 972, 973, 974 and New Holland 74C (serial number up to PNL018300; all HAJ), right hand knifehead. Measures 4-3/4" from center of first full section to center of drive bolt. Bearings are not included. Knifehead hardware package (SCP083601) not included.
SCH P/D KNFHD, JD 200, 900 SERIES, W/SCH KNIFE
Knifehead available for John Deere flex and rigid platforms. This knifehead is used for Pro-Drives with SCH Cutter Bar.
SCH PARTS PACKAGE, WEAR PLATES
SCH Parts Bag for SCH cutting system with wear plates. Includes open top guard, standard guards, three point guard (if required), box of 25 sections with hardware, wear plate and an extra splice kit. NOTE: Please include model and width of platform.
Box of 25 SCH Coarse Sections, 7 serrations per inch, for SCH Knife. Coarse is recommended for soybeans and alfalfa.
SCH 2 hole, 5mm wear plate. Blue in color.
The Model 740 is a designed to fit 2-1/2 inch receiver tubes, includes pin. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCRAPER KIT, JD 1590, 1890, 1895, 1990, LH
Fits John Deere 1590, 1890, 1895 and 1990 drills. Installs on the depth wheel side. Each kit includes: 1 LH pre-assembled scraper and bracket.
SCRAPER KIT, JD 7000, 7100; KINZE 2000, 3000, 2-PIECE
Will fit John Deere 7000, 7100 and Kinze 2000, 3000 series planters. Two-piece design; outside scraper. No modifications or holes to drill.
SEED DISK, ESET, GOURDS, SMALL POPCORN, SMALL INDIAN CORN, PUMPKIN, SUNFLOWER #3 & #4, .115"
Replacement 30-hole eSet seed disk for gourds, small popcorn, smaill Indian corn, pumpkin DelMonte/Libby, sunflower #3 & #4. Requires purchase of speciality extractor (PPM720117).
SMART PAN PLUS AIR SEPARATOR, 20", REMOTE
20" Smart Pan plus Air Separator. Designed for use in 30” row crops when leaving high cut stubble (ex. corn & sorghum - falls in between stubble without tipping over). Also used with plot and research combines. Includes Air Separator for cleaning the sample within seconds. It can also be used to quickly cool down heated grain from the dryer so you can get an accurate moisture reading.
STALK STOMPERS, G4, AGCO, 2R, W/O TOOLBAR, 12" SHOE
2 Row - AGCO (without toolbar) G4 with 12" shoes. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Capello Diamant (without toolbar), G4 with 12" shoes.
STALK STOMPERS, G4, CAPELLO QUASAR, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Capello Quasar (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
2 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
2 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, CIH 900, 1000, 2R, W/O TOOLBAR, 12" SHOE (6 ROW CORNHEAD)
2 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
STALK STOMPERS, G4, CIH 900, 1000, 2R, W/O TOOLBAR, 12" SHOE (8 ROW CORNHEAD)
2 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
STALK STOMPERS, G4, DRAGO GT SERIES, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. NOTE: Series II 6 row heads require MYW041958 offset brackets.
STALK STOMPERS, G4, FANTINI, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Fantini (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Harvestec 5000 and 6000 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar NOT required for 2-row and 4-row applications. It will mount directly to the header brackets.
STALK STOMPERS, G4, JD 40/90, 2R, W/O TOOLBAR, 12" SHOE
2 Row Kit (2 Outer Rows) - John Deere 40/90 series (without toolbar), G4 with 12" shoes. G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 2R, W/O TOOLBAR, 12" SHOE
2 Row - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 2R, W/O TOOLBAR, 12" SHOE
2 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 2R, W/O TOOLBAR, 12" SHOE
2 Row - Lexion (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, MACDON C-SERIES, 4R, W/O TOOLBAR, 12" SHOE
4 Row - MacDon C-Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar NOT required for 2-row and 4-row applications. It will mount directly to the header brackets.
Adding a temperature sensor in the grain bin can help identify potential problems before they arise. This allows you to know your grain temperature at the bottom of the bin and the temperature and relative humidity in the headspace (exhaust air) at any time. The STEPS Bin Monitor includes a 18' cable and one temperature sensor. Additional sensors can be added at an additional cost. Note: The bin monitor does not turn anything on or off. You will need a Smart Phone and WiFi at the bin site. You can purchase a hotspot from your cell phone provider for WiFi. A free downloadable app from STEPS GMS is available to monitor it from anywhere.
Adding a temperature sensor in the grain bin can help identify potential problems before they arise. This allows you to know your grain temperature at the bottom of the bin and the temperature and relative humidity in the headspace (exhaust air) at any time. The STEPS Bin Monitor includes a 24' cable and one temperature sensor. Additional sensors can be added at an additional cost. Note: The bin monitor does not turn anything on or off. You will need a Smart Phone and WiFi at the bin site. You can purchase a hotspot from your cell phone provider for WiFi. A free downloadable app from STEPS GMS is available to monitor it from anywhere.
Adding a temperature sensor in the grain bin can help identify potential problems before they arise. This allows you to know your grain temperature at the bottom of the bin and the temperature and relative humidity in the headspace (exhaust air) at any time. The STEPS Bin Monitor includes a 32' cable and one temperature sensor. Additional sensors can be added at an additional cost. Note: The bin monitor does not turn anything on or off. You will need a Smart Phone and WiFi at the bin site. You can purchase a hotspot from your cell phone provider for WiFi. A free downloadable app from STEPS GMS is available to monitor it from anywhere.
Replacement tail for use with WaveVision seed tube, Dry. Does not include any mounting hardware.
Replacement tail for use with WaveVision seed tube, Liquid. Does not include any mounting hardware.
Replacement tail for use with WaveVision seed tube, Short Low Profile. Does not include any mounting hardware.
TIRE, GAUGE WHEEL, STANDARD, XP
Gauge Wheel Tire, 4.5" x 16" standard profile. Will fit John Deere XP, XP Pro, MaxEmerge 5, ExactEmerge; 1530, 1535 with MaxEmerge XP row units; late 1590, 1690, 1835, 1890, 1895, 1990 drills.
Dual Trail-Jet Fertilizer Opener for a Case-IH 1200 series. Will not fit Case-IH 1220. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, JD 7000, 7100, KINZE 2000 SERIES, DUAL
Dual Trail Jet Fertilizer Opener for a John Deere 7000 and John Deere 7100 series. Will also fit Kinze 2000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, WHITE 6000 SERIES, DUAL
Dual Trail-Jet Fertilizer Opener for a White 6000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TUBE HOLDER, JD ME; KINZE 2000
Stainless tube holder for Valion seed tube guard when using liquid.
Liquid tubing for Valion seed tube guard.
V-SHOT KIT, CIH 800, 900, 1200
V-Shot Insert. Fits Case-IH 1200 series. NOTE: Customer must drill one hole in center body of planter to install. The hole is for the liquid tube.
WA1532 PIN ADJUST 15" SPIKED ROW CLEANER
Pin-adjust row cleaner, 1-½” stem, 15” wheels. Wheels can only run in intersected (most aggressive) position. Mounting bracket sold separately.
This is our 10 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
15" SPIKED CLOSING WHEEL, BOLT-ON, M17, LH
Single 15" left hand spiked closing wheel for John Deere planters with a 16.95 threaded spindle on closing wheel frame.
4.5" ROTOR, AIR FILTER BLASTER
4-1/2" rotor head for filters with 4-1/2" - 6" inside diameter.
AUGER TROUGH LINER, CIH 800, 8R-30"
8 Row Auger Trough Liner for Case-IH 800 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH 900/1000, 8R-30"
8 Row Auger Trough Liner for Case-IH 900, 1000 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, 12R-30"
12 Row Auger Trough Liner for Case-IH 2600, 4200 and 4400 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, NH, 8R-30"
8 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series; New Holland 96C, 96D, 98C and 98D series cornheads with 30" rows.
AUGER TROUGH LINER, JD 200, 900, 25', (58" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 25' and 58" throat opening. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 600, 12R-30"
12 Row Auger Trough Liner for John Deere 600 series cornhead with 30" rows.
John Deere 625F Auger Trough Liner. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 90/40, 8R-30"
8 Row Auger Trough Liner for John Deere 90/40 series cornhead with 30" rows.
AUGER TROUGH LINER, NH 996, 8R-30"
8 Row Auger Trough Liner for New Holland 996 series cornheads with 30" rows.
B4, liquid in furrow, is applied at 16oz/cwt. Contains 1 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
Botanical Antimicrobial Cleaner (BAC), cleaner, is used for cleaning any agricultural and veterinary locations, food-use sites, commercial businesses and residencies. Contains 12 x 32 oz sprayer bottles.
Belt Meter for Case-IH & early Great Plains, Flat Top.
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 1 x 8oz bottle.
CRP-1-10, 10" WING, BAKER, DAMMER-DIKER, JD, KRAUSE, P-K, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Baker/Laney inline and v-rippers; Bigham Brothers MegaTill Max Subsoilers; John Deere 510, 512, 955, 2700, 2720, 2730 Disc Rippers and 913, 915 V-rippers; Krause TL3000 & 4880 Land Builder; Missouri Machine/ Rome RVR and RSR Series Rippers.
CRP-11, 7" WING, LANDOLL WEATHERPROOFER, 2200, 2300, 1-1/8" SHANK
Conservation ripper point with 7" wings. Available for 1-1/8" shanks. Will fit Landoll WeatherProofer 2200, 2300 series.
CRP-18, 2-1/2" NO WINGS, UNVERFERTH RIPPER/STRIPPER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit Unverferth 310, 330, 332 Ripper/Stripper.
CRP-2, 7" WING, CASE-IH, DMI, KRAUSE DOMINATOR, SALFORD, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit 500, 527, 527B, 530, 530B, 690, 730, 870, 875 MRX 690, 930; Glencoe/White Coulter chisels CC4450 and White 435 and 445 with Deep Till Shanks; Kuhn/Krause Dominator; New Holland front shanks ST770, ST775, ST720, ST740; Salford 9700, 9800 series.
CRP-2B, 7" WING, BRILLION, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Brillion Land Commander 1 and 2.
CRP-4, 7" WING, M&W, SUNFLOWER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit M&W Earthmaster 900, 1100, 1400, 1700, 1800, 2200, 2500 series; Sunflower 4213, 4233, 4412, 4511, 4530 series.
CRP-44-10, 10" WING, GREAT PLAINS, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series.
DIMPLE CLOSING WHEELS, 20-PT, BOLT-ON, 5/8", M16
13", 20 point dimple closing wheels for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
DIMPLE CLOSING WHEELS, 20-PT, BOLT-ON, M17
13", 20 point dimple closing wheels for John Deere planters with a 16.95 threaded spindle on closing wheel frame.
DISC ASSEMBLY, 14"-11 NOTCH OFFSET, CIH
Seed opener for Case-IH 400, 500, 800, 900 and 1200 series. Also fits White 5100 and 5700 series. V-Slice Inserts must always be used when using notched discs. The 14-notch disc should be the lead disc.
DISC ASSEMBLY, 204/205B, 14" X 3.5MM LEADING, FDN
Disc opener LEADING assembly, 14" diameter x 3.5mm thick. Includes blade, 204/205 hybrid bearing and hub. Will fit 800, 900, 1200 series planters; 5400, 5500 soybean special drills.
DISC ASSEMBLY, 204/205B, 15" X 3.5MM, LP CAST HUB, FDN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, 204/205 hybrid bearing and low profile cast hub. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5; Kinze 3000, 4000 series. The Kinze 3000 and 4000 series require a longer bolt, order HDW220049 hardware kit.
DISC ASSEMBLY, NOTCHED, GP, 13.5"
Drill disc assembly, Great Plains. All 13-1/2 double disc opener drills. Replaces Great Plains 107-130S, 107-133S, 107-135S, 107-138S.
ESET KIT, MAXEMERGE, MAXEMERGE 2, MAX EMERGE PLUS, XP, ME5
Fits John Deere single inlet vacuum meters after 1990 with standard seed hopper; MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP and MaxEmerge 5 row units. Includes 30-cell seed corn disk, liner (baffle), singulator, brushes, extractor and set-up tool. Meter housing is NOT included.
Used in all belt meter kits.
KNIFE ASSEMBLY & KNFHD, JD 220, 920, 7SPI
OEM 20-foot sectional knife assembly with coarse tooth sections (7-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 30', 14SPI
OEM 30-foot sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 625F, 925D, 7SPI
OEM 25-foot sectional knife assembly with coarse tooth sections (7-SPI) for John Deere 625 auger platform and 925 draper platform with 4" cutting system. Hardware is included. Does NOT include the RSP002559 knifehead for 625 or RSP080573 knifehead for 925 draper. Coarse tooth sections are recommended for soybeans and alfalfa.
MARTIN BIDIRECTIONAL CONTROL KIT, 12 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 12 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 16 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 16 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 23 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 23 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 24 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 24 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 31 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 31 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 32 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 32 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 36 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 36 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 48 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 48 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 54 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 54 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 6 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 6 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MARTIN BIDIRECTIONAL CONTROL KIT, 8 ROW, W/COMPRESSOR
Martin Manual Bidirectional air control kit for 8 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
MOUNT, WA1345, WA1360, KINZE 4900, W/O NTC
Will fit Kinze 4900 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly. Requires 19" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MOUNT, WA1360, JD 7200, 1700 SERIES, W/NTC
Will fit JD7200, 7300 and all JD 1700 series with John Deere OEM unit mount no-till coulter to mount the WA1360 floating row cleaner assembly. Requires 22" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16, ROLL PIN
MudSmith wheel with 3" x 16" standard tire with water pump (roll pin) style bearing. Will fit John Deere, Kinze, Monosem and White planters with a water pump (roll pin) bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
OEM KNFHD, JD 200 & 900 SERIES
OEM replacement knifehead (AH121075) for John Deere 200 & 900 series headers with 3" cutting system.
OEM SECTION, JD 3", 7SPI, BOX OF 25
Box of 25, John Deere 3" coarse section, 7 serrations per inch. Will fit John Deere 200 and 900 series with 3" cutting system. Coarse sections are recommended for soybeans and alfalfa.
P/D KIT, CIH 1020, LATE OIL WB, CIH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number JJC0323605 and up. Also serial number CBJ023001 and up. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, CIH 1020, LATE OIL WB, SCH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number JJC0323605 and up. Also serial number CBJ023001 and up. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, JD 200,900 FLEX, W/230 M12, JD
CH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 12mm clevis. Also available for JD Flex 9000 series with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/230 M12, SCH
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 12mm clevis. Also available for JD Flex 9000 series with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, CIH 2020, NH 74C, PKG OF 24
Case-IH 2020 and NH 74C poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH 3020, 3162, NH 740CF, PKG OF 24
Case-IH 3020, 3162 and New Holland 740CF poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, PKG OF 24
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, PKG OF 24
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 200, 900, PKG OF 24
John Deere 200/900 poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600F, 600R, PKG OF 24
John Deere 600F/600R poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600FD, 600D, 700FD, 700D, RDF, PKG OF 24
John Deere 600FD, 600D, 700FD, 700D, RDF series single poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, MACDON, PKG OF 100
MacDon FM100 Float Module poly finger only, package of 100. Guide kit and hardware NOT included.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 1/4", (2012)
35' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 1/4", (2015)
35' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 1/4",(2013/2014)
35' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 35', PREDRILLED, 1/4"
35 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
30 Ft. Case-IH 2062 (before serial #CCC0015328); MacDon 974 (2005 & before); New Holland 84C (before serial #PPP001119) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 16', PRE-DRILLED 1/4"
16 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, PRE-DRILLED, 15' X 1/4"
15 Ft. JD 200F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, 15', PRE-DRILLED, 3/8"
15 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE, 5.9 X 9.75 X 1/4
John Deere 600FD Center Skid Shoe - 5.9" x 9.75" - Yellow - 1/4" - Predrilled.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, SWEET CORN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 12F, SWEET CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series.
SCH 17MM 2-PT GUARD, (LONG II)
SCH EasyCut II long 17mm 2-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM 2-PT GUARD, (SHORT II)
SCH EasyCut II short 17mm 2-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH KIT, NH FLEX 972, 973, 73C, 74C 25' DD (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
Fits SCH EasyCut system installed on Case-IH 1010 & 1020 series platforms. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, JD 600FD, 700FD, RD40, RD45, LH
Fits SCH EasyCut system installed on John Deere 600 and 700 series Flex Drapers, Left Hand Knifehead. Does NOT fit John Deere 600 series Flex platforms. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on Massey Ferguson 642, 8450, 8460, S450 and Claas 642, 8450, 8460, S450 on platforms 15' and smaller. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH P/D KNFHD, AGCO 300, 400, 500, 700, 800, 7000, 8000
Knifehead available for AGCO flex and rigid platforms. This knifehead is used for Pro-Drives with SCH Cutter Bar.
SCH PARTS PACKAGE, DOUBLE DRIVE
SCH Parts Package for SCH double drive cutting system. Includes center guards, countersunk sections with hardware and an extra overlap strap. NOTE: Please include model and width of platform.
Package of ten, 11 serrations per inch, knife sections with 20 Bolts and 20 Nuts for the SCH knife system. Fine is recommended for wheat and grasses.
SCH 2 hole, 6mm wear plate. Black in color.
SCHUCK 750 RTR HITCH, 3-1/2" DROP, 2" RT
The Model 750-RTR is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 3.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCRAPER KIT, JD 7200, 1700, 2-PIECE
Fits John Deere 7200 series & newer planters, including XP, XP Pro, MaxEmergePlus and MaxEmerge2. Scrapers install on factory moiunting arms. Two-piece design; outside scraper. No modifications required.
Replaces rotary scraper; uses existing scraper arm. Fits all models of Krause drills using rotary scrapers.
Seed Boot, for John Deere 750 & 1850 - Right Hand
SEED DISK, ESET, MED POPCORN, PUMPKINS, SMALL SWEET CORN, SQUASH, SUNFLOWERS #1 & #2, .125"
Replacement 30-hole eSet seed disk for medium popcorn, ornamental pumpkins, small sweet corn, squash, sunflower #1 & #2. For medium popcorn, pumpkins ornamental, squash, sunflowers #1 & #2, requires purchase of speciality extractor (PPM720117). For small sweet corn, requires purchase of speciality singulator (PPM720386) and speciality extractor (PPM720117).
Seed tube bracket is welded to the guard. Fits all John Deere row units with curved seed tubes. Will not fit XP series. Will fit all Kinze except 3000 series row units.
Shin guard, Blue-Jet Sub-Tiller II with 1-1/2" shank.
Individual replacement Long Tooth slat. Used in Long Tooth chaffers and sieves.
The most popular system! Handy size to carry around in your pick up or grain truck — perfect when working with a lot of different combines. 40” is the ideal size to mount higher, under feederhouse, to avoid tall stalks or stubble. A good choice for corn and soybean growers. An optional Air Separator is available for cleaning the sample within seconds. It can also be used to quickly cool down heated grain from the dryer so you can get an accurate moisture reading.
STALK STOMPERS, G4, AGCO, 4R, W/ TOOLBAR, 12" SHOE
4 Row - AGCO (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Capello Diamant (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CAPELLO QUASAR, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Capello Quasar (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
4 Row - 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. For all rows on a 6 row cornhead except 3 and 4. No coverage under the feederhouse. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
4 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. Does not provide any coverage under the feederhouse. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 4R, W/ TOOLBAR, 12" SHOE (6 ROW CORNHEAD)
4 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 4R, W/ TOOLBAR, 12" SHOE (8 ROW CORNHEAD)
4 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. NOTE: Series II 6 row heads require MYW041958 offset brackets.
STALK STOMPERS, G4, FANTINI, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Fantini (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Harvestec 5000 and 6000 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 4R, W/ TOOLBAR, 12" SHOE
4 Row Kit (4 Outer Rows) - John Deere 40/90 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 4R, W/ TOOLBAR, 12" SHOE
4 Row - John Deere 600/700 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 4R, W/ TOOLBAR, 12" SHOE
4 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 4R, W/ TOOLBAR, 12" SHOE
4 Row - Lexion (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, MACDON C-SERIES, 6R, W/ TOOLBAR, 12" SHOE
6 Row - MacDon C-Series ( toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
Trail-Jet Fertilizer Opener for a Case-IH 1215-1265 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, JD 7200, 7300, 1700, ME2
Trail Jet Fertilizer Opener for a John Deere 7200, John Deere 7300, and John Deere 1700 series with MaxEmerge 2 row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
Trail Jet Fertilizer Opener for a White 8000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-Slice Insert. Fits Kinze 2000 series and all John Deere except XP row units. Also fits New Idea 9200.
This is our 15 ft. sprayer boom kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
15" SPIKED CLOSING WHEEL, BOLT-ON, M17, RH
Single 15" right hand spiked closing wheel for John Deere planters with a 16.95 threaded spindle on closing wheel frame.
6" rotor head for filters with 6" - 9" inside diameter. Included in the air filter blaster kit.
AUGER TROUGH LINER, CIH 800, 12R-30"
12 Row Auger Trough Liner for Case-IH 800 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH 900/1000, 12R-30"
12 Row Auger Trough Liner for Case-IH 900, 1000 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, 16R-30"
16 Row Auger Trough Liner for Case-IH 2600, 4200 and 4400 series cornheads with 30" rows.
AUGER TROUGH LINER, CIH, NH, 12R-30"
12 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series; New Holland 96C, 96D, 98C and 98D series cornheads with 30" rows.
AUGER TROUGH LINER, JD 200, 900, 25', (46" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 25' and 46" throat opening. Pop rivets and 1/64" drill bit included with kit.
John Deere 630F Auger Trough Liner. Pop rivets and 1/64" drill bit included with kit.
AUGER TROUGH LINER, JD 90/40, 12R-30"
12 Row Auger Trough Liner for John Deere 90/40 series cornhead with 30" rows.
AUGER TROUGH LINER, NH 996, 12R-30"
12 Row Auger Trough Liner for New Holland 996 series cornheads with 30" rows.
B4, liquid in furrow, is applied at 16oz/cwt. One case contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
Bearing for SCP011125 knifehead.
BIG SHOT MAXIM, 8 OZ, CASE OF 60
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 60 x 8oz bottles.
CAM ADJUST, WA1360, ALL JD; KINZE W/O NTC
Optional cam dial depth adjustment for WA1360 row cleaners. Adjust depth in 1/4" increments. For all John Deere and Kinze without no-till coulters.
CLEAN SWEEP BRACKET, C125MTR, CIH, JD 7000, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Martin C125 with no-till coulter. Will fit John Deere 7000 and 7100; White 6000 and 8000 series; Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CRP-14, 7" WING, BRILLION, 1" SHANK
Conservation ripper point with 7" wings. Available for 1" shanks. Will fit subsoilers with 1" shank. Will NOT fit Brillion Land Commander.
CRP-25, 7" WING, UNVERFERTH RIPPER/STRIPPER, 3/4" SHANK
Conservation ripper point with 7" wings. Available for 3/4" shanks. Will fit Unverferth 310, 330, 332 Ripper/Stripper.
CRP-26-7, 7" WING, SUNFLOWER, WILRICH, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Sunflower 4610, 4630, 4710, 4730 series; Wilrich SoilPro, 657 DCR/ripper.
CRP-3, 7" WING, CASE-IH, DMI, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.
CRP-50-7, 7" WING, LANDOLL WEATHERPROOFER, 2400, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Landoll WeatherProofer 2400 series.
DISC ASSEMBLY, 14"-15 NOTCH OFFSET, CIH
Seed opener for Case-IH 400, 500, 800, 900 and 1200 series. Also fits White 5100 and 5700 series. V-Slice Inserts must always be used when using notched discs. The 14-notch disc should be the lead disc.
DISC ASSEMBLY, 204/205B, 14" X 3.5MM TRAILING, FDN
Disc opener TRAILING assembly, 14" diameter x 3.5mm thick. Includes blade, 204/205 hybrid bearing and hub. Will fit 800, 900, 1200 series planters; 5400, 5500 soybean special drills.
DISC ASSEMBLY, NOTCHED, GP, 13.5", BOX OF 2
Drill disc assembly, Great Plains. All 13-1/2 double disc opener drills. Replaces Great Plains 107-130S, 107-133S, 107-135S, 107-138S.
GATEWAY, BS, JD S660, S670, S680, S690; ELECTRIC ADJUST, 33LT, 4P
Bottom Sieve. Four panels with one adjuster. Long tooth (7/8") with a row to row spacing of 33 mm (1-1/8"). Frame size is 51.89" x 63.90". (Photo is not actual sieve) Replaces OEM Part#-AXE20450.
GAUGE WHEEL, 4.5 X 16, JD, WHITE, SET SCREW
Gauge Wheel Assembly with 4.5" x 16" standard profile tire mounted on black metal halves with black plastic hub with set set screw style bearing. Will fit on John Deere MaxEmerge Plus, MaxEmerge Pro planters; John Deere 1530, 1535 with MaxEmerge Pro row units; White 6000.
Graphite, 5-LB jug. Precision Planting brand of graphite powder.
KNIFE ASSEMBLY & KNFHD, JD 220, 920, 11SPI
OEM 20-foot sectional knife assembly with fine tooth sections (11-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 30', 7SPI
OEM 30-foot sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 625F, 925D, 14SPI
OEM 25-foot sectional knife assembly with fine tooth sections (14-SPI) for John Deere 625 auger platform and 925 draper platform with 4" cutting system. Hardware is included. Does NOT include the RSP002559 knifehead for 625 or RSP080573 for 925 draper. Fine tooth sections are recommended for wheat and grasses.
MARTIN BIDIRECTIONAL CONTROL KIT, 12 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 12 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 16 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 16 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 23 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 23 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 24 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 24 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 31 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 31 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 32 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 32 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 36 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 32 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 48 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 48 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 54 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 54 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 6 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 6 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MARTIN BIDIRECTIONAL CONTROL KIT, 8 ROW, W/O COMPRESSOR
Martin Manual Bidirectional air control kit for 8 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
MOUNT, WA1345, WA1360, JD 7200, 1700; WHITE 9000, W/SINGLE UMO
Will fit John Deere 7200, 7300, 1700 series and White 9000 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly and UMO-100 fertilizer opener. Requires 25" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MOUNT, WA1345, WA1360, KINZE 4900, W/SINGLE UMO
Will fit Kinze 4900 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly and UMO-100 fertilizer opener. Requires 25" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16 RID, ROLL PIN
MudSmith wheel with 3" x 16" reduced inner diameter(RID) tire with water pump (roll pin) style bearing. Will fit John Deere, Kinze, Monosem and White planters with a water pump (roll pin) bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
OEM SECTION, JD 3", 11SPI, BOX OF 25
Box of 25, John Deere 3" fine section, 11 serrations per inch. Will fit John Deere 200 and 900 series with 3" cutting system. Fine sections are recommended for wheat and grasses.
SCH Pro-Drive Kit available for Case-IH Rigid 1010.
SCH Pro-Drive Kit available for Case-IH Rigid 1010.
P/D KIT, JD 200,900 FLEX, W/240 M12, JD
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 12mm clevis. Also available for JD Flex 8820 with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife horizontal drive.
P/D KIT, JD 200,900 FLEX, W/240 M12, SCH
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 12mm clevis. Also available for JD Flex 8820 with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife horizontal drive.
POLY FINGER KIT, JD 600F, 600R, SINGLE
John Deere 600F/600R poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, JD 600FD, 600D, 700FD, 700D, RDF, PKG OF 12
John Deere 600FD, 600D, 700FD, 700D, RDF series poly finger kit. Guide kit and hardware included.
POLY FINGER ONLY, CIH 2020, NH 74C, SINGLE
Case-IH 2020 and NH 74C poly finger only. Guide kit and hardware NOT included.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 3/8", (2012)
35' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 3/8", (2013/2014)
35' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 3/8", (2015)
35' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 40', PREDRILLED, 1/4"
40 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
36 Ft. Case-IH 2062 (before serial #CCC0015328); MacDon 974 (2005 & before); New Holland 84C (before serial #PPP001119) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 18', PRE-DRILLED 1/4"
Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 16.5', PRE-DRILLED, 3/8"
16.5 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 15', PRE-DRILLED, 3/8"
15 Ft. JD 200F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, PRE-DRILLED, 15' X 1/4"
15 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, END SKID SHOE, LH, 12 X 33 X 3/8
John Deere 600F Left End Skid Shoe - 12" x 33" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE, 5.9 X 9.75 X 3/8
John Deere 600FD Center Skid Shoe - 5.9" x 9.75" - Yellow - 3/8"- Predrilled.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 6F, PUMPKIN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. The pumpkin finger set has 6 fingers and the flags are modified into the shape of a pendant.
PRECISION METER, JD 7000, KZ 2000, 6F, PUMPKIN
Precision Finger Pick-Up Meter for pumpkins, fits John Deere 7000, 7100; Kinzel 2000 series. Pumpkin meters have 6 fingers and the flags are modified into the shape of a pendant. The pumpkin meter has a "C" insert installed which has a unique agitation profile that improves singulation. The pumpkin meter comes with an adjustable brush. For optimum performance, run the pumpkin meter on a Test Stand with the seed you are planting for the proper brush setting. It is recommended that the hole in the "C" insert is modified by enlarging it so there is a larger opening for the seed to exit. Generally, the 6-finger pumpkin meter will plant around 5,000 seeds per acre, which is typical for smaller canning pumpkins. For larger Jack-O-Lantern pumpkins you will need to modify the finger set so it only has 2 fingers. This will reduce the population by one-third.
PRECISION METER, KZ 3000, 12F, CORN
Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series. Recommended for 30" or greater row spacing.
SCH 12MM 3-PT GUARD, (LONG II)
SCH EasyCut II long 12mm 3-point guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
Fits SCH EasyCut systems installed on AGCO-Gleaner, Series III, 300, 500, 8000 & 8200. John Deere, 200, 900, 900F, 900R, 600F & 600R series. All Honey Bee platforms. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM OPEN TOP GUARD, (SHORT II)
SCH EasyCut II short 12mm 2-point open top guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
Fits SCH EasyCut system installed on Case-IH 820 series platforms. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, JD 600FD, 700FD, RD40, RD45, RH
Fits SCH EasyCut system installed on John Deere 600 and 700 series Flex Drapers, Right Hand Knifehead. Does NOT fit John Deere 600 series Flex platforms. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Knifehead available for Massey-White 9750. This knifehead is used for Pro-Drives with SCH Cutter Bar.
Package of ten, 7 serrations per inch, knife sections with 20 Bolts and 20 Nuts for the SCH knife system. Coarse is recommended for soybeans and alfalfa.
SCH 3 hole, 4mm wear plate. Brown in color.
SCHUCK 750 RTR HITCH, 3-1/2" DROP, 2-1/2" RT
The Model 750-RTR is a designed to fit 2-1/2 inch receiver tubes, includes pin. This hitch has a 3.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCRAPER KIT, CNH SDX DRILL, RH
Fits right side of Case-IH SDX no-till drills on gauge wheel side. Quick and easy to install; no holes drilled, no fasteners, and features Air Design’s long lasting Tungsten Carbide edge for positive disk cleaning. The unique bracket simply uses 2 washers and a bolt, and you are back in the field saving time and money.
SCRAPER KIT, JD 7200, 1700, 1-PIECE
Fits John Deere 7200 series & newer planters, including XP, XP Pro, MaxEmergePlus and MaxEmerge2. One-piece design; outside scraper.
Requires two belts per meter. Sold individually.
Seed Boot, for John Deere 750 & 1850 - Left Hand
SEED DISK, ESET, LARGE POPCORN, MED SWEET CORN, .135"
Replacement 30-hole eSet seed disk for large popcorn and medium sweet corn. For large popcorn, requires purchase of speciality extractor, (PPM720117). For medium sweet corn, requires purchase of speciality singulator (PPM720386) and speciality extractor (PPM720117).
SEED TUBE GUARD, JD XP, XP PRO, ME5
Seed tube bracket is welded to the guard. Fits John Deere 1700 series planters with MaxEmerge XP, MaxEmerge XP Pro and MaxEmerge 5 row units with curved seed tube.
SLAT, SHORT TOOTH, 28", SINGLE
Individual replacement Short Tooth slat. Used in Short Tooth chaffers and sieves.
SMART PAN PLUS AIR SEPARATOR, 40", DUAL
40" Smart Pan plus Air Separator. The most popular system! Handy size to carry around in your pick up or grain truck — perfect when working with a lot of different combines. 40” is the ideal size to mount higher, under feederhouse, to avoid tall stalks or stubble. A good choice for corn and soybean growers. Includes Air Separator for cleaning the sample within seconds. It can also be used to quickly cool down heated grain from the dryer so you can get an accurate moisture reading.
STALK STOMPERS, G4, AGCO, 4R, W/O TOOLBAR, 12" SHOE
4 Row - AGCO (without toolbar) G4 with 12" shoes. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Capello Diamant (without toolbar), G4 with 12" shoes.
STALK STOMPERS, G4, CAPELLO QUASAR, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Capello Quasar (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
4 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. For all rows on a 6 row cornhead except 3 and 4. No coverage under the feederhouse.
4 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. Does not provide any coverage under the feederhouse.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, CIH 900, 1000, 4R, W/O TOOLBAR, 12" SHOE (6 ROW CORNHEAD)
4 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
STALK STOMPERS, G4, CIH 900, 1000, 4R, W/O TOOLBAR, 12" SHOE (8 ROW CORNHEAD)
4 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
STALK STOMPERS, G4, DRAGO GT SERIES, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. NOTE: Series II 6 row heads require MYW041958 offset brackets.
STALK STOMPERS, G4, FANTINI, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Fantini (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Harvestec 5000 and 6000 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 4R, W/O TOOLBAR, 12" SHOE
4 Row Kit (4 Outer Rows) - John Deere 40/90 series (without toolbar), G4 with 12" shoes. G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 4R, W/O TOOLBAR, 12" SHOE
4 Row - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 4R, W/O TOOLBAR, 12" SHOE
4 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 4R, W/O TOOLBAR, 12" SHOE
4 Row - Lexion (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, MACDON C-SERIES, 6R, W/O TOOLBAR, 12" SHOE
6 Row - MacDon C-Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
TRAIL-JET, CIH 1215-1265, DUAL
Dual Trail-Jet Fertilizer Opener for a Case-IH 1215-1265 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, JD 7200, 7300, 1700, ME2, DUAL
Dual Trail Jet Fertilizer Opener for a John Deere 7200, John Deere 7300, and John Deere 1700 series with MaxEmerge 2 row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, WHITE 8000 SERIES, DUAL
Dual Trail Jet Fertilizer Opener for a White 8000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-Shot Insert. Fits John Deere 7000, 7100 MaxEmerge (built in 1984, 1985 and early 1986).
This is our 20 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
1/4" FPT X 3/8" HB, NYLON ELBOW
15" SPIKED CLOSING WHEEL, ROLL PIN, LH
Single 15" left hand spiked closing wheel for John Deere, Kinze and White planters where closing wheels are attached with roll pin.
9" rotor head for filters with inside diameter over 9".
ADAPTER KIT, JD DRILL SEED TUBES
AUGER TROUGH LINER, CIH, 16R-30"
16 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series.
AUGER TROUGH LINER, JD 200, 900, 22-24', (58" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 22'-24' and 58" throat opening. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included with kit.
John Deere 635F Auger Trough Liner. Pop rivets and 1/64" drill bit included with kit.
Botanical Antimicrobial Cleaner (BAC), cleaner, is used for cleaning any agricultural and veterinary locations, food-use sites, commercial businesses and residencies. Contains 4 x 128 oz container.
Botanical Antimicrobial Cleaner (BAC), cleaner, is used for cleaning any agricultural and veterinary locations, food-use sites, commercial businesses and residencies. Contains 1 x 55 gallon drum.
BEARING & FLANGE KIT, NOTCHED DISC
Bearing & Flange kit for APL101711, APL101715, APL109811 and APL109815.
BELT METER KIT, GP3PD15 15' 6"
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 1 x 32oz bottle.
CLEAN SWEEP STOP KITS, JD 7200, 1700
Required on John Deere 7200 and 1700 series planters with long parallel arms and row unit mounted no-till coulter. NOTE: 1 required per row.
CRP-11-10, 10" WING, LANDOLL WEATHERPROOFER, 2200, 2300, 1-1/8" SHANK
Conservation ripper point with 10" wings. Available for 1-1/8" shanks. Will fit Landoll WeatherProofer 2200, 2300 series.
CRP-2-10, 10" WING, CASE IH, DMI, KRAUSE DOMINATOR, SALFORD, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit 500, 527, 527B, 530, 530B, 690, 730, 870, 875 MRX 690, 930; Glencoe/White Coulter chisels CC4450 and White 435 and 445 with Deep Till Shanks; Kuhn/Krause Dominator; New Holland front shanks ST770, ST775, ST720, ST740; Salford 9700, 9800 series.
CRP-2B-10, 10" WING, BRILLION, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Brillion Land Commander 1 and 2.
CRP-4-10, 10" WING, M&W, SUNFLOWER, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit M&W Earthmaster 900, 1100, 1400, 1700, 1800, 2200, 2500 series; Sunflower 4213, 4233, 4412, 4511, 4530 series.
CRP-60, 2-1/2" NO WINGS, UNVERFERTH ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit Unverferth 112, 122, 132 Zone-Builders.
DISC ASSEMBLY, 204/205B, 14" X 4.5MM LEADING, FDN
Disc opener LEADING assembly, 14" diameter x 4.5mm thick. Includes blade, 204/205 hybrid bearing and hub. Will fit 800, 900, 1200 series planters; 5400, 5500 soybean special drills.
DISC ASSEMBLY, 204B, 15" X 3.5MM, FDN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, single 204 bearing, hub and plastic dust cap. Will fit John Deere MaxEmerge, MaxEmerge 2, Plus, Pro.
DISC ASSEMBLY, SMOOTH, GP, 15"
Drill disc assembly, Great Plains HD, 15 and 25 series drills. Yield Pro Planters. Replaces Great Plains 404-072S and 404-121S.
Bottom Sieve. Four panels with one adjuster. Long tooth (7/8") with a row to row spacing of 33 mm (1-1/8"). Frame size is 51.89" x 56.93".(Photo is not actual sieve) Replaces OEM Part#-87109848.
KEETON, QUICK ATTACH, WHITE 9000, LP TAIL
Keeton Seed Firmer, Low Profile Tail, Quick Attach. Fits White 9000 series row units. Mounts to seed disc opener shafts and lower seed tube pin.
KNIFE ASSEMBLY & KNFHD, JD 222, 922, 7SPI
OEM 22-foot sectional knife assembly with coarse tooth sections (7-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 35', 14SPI
OEM 35-foot sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
MOUNT, WA1345, WA1360, JD 7200, 1700 SERIES, W/DD FO
Will fit JD7200, 7300 and all JD 1700 series with John Deere OEM unit mount double disc fertilizer openers to mount the WA1345 and WA1360 floating row cleaner assembly. NOTE: One bracket per row.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16, SET SCREW
MudSmith wheel with 4.5" x 16" standard tire with set screw style bearing. Will fit John Deere and White planters with set screw style bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
OEM SECTION, JD 4", PLATED, 7SPI, BOX OF 25
Box of 25, John Deere 4" coarse sections (7-SPI) with zinc plating finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600, 700 flex draper with 4" cutting system. Coarse sections are recommended for soybeans and alfalfa.
P/D KIT, JD 200,900 FLEX, W/230 M16, JD
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 16mm clevis. Also available for JD Flex 9000 series with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/230 M16, SCH
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 16mm clevis. Also available for JD Flex 9000 series with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER KIT, CIH 3020, 3162, NH 740CF, SINGLE
Case-IH 3020, 3162 and New Holland 740CF poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, CIH, MACDON, NH, SINGLE
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, CIH, MACDON, NH, SINGLE
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, JD 200, 900, SINGLE
John Deere 200/900 poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, JD 600D, 600FD, 700FD, SINGLE
John Deere 600D, 600FD, 700FD poly finger kit. Guide kit and hardware included.
POLY FINGER ONLY, JD 600F, 600R, SINGLE
John Deere 600F/600R poly finger only. Guide kit and hardware NOT included.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 1/4", (2012)
40' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 1/4", (2015)
40' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 1/4",(2013/2014)
40' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 45', PREDRILLED, 1/4"
45 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
20 Ft. Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, PRE-DRILLED, 16' X 1/4"
16 Ft. JD 200F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, END SKID SHOE, RH, 3 X 14.5 X 1/4
John Deere 600F Right End Skid Shoe - 3" x 14.5" - Yellow - 1/4"- Predrilled.
POLY, YELLOW, JD 600FD (2012-2015), END SKID SHOE, LH, 11.625 X 34.75 X 3/8
John Deere 600FD (2012-2015) Left End Skid Shoe - 11.625" x 34.75" - Yellow - 3/8" - Predrilled.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, SUNFLOWER
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 12F, SUNFLOWER
Precision Finger Pick-Up Meter for sunflowers, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series. This special meter is used for #3 and #4 size sunflowers.
Steel wheel, 12.5" in diameter with razor shaped points, 3-bolt and 4-bolt pattern. Left hand on row cleaner & Right hand on closing wheels.
ROW CLEANER, WA1360, RAZOR WHEELS, JD 7200, 7300, 1700, DB, W/DD FO
WA1360 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit John Deere 7200, 7300, 1700, DB series with double disc fertilizer openers.
ROW CLEANER, WA1360, SPIKED WHEELS, JD 7200, 7300, 1700, DB, W/DD FO
WA1360 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit John Deere 7200, 7300, 1700, DB series with double disc fertilizer openers.
SCH 14MM 3-PT GUARD, (LONG II)
SCH EasyCut II long 14mm 3-point guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM OPEN TOP GUARD, (SHORT II)
SCH EasyCut II short 14mm 2-point open top guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
Fits SCH EasyCut system installed on John Deere 50, 250, 350 and 450, Bushing Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH 3 hole, 5mm wear plate. Blue in color.
SCHUCK 750 RT HITCH, 5-1/2" DROP, 2" RT
The Model 750-RT is a designed to fit 2 inch receiver tubes, includes pin. This hitch has a 5.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCRAPER KIT, CIH 800, 900 SERIES, OUTSIDE
Fits Case-IH 800-1200 series planters. Attaches directly on 800-1200 series Case-IH planter scraper arms with rivets. Installs with rivets (not included) that are currently used with Case-IH scraper. Two piece design; outside scraper. No modiifications or holes to drill.
SCRAPER KIT, CNH SDX DRILL, LH
Fits left side of Case-IH SDX no-till drills on gauge wheel side. Quick and easy to install; no holes drilled, no fasteners, and features Air Design’s long lasting Tungsten Carbide edge for positive disk cleaning. The unique bracket simply uses 2 washers and a bolt, and you are back in the field saving time and money.
SEED BOOT, JD 1560, 1565, 1860, TOP RH
Seed Boot, for John Deere 1560, 1565 & 1860 - Top Right Hand
SEED DISK, ESET, LARGE SWEET CORN, .145"
Replacement 30-hole eSet seed disk for large sweet corn. Requires purchase of speciality singulator (PPM720386) and speciality extractor (PPM720117).
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 12 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 12 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 16 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 23 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 23 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 24 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 24 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 31 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 31 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 32 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 32 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 36 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional standard flow air control kit for 36 row planter. Includes compressor, standard flow air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compatible with the Martin app or ISOBUS. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 48 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 47 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 54 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 54 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 6 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 6 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 8 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 8 row planter. Includes electronic controller, compressor, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
If you are a fan of windrowing straw when checking your grain loss and want to catch a sample from the entire width of your sieves then this is the fit for you. An optional Air Separator, BPS200100, is available for cleaning the sample within seconds. It can also be used to quickly cool down heated grain from the dryer so you can get an accurate moisture reading.
STALK STOMPERS, G4, AGCO, 6R, W/ TOOLBAR, 12" SHOE
6 Row - AGCO (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Capello Diamant (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CAPELLO QUASAR, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Capello Quasar (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
4 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For rows (3-7) on a 8 row cornhead and rows (5-8) on a 12 row cornhead. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 6R, W/ TOOLBAR, 12" SHOE (6 ROW CORNHEAD)
6 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 6R, W/ TOOLBAR, 12" SHOE (8 ROW CORNHEAD)
6 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. NOTE: Series II 6 row heads require MYW041958 offset brackets.
STALK STOMPERS, G4, FANTINI, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Fantini (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Harvestec 5000 and 6000 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 600/700, 6R, W/ TOOLBAR, 12" SHOE
6 Row - John Deere 600/700 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 6R, W/ TOOLBAR, 12" SHOE
6 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 6R, W/ TOOLBAR, 12" SHOE
6 Row - Lexion (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, MACDON C-SERIES, 8R, W/ TOOLBAR, 12" SHOE
8 Row - MacDon C-Series ( toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
TRAIL-JET, CIH 800, 900 SERIES
Trail Jet Fertilizer Opener for a Case-IH 800 and Case-IH 900 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, JD 1700 SERIES MAXEMERGE PLUS
Trail Jet Fertilizer Opener for a John Deere 1700 series with MaxEmerge Plus row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-SHOT KIT, JD ME -1984; KINZE 2000
V-Shot Insert. Fits John Deere 7000, 7100 MaxEmerge and Kinze 2000 series planters.
This is our 30 ft. self-propelled kit that can eaThis is our 30 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
13" NOTCHED MARKER DISC ASSEMBLY
Acra-Plant 13" notched marker disc for John Deere 7000-7300, 1700 series, Kinze and Case-IH 800, 900 series. Additional mounting bracket is required for Case-IH series. NOTE: For John Deere prior to 1974, must purchase AA27924 from a John Deere dealer.
15" SPIKED CLOSING WHEEL, ROLL PIN, RH
Single 15" right hand spiked closing wheel for John Deere, Kinze and White planters where closing wheels are attached with roll pin.
AUGER TROUGH LINER, JD 200, 900, 22-24', (46" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 22'-24' and 46" throat opening. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included with kit.
Botanical Antimicrobial Cleaner (BAC), cleaner, is used for cleaning any agricultural and veterinary locations, food-use sites, commercial businesses and residencies. Contains 1 x 300 gallon tote.
BIG SHOT MAXIM, 32 OZ, CASE OF 12
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 12 x 32oz bottles.
CONVERSION PACKAGE, FIELD TRACKER
HCC002237 Conversion Package is required for all Case-IH 2144, 2166 and 2188 combines. For use with HCC002013 and HCC002015 Field Tracker kits.
CRP-14-10, 10" WING, BRILLION, 1" SHANK
Conservation ripper point with 10" wings. Available for 1" shanks. Will fit subsoilers with 1" shank. Will NOT fit Brillion Land Commander.
CRP-26-7, 10" WING, SUNFLOWER, WILRICH, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Sunflower 4610, 4630, 4710, 4730 series; Wilrich SoilPro, 657 DCR/ripper.
CRP-3-10, 10" WING, CASE-IH, DMI, 1-1/2" SHANK
Conservation ripper point with 10" wings. Available for 1-1/2" shanks. Will fit 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.
CRP-50, 10" WING, LANDOLL WEATHERPROOFER, 2400, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Landoll WeatherProofer 2400 series.
CRP-60-7, 7" WINGS, UNVERFERTH ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 7" wings. Available for 3/4" shanks. Will fit Unverferth 112, 122, 132 Zone-Builders.
DISC ASSEMBLY, 204/205B, 14" X 4.5MM TRAILING, FDN
Disc opener TRAILING assembly, 14" diameter x 4.5mm thick. Includes blade, 204/205 hybrid bearing and hub. Will fit 800, 900, 1200 series planters; 5400, 5500 soybean special drills.
DISC ASSEMBLY, SMOOTH, GP, 15", BOX OF 2
Drill disc assembly, Great Plains HD, 15 and 25 series drills. Yield Pro Planters. Replaces Great Plains 404-072S and 404-121S.
Disc opener assembly, 18" diameter x 5mm thick. Forges De Niaux (FDN) blade with 3 zones of hardness. Will fit John Deere 750, 1560, 1565, 1590, 1690, 1835, 1850, 1860, 1890, 1895 and 1990 drills.
GAUGE WHEEL ARM, JD 1700 MAXEMERGE PLUS, PRO
Gauge wheel arm mounts to planter with 100mm long bolt. Gauge wheel mounts to arm with set screw. Includes 1 arm, threaded bushing and mounting hardware. Replacement self-aligning bushing is PLT154179. Fits John Deere 1700 Series MaxEmerge Plus and Pro row units. Two required per row.
KEETON, QUICK ATTACH, WHITE 9000, STANDARD TAIL
Keeton Seed Firmer, Standard Tail with single liquid tube, Quick Attach. Fits White 9000 series row units. Mounts to seed disc opener shafts and lower seed tube pin.
KNIFE ASSEMBLY & KNFHD, JD 222, 922, 11SPI
OEM 22-foot sectional knife assembly with fine tooth sections (11-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 35', 7SPI
OEM 35-foot sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16 RID, SET SCREW
MudSmith wheel with 4.5" x 16" reduced inner diameter (RID) tire with set screw style bearing. Will fit John Deere and White planters with set screw style bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
OEM SECTION, JD 4", PLATED, 14SPI, BOX OF 25
Box of 25, John Deere 4" fine sections (14-SPI) with zinc plating finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600, 700 flex draper with 4" cutting system. Fine sections are recommended for wheat and grasses.
P/D KIT, JD 200,900 FLEX, W/240 M16, JD
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 16mm clevis. Also available for JD Flex 8820 with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/240 M16, SCH
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 16mm clevis. Also available for JD Flex 8820 with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, CIH 2062; MACDON 872, 873 W/ 11" AUGER DRUM, SINGLE
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH 3020, 3162, NH 740CF
Case-IH 3020, 3162 and New Holland 740CF poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, SINGLE
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 200, 900, SINGLE
John Deere 200/900 poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600FD, 600D, 700FD, 700D, RDF, SINGLE
John Deere 600FD, 600D, 700FD, 700D, RDF series single poly finger only. Guide kit and hardware NOT included.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 3/8", (2012)
40' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 3/8", (2013/2014)
40' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 3/8", (2015)
40' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, NH 973/73C, 22', PRE-DRILLED 1/4"
22 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 17.5', PRE-DRILLED, 3/8"
17.5 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 16', PRE-DRILLED, 3/8"
16 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, END SKID SHOE, RH, 3 X 14.5 X 3/8
John Deere 600F Right End Skid Shoe - 3" x 14.5" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, END SKID SHOE, RH, 11.375 X 34.75 X 3/8
John Deere 600FD Right End Skid Shoe - 11.625" x 34.75" - Yellow - 3/8" - Predrilled.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, POPCORN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. This finger set is designed for popcorn; the fingers are one-half the width of a standard corn finger.
PRECISION METER, JD 7200, 1700, 12F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series. Recommended for 30" or greater row spacing.
Steel wheel, 12.5" in diameter with razor shaped points, 3-bolt and 4-bolt pattern. Right hand on row cleaner & Left hand on closing wheels.
SCH 17MM 3-PT GUARD, (LONG II)
SCH EasyCut II long 17mm 3-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
Fits SCH EasyCut systems installed on CaseIH, 820 & 1020. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM OPEN TOP GUARD, (SHORT II)
SCH EasyCut II short 17mm 2-point open top guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
Fits SCH EasyCut system installed on John Deere 50, 250, 350 and 450, Bearing Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH 3 hole, 6mm wear plate. Black in color.
SCHUCK 750 RT HITCH, 5-1/2" DROP, 2-1/2" RT
The Model 750-RT is a designed to fit 2-1/2 inch receiver tubes, includes pin. This hitch has a 5.5 inch drop from the pin hole in the receiver tube to the top of the tongue. Tongue height should be 16 to 18 inches off the ground. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCRAPER KIT, CIH 800-1200 SERIES, OUTSIDE
Fits Case-IH 800-1200 series planters. Includes right and left hand scrapers and brackets. Replaces factory brackets. Two-piece design; outside scraper. No modifications or holes to drill.
SCRAPER KIT, GREAT PLAINS, 00HD OPENER
Fits Great Plains drills with 00HD openers. Each set includes a mounting bracket, left and right scrapers, and all mounting hardware. The scrapers are spring loaded and the spring is included in the set.
SEED BOOT, JD 1560, 1565, 1860, TOP LH
Seed Boot, for John Deere 1560, 1565 & 1860 - Top Left Hand
SEED DISK, ESET, SPECIALTY, .155"
Replacement 30-hole eSet seed disk for large sweet corn and speciality crops.
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 12 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 12 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 16 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 23 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 24 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 31 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 48 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 54 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 54 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 6 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, DUAL VALVE, 8 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 32 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and no directional valves. This setup offers the best control by allowing you to set separate air psi to both sides of the piston. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, BIDIRECTIONAL, STD FLOW, 36 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 36 row planter. Includes electronic controller, standard flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART PAN PLUS AIR SEPARATOR, 60", DUAL
60" Smart Pan plus Air Separator. If you are a fan of windrowing straw when checking your grain loss and want to catch a sample from the entire width of your sieves then this is the fit for you. Includes Air Separator for cleaning the sample within seconds. It can also be used to quickly cool down heated grain from the dryer so you can get an accurate moisture reading.
STALK STOMPERS, G4, AGCO, 6R, W/O TOOLBAR, 12" SHOE
6 Row - AGCO (without toolbar) G4 with 12" shoes. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Capello Diamant (without toolbar), G4 with 12" shoes.
STALK STOMPERS, G4, CAPELLO QUASAR, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Capello Quasar (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
4 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For rows (3-7) on a 8 row cornhead and rows (5-8) on a 12 row cornhead.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, CIH 900, 1000, 6R, W/O TOOLBAR, 12" SHOE (6 ROW CORNHEAD)
6 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
STALK STOMPERS, G4, CIH 900, 1000, 6R, W/O TOOLBAR, 12" SHOE (8 ROW CORNHEAD)
8 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
STALK STOMPERS, G4, DRAGO GT SERIES, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. NOTE: Series II 6 row heads require MYW041958 offset brackets.
STALK STOMPERS, G4, FANTINI, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Fantini (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Harvestec 5000 and 6000 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 600/700, 6R, W/O TOOLBAR, 12" SHOE
6 Row - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 6R, W/O TOOLBAR, 12" SHOE
6 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 6R, W/O TOOLBAR, 12" SHOE
6 Row - Lexion (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, MACDON C-SERIES, 8R, W/O TOOLBAR, 12" SHOE
8 Row - MacDon C-Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
TRAIL-JET, CIH 800, 900 SERIES, DUAL
Dual Trail Jet Fertilizer Opener for a Case-IH 800 and Case-IH 900 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, JD 1700 SERIES MAXEMERGE PLUS, DUAL
Dual Trail Jet Fertilizer Opener for a John Deere 1700 series with MaxEmerge Plus row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-Shot Insert. Fits John Deere MaxEmerge 2, MaxEmerge Plus and MaxEmerge Pro. Also fits John Deere 1530 and early 1535 drills.
This is our 60 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
13" SPIKED WHEEL ONLY, 6-BOLT, LH
Steel Wheel, for Kinze, 13" diameter with diamond shaped points, 6-Bolt pattern. Left Hand on row cleaner & Right Hand on closing wheels. Note: 13" wheels should be replaced when 12" or less.
Fast, Effective Sample Cleaning. This allows you to clean your sample within seconds compared to minutes wasted in the field. It blows the chaff and straw away from your grain kernels. The Air Separator is also a great tool to quickly cool down heated grain from the dryer so you can get an accurate moisture reading in short order.
AUGER TROUGH LINER, JD 200, 900, 18-20', (58" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 18'-20' and 58" throat opening. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included with kit.
BIG SHOT MAXIM, 128 OZ, SINGLE
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 1 x 128oz bottle.
For Case-IH planter with folding markers and round shaft.
DISC ASSEMBLY, 205B, 15" X 4.5MM, FDN
Disc opener assembly, 15" diameter x 4.5mm thick. Includes blade, double 205 bearing and hub. Will fit Case-IH 2100 series planters.
Disc opener assembly, 18" diameter x 5mm thick. Celsan blade with single heat treat. Will fit John Deere 750, 1560, 1565, 1590, 1690, 1835, 1850, 1860, 1890, 1895 and 1990 drills.
Drill disc blade, John Deere. Will fit John Deere 450, 455, 515, 520, 1520, 8100, 8200, 8250, 8300, 8350, 9400 and 9450 conventional drills. Will also fit John Deere 730, 770, 780 and 1060 air seeders.
GUIDE KIT, JD 200, 900, 600F, 600R, SINGLE
Guide with hardware included. John Deere 200, 900, 600F and 600R.
KEETON, QUICK ATTACH, KINZE 3000, LP TAIL
Keeton Quick Attach wrap around bracket and low profile tail with single liquid tube. Mounts to seed disc opener shafts and lower seed tube pin. For use with Quick Attach firmer tails only. Fits Kinze 3000 series planters with SpeedTube, WaveVision, Bullseye or "Small" seed tubes. Does NOT fit Kinze 3000 series planters with "Large" seed tubes such as EdgeVac and 2013 & newer mechanical meter planters.
KNIFE ASSEMBLY & KNFHD, JD 224, 924, 7SPI
OEM 24-foot sectional knife assembly with coarse tooth sections (7-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 40', 14SPI
OEM 40-foot sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
OEM 35-foot sectional knife assembly with coarse tooth sections (7-SPI) for John Deere 635 auger platform with 4" cutting system. Hardware is included. Does NOT include the RSP002559 knifehead. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, JD 635FD, 735FD, DD, LH, 7SPI
OEM 17.5-foot LEFT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 635FD, 735FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16, SET SCREW
MudSmith wheel with 3" x 16" standard tire with set screw style bearing. Will fit John Deere and White planters with set screw style bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
P/D KIT, JD 200,900 RIGID, W/230, JD
SCH Pro-Drive Kit available for JD Rigid 4420, 6620 and 7720 through 1985. Also available for JD Rigid 9000 series.
P/D KIT, JD 200,900 RIGID, W/230, SCH
SCH Pro-Drive Kit available for JD Rigid 4420, 6620 and 7720 through 1985. Also available for JD Rigid 9000 series.
POLY FINGER KIT, CIH 2020 (before serial #CBJ020701), NH 73C, 74C (before serial #PNL01781), SINGLE
Case-IH 2020 (before serail #CBJ020701) and New Holland 73C, 74C (before serial #PNL01781) poly finger kit. Guide kit and hardware included.
POLY KIT, 45', JD 645FD, PRE-DRILLED, 1/4", (2015)
45' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, NH 973/73C, 24', PRE-DRILLED 1/4"
24 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit
POLY KIT, YELLOW, JD 200, 900, PRE-DRILLED, 18' X 1/4"
18 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, LH, 11.5 X 8 X 1/4
John Deere 600F Left Inside Skid Shoe - 11.5" x 8" - Yellow - 1/4"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015), 5.5 X 4.3 X 1/4
John Deere 600FD (2015) Center Skid Shoe - 5.5" x 4.3" - Yellow - 1/4"- Predrilled.
PRECISION METER, JD 7200, 1700, 6F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series. Recommended for 15-20" row spacing.
SCH 12MM 3-PT GUARD, (SHORT II)
SCH EasyCut II short 12mm 3-point guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM CENTER GUARD, (LONG II)
SCH EasyCut II long 12mm 2-point center guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM CENTER GUARD, (STD II)
Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 12mm guards are black in color, with a 2 stamped on the bottom. Agco part#71443949
Half section for the SCH Knife.
Fits SCH EasyCut system installed on John Deere 900 series draper, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH 4 hole, 4mm wear plate. Brown in color.
The Model 750 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
Fits Case-IH 620, 6200 grain drills. Each kit includes: 1 right scraper, 1 left scraper, bolt, spring, nut & washer.
SCRAPER KIT, CIH 800, 900 SERIES, INSIDE, LEFT
Fits left leading disk on Case-IH 955 and 1200 series planters. The Case IH scraper fits inside the offset planting disks, keeping soil out of the way so the disks can continue rolling freely.
SEED BOOT, JD 1560, 1565, 1860, BOTTOM RH
Seed Boot, for John Deere 1560, 1565 & 1860 - Bottom Right Hand
SEED DISK, ESET, MALE CORN, .155"
Replacement 45-hole eSet seed disk for male corn rows increase the planting rate.
Self Aligning Bushing. Inside diameter is 16mm (5/8"). Used in PLT006614, PLT079648 and PLT054179. Fits John Deere late MaxEmerge 2; all MaxEmerge Plus, Pro, XP, and XP Pro.
Individual replacement Long Tooth flat slat. Used in Long Tooth chaffers and sieves.
SMART CLEAN KIT, GANG CONTROL, 12 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 12 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 16 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 23 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 24 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 31 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 32 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 36 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 36 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 48 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 54 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 54 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 6 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 8 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Row cleaner mounting bracket sold separately.
STALK STOMPERS, G4, AGCO, 8R, W/ TOOLBAR, 12" SHOE
- AGCO (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Capello Diamant (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CAPELLO QUASAR, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Capello Quasar (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
6 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
6 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For all rows on a 8 row cornhead except 1 and 8. For all rows on a 12 row cornhead except rows (1-3) and (10-12). To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 900, 1000, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Case-IH 900, 1000 series (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, FANTINI, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Fantini (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Harvestec 5000 and 6000 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 6R, W/ TOOLBAR, 12" SHOE
6 Row Kit (4 Outer Rows & 2 Inner Rows) - John Deere 40/90 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 8R, W/ TOOLBAR, 12" SHOE
8 Row - John Deere 600/700 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 8R, W/ TOOLBAR, 12" SHOE
8 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 8R, W/ TOOLBAR, 12" SHOE
8 Row - Lexion (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, MACDON C-SERIES, 12R, W/ TOOLBAR, 12" SHOE
12 Row - MacDon C-Series ( toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
Trail Jet Fertilizer Opener for a John Deere 1700 series with MaxEmerge XP row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
This is our 80 ft. sprayer boom kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
13" SPIKED WHEEL ONLY, 6-BOLT, RH
Steel Wheel, for Kinze, 13" diameter with diamond shaped points, 6-Bolt pattern. Right Hand on row cleaner & Left Hand on closing wheels. Note: 13" wheels should be replaced when 12" or less.
AUGER TROUGH LINER, JD 200, 900, 18-20', (46" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 18'-20' and 46" throat opening. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included with kit.
BIG SHOT MAXIM, 128 OZ, CASE OF 4
Big Shot Maxim, insect control, a high quality organically grown botanical mosquito and agricultural pest control solution that works. Contains 4 x 128oz bottles.
For Case-IH planter with non-folding markers and with flat plate.
CLEAN SWEEP BRACKET, WA1360, BD, BK, BW, BCIH
Mounts the Clean Sweep cylinder to the row cleaner. For Martin 1360 without no-till coulter. Will fit John Deere 7000, 7200 and 1700 series; Kinze; White 6000 and 8000 series. NOTE: 1 required per row.
Disc opener assembly, 18" diameter x 3.5mm thick. Will fit 500, 500T drills; New Holland P2080, P2085. Will NOT fit SDX series.
DISC BLADE, JD 50, 60, 90 SERIES, 18"
Drill disc blade, John Deere. Will fit John Deere 750, 1560, 1590, 1850, 1860, 1890, 1895 and 1990. Replaces John Deere N214190 and N283804.
Twisted Drag chain kit. Fits all John Deere MaxEmerge units, Kinze & White units with bolt on closing wheels. Kinze units with roll pin attached closing wheels will need holes drilled for mounting.
KEETON, QUICK ATTACH, KINZE 3000, STANDARD TAIL
Keeton Quick Attach wrap around bracket and standard tail with single liquid tube. Mounts to seed disc opener shafts and lower seed tube pin. For use with Quick Attach firmer tails only. Fits Kinze 3000 series planters with SpeedTube, WaveVision, Bullseye or "Small" seed tubes. Does NOT fit Kinze 3000 series planters with "Large" seed tubes such as EdgeVac and 2013 & newer mechanical meter planters.
KEETON, UNIVERSAL BRKT, DUAL TUBE TAIL
Keeton Seed Firmer, Dual Tube Tail with Universal Bracket. Mounts to seed disc opener bolts and around row unit shank. Will fit all John Deere except John Deere except MaxEmerge 5 (requires modifications) and ExactEmerge; White 6000, 8000, 9000 series.
KNIFE ASSEMBLY & KNFHD, JD 224, 924, 11SPI
OEM 18-foot sectional knife assembly with fine tooth sections (11-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 40', 7SPI
OEM 40-foot sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
OEM 35-foot sectional knife assembly with fine tooth sections (14-SPI) for John Deere 635 auger platform with 4" cutting system. Hardware is included. Does NOT include the RSP002559 knifehead. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, JD 635FD, 735FD, DD, RH, 7SPI
OEM 17.5-foot RIGHT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 635FD, 735FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16 RID, SET SCREW
MudSmith wheel with 3" x 16" reduced inner diameter (RID) tire with set screw style bearing. Will fit John Deere and White planters with set screw style bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
OEM SECTION, JD 4", UNPLATED, 14SPI, BOX OF 25
Box of 25, John Deere 4" fine sections (14-SPI) with an oil finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600, 700 flex draper with 4" cutting system. Fine sections are recommended for wheat and grasses.
P/D KIT, JD 200,900 RIGID, W/240, JD
SCH Pro-Drive Kit available for JD Rigid 6620 & 7720 after 1985. Also available for JD Rigid 8820.
P/D KIT, JD 200,900 RIGID, W/240, SCH
SCH Pro-Drive Kit available for JD Rigid 6620 & 7720 after 1985. Also available for JD Rigid 8820.
POLY FINGER KIT, CIH 2020 (serial #CBJ020701 & later), NH 74C (serial #PNL01781 & later), SINGLE
Case-IH 2020 (serial #CBJ020701 & later) and NH 74C (serial #PNL01781 & later) poly finger kit. Guide kit and hardware included.
POLY KIT, 45', JD 645FD, PRE-DRILLED, 3/8", (2015)
45' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
25 Ft. Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 20', PRE-DRILLED 3/8"
20 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 18', PRE-DRILLED, 3/8"
18 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, LH, 11.5 X 8 X 3/8
John Deere 600F Left Inside Skid Shoe - 11.5" x 8" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015), 5.5 X 4.3 X 3/8
John Deere 600FD (2015) Center Skid Shoe - 5.5" x 4.3" - Yellow - 3/8"- Predrilled.
PRECISION METER, JD 7200, 1700, 12F, SWEET CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series.
SCH 14MM 3-PT GUARD, (SHORT II)
SCH EasyCut II short 14mm 3-point guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM CENTER GUARD, (LONG II)
SCH EasyCut II long 14mm 2-point center guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM CENTER GUARD, (STD II)
Fits SCH EasyCut systems. This center guard is used only on Double Drive platforms. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
Fits SCH EasyCut system installed on John Deere 800 and 1214. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH 4 hole, 5mm wear plate. Blue in color.
SCRAPER KIT, CIH 800, 900 SERIES, INSIDE, RIGHT
Fits right leading disk on Case-IH 955 and 1200 series planters. The Case IH scraper fits inside the offset planting disks, keeping soil out of the way so the disks can continue rolling freely.
Fits left side opener on Case-IH 5400, 5400 grain drills.
SEED BOOT, JD 1560, 1565, 1860, BOTTOM LH
Seed Boot, for John Deere 1560, 1565 & 1860 - Bottom Left Hand
SEED DISK, ESET, SORGHUM, LARGE SUGAR BEET, .088"
Replacement 60-hole eSet seed disk (anti-static) for sorghum/milo and large sugar beets; 13,000 - 15,000 seeds per pound. For sorghum, requires purchase of speciality extractor (PPM720117) and deflector cover tube (PPM720281). For sugar beets, requires purchase of speciality singulator (PPM720386), speciality extractor (PPM720117) and deflector cover tube (PPM720281).
SLAT, FLAT, SHORT, 28", SINGLE
Individual replacement Short Tooth flat slat. Used in Short Tooth chaffers and sieves.
SMART CLEAN KIT, GANG CONTROL, 12 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 12 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 16 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 23 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 24 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 31 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 32 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 36 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 36 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 48 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 54 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 54 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 6 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, GANG CONTROL, 8 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 2 directional valves. This set up allows control of each section independently, whether you want section control for left right or front gang rear gang. Compressor NOT included. Row cleaner mounting bracket sold separately.
STALK STOMPERS, G4, AGCO, 8R, W/O TOOLBAR, 12" SHOE
8 Row - AGCO (without toolbar) G4 with 12" shoes. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Capello Diamant (without toolbar), G4 with 12" shoes.
STALK STOMPERS, G4, CAPELLO QUASAR, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Capello Quasar (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
6 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 6 row cornheads.
6 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For all rows on a 8 row cornhead except 1 and 8. For all rows on a 12 row cornhead except rows (1-3) and (10-12).
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, CIH 900, 1000, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Case-IH 900, 1000 series (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, DRAGO GT SERIES, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, FANTINI, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Fantini (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 8R, W/O TOOLBAR, 12" SHOE
Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, HARVESTEC 5000, 6000, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Harvestec 5000 and 6000 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 6R, W/O TOOLBAR, 12" SHOE
6 Row Kit (4 Outer Rows & 2 Inner Rows) - John Deere 40/90 series (without toolbar), G4 with 12" shoes. G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 8R, W/O TOOLBAR, 12" SHOE
8 Row - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 8R, W/O TOOLBAR, 12" SHOE
8 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 8R, W/O TOOLBAR, 12" SHOE
8 Row - Lexion (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, MACDON C-SERIES, 12R, W/O TOOLBAR, 12" SHOE
12 Row - MacDon C-Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
TRAIL-JET, JD MAXEMERGE XP, DUAL
Dual Trail Jet Fertilizer Opener for a John Deere 1700 series with MaxEmerge XP row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-SLICE INSERT, JD XP, XP PRO, ME5
V-Slice Insert. Fits John Deere XP, XP Pro and MaxEmerge 5 row units.
This is our 90 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
AUGER TROUGH LINER, JD 200, 900, 13-16', (58" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 13'-16' and 58" throat opening. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included with kit.
KEETON, UNIVERSAL BRKT, DRY TAIL
Keeton Seed Firmer, Dry Tail with Universal Bracket. Mounts to seed disc opener bolts and around row unit shank. Will fit all John Deere except John Deere except MaxEmerge 5 (requires modifications) and ExactEmerge; White 6000, 8000, 9000 series.
KNIFE ASSEMBLY & KNFHD, JD 225, 925, 7SPI
OEM 25-foot sectional knife assembly with coarse tooth sections (7-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 45', 14SPI
OEM 45-foot sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 635FD, 735FD, DD, LH, 14SPI
OEM 17.5-foot LEFT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 635FD, 735FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16, 5/8"
MudSmith wheel with 4.5" x 16" standard tire with 5/8" bearing. Will fit Great Plains, John Deere, Kinze, Monosem and White planters with 5/8" bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
OEM SECTION, NH, 7SPI, BOX OF 25
Box of 25, New Holland coarse section, 7 serrations per inch. Replaces New Holland 848091.
30 Ft. Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, 900, PRE-DRILLED, 20' X 1/4"
20 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, RH, 9.5 X 14.5 X 1/4
John Deere 600F Right Inside Skid Shoe - 9.5" x 14.5" - Yellow - 1/4"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015), 5.7 X 10 X 1/4
John Deere 600FD (2015) Center Skid Shoe - 5.7" x 10" - Yellow - 1/4"- Predrilled.
Steel Wheel, 12.5" diameter with razor shaped points, 6-bolt pattern. Left hand on row cleaners and Right hand on closing wheels.
SCH 17MM 3-PT GUARD, (SHORT II)
SCH EasyCut II short 17mm 3-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM CENTER GUARD, (LONG II)
SCH EasyCut II long 17mm 2-point center guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH KNFHD, JD MO-CO (BUSHING) LH
Fits SCH EasyCut system installed on John Deere 130, 300, 1207, 1209, 1219, 1380 and 1424, Left Hand Knifehead. This is a busing style knifehead that will fit serial #285000-. Knifehead hardware package, SCP083601, not included.
SCH 4 hole, 6mm wear plate. Black in color.
SCRAPER KIT, JD 7200, 1700 W/O CAST SHANK, INSIDE
Installs inside the double disk openers. Fits John Deere 7200, 7300 series and 1700 series without a cast shank. Installs in the slotted hole of the stiffener brace that is welded in between the frame. Can be installed on a John Deere 1700 series with cast shank but a hole will need to be drilled in the row unit cross brace.
Fits right side opener on Case-IH 5400, 5400 grain drills.
SEED DISK, ESET, CHILI, CUCUMBER, SMALL SUGAR BEET, .062"
Replacement 60-hole eSet seed disk (anti-static) for chili, 12 seeds/foot in 30" rows; cucumber; small sugar beets, 15,000 - 18,000 seeds per pound. Requires purchase of speciality singulator (PPM720386), speciality extractor (PPM720117) and deflector cover tube (PPM720281).
Self Aligning Bushing. 1" (25.4mm) inside diameter. Used in PLT041968 pivot arm kits. Fits John Deere 7200, 7300 and early 1760 and 1780 MaxEmerge 2 row units. Also fits Kinze 2000 series, 1993-1999.
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 12 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 12 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 16 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 23 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 24 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 36 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 36 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 48 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 54 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 54 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 8 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 31 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 32 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 6 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
STALK STOMPERS, G4, AGCO, 12R, W/ TOOLBAR, 12" SHOE
12 Row - AGCO (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Capello Diamant (toolbar mount), G4 with 12" shoes. ONLY compatible with rigid cornhead. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CAPELLO QUASAR, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Capello Quasar (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
6 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For all rows on a 8 row cornhead except 4 and 5. For all rows on a 12 row cornhead except rows (1-2, (4-5) and (11-12). No coverage under the feederhouse. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 12R (folding head), W/ TOOLBAR, 12" SHOE
12 Row Folding Head - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 8R (folding head), W/ TOOLBAR, 12" SHOE
8 Row (folding head) - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 12R (20", 22", 30" spacing), W/ TOOLBAR, 12" SHOE
12 Row (20", 22" and 30" spacing) - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, FANTINI, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Fantini (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 6R, W/ TOOLBAR, 12" SHOE
6 Row Kit (6 Outer Rows) - John Deere 40/90 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD C-SERIES, 12R, W/ TOOLBAR, 12" SHOE
12 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Lexion (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
TIRE, GAUGE WHEEL, RID, NON-XP
Will fit existing John Deere MaxEmerge 2, MaxEmerge Plus, Pro; 1530, 1535 with MaxEmerge Plus; Kinze; White 5100, 5700, 6000, 8000 planter rims and John Deere 750, 1560, 1590, 1850, 1860, 1890, and rear two gangs of 1895 drills. Allows seed trench to lift and fracture. Not recommended for use in worked ground.
TRAIL-JET, JD 1700 MAXEMERGE XP PRO
Trail Jet Fertilizer Opener for a John Deere 1700 series with Pro-Series XP row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-Slice Insert. Fits Kinze 3000 series. Includes special socket-head cap screws with Loctite.
WEED WIPER, SPRAYER BOOM, 100'
This is our 100 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
MagnoJet, 100 Mesh nozzle body Filter. Preferably sold in package quantity of 10.
13" SPIKED CLOSING WHEEL, JD 750, 1850, RH
Drill Spading Closing Wheel, Right hand, single spiked closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4R)
AUGER TROUGH LINER, JD 200, 900, 13-16', (46" CENTER PANEL)
John Deere 200, 900 series Auger Trough Liner. Available for 13'-16' and 46" throat opening. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included with kit.
BEARING W/ SLEEVE, GAUGE WHEEL, ROLL PIN
Bearing for roll pin style gauge wheels with steel wheel halves. Fits John Deere MaxEmerge, MaxEmerge 2 prior to 1992; Kinze prior to 1993; Case 800, 900 and 1200 series to S/N CBJ0001610.
BELT METER KIT, CIH 5400 15' 7"
Belt Meter Kit. Fits Case-IH drill model 5400 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5500 30' 7"
Belt Meter Kit. Fits Case-IH drill model 5500 30' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1200 12' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1210 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1510 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2000 20' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2010 20' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2400 24' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2410 24' 7.5"
Belt Meter Kit. Fits Great Plains drill model 2410 24' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3010 30' 7.5"
Belt Meter Kit. Fits Great Plains drill model 3010 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD12 12' 6"
Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD15 15' 7"
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD20 20' 7.5"
Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GPSS'87 30' 7.5"
Belt Meter Kit. Fits Great Plains drill model SS'87 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1520 15' 7.5"
Belt Meter Kit. Fits John Deere drill model 1520 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1560 15' 7.5"
Belt Meter Kit. Fits John Deere drill model 1560 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 15' 7.5"
Belt Meter Kit. Fits John Deere drill model 1590 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
Belt Meter Kit. Fits John Deere drill model 455 25' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 15' 7.5"
Belt Meter Kit. Fits John Deere drill model 750 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
C125 BRACKET, JD 7000, KINZE, WHITE, 24-3/4"
Will fit John Deere 7000, 7100; Kinze 2000, 3000; White EARLY 6000 series with a no-till coulter to mount the C125 floating row cleaner assembly. (Will NOT fit Kinze OEM double arm no-till coulter.) Requires 24-3/4" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
CAP, SHORT, BD, AD, ADGA BLACK
MagnoJet, Cap for Standard Flat Fan Nozzles. Fits MagnoJet nozzles starting with MNJ20XXXX & MNJ22XXXX. Also fits TeeJet TP, XR, DG, TT, TTJ60, AIXR & OC Series tips. Also fits Hypro ULD, GA, LD, VP, TR, OC, R & E Series tips. Rubber seal sold separately.
CLOSING WHEEL BRACKET, JD 7000, 7100, ROLL PIN
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts roll pin style closing wheels.
KEETON, JD 1560, 1590, 1690, 1860, 1890, 1990
Keeton Seed Firmer, Standard Liquid Tail. Mounts to back of T-handle slotted bracket. Fits John Deere drill models 1560, 1590, 1690, 1860, 1890 & 1990. Includes standard liquid tail and all necessary hardware. Note: The press wheel arm and spring is removed and will not be used.
Keeton Seed Firmer, Standard Liquid Tail. Mounts to seed disk scraper. Fits John Deere drill models 450, 455 & 1520. Includes standard liquid tail and all necessary hardware.
Keeton Seed Firmer, Standard Liquid Tail. Mounts to seed disk scraper. Fits John Deere drill models 750 & 1850. Includes standard liquid tail and all necessary hardware.
KEETON, UNIVERSAL BRKT, SHORT LP TAIL
Keeton Seed Firmer, Short Low Profile Tail with Universal Bracket. Mounts to seed disc opener bolts and around row unit shank. Will fit all John Deere except MaxEmerge 5 (requires modifications) and ExactEmerge; White 6000, 8000, 9000 series.
KNIFE ASSEMBLY & KNFHD, JD 225, 925, 11SPI
OEM 25-foot sectional knife assembly with fine tooth sections (11-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 45', 7SPI
OEM 45-foot sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 635FD, 735FD, DD, RH, 14SPI
OEM 17.5-foot RIGHT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 635FD, 735FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
LOCKEASE HITCH PIN, 5/8" X 4-1/2"
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
MOUNT, WA1345, WA1360, JD 7000, KINZE, WHITE, W/SINGLE UMO
Will fit John Deere 7000, 7100; Kinze 2000, 3000 series; White 6000, 8000 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner and UMO-100 fertilizer opener. Requires 25" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16 RID, 5/8"
MudSmith wheel with 4.5" x 16" reduced inner diameter (RID) tire with 5/8" bearing. Will fit Great Plains, John Deere, Kinze, Monosem and White planters with 5/8" bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
OEM SECTION, NH, 11SPI, BOX OF 25
Box of 25, New Holland fine section, 11 serrations per inch. Replaces New Holland 848091.
POLY KIT, SILVER, CIH 1020, 22.5', PRE-DRILLED 3/8"
22.5 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 20', PRE-DRILLED, 3/8"
20 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, PRE-DRILLED, 22' X 1/4"
22 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, RH, 9.5 X 14.5 X 3/8
John Deere 600F Right Inside Skid Shoe - 9.5" x 14.5" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015, 5.7 X 10 X 3/8)
John Deere 600FD (2015) Center Skid Shoe - 5.7" x10" - Yellow - 3/8"- Predrilled.
Steel Wheel, 12.5" diameter with razor shaped points, 6-bolt pattern. Right hand on row cleaners and Left hand on closing wheels.
SCH 12MM CENTER GUARD, (SHORT II)
SCH EasyCut II short 12mm 2-point center guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM OPEN TOP GUARD, (LONG II)
SCH EasyCut II long 12mm 2-point open top guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH KNFHD, JD MO-CO (BUSHING) RH
Fits SCH EasyCut system installed on John Deere 300, Right Hand Knifehead. This is a busing style knifehead that will fit serial #285000-. Knifehead hardware package, SCP083601, not included.
SCRAPER KIT, JD 1700 W/CAST SHANK, INSIDE
Installs inside the double disk openers. Fits John Deere 1700 series with a cast shank. Installs by clamping on the stiffener brace between the two sides.
SCRAPER KIT, JD 455, 730, 1060, 8300, 9350
Fits John Deere 455, 730, 1060, 8300 and 9350 grain drills. Attaches directly onto the boot. This scraper is galvanized and doesn't require painting. Each kit includes: 1 left scraper, 1 right scraper, T-Bolt, spring, nut & washer.
SEED DISK, ESET, COTTON, .100"
Replacement 60-hole eSet seed disk for cotton; 50,000 to 60,000 population. Requires purchase of speciality extractor (PPM720117).
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 12 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 12 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 23 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 24 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 36 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 36 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 48 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 54 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 54 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 8 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 31 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 32 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 6 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
ST 13501 ORANGE, TURBO FLAT FAN
MagnoJet, ST 135 Degree 01 Orange, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
STALK STOMPERS, G4, AGCO, 12R, W/O TOOLBAR, 12" SHOE
12 Row - AGCO (without toolbar) G4 with 12" shoes. NOTE: Header Bracket accommodates 4" - 5" main beam. Toolbar configuration based on 30" rows: kits will accommodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit Massey Ferguson 3000, Gleaner 3000 and Challenger.
STALK STOMPERS, G4, CAPELLO DIAMANT, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Capello Diamant (without toolbar), G4 with 12" shoes. ONLY compatible with rigid cornhead.
STALK STOMPERS, G4, CAPELLO QUASAR, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Capello Quasar (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
6 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For all rows on a 8 row cornhead except 4 and 5. For all rows on a 12 row cornhead except rows (1-2, (4-5) and (11-12). No coverage under the feederhouse.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 12R (folding head), W/O TOOLBAR, 12" SHOE
12 Row Folding Head - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, DRAGO GT SERIES, 8R (folding head), W/O TOOLBAR, 12" SHOE
8 Row (folding head) - Drago GT Series (without toolbar), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 12R (20", 22", 30" spacing), W/O TOOLBAR, 12" SHOE
12 Row (20", 22" and 30" spacing) - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, FANTINI, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Fantini (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 6R, W/O TOOLBAR, 12" SHOE
6 Row Kit (6 Outer Rows) - John Deere 40/90 series (without toolbar), G4 with 12" shoes. G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD C-SERIES, 12R, W/O TOOLBAR, 12" SHOE
12 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Lexion (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
A seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/double. The new SureFire cupped seed belt releases seed down the center every time for sure spacing and more ears. Fits finger pick up meters for Precision Planting; John Deere MaxEmerge, MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5; Kinze.
TRAIL-JET, JD 1700 MAXEMERGE XP PRO, DUAL
Dual Trail Jet Fertilizer Opener for a John Deere 1700 series with Pro-Series XP row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-Shot Insert. Fits Kinze 3000 series. Standard V-Shot is 3/8" below seed.
9" SPIKED CLOSING WHEEL KIT, CIH, JD, KINZE
Planter Closing Wheels, includes a set of two 9" spiked closing wheels for Case-IH 800, 900, 1200, and 1300 Series Early Riser row units and Soybean Special grain drills with offset closing wheel arm. Replaces the smooth inverted closing disks. Also, fits John Deere and Kinze planters with shallow closing systems. In wet conditions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they rotate up and out of the soil.
BELT METER KIT, GP3PD15 15' 7" W/MARKERS
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
GAUGE WHEEL ARM, KINZE 2000 SERIES, 1993-1999
Gauge wheel mounts to arm with bolt. Gauge wheel arm mounts to planter on a 1" diameter pin. Includes 1 arm and threaded bushing. Fits Kinze 2000 series row units, 1993-1999.
Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper housing. Fits Case-IH drill models 5100 & 5400. Includes standard liquid tail and all necessary hardware.
KEETON, GP 10/20 PRECISION SERIES
Keeton Seed Firmer,Narrow Liquid Tail. Mounts to scraper bracket. Fits All Precision drills (singulating & volumetric metering wheel): 1510P (3 pt), 1520P (3 pt), 2010P (3 pt), 2020P (3 pt), 2410P (3 pt), 2420P (3 pt), 2520P (3 pt), 3N-3010P, 3N-3020P, 3N-4010P and 3N-4020P. Includes narrow liquid tail and all necessary hardware.
Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper bracket. Fits fluted metering wheel drills: 00 Series, 05 Series, 06 series, 10 Series and 20 Series (-2003). Includes standard liquid tail and all necessary hardware.
Keeton Seed Firmer, Dry Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series. (Will not work with rotary disk scrapers). Compatible with WaveVision Seed Tube.
KNIFE ASSEMBLY & KNFHD, JD 230, 930, 7SPI
OEM 30-foot sectional knife assembly with coarse tooth sections (7-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 12.5', 7SPI
OEM 12.5-foot LEFT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 640FD, 740FD, DD, LH, 7SPI
OEM 20-foot LEFT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 640FD, 740FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16, 5/8"
MudSmith wheel with 3" x 16" standard tire with 5/8" bearing. Will fit Great Plains, John Deere, Kinze, Monosem and White planters with 5/8" bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
OEM SECTION, CIH, 9SPI, BOX OF 25
Box of 25, Case-IH section, 9 serrations per inch. Fits Case-IH 820, 1010, 1020, 2010 and 2020 plaftorms.
POLY KIT, YELLOW JD 900, 22', PRE-DRILLED, 3/8"
22 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, PRE-DRILLED, 22' X 1/4"
22 Ft. JD 200F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
SCH 14MM CENTER GUARD, (SHORT II)
SCH EasyCut II short 14mm 2-point center guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM OPEN TOP GUARD, (LONG II)
SCH EasyCut II long 14mm 2-point open top guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM OPEN TOP GUARD, (STD II)
Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH KNFHD, JD, MACDON, MO-CO (NEEDLE) LH
Fits SCH EasyCut system installed on John Deere 130, 160, 230, 300, 710, 720, 820, 890, 895, 1207, 1209, 1219, 1380, 1424, 1600, 2280, 2320 and 2420 needle bearing style. Will also fit MacDon 920, LH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCRAPER KIT, WHITE 6000, 8000 SERIES
Fits White 6000 and 8000 series planters only. Attaches directly on White planter scraper arms with adapter plate. Does NOT fit White 9000 series planters. Two-piece design; outside scraper. No modifications or holes to drill.
SEED DISK, ESET, CANOLA, .055"
Replacement 90-hole eSet seed disk for canola; 60,000 to 100,000 seeds per pound. Pro-Series requires purchase of speciality singulator (PPM720386), canola wiper kit (PPM720305) and deflector cover tube (PPM720281). Standard requires purchase of speciality singulator (PPM720386), canola wiper kit (PPM720295) and deflector cover tube (PPM720281).
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 31 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 32 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 6 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes compressor, air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 12 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 12 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 16 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 23 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 24 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 36 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 36 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 48 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 54 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 36 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 8 ROW, W/ COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Row cleaner mounting bracket sold separately.
STALK STOMPERS, G4, CAPELLO QUASAR, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Capello Quasar (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
8 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For all rows on a 8 row cornhead. For all rows on a 12 row cornhead except rows (1-2) and (11-12). To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 12R, W/ TOOLBAR, 12" SHOE
12 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 12R (folding head), W/ TOOLBAR, 12" SHOE
12 Row (folding head) - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 8R, W/ TOOLBAR, 12" SHOE
8 Row Kit (6 Outer Rows & 2 Inner Rows) - John Deere 40/90 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD C-SERIES, 12R (folding head), W/ TOOLBAR, 12" SHOE
12 Row (folding head) - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Lexion (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
Trail Jet Fertilizer Opener for a John Deere 1700 series with MaxEmerge 5 and ExactEmerge row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-SLICE INSERT, WHITE 6000, 8000
V-Slice Insert. Fits White 6000-8000 series. Does not fit White 9000 series.
BELT METER KIT, JD 1560 15' 10"
Belt Meter Kit. Fits John Deere drill model 1560 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 15' 10"
Belt Meter Kit. Fits John Deere drill model 1590 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 15' 10"
Belt Meter Kit. Fits John Deere drill model 750 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
KEETON, KINZE BRKT, DUAL TUBE TAIL
Keeton Seed Firmer, Dual Tube Liquid Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series. (Will not work with rotary disk scrapers). Compatible with WaveVision Seed Tube.
KNIFE ASSEMBLY & KNFHD, JD 230, 930, 11SPI
OEM 30-foot sectional knife assembly with fine tooth sections (11-SPI) and RSP052094 knifehead for John Deere 200 & 900 series headers with 3" cutting system. Hardware is included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 12.5', 7SPI
OEM 12.5-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 640FD, 740FD, DD, RH, 7SPI
OEM 20-foot RIGHT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 640FD, 740FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16 RID, 5/8"
MudSmith wheel with 3" x 16" reduced inner diameter (RID) tire with 5/8" bearing. Will fit Great Plains, John Deere, Kinze, Monosem and White planters with 5/8" bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
OEM SECTION, NH, 11SPI, BOX OF 25
Box of 25, New Holland section, 11 serrations per inch. Fits New Holland 1112, 1114, 1116 and 1118.
POLY KIT, SILVER, CIH 1020, 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 22', PRE-DRILLED, 3/8"
22 Ft. JD 200F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
SCH 17MM CENTER GUARD, (SHORT II)
SCH EasyCut II short 17mm 2-point center guard. The 17mm guards are gray in color, with a 7 stamped on the bottom.
SCH 17MM OPEN TOP GUARD, (LONG II)
SCH EasyCut II long 17mm 2-point open top guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM OPEN TOP GUARD, (STD II)
Fits SCH EasyCut systems installed on CaseIH, 820 & 1020. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH KNFHD, JD, MACDON, MO-CO (NEEDLE) RH
Fits SCH EasyCut system installed on John Deere 300, 890, 895, 1600 double drives, needle bearing style, RH. Will also work on MacDon 920, RH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SEED DEFLECTOR COVER TUBE, ESET
Seed deflector cover tube (blocker) for small seed crops.
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 31 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 31 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 32 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 32 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER, SINGLE VALVE, 6 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 6 row planter. Includes air lines, air cylinders and controller with 1 proportional valve and 1 directional valve which allows you to set the psi and then select up, down or float for your row cleaners. Compressor NOT included. Row cleaner mounting bracket sold separately,
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 12 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 16 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 16 row planter. Includes compressor, air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 23 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 23 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 24 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 36 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 24 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 48 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 48 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 54 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 54 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, ROW CLEANER/AIR BAG, DUAL VALVE, 8 ROW, W/O COMPRESSOR
Martin Smart Clean air control kit for 8 row planter. Includes air lines, air cylinders and controller with 2 proportional valves and 1 directional valve. Allows the operator to adjust row cleaners same as in a single valve system, plus be able to set the psi on a second circuit to control air bags. Compressor NOT included. Row cleaner mounting bracket sold separately.
STALK STOMPERS, G4, CAPELLO QUASAR, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Capello Quasar (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
8 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes. NOTE: These will ONLY work with 8 & 12 row cornheads. For all rows on a 8 row cornhead except 4 and 5. For all rows on a 12 row cornhead except rows (1-2) and (11-12).
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, DRAGO GT SERIES, 12R, W/O TOOLBAR, 12" SHOE
12 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 12R (folding head), W/O TOOLBAR, 12" SHOE
12 Row (folding head) - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 40/90, 8R, W/O TOOLBAR, 12" SHOE
8 Row Kit (6 Outer Rows & 2 Inner Rows) - John Deere 40/90 series (without toolbar), G4 with 12" shoes. G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 12R (folding head), W/O TOOLBAR, 12" SHOE
12 Row (folding head) - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD C-SERIES, 12R (folding head), W/O TOOLBAR, 12" SHOE
12 Row (folding head) - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
STALK STOMPERS, G4, LEXION, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Lexion (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
TRAIL-JET, JD 1700, ME5, EE, DUAL
Dual Trail Jet Fertilizer Opener for a John Deere 1700 series with MaxEmerge 5 and ExactEmerge row units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
V-Shot Insert. Fits White 6000 and 8000 series. Does NOT fit White 9000 series..
13" SPIKED CLOSING WHEEL KIT, WHITE 5100
13" spiked closing wheels for White 5100 with OEM press wheel assembly.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 12.5', 14SPI
OEM 12.5-foot LEFT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 640FD, 740FD, DD, LH, 14SPI
OEM 20-foot LEFT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 640FD, 740FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16 RID, ROLL PIN, CIH
MudSmith wheel with 4.5" x 16" reduced inner diameter (RID) tire with water pump style (roll pin) bearing for Case-IH. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
OEM SECTION, CIH, MACDON, NH, 7SPI, BOX OF 25
Box of 25, Case-IH, MacDon and New Holland section, 7 serrations per inch. Will fit Case-IH 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
POLY KIT, YELLOW, JD 200-900, PRE-DRILLED, 24' X 1/4"
24 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
SCH 17MM 2-PT GUARD, AGCO/MF 5300, 5400, (LONG II)
SCH EasyCut II long 17mm 2-point guard for AGCO 5300, 5400. These 17mm guards are black in color, with a 7 stamped on the bottom.
Fits SCH EasyCut system installed on John Deere crank arm style, rigid, bearing not included, Left Hand Knifehead. Knifehead hardware package, SCP083784, not included.
Specialty extractor for eSet.
12 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (toolbar mount) G4 with 12" shoes. NOTE: To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 12R (folding head), W/ TOOLBAR, 12" SHOE
12 Row (folding head) - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 18R, W/ TOOLBAR, 12" SHOE
18 Row - Geringhoff Horizon (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. NOTE: This kit accommodates 20" and 22" row spacing.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 18R, W/ TOOLBAR, 12" SHOE
18 Row - Geringhoff Northstar, Patriot & Rota Disc (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. NOTE: This kit accommodates 20" and 22" row spacing.
STALK STOMPERS, G4, JD 40/90, 12R, W/ TOOLBAR, 12" SHOE
12 Row Kit (10 Outer Rows & 2 Inner Rows) - John Deere 40/90 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 16R, W/ TOOLBAR, 12" SHOE
16 Row - John Deere 600/700 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 16R, W/ TOOLBAR, 12" SHOE
16 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
V-Shot Insert. Fits White 9000 series.
13" SPIKED CLOSING WHEEL KIT, WHITE 6100
13" spiked closing wheels for White 6100 with OEM press wheel assembly.
Bearing for SCP011121 Knifehead.
CLEAN SWEEP BRACKET, YETTER 2967-035, JD 7000, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-035 on John Deere 7000and 7100; White 6000 and 8000 series. NOTE: 1 required per row.
KEETON, KINZE BRKT, SHORT LP TAIL
Keeton Seed Firmer, Short Low Profile Tail. Mounts inside row unit between scrapers. Fits JD planter models 7000 & 7100 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series. (Will not work with rotary disk scrapers). Compatible with WaveVision Seed Tube.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 12.5', 14SPI
OEM 12.5-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 640FD, 740FD, DD, RH, 14SPI
OEM 20-foot RIGHT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 640FD, 740FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16 RID, 5/8", CIH
MudSmith wheel with 4.5" x 16" reduced inner diameter (RID) tire with 5/8" bearing for Case-IH. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions.
OEM SECTION, CIH, MACDON, NH, 14SPI, BOX OF 25
Box of 25, Case-IH, MacDon and New Holland section, 14 serrations per inch. Will fit Case-IH 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C
POLY KIT, SILVER, CIH 1020, 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 24', PRE-DRILLED, 3/8"
24 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
SCH 17MM CENTER GUARD, AGCO/MF 5300, 5400, (LONG II)
SCH EasyCut II long 17mm 2-point center guard for AGCO 5300, 5400. These 17mm guards are black in color, with a 7 stamped on the bottom.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, DRAGO GT SERIES, 12R (folding head), W/O TOOLBAR, 12" SHOE
12 Row (folding head) - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, GERINGHOFF HORIZON, 18R, W/O TOOLBAR, 12" SHOE
18 Row - Geringhoff Horizon (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. NOTE: This kit accommodates 20" and 22" row spacing.
STALK STOMPERS, G4, GERINGHOFF PATRIOT, NORTHSTAR, ROTA DISC, 18R, W/O TOOLBAR, 12" SHOE
18 Row - Geringhoff Northstar, Patriot & Rota Disc (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. NOTE: This kit accommodates 20" and 22" row spacing.
STALK STOMPERS, G4, JD 40/90, 12R, W/O TOOLBAR, 12" SHOE
12 Row Kit (10 Outer Rows & 2 Inner Rows) - John Deere 40/90 series (without toolbar), G4 with 12" shoes. G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD 600/700, 16R, W/O TOOLBAR, 12" SHOE
16 Row - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 16R, W/O TOOLBAR, 12" SHOE
16 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
V-Shot Insert. Fits the Kinze 4900 row units only.
BELT METER KIT, CIH 5400 15' 7.5"
Belt Meter Kit. Fits Case-IH drill model 5400 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1200 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1210 12' 7.5"
Belt Meter Kit. Fits Great Plains drill model 1210 12' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1510 15' 7.5"
Belt Meter Kit. Fits Great Plains drill model 1510 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
elt Meter Kit. Fits Great Plains drill model 2000 20' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2010 20' 7.5"
Belt Meter Kit. Fits Great Plains drill model 2010 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2400 24' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2410 24' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 3010 30' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD12 12' 7"
Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD15 15' 7.5"
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1560 15' 15"
Belt Meter Kit. Fits John Deere drill model 1560 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 15' 15"
Belt Meter Kit. Fits John Deere drill model 1590 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 455 25' 7.5"
Belt Meter Kit. Fits John Deere drill model 455 25' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 15' 15"
Belt Meter Kit. Fits John Deere drill model 750 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
CANOLA WIPER KIT, PRO-SERIES ESET
Canola wiper kit for Pro-Series eSet.
CLOSING WHEEL BRACKET, KINZE 93 & PRIOR, ROLL PIN
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits Kinze 1993 and before planters and accepts roll pin style closing wheels.
Keeton Seed Firmer, Standard Dry Tail. Seed Tube Mount. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series, (Will not fit EdgeVac planter). White planter models 5000, 6000, 8000 and 9000 series. Great Plains Yield-Pro planters. Monosem fits all planter models.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 15', 7SPI
OEM 15-foot LEFT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 645FD, 745FD, DD, LH, 7SPI
OEM 22.5-foot LEFT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 645FD, 745FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
LOCKEASE HITCH PIN, 3/4" X 4-1/2"
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16 RID, ROLL PIN, CIH
MudSmith wheel with 3" x 16" reduced inner diameter (RID) tire with water pump style (roll pin) bearing for Case-IH. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
POLY KIT, YELLOW, JD 200, 900, PRE-DRILLED, 25' X 1/4"
25 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
SCH 17MM OPEN TOP GUARD, AGCO/MF 5300, 5400, (LONG II)
SCH EasyCut II long 17mm 2-point open top guard for AGCO 5300, 5400. These 17mm guards are black in color, with a 7 stamped on the bottom.
SCH KNFHD, CIH, JD, MACDON 960, 963, MF, MO-CO, LH, 0 DEGREE
Fits SCH EasyCut system installed on Case-IH 6000, John Deere 2360, Massey Ferguson 885 and MacDon 910, 920, 942, 960, 973 and 7000. Bearings are not included. Knifehead hardware package, SCP083601, not included.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 18R, W/ TOOLBAR, 12" SHOE
18 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (toolbar mount) G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing.
STALK STOMPERS, G4, DRAGO GT SERIES, 16R, W/ TOOLBAR, 12" SHOE
16 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, DRAGO SERIES I, II, 18R, W/ TOOLBAR, 12" SHOE
18 Row - Drago Series I and II (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 600/700, 18R, W/ TOOLBAR, 12" SHOE
18 Row - John Deere 600/700 series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 16R (folding head), W/ TOOLBAR, 12" SHOE
16 Row (folding head) - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
BELT METER KIT, GP3PD15 15' 7.5" W/MARKERS
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 7.5" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
CANOLA WIPER KIT, STANDARD ESET
Canola wiper kit for standard eSet.
Keeton Seed Firmer, Standard Liquid Tail. Seed Tube Mount. Fits JD planter models 7000, 7100, 7200, 7300 & 1700 series. JD drill models 1530 & 1535. Kinze planter models 2000 & 3000 series, (Will not fit EdgeVac planter). White planter models 5000, 6000, 8000 and 9000 series. Great Plains Yield-Pro planters. Monosem fits all planter models.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 15', 7SPI
OEM 15-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 645FD, 745FD, DD, RH, 7SPI
OEM 22.5-foot RIGHT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 645FD, 745FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
MUDSMITH SPOKED GAUGE WHEEL, 3 X 16 RID, 5/8", CIH
MudSmith wheel with 3" x 16" reduced inner diameter (RID) tire with 5/8" bearing for Case-IH. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 3" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
POLY KIT, YELLOW, JD 200, 900, 25', PRE-DRILLED, 3/8"
25 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, PRE-DRILLED, 30' X 1/4"
30 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
STALK STOMPERS, G4, CIH 2600, 4200, 4400; NH 99C, 980, 18R, W/O TOOLBAR, 12" SHOE
18 Row - Case-IH 2600, 4200, 4400; New Holland 99C, 980 (without toolbar) G4 with 12" shoes.
STALK STOMPERS, G4, DRAGO GT SERIES, 16R, W/O TOOLBAR, 12" SHOE
16 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, DRAGO SERIES I, II, 18R, W/O TOOLBAR, 12" SHOE
18 Row - Drago Series I and II (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD 600/700, 18R, W/O TOOLBAR, 12" SHOE
18 Row - John Deere 600/700 series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere 606C, 608C, 612C, 616C, 618C, 706C, 708C, 712C, 716C and 718C.
STALK STOMPERS, G4, JD C-SERIES, 16R (folding head), W/O TOOLBAR, 12" SHOE
16 Row (folding head) - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
V-51 Opener. Fits White 5100 and 5700 series.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 15', 14SPI
OEM 15-foot LEFT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 645FD, 745FD, DD, LH, 14SPI
OEM 22.5-foot LEFT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 645FD, 745FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
STALK STOMPERS, G4, DRAGO GT SERIES, 18R, W/ TOOLBAR, 12" SHOE
18 Row - Drago GT Series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidwall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable.
STALK STOMPERS, G4, JD C-SERIES, 18R, W/ TOOLBAR, 12" SHOE
18 Row - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 15', 14SPI
OEM 15-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, JD 645FD, 745FD, DD, RH, 14SPI
OEM 22.5-foot RIGHT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 645FD, 745FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
MUDSMITH SPOKED GAUGE WHEEL, 2.5 X 16, SET SCREW
MudSmith wheel with 2.5" x 16" standard tire with set screw style bearing. Will fit John Deere and White planters with a set screw style bearing. . Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 2.5" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
STALK STOMPERS, G4, DRAGO GT SERIES, 18R, W/O TOOLBAR, 12" SHOE
18 Row - Drago GT Series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows.
STALK STOMPERS, G4, JD C-SERIES, 18R, W/O TOOLBAR, 12" SHOE
18 Row - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 17.5', 7SPI
OEM 17.5-foot LEFT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
MUDSMITH SPOKED GAUGE WHEEL, 2.5 X 16, 5/8"
MudSmith wheel with 2.5" x 16" standard tire with 5/8" bearing. Will fit Great Plains, John Deere, Kinze, Monosem and White with a 5/8" bearing. Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. 2.5" wide tires are designed for twin row seeders and no-till conditions so less residue is contacting the tire improving the seed depth consistency.
STALK STOMPERS, G4, JD C-SERIES, 18R (folding head), W/ TOOLBAR, 12" SHOE
18 Row (folding head) - John Deere C-series (toolbar mount), G4 with 12" shoes. To reduce cost, the 2x2 toolbar can be removed from the kit. This is standard 2x2 square, 3/16" sidewall tubing. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
13" SPIKED CLOSING WHEEL, JD 1560-1990, LH
Drill Spading Closing Wheel, Left hand, single spiked closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564L)
BELT METER KIT, CIH 5400 15' 8"
Belt Meter Kit. Fits Case-IH drill model 5400 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5500 30' 7.5"
Belt Meter Kit. Fits Case-IH drill model 5500 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1200 12' 7.5"
Belt Meter Kit. Fits Great Plains drill model 1200 12' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1210 12' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1500 15' 7.5"
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1510 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2000 20' 7.5"
Belt Meter Kit. Fits Great Plains drill model 2000 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2010 20' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2400 24' 7.5"
elt Meter Kit. Fits Great Plains drill model 2400 24' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2410 24' 10"
Belt Meter Kit. Fits Great Plains drill model 2410 24' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD12 12' 8"
Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD15 15' 8"
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD20 20' 8"
Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1520 20' 7.5"
Belt Meter Kit. Fits John Deere drill model 1520 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1560 20' 7.5"
Belt Meter Kit. Fits John Deere drill model 1560 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 455 25' 10"
Belt Meter Kit. Fits John Deere drill model 455 25' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 455 25' 15"
Belt Meter Kit. Fits John Deere drill model 455 25' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
CAM ADJUST, WA1360, KINZE W/NTC
Optional cam dial depth adjustment for WA1360 row cleaners. Adjust depth in 1/4" increments. For Kinze with OEM no-till coulters.
CAP, LONG, AD-IA, AD-IA/D, ST-IA, TM-IA
MagnoJet, Cap for MagnoJet Air Inducted Nozzles. Protection without restricting air flow. Fits MagnoJet nozzles starting with MNJ21XXXX, MNJ31XXXX,MNJ41XXXX & MNJ51XXXX. Rubber seal sold separately.
CLOSING WHEEL BRACKET, KINZE 94 & NEWER, BOLT-ON
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits Kinze planters 1994 and newer and accepts bolt on style closing wheels.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 17.5', 7SPI
OEM 17.5-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
ST 13501.5 GREEN, TURBO FLAT FAN
MagnoJet, ST 135 Degree 01.5 Green, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
STALK STOMPERS, G4, JD C-SERIES, 18R (folding head), W/O TOOLBAR, 12" SHOE
18 Row (folding head) - John Deere C-series (without toolbar), G4 with 12" shoes. NOTE: Toolbar configuration based on 30" rows; kit will accomodate narrower rows. Due to variation of implement configurations, row coverage under the feederhouse may not be applicable. Will fit John Deere C6R, C8F, C8R, C12F, C12R, C16F, C16R, C18F and C18R.
WA BRACKET, CIH 800-900 SERIES, 2" STEM
Case-IH 800, 900 series without heavy duty down pressure springs, accepts 2” stem wheel assemblies.For use on Case IH 800, 900, 950 series WITHOUT heavy duty down pressure springs. Additional mounting kit required for early 800 series planters.
BELT METER KIT, GP3PD15 15' 8" W/MARKERS
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 8" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD20 20' 8" W/MARKERS
Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 8" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 17.5', 14SPI
OEM 17.5-foot LEFT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
BELT METER KIT, GP3PD12 12' 7.5"
Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1560 20' 10"
Belt Meter Kit. Fits John Deere drill model 1560 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 17.5', 14SPI
OEM 17.5-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 20', 7SPI
OEM 20-foot LEFT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 20', 7SPI
OEM 20-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
BELT METER KIT, CIH 5400 15' 10"
Belt Meter Kit. Fits Case-IH drill model 5400 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1200 12' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1210 12' 10"
Belt Meter Kit. Fits Great Plains drill model 1210 12' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1510 15' 10"
Belt Meter Kit. Fits Great Plains drill model 1510 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2000 20' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2010 20' 10"
Belt Meter Kit. Fits Great Plains drill model 2010 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2410 24' 15"
Belt Meter Kit. Fits Great Plains drill model 2410 24' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1560 20' 15"
Belt Meter Kit. Fits John Deere drill model 1560 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
Belt Meter Kit. Fits John Deere drill model 455 30' with 6" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
CLOSING WHEEL BRACKET, JD 7000, 7100, BOLT-ON
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts bolt on style closing wheels.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 20', 14SPI
OEM 20-foot LEFT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
LOCKEASE HITCH PIN, 7/8" X 4-1/2"
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
MOUNT, WA1345, WA1360, JD 7000, KINZE, WHITE, W/DUAL UMO
Will fit John Deere 7000, 7100; Kinze 2000, 3000, 4900 series; White 6000, 8000 series; without a no-till coulter to mount the WA1345 or WA1360 floating row cleaner assembly and dual UMO-150 fertilizer opener. Requires 30" of clearance from the face plate of the planter row unit forward.
UNIT SET BACK BRACKET, JD 7000, KINZE
Moves planter unit back 6". Includes bolts for attaching and 12" of #41 roller chain plus connector. The bracket mounts between the parallel linkage and the face plate of the planter with the cross bar to the top. Re-use 4 original bolts and 4 new bolts to complete installation. Note: Will fit older Kinze units if the down pressure springs have a threaded plug on the ends that a bolt goes through. Will NOT fit older Kinze units if down pressure springs have a hook on them.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 20', 14SPI
OEM 20-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 22.5', 7SPI
OEM 22.5-foot LEFT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 22.5', 7SPI
OEM 22.5-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, LH, 22.5', 14SPI
OEM 22.5-foot LEFT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
MagnoJet, 50 Mesh nozzle body Filter. Preferably sold in package quantity of 10.
BELT METER KIT, GP1200 12' 10"
Belt Meter Kit. Fits Great Plains drill model 1200 12' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP1500 15' 10"
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2000 20' 10"
Belt Meter Kit. Fits Great Plains drill model 2000 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 2400 24' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD12 12' 10"
Belt Meter Kit. Fits Great Plains drill model 3PD12 12' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD15 15' 10"
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD20 20' 10" W/MARKERS
Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 10" spacing and Markers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1520 20' 10"
Belt Meter Kit. Fits John Deere drill model 1520 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1560 30' 7.5"
Belt Meter Kit. Fits John Deere drill model 1560 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 20' 7.5"
Belt Meter Kit. Fits John Deere drill model 1590 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 455 30' 7.5"
Belt Meter Kit. Fits John Deere drill model 455 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 20' 7.5"
Belt Meter Kit. Fits John Deere drill model 750 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
C125 BRACKET, WHITE 8000, 24-3/4"
Will fit White 8000 series planters without a no-till coulter to mount the C125 floating row cleaner assembly. Requires 24-3/4" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MagnoJet, Cap for MagnoJet Air Inducted Nozzles. Fits MagnoJet nozzles starting with MNJ21XXXX, MNJ31XXXX,MNJ41XXXX & MNJ51XXXX. Rubber seal sold separately.
KNIFE ASSEMBLY, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, DD, RH, 22.5', 14SPI
OEM 22.5-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
POP MAX PLATE, WITH "A" INSERT, CORN
The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeble inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush.
ST 13502 YELLOW, TURBO FLAT FAN
MagnoJet, ST 135 Degree 02 Yellow, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
UNIT SET BACK BRACKET, JD 7200-1700
Moves planter unit back 6" and creates new location for down pressure mechanism. Includes bolts for attaching and 12" of #41 roller chain plus connector. Will not work on XP Pro-Series units because the Pro-Shaft drive is used instead of chains to drive the seed meter. Will work with John Deere heavy duty down pressure springs.
WA BRACKET, CIH 1200, 1300 SERIES, 2" STEM
Case-IH 1200, 1300 series, accepts 2” stem wheel assemblies.Accepts 2" stem MRT001334 wheel assemblies. For use on Case IH 1200, 1250 and 1300 series planters.
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, 15', 7SPI
OEM 15-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
BELT METER KIT, JD 1560 30' 10"
Belt Meter Kit. Fits John Deere drill model 1560 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 20' 10"
Belt Meter Kit. Fits John Deere drill model 1590 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 20' 10"
Belt Meter Kit. Fits John Deere drill model 750 20' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, 15', 14SPI
OEM 15-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, 20', 7SPI
OEM 20-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, 20', 14SPI
OEM 20-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 with 3" cutting system. Knifehead NOT included. Hardware and knife connector kits are included.
BELT METER KIT, GP1500 15' 15"
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2000 20' 14"
Belt Meter Kit. Fits Great Plains drill model 2000 20' with 14" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2400 24' 10"
Belt Meter Kit. Fits Great Plains drill model 2400 24' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD15 15' 15"
Belt Meter Kit. Fits Great Plains drill model 3PD15 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1560 30' 15"
Belt Meter Kit. Fits John Deere drill model 1560 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 20' 15"
Belt Meter Kit. Fits John Deere drill model 1590 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 455 30' 10"
Belt Meter Kit. Fits John Deere drill model 455 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 20' 15"
Belt Meter Kit. Fits John Deere drill model 750 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, DD, LH, 10', 7SPI
OEM 10-foot LEFT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
MOUNT, WA1360, KINZE 2000, 3000, W/NTC
Will fit Kinze 2000, 3000 series with OEM double arm no-till coulters to mount the WA1360 floating row cleaner assembly. (Will NOT fit Kinze Twin Line single arm no-till coulter.) Requires 22" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row. Will NOT work with the WA1345 row cleaner.
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, DD, RH, 10', 7SPI
OEM 10-foot RIGHT HAND sectional knife assembly with coarse tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, DD, LH, 10', 14SPI
OEM 10-foot LEFT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
KNIFE ASSEMBLY, CIH 2142, 2152; MACDON D50, D60, D65, DD, RH, 10', 14SPI
OEM 10-foot RIGHT HAND sectional knife assembly with fine tooth sections for Case-IH 2142, 2152 and MacDon D50, D60, D65 double drive platform with 3" cutting system. Knifeheads NOT included. Hardware and knife connector kits are included.
ADJUSTABLE BRUSH, PRECISION METER
For the first time, with just a set screw, you can change the aggressiveness of the Precision meter. Set the brush toward the outside of the finger for large seeds so they don't dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles.
BELT METER KIT, GP1500 15' 16"
Belt Meter Kit. Fits Great Plains drill model 1500 15' with 16" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2000 20' 15"
Belt Meter Kit. Fits Great Plains drill model 2000 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2400 24' 15"
Belt Meter Kit. Fits Great Plains drill model 2400 24' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1590 30' 7.5"
Belt Meter Kit. Fits John Deere drill model 1590 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 455 30' 15"
Belt Meter Kit. Fits John Deere drill model 455 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
C125 BRACKET, JD 7200-1700, WHITE 9000, 24-3/4"
Will fit John Deere 7200, 7300, 1700 series and White 9000 series planters with no-till coulter to mount the C125 floating row cleaner assembly. Requires 24-3/4" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
LOCKEASE HITCH PIN, 1-1/8" X 7"
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
MOUNT, WA1345, WA1360, CIH 800-2000
Will fit Case-IH planters 800-1300 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly. Requires 22" of clearance from the face plate of the planter row unit forward. (Will NOT fit on Case-IH planters with mechanical drive that has a hexagonal drive shaft under the parallel arms.) NOTE: One bracket per row.
ST 13502.5 LILAC, TURBO FLAT FAN
MagnoJet, ST 135 Degree 02.5 Lilac, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
WA BRACKET, WHITE 5000 SERIES, 1-1/2" STEM
White 5100 series, accepts 1-½” stem wheel assemblies.Accpets 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For White 5100 series.
WA1320 PIN ADJUST 13" SPIKED ROW CLEANER
Pin-adjust row cleaner, narrow row, 1-½” stem, 13” wheels. Should only be used in minimum residue conditions to move clods. Not recommended in no-till. Gauge wheel arm equalizers (Depth-A-Matics) are recommended to reduce row unit bounce caused by gauge wheels encountering varying amounts of residue. Mounting Bracket sold separately.
BELT METER KIT, JD 1590 30' 10"
Belt Meter Kit. Fits John Deere drill model 1590 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
LOCKEASE HITCH PIN, 1-1/4" X 7"
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
BELT METER KIT, JD 1590 30' 15"
Belt Meter Kit. Fits John Deere drill model 1590 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
LOCKEASE HITCH PIN, 1-1/2" X 8"
Lockease Hitch Pins have a revolutionary large Heavy Duty handle which locks in place and eliminating the need for a small hair pin at the bottom. The large handle provides for more leverage for easier removal. These hitch pins are made of 1045 cold drawn steel and heat treated to provide greater strength and wear characteristics.
MOUNT, WA1345, WA1360, CIH 1200-2000, W/SINGLE UMO
Will fit Case-IH 1200 and 1300 series planters without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly and UMO-100 fertilizer opener. Requires heavy duty lower parallel arms (MRT007106). (Will NOT fit on Case-IH planters with mechanical drive that has a hexagonal drive shaft under the parallel arms.) NOTE: One bracket per row.
BELT METER KIT, CIH 5400 20' 7"
Belt Meter Kit. Fits Case-IH drill model 5400 20' with 7" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD20 20' 15"
Belt Meter Kit. Fits Great Plains drill model 3PD20 20' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 455 35' 7.5"
Belt Meter Kit. Fits John Deere drill model 455 35' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
C125 BRACKET, GREAT PLAINS PLANTER
Bracket for Great Plains Yield-Pro Planter, YP-1225 and YP-1625 with 30" single row spacing. Bracket is used for standard C125 row cleaners. There is enough room to install a UMO-100 if desired. Use UMO-MTG bracket.
CLOSING WHEEL BRACKET, JD 7200, 7300, 1700, BOLT-ON
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7200, 7300 & 1700 and accepts bolt on style closing wheels.
With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion.
MagnoJet, ST 135 Degree 03 Blue, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
WA BRACKET, WHITE 6000 SERIES, 1-1/2" STEM
White EARLY 6000 series with HEAVY duty down pressure springs, accepts 1-½” stem wheel assemblies. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For use on White early 6000 series with HEAVY duty down pressure springs.Top holes on early 6000 series must be 9-1/2" center to center. White early 6000 series with REGULAR duty down pressure springs require MRT002000 mounts.
BELT METER KIT, CIH 5400 20' 7.5"
Belt Meter Kit. Fits Case-IH drill model 5400 20' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 455 35' 10"
Belt Meter Kit. Fits John Deere drill model 455 35' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, CIH 5400 20' 8"
Belt Meter Kit. Fits Case-IH drill model 5400 20' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
MagnoJet, ST 135 Degree 04 Red, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
WA BRACKET, WHITE 6000, 8000 SERIES, 1-1/2" STEM
White LATE 6000 series and all 8000 series, accepts 1-½” stem wheel assemblies. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For use on late White 6000 series and all White 8000 series. Top holes on late 6000 series must be 9" center to center.
BELT METER KIT, CIH 5400 20' 10"
Belt Meter Kit. Fits Case-IH drill model 5400 20' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
ST 13505 BROWN, TURBO FLAT FAN
MagnoJet, ST 135 Degree 05 Brown, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
WA BRACKET, DEUTZ-ALLIS, 1-1/2" STEM
Deutz-Allis Quadra Disk, Landoll, accepts 1-½” stem wheel assemblies.Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For Deutz AC Quadra Disk and Landoll.
BELT METER KIT, CIH 5500 30' 10"
Belt Meter Kit. Fits Case-IH drill model 5500 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1560 10' 7.5"
Belt Meter Kit. Fits John Deere drill model 1560 10' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 10' 7.5"
Belt Meter Kit. Fits John Deere drill model 1590 10' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 30' 7.5"
Belt Meter Kit. Fits John Deere drill model 750 30' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
DIMPLE CLOSING WHEEL, 20-PT, JD 750, 1850, RH
Drill Dimple Closing Wheel, Right hand, single 20 point dimple closing wheel. Fits John Deere drill models 750 & 1850. (SCW75B4D-20R) Less aggressive than spiked wheels.
MagnoJet, ST 135 Degree 06 Gray, Ceramic Spray Nozzle, Turbo Flat Fan. Preferably sold in package quantity of 12.
Optional wheel weight. Two required per row. Adds weight to floating row cleaners. For use when planting in extremely hard soil conditions. Weight 4 lbs. each. Fit 4-bolt hubs.
BELT METER KIT, JD 750 30' 10"
Belt Meter Kit. Fits John Deere drill model 750 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1560 10' 15"
Belt Meter Kit. Fits John Deere drill model 1560 10' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1590 10' 15"
Belt Meter Kit. Fits John Deere drill model 1590 10' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 30' 15"
Belt Meter Kit. Fits John Deere drill model 750 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 10' 7.5"
Belt Meter Kit. Fits John Deere drill model 750 10' with 7.5" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 10' 10"
Belt Meter Kit. Fits John Deere drill model 750 10' with 10" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 750 10' 15"
Belt Meter Kit. Fits John Deere drill model 750 10' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (On early model 750 drills, before Serial number 10550, the seed tubes will not fit onto the Belt Meter without modification.) (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
HARDWARE KIT, HHCS, 5/8-11 X 1-3/4 GR5-PLTD
Includes left hand and right hand 5/8-11 X 1-3/4 bolt.
10" high definition wired camera system. Includes one high definition camera and one 30' cable. The monitor has eight camera inputs with the ability to toggle between camera views or view all eight at the same time. Additional camera and cable packages sold separately.
10" standard wired camera system. Includes two standard 700 TVL cameras and two 30' cables. The monitor has four camera inputs with the ability to toggle between four camera views. Additional camera and cable packages sold separately.
12" EXTENDED SHAFT, AIR FILTER BLASTER
12" extended shaft (includes o-ring) for filters with depths above 26".
13" CUPPED DIMPLE CLOSING WHEELS, 20-PT, BOLT-ON, 5/8", M16
13", 20 point cupped dimple closing wheels for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
13" CUPPED DIMPLE CLOSING WHEELS, 20-PT, BOLT-ON, M17
13", 20 point cupped dimple closing wheels for John Deere planters with a 16.95 threaded spindle on closing wheel frame.
13" CUPPED DIMPLE CLOSING WHEELS, 20-PT, ROLL PIN
13", 20 point cupped dimple closing wheels for John Deere, Kinze and White planters where closing wheels are attached with roll pin.
13" CUPPED DIMPLE WHEEL ONLY, 4-BOLT
13", 20 point cupped dimple wheel with 4 bolt hole pattern.
13" SPIKED WHEEL ONLY, 3 & 4-BOLT, LH
Steel Wheel, 13" diameter with diamond shaped points, 3-Bolt and 4-Bolt pattern. Left Hand on row cleaner & Right Hand on closing wheels. Note: 13" wheels should be replaced when 12" or less.
13" SPIKED WHEEL ONLY, 3 & 4-BOLT, RH
Steel Wheel, 13" diameter with diamond shaped points, 3-Bolt and 4-Bolt pattern. Right Hand on row cleaner & Left Hand on closing wheels. Note: 13" wheels should be replaced when 12" or less.
14" 14 TOOTH CUPPED CLOSING WHEELS, BOLT-ON, 5/8", M16
14", 14 tooth cupped razor closing wheels for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
14" 14 TOOTH CUPPED CLOSING WHEELS, BOLT-ON, M17
14", 14 tooth cupped razor closing wheels for John Deere planters with a 16.95 threaded spindle on closing wheel frame.
14" 14 TOOTH CUPPED CLOSING WHEELS, ROLL PIN
14", 14 tooth cupped razor closing wheels for John Deere, Kinze and White planters where closing wheels are attached with roll pin.
15" SPIKED WHEEL ONLY, 3 & 4-BOLT, LH
Steel Wheel, 15" diameter with diamond shaped points, 3-Bolt and 4-Bolt pattern. Left Hand on row cleaner & Right Hand on closing wheels. Note: 15" wheels should be replaced when 13-3/4" or less.
15" SPIKED WHEEL ONLY, 3 & 4-BOLT, RH
Steel Wheel, 15" diameter with diamond shaped points, 3-Bolt and 4-Bolt pattern. Left Hand on row cleaner & Right Hand on closing wheels. Note: 15" wheels should be replaced when 13-3/4" or less.
18" EXTENSION, PRO CHUTE I, YELLOW
Extends the reach of your ProChute I (yellow). All metal construction. Easily hangs on slide gate for extra length.
18" EXTENSION, PRO CHUTE II, BLUE
Extends the reach of your ProChute II (blue). All metal construction. Easily hangs on slide gate for extra length.
2ND STAGE CLOSER, JD XP, ME5; HARVEST INTERNATIONAL
2nd Stage Closer seals and levels air pockets left in seed trench to ensure ideal seed to soil contact. Will fit John Deere planters with cast closing wheel bracket. 6 x 12, 4 x 12 or fCrumbler press wheel assembly and closing wheels sold separately. Compatible with any closing wheels.
2nd Stage Closer seals and levels air pockets left in seed trench to ensure ideal seed to soil contact. Will fit Kinze 3000 series planters. 6 x 12, 4 x 12 or fCrumbler press wheel assembly and closing wheels sold separately. Compatible with any closing wheels.
2nd Stage Closer seals and levels air pockets left in seed trench to ensure ideal seed to soil contact. Will fit White 9000 series planters. 6 x 12, 4 x 12 or fCrumbler press wheel assembly and closing wheels sold separately. Compatible with any closing wheels.
30" VACUUM GAUGE W/FILTER, ESET
Replacement 30" Vacuum Gauge with Filter.
36" EXTENSION, PRO CHUTE I, YELLOW
Extends the reach of your ProChute I (yellow). All metal construction. Easily hangs on slide gate for extra length and safety.
36" EXTENSION, PRO CHUTE II, BLUE
Extends the reach of your ProChute II (blue). All metal construction. Easily hangs on slide gate for extra length and safety.
5 FINGER QUICK TINE, ML, LEVEL II, SINGLE
5 finger quick tine for AGCO, Case-IH, Gleaner, John Deere, Massey Ferguson and New Holland. Will only fit with ML reel wtih 4.5" spacing and Level II reel with 6" spacing.
5" high definition digital wirelss camera kit with a built-in DVR and HD camera resolution. Includes one standard 90 degree wireless camera and quad processor that has the ability to toggle between camera views or view up to four cameras at the same time. Wide view, 140 degree, camera also available.
This is our standard 5" camera kit, which is a portable kit that is great for blind spots on your equipment in various industry applications. It's equipped with our standard 700 TVL camera and a 30 ft. cable. You can power your monitor with our cigarette lighter adapter or choose to hard-wire into your system.
This is our new heavy duty 5" camera kit, which is a portable kit that is perfect for your tough industry applications. There are three camera inputs on this system and the kit comes with a heavy duty U-bracket on the monitor to provider more protection. Like the standard 5" kit, it's equipped with our standard 700 TVL camera, but it comes with a 15 ft. cable.
This is our wireless 5" camera kit. This system combines our standard 5" monitor with our digital wireless camera system. Our digital wireless cameras can be adapted to any existing Vision Works Monitor. Our digital wireless cameras have 700 TVL resolution and have an IP68 durability rating. The monitor can be powered with our cigarette lighter adapter and the camera will need access to a power source to be hardwired, and this system can have only one camera input.
This camera system is designed help you eliminate those blind spots and stay safe at a very affordable price! The kit comes with a 5" LCD monitor with a suction cup mount. Our license plate model is durable and comes with a 30 ft. cable. This back up camera has 420 TVL resolution with color night vision. You can power your monitor with our cigarette lighter adapter, or choose to hard-wire into your system.
5-FINGER QUICK TINE, CIH, MACDON, NH, SINGLE
5 finger quick tine for Case-IH 2142, 2152, 2162; MacDon FD70, FD75, FD130, FD135, FD140, FD145; New Holland 82C, 83C, 86C.
5-FINGER QUICK TINE, JD 600FD, 700FD, SINGLE
5 finger quick tine for John Deere 630FD, 635FD, 640FD, 645FD, 730FD, 735FD, 740FD, 745FD and serial number 785000 & above. Designed to go over John Deere #HXE96538.
7" high definition wired camera system. Includes one high definition camera and one 30' cable. The monitor has four camera inputs with the ability to toggle between camera views or view all four at the same time. Additional camera and cable packages sold separately.
7" high definition digital wirelss camera kit with a built-in DVR and HD camera resolution. Includes one standard 90 degree wireless camera and quad processor that has the ability to toggle between camera views or view up to four cameras at the same time. Wide view, 140 degree, camera also available.
7" standard wired camera system. Includes one standard 700 TVL camera and one 30' cable. The monitor has two camera inputs with the ability to toggle between two camera views. Additional camera and cable packages sold separately.
9" CUPPED RAZOR CLOSING WHEEL KIT, 2000 SERIES
Planter Closing Wheels, includes a set of two 9" cupped razor closing wheels for Case-IH 2000 Series Early Riser row units with offset closing wheel arm. Replaces the smooth inverted closing disks. In wet conditions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they rotate up and out of the soil.
9" CUPPED RAZOR CLOSING WHEEL KIT, CIH 800, 900, 1200 SERIES
Planter Closing Wheels, includes a set of two 9" cupped razor closing wheels for Case-IH 800, 900, 1200, and 1300 Series Early Riser row units and Soybean Special grain drills with offset closing wheel arm. Replaces the smooth inverted closing disks. In wet conditions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they rotate up and out of the soil.
9" high definition digital wirelss camera kit with a built-in DVR and HD camera resolution. Includes one standard 90 degree wireless camera and quad processor that has the ability to toggle between camera views or view up to four cameras at the same time. Wide view, 140 degree, camera also available.
A-1 Mini Weeder with 10" Heads. Weed control the new and improved way. Designed by farmers. Faster weed control. Saves money. No more chopping weeds manually. No more expensive labor, and no more plastic! Ideal for crops such as vegetables, watermelon, pumpkin, squash, tobacco, and more! Single row model. Category 1&2 three-point mount with 3x3 toolbar. Two hydraulic driven heads. Two 10" heads with 3 tines each. Heads run 100-250 RPM. For 30" minimum row spacing. Optional sweep assembly available.
A-1 Mini Weeder with 6" Heads. Weed control the new and improved way. Designed by farmers. Faster weed control. Saves money. No more chopping weeds manually. No more expensive labor, and no more plastic! Ideal for crops such as vegetables, watermelon, pumpkin, squash, tobacco, and more! Single row model. Category 1&2 three-point mount with 3x3 toolbar. Two hydraulic driven heads. Two 6" heads with 3 tines each. Heads run 100-250 RPM. For 30" minimum row spacing. Optional sweep assembly available.
ACRE PLUS, JOHN DEERE 7200-1700
Acre Plus - Seed Box Extentions fits John Deere 7200, 7300 (1995 & newer) & 1700 series poly seed boxes. Yellow in color.
ACRE PLUS, KINZE 3000, 2001 & NEWER
Acre Plus - Seed Box Extensions for Kinze 3000 series poly seed boxes (Model year 2001and newer).
AD 11001 ORANGE, ANTI DRIFT FLAT FAN
MagnoJet, AD 110 Degree 01 Orange, Ceramic Spray Nozzle, Anti Drift Flat Fan. Preferably sold in package quantity of 24.
AD 11001.5 GREEN, ANTI DRIFT FLAT FAN
MagnoJet, AD 110 Degree 01.5 Green, Ceramic Spray Nozzle, Anti Drift Flat Fan. Preferably sold in package quantity of 24.
AD 11002 YELLOW, ANTI DRIFT FLAT FAN
MagnoJet, AD 110 Degree 02 Yellow, Ceramic Spray Nozzle, Anti Drift Flat Fan. Preferably sold in package quantity of 24.
AD 11003 BLUE, ANTI DRIFT FLAT FAN
MagnoJet, AD 110 Degree 03 Blue, Ceramic Spray Nozzle, Anti Drift Flat Fan. Preferably sold in package quantity of 24.
AD 11004 RED, ANTI DRIFT FLAT FAN
MagnoJet, AD 110 Degree 04 Red Ceramic Spray Nozzle, Anti Drift Flat Fan. Preferably sold in package quantity of 24.
AD 11005 BROWN, ANTI DRIFT FLAT FAN
MagnoJet, AD 110 Degree 05 Brown Ceramic Spray Nozzle, Anti Drift Flat Fan. Preferably sold in package quantity of 24.
AD-IA 11001.5 GREEN, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 110 Degree 01.5 Green, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 11002 YELLOW, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 110 Degree 02 Yellow, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 11002.5 LILAC, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 110 Degree 02.5 Lilac, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 11004 RED, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 110 Degree 04 Red, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 11005 BROWN, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 110 Degree 05 Brown, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 11006 GRAY, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 110 Degree 06 Gray, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 8001 ORANGE, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 80 Degree 01 Orange, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 8002 YELLOW, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 80 Degree 02 Yellow, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 8002.5 LILAC, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 80 Degree 02.5 Lilac, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 8003 BLUE, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 80 Degree 03 Blue, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 8004 RED, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 80 Degree 04 Red, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA 8005 BROWN, IA, ANTI DRIFT FLAT FAN
MagnoJet, ADIA 80 Degree 05 Brown, Ceramic Spray Nozzle, Air Inducted, Anti Drift Flat Fan. Preferably sold in package quantity of 6.
AD-IA/D 11001 ORANGE, IA, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 01 Orange, Ceramic Spray Nozzle, Air Inducted, Twin Flat Fan. Preferably sold in package quantity of 6.
AD-IA/D 11001.5 GREEN, IA, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 01.5 Green, Ceramic Spray Nozzle, Air Inducted, Twin Flat Fan. Preferably sold in package quantity of 6.
AD-IA/D 11002 YELLOW, IA, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 02 Yellow, Ceramic Spray Nozzle, Air Inducted, Twin Flat Fan. Preferably sold in package quantity of 6.
AD-IA/D 11003 BLUE, IA, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 03 Blue, Ceramic Spray Nozzle, Air Inducted, Twin Flat Fan. Preferably sold in package quantity of 6.
AD-IA/D 11004 RED, IA, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 04 Red, Ceramic Spray Nozzle, Air Inducted, Twin Flat Fan. Preferably sold in package quantity of 6.
AD-IA/D 11005 BROWN, IA, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 05 Brown, Ceramic Spray Nozzle, Air Inducted, Twin Flat Fan. Preferably sold in package quantity of 6.
AD/D 11001 ORANGE, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 01 Orange, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
AD/D 11001.5 GREEN, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 01.5 Green, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
AD/D 11002.5 LILAC, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 02.5 Lilac, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
AD/D 11003 BLUE, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 03 Blue, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
AD/D 11005 BROWN, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 05 Brown, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
AD/D 11006 GRAY, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 06 Gray, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
AD/D 11008 WHITE, TWIN FLAT FAN
MagnoJet, AD/D 110 Degree 08 White, Ceramic Spray Nozzle, Twin Flat Fan. Preferably sold in package quantity of 12.
ADAPTER, HD, WA1345, WA1360, ACCR1345, ACCR1360, CIH 1200, 2000
Mounting bracket kit for ACCR1345 and ACCR1360 on Case-IH 2000 series.
ADDITIONAL SENSOR, BIN MONITOR
Additional temperature sensor can be added to the cable when ordering a Bin Monitor. This allows you to know the grain temperature at different levels in the bin.
AGRO ECO POWER PERFORMANCE TUNE
Performance Enhancing Equipment Tune available for tractors, combines, self-propelled sprayers, forage harvesters, skid loaders, semi-trucks and construction equipment.
AHD 120 DEGREE CAMERA & 15' CABLE
High definition 120 degree (side view) camera and 15 foot cable bundle.
AHD 120 DEGREE CAMERA & 30' CABLE
High definition 120 degree (side view) camera and 30 foot cable bundle.
AHD 120 DEGREE CAMERA & 65' CABLE
High definition 120 degree (side view) camera and 65 foot cable bundle.
AHD 170 DEGREE CAMERA & 15' CABLE
High definition 170 degree (wide view) camera and 15 foot cable bundle.
AHD 170 DEGREE CAMERA & 30' CABLE
High definition 170 degree (wide view) camera and 30 foot cable bundle.
AHD 170 DEGREE CAMERA & 65' CABLE
High definition 170 degree (wide view) camera and 15 foot cable bundle.
AHD 90 DEGREE CAMERA & 15' CABLE
High definition 90 degree camera and 15 foot cable bundle.
AHD 90 DEGREE CAMERA & 30' CABLE
High definition 90 degree camera and 30 foot cable bundle.
AHD 90 DEGREE CAMERA & 65' CABLE
High definition 90 degree camera and 65 foot cable bundle.
15' Cord with 4-pin DICKEY-john AMP Connector.
ATTACHING PKG, ORBIT II, AGCO/MF 8200, 25' & 30'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. Includes mounting brackets, drive shafts, end shields, reel arms for mounting bat tubes to the center tube, reel arm bearings and all hardware for assembly. Will fit AGCO 8200, 25' and 30'.
ATTACHING PKG, ORBIT II, AGCO/MF 8200, 35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. Includes mounting brackets, drive shafts, end shields, reel arms for mounting bat tubes to the center tube, reel arm bearings and all hardware for assembly. Will fit AGCO 8200, 35'.
ATTACHING PKG, ORBIT II, CIH 2020, 25 & 30'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. Includes mounting brackets, drive shafts, end shields, reel arms for mounting bat tubes to the center tube, reel arm bearings and all hardware for assembly. Will fit Case-IH 2020, 25' and 30'.
ATTACHING PKG, ORBIT II, CIH 2020, 35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. Includes mounting brackets, drive shafts, end shields, reel arms for mounting bat tubes to the center tube, reel arm bearings and all hardware for assembly. Will fit Case-IH 2020, 35'.
ATTACHING PKG, ORBIT II, CIH 3020, NH 740CF, 25' & 30'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. Includes mounting brackets, drive shafts, end shields, reel arms for mounting bat tubes to the center tube, reel arm bearings and all hardware for assembly. Will fit Case-IH 3020 and New Holland 740CF, 25' and 30'.
ATTACHING PKG, ORBIT II, CIH 3020, NH 740CF, 35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. Includes mounting brackets, drive shafts, end shields, reel arms for mounting bat tubes to the center tube, reel arm bearings and all hardware for assembly. Will fit Case-IH 3020 and New Holland 740CF, 35'.
AUGER EXTENSION, CIH 1440, 1460, 1480, 1482, 1640, 1644, 1660, 1666, 1680, 1688, 36", ROUND DRIVE
36" Unloading Auger Extension for Case-IH 1440, 1460, 1480, 1482, 1640, 1644, 1660, 1666, 1680 and 1688. (Round Drive)
AUGER EXTENSION, CIH 1640, 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188, 2388, 36", SPLINE DRIVE
36" Unloading Auger Extension for Case-IH 1640, 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188 and 2388. (Spline Drive)
AUGER EXTENSION, GLEANER L, M, N, EARLY R SERIES, 30"
30" Unloading Auger Extension with 12" diameter for Gleaner L, M, N and Early R series.
AUGER EXTENSION, GLEANER LATE R SERIES, 30"
30" Unloading Auger Extension with 12" diameter for Gleaner late R series.
AUGER EXTENSION, GLEANER LATE R, S SERIES, 36"
36" Unloading Auger Extension with 14" diameter for Gleaner for late R and S Series.
24"-30" Unloading Auger Extension for John Deere 6620, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, 9650CTS, 9650STS and 9750STS. Will fit 3-1/2" O.D. inner auger tube. Converts to new style spout.
36" Unloading Auger Extension for John Deere 6620, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, 9650CTS, 9650ST and 9750STS. Will fit 2-7/8" O.D. inner auger tube.
36" Unloading Auger Extension for John Deere 6620, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, 9650CTS, 9650ST and 9750STS. Will fit 3-1/2" O.D. inner auger tube.
AUGER EXTENSION, JD 9560, 9660, 9750, 9760, 36", STANDARD RATE
Unloading Auger Extension for John Deere 9560, 9660, 9750 and 9760. Standard rate 36" extension.
Unloading Auger Extension for John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860ST and 9870STS. High rate 36" extension.
AUGER EXTENSION, JD 9660STS, 9760STS, 9860STS, S660, S670, S680, S690, 36", HIGH RATE
Unloading Auger Extension for John Deere 9660STS, 9760STS, 9860STS, S660, S670, S680 and S690. High rate 36" extension for folding system. Replaces complete outer tuber and auger. Also replaces inner tube with heavier new tube. Original tube is 66" long and is replaced by 102" long tube.
AUGER TROUGH LINER, CIH 1020, 15'
Case-IH 1020, 15' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 1020, 17.5'-20'
Case-IH 1020, 17.5'-20' Auger Trough Liner. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 1020, 22.5'
Case-IH 1020, 22.5' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 1020, 25'
Case-IH 1020, 25' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 1020, 30'
Case-IH 1020, 30' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 2020, NH 74C, 20'
Case-IH 2020 and New Holland 74C, 20' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 2020, NH 74C, 25'
Case-IH 2020 and New Holland 74C, 25' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 2020, NH 74C, 30'
Case-IH 2020 and New Holland 74C, 30' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, CIH 2020, NH 74C, 35'
Case-IH 2020 and New Holland 74C, 35' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, JD 50 SERIES, 6R-30"
6 Row Auger Trough Liner for John Deere 50 series cornhead with 30" rows.
AUGER TROUGH LINER, JD 50 SERIES, 8R-30"
8 Row Auger Trough Liner for John Deere 50 series cornhead with 30" rows.
AUGER TROUGH LINER, JD 90/40, 12R-30"
12 Row Auger Trough Liner for John Deere 90/40 series cornhead with 30" rows. Green in color. Also available in white.
AUGER TROUGH LINER, NH 972, 973, 13'-16'
New Holland 972, 973, 13'-16' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, NH 972, 973, 18'-20'
New Holland 972, 973, 18'-20' Auger Trough Liner. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, NH 972, 973, 22'-24'
New Holland 972, 973, 22'-24' Auger Trough Liner. Please specify exact length when ordering. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, NH 972, 973, 25'
New Holland 972, 973, 25' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
AUGER TROUGH LINER, NH 972, 973, 30'
New Holland 972, 973, 30' Auger Trough Liner. Pop rivets and 1/64" drill bit included.
Hub axle for UMO-100 fertilizer opener, right or left side.
B4, liquid in furrow organic, is applied at 16oz/cwt. One case contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
B4, liquid in furrow organic, is applied at 16oz/cwt. Contains 1 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
BD 11001 ORANGE, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 01 Orange, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11001.5 GREEN, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 01.5 Green, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11002 YELLOW, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 02 Yellow, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11003 BLUE, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 03 Blue, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11004 RED, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 04 Red, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11005 BROWN, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 05 Brown, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11006 GRAY, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 06 Gray, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 11008 WHITE, LOW DRIFT FLAT FAN
MagnoJet, BD 110 Degree 08 White, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8001 ORANGE, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 01 Orange, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8001.5 GREEN, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 01.5 Green, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8002 YELLOW, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 02 Yellow, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8003 BLUE, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 03 Blue, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8004 RED, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 04 Red, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8005 BROWN, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 05 Brown, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8006 GRAY, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 06 Gray, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
BD 8008 WHITE, LOW DRIFT FLAT FAN
MagnoJet, BD 80 Degree 08 White, Ceramic Spray Nozzle, Low Drift Flat Fan. Preferably sold in package quantity of 24.
Bearing assembly for Case-IH 2010 and 2020; New Holland 71C, 72C, 73C, 74C, 970, 971, 972, 973, 474, 489, 492, 1465.
BEARING HOUSING, BACK, SMART-TILL
BEARING HOUSING, FRONT, SMART-TILL
BEARING KIT, 3-BOLT CLOSING WHEEL
For 3-bolt closing wheel hubs, MRT004167, with two bearings.
BEARING KIT, 4-BOLT CLOSING WHEEL
For 4-bolt closing wheel hubs, MRT004190, with single bearing.
BEARING KIT, 4-BOLT CLOSING WHEEL
For 4-bolt closing wheel hubs, MRT004175, with two bearings.
BEARING KIT, C125, WA1360, WA1332, WA1334, WA1532, ACCR1360
Bearing kit for C125, WA1360, WA1332, WA1334, WA1532 and ACCR1360 row cleaners.
BEARING KIT, FEEDERHOUSE DRUM, JD 9560 STS, 9660 STS, 9760 STS, 9860 STS
Bearing conversion kit for new 4-bolt bearing style drum. Required for John Deere 9560 STS (s/n 720100 & prior), 9660 STS (s/n 720300 & prior), 9760 STS (s/n 720400 & prior) and 9860 STS (s/n 720500 & prior). Required with HRV820242 and HRV820243.
BEARING KIT, KNFHD, CIH 810, 820, H/C GEN III
Knifehead bearings and snap rings for Case-IH 810 and 820; Hart Carter Series 2 and Generation 3.
BEARING KIT, KNFHD, CIH, HESSTON
Bearing and bushing kit for SCP083616 and SCP083617 knifeheads. Included (1) bearing, (1) bushing and (2) seals.
Bearing kit for Martin UMO-100 UMO-150..
Bearing for APL430000 notched marker disc.
Bearing for MRT004190 and MRT003903 hubs.
BEARING, C125, WA1360, WA1332, WA1334, WA1532, ACCR1360, UMO
Bearing used in all Martin row cleaners; C125, WA1360, WA1332, WA1334, WA1532, ACCR1360; Martin UMO-100 and UMO-150.
BEARING, KNFHD, CIH 810, 820, H/C GEN III
Knifehead bearing for Case-IH 810 and 820; Hart Carter Series 2 and Generation 3. Snap ring, HRV455900, required. NOTE: Requires two per knifehead.
Knifehead bearing for Case-IH 8380, 8840, 8870; Hesston 1170, 1275, 1660, 8400, 8450, 8840, 8870, 9125
BEARING, REEL ARM, ML, LEVEL II
BEARING, TAPERED ROLLER, SMART-TILL
BELT METER INSPECTION & REPAIR
S.I. Distributing will disassemble, inspect, repair and reassemble your meters. Parts not included in the price.
BELT METER KIT, CIH 5400 SS 15' 15"
Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 15' with 15" spacing with 11 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5400 SS 15' 15"
Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 15' with 15" spacing with 12 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5400 SS 20' 15"
Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 20' with 15" spacing with 14 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5400 SS 20' 15"
Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 20' with 15" spacing with 15 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5400 SS 20' 15"
Belt Meter Kit. Fits Case-IH drill model 5400 Soybean Special 20' with 15" spacing with 16 openers. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, CIH 5500 SS 30' 15"
Belt Meter Kit. Fits Case-IH drill model 5500 Soybean Special 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP 2SF30 30' 6"
Belt Meter Kit. Fits Great Plains drill model SF30 30' with 6" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP 2SF30 30' 7"
Belt Meter Kit. Fits Great Plains drill model SF30 30' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model 1205 12' with 7" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2015 20' 15"
Belt Meter Kit. Fits Great Plains drill model 2015 20' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP2SF24 24' 7.5"
Belt Meter Kit. Fits Great Plains drill model 2SF24 24' with 7.5" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3010 30' 10"
Belt Meter Kit. Fits Great Plains drill model 3010 30' with 10" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3010 30' 15"
Belt Meter Kit. Fits Great Plains drill model 3010 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD14 14' 8"
Belt Meter Kit. Fits Great Plains drill model 3PD14 14' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GP3PD14 14' 8" W/ MARKERS
Belt Meter Kit. Fits Great Plains drill model 3PD14 14' with 8" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, GPSS'87 30' 15"
Belt Meter Kit. Fits Great Plains drill model SS'87 30' with 15" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
Belt Meter Kit. Fits Great Plains drill model SS45 45' with 8" spacing. Includes a meter for each opener, transmission kits, New seed charts and Installation instructions. (This kit includes an extra SI Belt Meter).
BELT METER KIT, JD 1530 15' 15"
Belt Meter Kit. Fits John Deere drill model 1530 15' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
BELT METER KIT, JD 1530 20' 15"
Belt Meter Kit. Fits John Deere drill model 1530 20' with 15" spacing. Includes a meter for each opener, transmission kit, New seed charts and Installation instructions. (Belt Meter Kits cannot be used on JD dry fertilizer drills.) (JD drills with a seed agitator can be fitted with Belt Meters, but the agitator cannot be used).
Fits S.I. Distributing's meter test stand and Precision Planting's MeterMax test stand.
Beveled disc blade for either right or left hand UMO.
BLT, M6-1 X 16 CL10.9-PLTD, COUNTERSUNK
Countersunk section bolt for 16222 and 16223 SCH countersunk sections, for SCH knife.
BOLT, 11/16 X 2, JD MINI HOPPER
Disc mower bolt for AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson and New Idea.
Disc mower bolt for AGCO, Case-IH, Hesston, Massey Ferguson and New Idea.
Disc mower bolt for Gehl and Vicon.
Disc mower bolt for Gehl, John Deere, Kuhn and New Holland.
Disc mower bolt for Gehl, John Deere, Kuhn and New Holland.
Disc mower bolt for John Deere. Required with RSP308234, RSP308235, RSP042022 and RSP042026.
Disc mower nut for Bush Hog and Case-IH.
Disc mower bolt for Case-IH and New Holland without lifters.
Disc mower bolt for Case-IH and New Holland with lifters.
Disc mower bolt for Kuhn.
Disc mower bolt for Krone.
Disc mower bolt for AGCO, Challenger and Massey Ferguson. Required with RSP002500, RSP002400, RSP002300, RSP002200, RSP009040, RSP008040, RSP002700 and RSP002600.
Replacement boot kit for Clean Sweep air cylinder. Includes boot and clamps.
Grain Tank Bottom Unloading Auger for Case-IH 1440, 1460, 1480, 1640, 1644, 1660, 1666, 1668, 1680, 2144, 2166, 2188, 2344, 2366 and 2388.
Grain Tank Front Bottom Unloading Auger for John Deere 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9560 STS, 9570 STS, 9650 STS, 9660 STS, 9670 STS, 9750 STS and 9760 STS.
BOTTOM UNLOADING AUGER, FRONT, JD 9600, 9610, 9650
Grain Tank Front Bottom Unloading Auger for John Deere 9600, 9610 and 9650.
Grain Tank Rear Bottom Unloading Auger for John Deere 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9560 STS, 9570 STS, 9650 STS, 9660 STS, 9670 STS, 9750 STS and 9760 STS.
BOTTOM UNLOADING AUGER, REAR, JD 9600, 9610, 9650
Grain Tank Rear Bottom Unloading Auger for John Deere 9600, 9610 and 9650.
BRACKET, B-STYLE, BOULE CRISTAL
BRACKET, QUICK ATTACH, JD ME2, ME+, PRO, XP, ME5
Keeton Quick Attach Bracket available for KTN109044 and KTN109045.
BRACKET, QUICK ATTACH, KINZE 3000
Keeton Quick Attach wrap around bracket available for KTN120044 and KTN120045. Fits Kinze 3000 series only. Mounts to seed disc opener shafts and lower seed tube pin. For use with Quick Attach firmer tails only. Will fit Kinze 3000 series planters with SpeedTube, WaveVision, Bullseye or "Small" seed tubes. Does NOT fit Kinze 3000 series planters with "Large" seed tubes such as EdgeVac and 2013 & newer mechanical meter planters.
BRACKET, QUICK ATTACH, KINZE 3000, 4000
Keeton Quick Attach Bracket available for KTN131044 and KTN131045. Installs inside of row unit frame using disk scraper mounting holes. Will NOT work with spring loaded disk scrapers. For use with Quick Attach tails, FurrowJet and SmartFirmer. Will NOT work with spring loaded disk scrapers.
BRACKET, QUICK ATTACH, MONOSEM NG+4
Keeton Quick Attach Bracket available for KTN111044 and KTN111045.
BRACKET, QUICK ATTACH, WHITE 9000
Keeton Quick Attach Bracket available for KTN111044 and KTN111045.
BRACKET, R-STYLE, BOULE CRISTAL
Replacement holder for long brush in eSet.
Replacement holder for short brush in eSet.
One long and one short brush for eSet.
BRUSH METER ADAPTER PLATE, JD 7200, 1700
The Kinze Brush Meter Adapter is a conversion kit to adapt to Kinze Brush-Type Seed Meter to fit a John Deere 7200, 7300 and 1700 Series Finger Pick-Up Seed Box. NOTE: Will not work on Kinze Brush Meters manufactured after July 2010 because the shaft is now hardened and very difficult to modify.
rushless block for PopMax backing plate. Used normally for # 3 and # 4 Sunflower seeds. If the Sunflower seeds are # 1 or # 2 they should use the normal Corn Meter.
BullsEye seed tube, for 1/2" or 3/4" sensors.
BULLSEYE, JD 7200, 1700; KINZE 3000
BullsEye seed tube, for 1/2" or 3/4" sensors. Fits John Deere planter models 7200 & 1700 series. (7200 requires PPM700137)
BullsEye seed tube, for 1/2" or 3/4" sensors. Fits all Monosem planters.
BULLSEYE, WHITE 5100, 6000, 8000, 9000
BullsEye seed tube, for 1/2" or 3/4" sensors. Fits White planter models 5100 (tube modification required), 6000 & 8000 series.
BUSHING, C125, WA1345, WA1360, 7/8" OD
BUSHING, ECCENTRIC, FOR HEX BUSHING
Knifehead bushing for Case-IH 8380, 8840, 8870; Hesston 1170, 1275, 1660, 8400, 8450, 8840, 8870, 9125
BUSHING, KNFHD, NH 450, 451, 455, 456, 499, 1496
Knifehead bushing for New Holland 450, 451, 455, 456, 499 and 1496.
C-FLEX, 1" X 3", 3-HOLE, SMART-TILL
C-FLEX, 1" X 3", 4-HOLE, SMART-TILL
C125 BRACKET, JD 7200-1700, WHITE 9000, 19-5/16
Bracket for John Deere 7200-1700 and White 9000 series planters without no-till coulter to mount the C125 floating row cleaner assembly. Requires 19-5/16" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
C125 FLOATING 13" SPIKED ROW CLEANER, GREAT PLAINS TWIN ROW, RH
Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, RIGHTHAND, Includes single wheel row cleaner, mounting bracket & side treader wheel.
Optional cam adjustment for C125 row cleaners. Allows rapid adjustment of C125 units with twelve 1/4" increments. Hardware included, and Optional down pressure kit for C125 row cleaners. Provides extra down force for clearing heavier residue. Hardware included.
Optional cam adjustment for C125 row cleaners. Adjust depth in 1/4" increments.
Optional cam dial depth adjustment for WA1345 row cleaners. Adjust depth in 1/4" increments. For all John Deere and Kinze without no-till coulters.
Camera cable for VisionWorks camera systems.
Camera cable for VisionWorks camera systems.
65' camera cable for VisionWorks camera systems.
CAMERA KIT, 6R-SERIES, TRACTOR
Camera and 30 foot cable bundle for John Deere 6000R Series tractor with touch screen command center. Will require input harness VWC900026. Multiple cameras can be used depending on available OEM connectors.
CAMERA KIT, 7R, 8R, 9R SERIES TRACTOR; S-SERIES COMBINE; R4000, 400R, 600R SERIES SPRAYER
Camera and 30 foot cable bundle for John Deere S-series combines; John Deere late R4000, 400R, 600R-series sprayers; John Deere 7000R, 8000R and 9000R series tractor with touch screen command center or 2630/4640 (factory installed) display. Multiple cameras can be used depending on available OEM connectors.
CAMERA KIT, AG LEADER INTEGRA, VERSA, 4-PIN
Camera and 30 foot cable bundle for AG Leader Integra & Versa, 4-pin. Will require VWC900029. Can use up to 4 cameras.
CAMERA KIT, AG LEADER INTEGRA, VERSA, 5-PIN
Camera and 30 foot cable bundle for AG Leader In Command, 5-pin. Will require 4002671-12 or 4100816 from Ag Leader. Can use up to 4 cameras.
Camera and 30 foot cable bundle for AGCO C1000. Will require AC-A1C from AGCO. Single camera use only.
Camera and 30 foot cable bundle for AGCO C2000. Will require AC-A2C from AGCO. Can use up to 2 cameras.
Camera and 30 foot cable bundle for AGCO C3000. Will require BUSB1-TC from AGCO. Can use up to 2 cameras.
Camera and 30 foot cable bundle for Case-IH PR0 1200. Single camera use only.
CAMERA KIT, CIH PRO 700; NH INTELLVIEW III, IV
Camera and 30 foot cable bundle for Case-IH PR0 700 and New Holland Intelliview III and IV. Single camera use only.
CAMERA KIT, CIH PRO 700; NH INTELLVIEW III, IV
Camera and 30 foot cable bundle for Case-IH PR0 700 and New Holland Intelliview III and IV. Will require VWC900024. Can use up to 3 cameras.
CAMERA KIT, CIH, NH FM1000, XCN2050, FM750
Camera and 30 foot cable bundle for Case-IH and New Holland FM1000, XCN2050, FM750. Can use 1 to 4 cameras depending on model.
Camera and adapter for 2014 through 2021 Flagship Case-IH 700 Pro and New Holland Intelliview IV monitor. PLUG AND GO Combines are pre wired to three locations. At the unloading auger, in the tank and at the back of the combine. You can install in just minutes.
CAMERA KIT, CIH, NH, FLAGSHIP, 2022 & NEWER
Camera and adapter for 2014 through 2021 Flagship Case-IH 700 Pro and New Holland Intelliview IV monitor. PLUG AND GO Combines are pre wired to three locations. At the unloading auger, in the tank and at the back of the combine. You can install in just minutes.
Camera and adaptor for 2014 and newer Midrange Case-IH combines. PLUG AND GO Combines are pre wired to three locations. At the unloading auger, in the tank and at the back of the combine. You can install in just minutes.
Camera, 30 foot cable bundle and adapter for camera ready 2015 and newer Claas Jaguar 840 through 880 and 930 through 980 chopper. Pre-wired for 6 different locations.
CAMERA KIT, DATATRONIC 5, FIELDSTAR 5, NT03
Camera and 30 foot cable bundle for Datatronic 5, Fieldstar 5 and NT03 monitor. Connects to existing male s-video input on back of armrest.
CAMERA KIT, DATATRONIC 5, FIELDSTAR 5, NT03
Camera and 30 foot cable bundle for Datatronic 5, Fieldstar 5 and NT03 monitor. Connects to input on the display.
Camera and 30 foot cable bundle for Fendt tractors that are camera ready with Vairo terminals.
CAMERA KIT, JD 2630 W/O HARNESS
Camera and 30 foot cable bundle for John Deere combines and tractors with 2630 display. Will require VWC900023 for combines and VWC900022 for tractors. Can use up to 3 cameras.
CAMERA KIT, JD 4000R-SERIES SPRAYER
Camera and adaptor for early John Deere 4000R-series sprayers that are camera ready. Includes adapter that can accept two cameras. Connects to 6-pin connector behind panel under the back window.
CAMERA KIT, JD 4640 NON-FACTORY, COMBINE
Camera and 30 foot cable bundle for John Deere combines and tractors with 4640 display. Will require VWC900027 for combines and VWC900028 for tractors. Can use up to 4 cameras.
CAMERA KIT, JD S-SERIES COMBINE
Camera and adaptor for John Deere 2017 and newer camera ready combines. Multiple cameras can be used depending on available OEM connectors.
Camera, 30 foot cable bundle and adapter for Lexion 670 through 780 camera ready combines. Pre-wired for 6 different locations.
Camera and 30 foot cable bundle for Outback Max. Will require 051-0285-000 from Outback. Can use up to 4 cameras.
Camera and 30 foot cable bundle for Raven Viper 4. Will require VWC900031. Can use up to 4 cameras.
Camera and 30 foot cable bundle for Raven Viper 4. Will require 115-0172-077 from Raven. Can use up to 4 cameras.
CAMERA KIT, TEEJET MATRIX PRO 570G, 840G
Camera and 30 foot cable bundle for TeeJet Matrix Pro 570G and 840G. Can use up to 8 cameras with TeeJet video selection module.
CAMERA KIT, TRIMBLE MX1000, TMX2050, CFX750
Camera and 30 foot cable bundle for Trimble FMX1000, TMX2050 and CFX750. Can use 1 to 4 cameras depending on model.
120 degree (side view) high definition camera for VisionWorks camera systems. Cable sold seprately.
170 degree (wide view) high definition camera for VisionWorks camera systems. Cable sold separately.
90 degree high definition camera for VisionWorks standard camera systems. Cable sold seprately.
Ready Vision battery operated WiFi camera. Transmit to any iOS or Android device. Requires no internet or cellular service. Real-Time video not guaranteed.
CAMERA, HD, WIRELESS, 140 DEGREE
High definition 140 degree wireless camera.
CAMERA, HD, WIRELESS, 90 DEGREE
High definition 90 degree wireless camera.
Camera and 30 foot cable bundle for Trimble FMX1000, TMX2050 and CFX750. Can use 1 to 4 cameras depending on model.
CAMERA, SD, 120 DEGREE, SIDE VIEW
120 degree (side view) standard definition camera for VisionWorks camera systems.
140 degree (wide view) standard definition camera for VisionWorks camera systems. Cable sold separately.
90 degree standard definition camera for VisionWorks camera systems. Cable sold seprately.
High resolution camera for VisionWorks wireless camera systems.
Ready Vision heavy duty WiFi camera. Transmit to any iOS or Android device. Requires no internet or cellular service. 12V constant power supply. Real-Time video not guaranteed.
CAP, SHORT, BD, AD, ADGA, WHITE
MagnoJet, Cap for Standard Flat Fan Nozzles. Fits MagnoJet nozzles starting with MNJ20XXXX & MNJ22XXXX. Also fits TeeJet TP, XR, DG, TT, TTJ60, AIXR & OC Series tips. Also fits Hypro ULD, GA, LD, VP, TR, OC, R & E Series tips. Rubber seal sold separately.
CBLT, M10-1.5 X 45 CL8.8-PLTD, SPECIAL SHOULDER; MACDON
Carriage bolt, M10-1.5 X 45 GR8.8-PLTD, for SCH MacDon skid plates.
CENTER SKID SHOE ASSEMBLY, CIH, MACDON, NH, 14 X 16
Case-IH 2162/2152/2142; MacDon FD75/FD70/D60/D50; New Holland 86C/83C/82C- Center Skid Shoe Assembly- 14"x16" - 3/8" Thick - Predrilled. Not included in kits. Please order separately.
CHAIN GUIDE, POLY, 3 HOLE, JD 4400, 4420, 6600, 6620, 7700, 7720, 8800, 8820
4 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series; New Holland 96C, 96D, 98C and 98D series cornheads with 30" rows.
CHARCOAL, BASQUES, 17.6 LBS BAG
Sugar maple hardwood lump charcoal made from 100% Canadian hardwood logs. Offers a unique sweet sugar maple flavor given by the sugar maple tree. A hardwood that gives a higher intense heat. Lights quickly and last longer. The choice of chefs.
CIH RUNNER, OEM, RECONDITIONED, GEN 1, GREASEABLE WB
Reconditioned OEM replacement greaseable wobble box runner for Generation I 1010, 1020 headers. Required with serial numbers JJC0215000 and lower.
CIH RUNNER, OEM, RECONDITIONED, GEN 2, EARLY OIL BATH WB
Reconditioned OEM replacement oil bath wobble box runner for Generation II 1010, 1020 headers. Required with serial numbers JJC0215001-JJC0323604.
CIH RUNNER, OEM, RECONDITIONED, GEN 3, LATE OIL BATH WB
Reconditioned OEM replacement oil bath wobble box runner for Generation III 1010, 1020 headers. Required with serial numbers JJC0323605 and up; CBJ023001 and up.
Clean Sweep Air Cylinder. One is required for each row cleaner.
CLEAN SWEEP AIR LINE KIT, 48-ROW
Clean Sweep Air Line Kit for a 48-row planter. Supplies air from compressor to the air cylinder. NOTE: Only 1 required per planter.
CLEAN SWEEP AIR LINE KIT, 54-ROW
Clean Sweep Air Line Kit for a 48-row planter. Supplies air from compressor to the air cylinder. NOTE: Only 1 required per planter.
CLEAN SWEEP BRACKET, C125MTR, JD 7200, 1700
Mounts the Clean Sweep cylinder to the row cleaner. For Martin C125 with no-till coulter. Will fit John Deere 7200 and 1700 series. PPM726530 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, C125MTS, CIH, JD, KINZE, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Martin C125 without no-till coulter. Will fit John Deere 7000, 7100, 7200 and 1700 series; Kinze; White 6000 and 8000 series; Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, KINZE RC/NTC, 2000, 3000
Mounts the Clean Sweep cylinder to the row cleaner. For Kinze OEM 2000, 3000 series OEM row cleaner/no-till coulter combo.
CLEAN SWEEP BRACKET, KINZE RC/NTC, 4900
Mounts the Clean Sweep cylinder to the row cleaner. For Kinze OEM 4900 series OEM row cleaner/no-till coulter combo.
CLEAN SWEEP BRACKET, WA1360, BDC
Mounts the Clean Sweep cylinder to the row cleaner. For Martin 1360 with no-till coulter. Will fit John Deere 7200 and 1700 series. PPM726530 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-007, JD 7200, 1700
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-007 on John Deere 7200, 7300 and 1700 series; Kinze. PPM755202 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-013, JD, KINZE, WHITE, NARROW ROW
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 15, 20 and 22" rows; model 2967-013 on John Deere 7000, 7100; Kinze; White 6000 and 8000 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-014, CASE-IH, NARROW ROW
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 15, 20 and 22" rows; model 2967-014 on Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-029, JD, KINZE, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 30 and 40" rows; model 2967-029 on John Deere 7000, 7100; Kinze; White 6000, 8000 and 9000 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-035, JD 7000, 7200, 1700, KZ, WHITE, SHORT BRKT
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-035 with short bracket on John Deere 7000, 7100, 7200, 7300 and 1700 series; Kinze; White 6000 and 8000 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-035, JD 7200, 1700; KINZE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-035 on John Deere 7200, 7300 and 1700 series; Kinze. PPM755202 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-042, 043, 042A, 043A, JD 7200, 1700
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-042 and 2967-043 on John Deere 7200, 7300 and 1700 series. PPM755202 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-097, CASE-IH
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 30 and 40" rows; model 2967-097 on Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-115, JD 7000, 7200, 1700, KINZE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter residue manager on Yetter 2960-127 no-till coulter; model Titan 2967-115 on John Deere 7000, 7100, 7200, 7300 and 1700 series; Kinze. NOTE: 1 required per row.
CLEAN SWEEP CONTROL KIT, W/O COMPRESSOR
Includes controller for planters that have the 20/20 Airforce installed. A Mounting Kit is NOT required. NOTE: Only 1 required per planter.
CLEAN SWEEP PIN KIT, YETTER 2967-013A, 2967-014A, 2967-029A, 2967-097A, 2016-
Mounts the Clean Sweep cylinder to the row cleaner. One is required for each row cleaner. Kit includes cylinder pins and hardware only. Required with Yetter 2967-013A, 2967-14A, 2967-029A, 2967-097A.
Clip for Steel tine on wood bat reel. Tines sold sold separately.
CLOSING WHEEL BRACKET, JD 7000, 7100, NARROW, ROLL PIN
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts roll pin style closing wheels. The spacing between the closing wheels will be 3/4" to 1" instead of the standard 1-1/4".
CLOSING WHEEL KIT, CIH 2000 SERIES
Case-IH 9" Camber Adjust Closing Kit for Case-IH 2000 series planters. Changes the angle of Case-IH standard stance to v-style gathering action. Packer wheel and razor wheels sold separately.
CLOSING WHEEL, CAST IRON, BOLT-ON, 5/8", M16
Cast Iron closing wheel for Kinze 1994 & newer, White 6000, 8000 and 9000 series planters that use 5/8" or 16mm bolt to attach closing wheels. Bearing ID of 5/8". Price is each.
CLOSING WHEEL, FCRUSHER, BOLT-ON, 5/8", M16
fCrusher cast closing wheel for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
CLOSING WHEEL, FINGER-TILL, ROLL PIN
Finger-Till closing wheel for John Deere, Kinze and White planters where closing wheels are attached with roll pin. Water pump style bearing.
CLOSING WHEEL, INSERT, POLY, YETTER TWISTER, BOLT-ON, 5/8", M16
Yetter closing wheel insert for factory 1" x 12" poly closing wheel assemblies. Inlcludes two poly spike rings only.
CLOSING WHEEL, RUBBER, BOLT-ON, 5/8", M16
Rubber closing wheel for John Deere MaxEmerge Plus, Pro, XP, XP Pro and MaxEmerge 5; John Deere 1530 and 1535 drills; Kinze 1994 & newer; White 6000, 8000 and 9000; Case-IH SDX30 and SDX40 air drills; Monosem plus model planters. Replaces John Deere AA39968; Kinze GA6434; White 854262; Case-IH 87695406; Monosem 7071.N. This rubber closing wheel is used on planters that use the 5/8" bolt to attached closing wheels. Bearing ID of 5/8".
CLOSING WHEEL, RUBBER, BOLT-ON, M17
Rubber closing wheel for John Deere 7200, 7300 and 1700 series planter and John Deere 455, 750 and 1520 drills with a 17mm threaded spindle on closing wheel frame. Bearing ID of 17mm. Replaces John Deere AA43898 and AA34211.
CLOSING WHEEL, RUBBER, ROLL PIN
Rubber closing wheel for John Deere 7000, 7100 planters, John Deere 515, 520 drills, Kinze 1993 & prior planters and Monosem early model planters where closing wheels are attached with roll pin. Water pump style bearing. Replaces John Deere AA43899, Kinze GA3086 and Monosem 7074.
CONCAVE KIT, MAD, CIH 1680, 1688, 2188, 2388, 2588, 7088, 7130, 7140
MAD Concave available for Case-IH 1680, 1688, 2188, 2388, 2588, 7088, 7130 and 7140. Compatible with the following crops: wheat, flax, durum, canola, peas, corn, soybeans, barley and oats. Includes two split frames, one transition lip, two .225 inserts, two .375 inserts, two right hand finger grate inserts, and two left hand finger grate inserts.
CONCAVE KIT, MAD, CIH 1680, 1688, 2188, 2388, 2588, 7088, 7130, 7140
MAD Concave available for Case-IH 1680, 16MAD Concave available for Case-IH 1680, 1688, 2188, 2388, 2588, 7088, 7130 and 7140. Compatible with the following crops: canola, peas, barley and oats.
CONCAVE KIT, MAD, CIH 1680, 1688, 2188, 2388, 2588, 7088, 7130, 7140
MAD Concave available for Case-IH 1680, 1688, 2188, 2388, 2588, 7088, 7130 and 7140. Compatible with the following crops: wheat, flax and durum. Includes two split frames, one transition lip, two .225 inserts, and two .375 inserts.
CONCAVE KIT, MAD, CIH, FLAGSHIP, 2004 & NEWER
MAD Concave available for Case-IH 2004 & newer Flagship. Compatible with the following crops: hard thresh wheat, flax, easy thresh wheat, barley, soybeans, canola, peas and corn. Includes one right hand .225 insert, one left hand .225 insert, one right hand .300 insert, one left hand .300 insert, one right hand .375 insert, one left hand .375 insert, two right hand finger grate inserts, and two left hand finger grate inserts.
CONCAVE KIT, MAD, CIH, FLAGSHIP, 2004 & NEWER
MAD Concave available for Case-IH 2004 & newer Flagship. Compatible with the following crops: barley, soybeans, canola, peas and corn. Includes one right hand .375 insert, one left hand .375 insert, two right hand finger grate inserts, and two left hand finger grate inserts.
CONCAVE KIT, MAD, JD STS, S-SERIES
MAD Concave available for John Deere 9650 STS, 9760 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS; S650, S660, S670, S680, S690
S760, S770, S780, S790. Compatible with the following crops: canola, peas, soybeans, barley and oats. Includes two split frames, one transition lip, two .375 inserts, one right hand finger grate insert, one left hand finger grate insert, and one 1-piece .435 concave.
CONCAVE KIT, MAD, JD STS, S-SERIES
MAD Concave available for John Deere 9650 STS, 9760 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS; S650, S660, S670, S680, S690
S760, S770, S780, S790. Compatible with the following crops: wheat and cereals. Includes two split frames, one transition lip, two .225 inserts, two .375 inserts, and one 1-piece .435 concave.
MAD Concave available for John Deere X9. Compatible with the following crops: wheat and flax. Includes six .225 inserts, and six .435 inserts.
MAD Concave available for John Deere X9. Compatible with the following crops: canola, barley, oats.
MAD Concave available for John Deere X9. Compatible with the following crops: canola, barley, oats, wheat, flax.
MAD Concave available for New Holland with 22" rotor. Compatible with the following crops: hard thresh wheat, flax, corn, barley, soybeans, canola and peas. Includes two frames, two .225 inserts, two .375 inserts, two .300 extensions, two .500 extensions, and four finger grate inserts.
MAD Concave available for New Holland with 22" rotor. Compatible with the following crops: corn. Includes two frames, two .500 extensions, and four finger grate inserts.
MAD Concave available for New Holland with 22" rotor. Compatible with the following crops: corn, barley, soybeans, canola and peas. Includes two frames, two .375 inserts, two .300 extensions, two .500 extensions, and four finger grate inserts.
Thrash Master Concave System for all crops. Will fit Case-IH Flagship 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010.
Thrash Master Concave System for corn and soybeans only. Will fit John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690.
Thrash Master Concave System for all crops. Will fit John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690.
Thrash Master Concave System for corn and soybeans only. Will fit Case-IH 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010.
CONNECTOR KIT, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 14SPI
OEM connector kit with 3 fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system.
CONNECTOR KIT, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 7SPI
OEM connector kit with 3 coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system.
CONNECTOR KIT, JD 600F, 600FD, 700FD, 900D, 14SPI
OEM connector kit with 3 fine tooth sections for John Deere 600 series auger platforms, 600 and 700 series flex draper platforms and 900 series draper platforms with 4" cutting system.
CONNECTOR KIT, JD 600F, 600FD, 700FD, 900D, 7SPI
OEM connector kit with 3 coarse tooth sections for John Deere 600 series auger platforms, 600 and 700 series flex draper platforms and 900 series draper platforms with 4" cutting system.
CONNECTOR, CENTER, FEMALE, SINGLE
Female connector for HCC Gateway.
CONNECTOR, CENTER, LONG, SINGLE
Long center connector for HCC Gateway.
CONNECTOR, CENTER, MALE, SINGLE
Male connector for HCC Gateway.
CONNECTOR, CENTER, SHORT, SINGLE
Short center connector for HCC Gateway.
Left hand end connector for HCC Gateway.
Right hand end connector for HCC Gateway.
CORNHEAD AUGER, CIH 900/1000 SERIES, 6R, NARROW
Cornhead auger for Case-IH 900 and 1000 series 6 row narrow cornhead.
CORNHEAD AUGER, CIH 900/1000 SERIES, 8R, NARROW
Cornhead auger for Case-IH 900 and 1000 series 8 row narrow cornhead.
Cornhead auger for John Deere 693, 22" pitch. Will work with serial number 670451 and higher.
Cornhead auger for John Deere 893, 22" pitch. Will work with serial number 670051 and higher.
COVER, PRECISION METER, JD 7000, KINZE 2000
Black plastic cover for John Deere 7000, 7100 and Kinze 2000 series Precision meters.
CROP DIVIDERS W/ MARKER RODS, PAIR, JD 900F, 600F, 600D, 600FD
Pair of row dividers with marker rods for John Deere 900F, 600F, 600D, 600FD grain platforms.
CROP DIVIDERS W/ MARKER RODS, PAIR, CIH 1020
Pair of row dividers with marker rods for Case-IH 1020 grain platform.
CROP DIVIDERS W/O MARKER RODS, PAIR, CIH 1020
Pair of row dividers without marker rods for Case-IH 1020 grain platform.
CROP DIVIDERS, W/O MARKER RODS, PAIR, JD 900F, 600F, 600D, 600FD
Pair of row dividers without marker rods for John Deere 900F, 600F, 600D, 600FD grain platforms.
CrownFx, seed coating, is applied at 2oz/cwt. One case contains 4 x 1 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
CrownFx, Foliar application, is applied at 16oz/cwt. One case contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
CrownFx, Foliar application, is applied at 16oz/cwt. Contains 1 x 2.5 gallon jug. This product is a biological. Any returns require pre-approval due to shelf life.
CrownFx, seed coating, is applied at 2oz/cwt. Contains 1 x 1 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
CRP-12, 7" WING, CALDWELL GRABER, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit SH Series and Graber subsoilers.
CRP-15, 7" WING, KOENIG, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2 shanks. Will fit Koenig DWK-series.
CRP-15N, 2-1/2" NO WINGS, KOENIG, 1-1/2" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/2 shanks. Will fit Koenig DWK-series.
CRP-16, 7" WING, LANEY, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit Laney Extra Heavy Duty Plow.
CRP-19, 7" WING, WORKSAVER V-RIPPER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Worksave R-130 V-Ripper.
CRP-20, 2-1/2" NO WINGS, BRILLION ST-30 RIPPER STRIPPER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit ST-30 Ripper Stripper.
CRP-21, 2-1/2" NO WINGS, ALLIS #9, 1-1/8" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/8" shanks. Will fit Allis #9 Subsoiler.
CRP-28, 7" WING, DAMMER-DIKER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Dammer-Diker Tillage Master.
CRP-34, 7" WING, BESLER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Besler 4000 series.
CRP-37, 7" WING, ORTHMAN, QUINSTAR, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Orthman, Quinstar SoilShark.
CRP-9, 7" WING, BRENT EARTHQUAKE & CPC, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Brent Earthquake and CPC.
CRP-9-10, 10" WING, BRENT EARTHQUAKE & CPC, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Brent Earthquake and CPC.
This popular cup holder mount inserts into your cup holder and expands for a solid hold and gives you a conveient, out of the way, place to mount a 5" or 7" Visionworks monitor and doubles as a great cell phone holder. No more monitors in your windshield.
CUTTERBAR SKID SHOE, CIH, MACDON, NH
Cutterbar skid shoe available for Case-IH 2052 (after s/n CCC0014710), 2062 (after s/n CC0015328), 2142, 2152, 2162; MacDon 973 and 974 (2006 & newer), D50, D60, FD70, FD75, D125, D130, D135, D140, D145, FD130, FD135, FD140, FD145; New Holland 84C (after serial number PPP001119), 82C, 83C, 86C. Only compatible with OEM cutting system.
BruteLube multi-purpose cutting and tapping fluid. Speciality formulated to extend tool life and reduce chip welding.
CYLINDER BRACKET, WA1360, UMO-100, LH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1360 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, LH. NOTE: One required per row.
CYLINDER BRACKET, WA1360, UMO-100, RH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1360 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, RH. NOTE: One required per row.
CYLINDER TOP BRACKET, WA1345, UMO-100, LH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1345 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, RH. NOTE: One required per row.
CYLINDER TOP BRACKET, WA1345, UMO-100, RH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1345 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, LH. NOTE: One required per row.
Attaches to all D-Series Axles for Martin Row Cleaners.
D-TUBE ASSEMBLY-PRO (2008+ METAL VENT)
D-Tube Assembly for eSet Pro Series.
Replacement screen for D-tube on Pro-Series eSets. These screens are not needed on the JD ME5 Pro-Series or Standard eSets.
The garden, “tool” that wipes out weeds with no drift, even on a windy day. This, unique to the industry, hand-held weed wiper puts solution exactly where you want and will save you money on chemical use. The Hand-Held Dauber gives the user more options when it comes to deciding what solution to use when attacking your intrusive plants or weeds. The cellulose sponge design has a check valve that can be turned to the off position when the user is not applying heavy doses of chemical to cut off the gravity fed flow. The Daubers lightweight design makes using our Dauber convenient for lawn and garden use.
DELTAFORCE BRACKET, JD, BOTTOM
DeltaForce Bracket for John Deere planters, this one is installed on the bottom parallel arms.
DeltaForce Bracket for John Deere planters, this one is installed on the row unit support plate.
DEPTH-A-MATIC, JD 7000, 7100, KINZE
Depth-A-Matic for John Deere 7000, 7100 & Kinze (Except Kinze 3000 Series) And New Idea Planters
DEPTH-A-MATIC, JD 7200, 7300, 1700
Depth-A-Matic for John Deere 7200, 7300 & 1700 Series Planters. Fits MaxEmerge 2 and MaxEmerge Plus row units. Does NOT fit John Deere XP and XP Pro-Series row units.
DIMPLE CLOSING WHEEL, 20-PT, JD 1560-1990
Drill Dimple Closing Wheel, single, dimple closing wheel. Fits John Deere drill models 1560, 1590, 1860 & 1890. (SCW1564D) Less aggressive than spiked wheels.
DIMPLE CLOSING WHEELS, 20-PT, ROLL PIN
13", 20 point dimple closing wheels for John Deere, Kinze and White planters where closing wheels are attached with roll pin.
DISC ASSEMBLY, 15.75" X 3.5MM, FDN
Disc opener assembly, 15.75" diameter x 3.5mm thick. Will fit Landoll 5210, 5211, 5530, 5531, 5540 and 5550 drills.
DISC ASSEMBLY, 204B, 13.5" X 3MM, FDN
Disc opener assembly, 13.5" diameter x 3mm thick. Includes blade, single 204 bearing, hub and plastic dust cap. Will fit White 5000 series planters.
DISC ASSEMBLY, 204B, 15" X 3.5MM, CAST HUB, CELSAN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, 204 bearing, cast hub and steel dust cap. Will fit John Deere MaxEmerge XP, XP Pro, MaxEmerge 5.
DISC ASSEMBLY, 204B, 15" X 3.5MM, FDN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, single 204 bearing, hub and plastic dust cap. Forges De Niaux (FDN) blade with 3 zones of hardness. Will fit Kinze 2000, 3000, 4000 series; White 6000, 8000 series.
DISC ASSEMBLY, 204B, 15" X 3.5MM, FDN
Disc opener assembly, 15" diameter x 3.5mm thick. Includes blade, double 204 bearing, hub and plastic dust cap. Will fit Harvest International Laser Pro 1; John Deere MaxEmerge XP, XP Pro, MaxEmerge 5; Kinze 3000, 4000 series. Kinze 3000 and 4000 require one HDW220049 hardware kit per row.
DISC ASSEMBLY, 204B, 15.8" X 3.5MM, CAST HUB, FDN
Disc opener assembly, 15.8" diameter x 3.5mm thick. Includes blade, double 204 bearing, cast hub and dust cap. Will fit White 9000 series planters.
DISC ASSEMBLY, 205B, 13.5" X 4MM, CELSAN
Disc opener assembly, 13.5" diameter x 4mm thick. Includes blade, double 205 bearing and hub. WIll fit Great Plains 13.5" double disc opener drills. Confirm diameter of OEM blade before ordering.
DISC ASSEMBLY, 205B, 13.5" X 4MM, FDN
Disc opener assembly, 13.5" diameter x 4mm thick. Includes blade, double 205 bearing and hub. WIll fit Great Plains 13.5" double disc opener drills. Confirm diameter of OEM blade before ordering.
DISC ASSEMBLY, 205B, 15" X 4.5MM, LP CAST HUB
Xtreme Duty disc opener assembly, 15" diameter x 4.5mm thick. Includes blade, 205 bearing and low profile cast hub. Will fit Case-IH 2100 series planters.
DISC ASSEMBLY, 205B, 15" X 4MM
Disc opener assembly, 15" diameter x 4mm thick. Includes blade, double 205 bearing, hub and P52024 plastic dust cap. Will fit Monosem Plus series planters.
DISC ASSEMBLY, 205B, 15" X 4MM, CELSAN
Disc opener assembly, 15" diameter x 4mm thick. Includes blade, 205 bearing and hub. Celsan blade with single heat treat. Will fit Great Plains Yield Pro Planters 1999 and newer; Great Plains HD drills 1999 and newer.
DISC ASSEMBLY, 205B, 15" X 4MM, FDN
Disc opener assembly, 15" diameter x 4mm thick. Includes blade, double 205 bearing and hub. Forges De Niaux (FDN) blade with 3 zones of hardness. Will fit Great Plains Yield Pro Planters 1999 and newer; Great Plains HD drills 1999 and newer.
DISC ASSEMBLY, NOTCHED, 204B, 16" X 4MM, FDN
Disc opener notched assembly, 15" diameter x 3.5mm thick. Includes blade, hub and (2) 204 bearings. Will fit Crustbuster All-Plant 3400, 4000, 4020, 4025, 4030, 4560, 4610, 4613, 4615, 4620, 4740, 4745 and 4750 drills.
DISC ASSEMBLY, SMOOTH, 204B, 16" X 4MM, FDN
Disc opener smooth assembly, 15" diametDisc opener smooth assembly, 16" diameter x 4mm thick. Includes blade, hub and (2) 204 bearings. Will fit Crustbuster All-Plant 3400, 4000, 4020, 4025, 4030, 4560, 4610, 4613, 4615, 4620, 4740, 4745 and 4750 drills.
Disc opener blade only, 13.5" diameter x 3mm thick. Will fit John Deere conventional grain drills/air seeders 730, 770, 780, 1060; John Deere with aluminum seed boots 450, 455, 515, 520, 1520, 8100, 8200, 8250, 8300, 8350, 8500, 8550, 9400, 9450, BD1108, BD1110, BD1113.
DISC BLADE, 20" X 6.5MM, NOTCHED
20" x 6.5mm notched high speed compact disc blade for Degelman Pro-Till 20, 26, 33, 40; Kinze Mach Till 201, 261, 331, 401.
DISC BLADE, 20" X 6.5MM, NOTCHED
20" x 6.5mm notched high speed compact disc blade for John Deere 2680H and Norwood Kwik-Till.
DISC BLADE, 20" X 6.5MM, SMOOTH
20" x 6.5mm smooth high speed compact disc blade for Degelman Pro-Till 20, 26, 33, 40; Kinze Mach Till 201, 261, 331, 401.
DISC BLADE, 20" X 6.5MM, SMOOTH
20" x 6.5mm smooth high speed compact disc blade for John Deere 2680H and Norwood Kwik-Till.
DISC BLADE, 20" X 6MM, NOTCHED
20" x 6mm notched high speed compact disc blade for Horsch Joker.
DISC BLADE, 22" X 6.5MM, NOTCHED
22" x 6.5mm notched high speed compact disc blade for Degelman Pro-Till 20, 26, 33, 40; Kinze Mach Till 201, 261, 331, 401.
DISC BLADE, 22" X 6.5MM, NOTCHED
22" x 6.5mm notched high speed compact disc blade for Case-IH Speed-Tiller and K-Line Speedtiller.
DISC BLADE, 22" X 6.5MM, V-NOTCH
22" x 6.5mm v-notch high speed compact disc blade for Degelman Pro-Till 20, 26, 33, 40; Kinze Mach Till 201, 261, 331, 401.
DISC BLADE, 24" X 6.5MM, NOTCHED
24" x 6.5mm notched high speed compact disc blade for Case-IH Speed-Tiller and K-Line Speedtiller.
DISC BLADE, 24" X 6.5MM, NOTCHED, CELSAN
24" x 6.5mm notched high speed compact disc blade for Landoll. Celsan blade with single heat treat.
DISC BLADE, 24" X 6.5MM, NOTCHED, FDN
24" x 6.5mm notched high speed compact disc blade for Landoll. Forges De Niaux (FDN) blade with 3 zones of hardness.
Optional down pressure kit for C125 row cleaners. Provides extra down force for clearing heavier residue. Hardware included.
This Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range. Will fit all Kinze and John Deere with steel (not cast) parallel linkage arms providing there is room on the inside of the arms
DOWN PRESSURE SPRING KIT W/PLATE
This Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range. Will fit all Kinze and John Deere with steel (not cast) parallel linkage arms providing there is room on the inside of the arms.
7/16" drill bit for PPS flanged bushing kit.
Replacement Drive Wheel for finger meters.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 20'
20' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 110 Duck Foot tines.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 25'
25' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 140 Duck Foot tines.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 30'
30' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 170 Duck Foot tines.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 35'
35' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 200 Duck Foot tines.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 40'
40' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 230 Duck Foot tines.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 45'
45' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 260 Duck Foot tines.
DUCK FOOT KIT, AGCO, CIH, CLAAS, JD, M/F, NH, 50'
50' Duck Foot paddle tine kit for AGCO, Case-IH, Claas, John Deere, Massey-Ferguson and New Holland. Will fit AGCO 300, 400, 500, 5100, 700, 800, 7000, 7200, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020, 3025, 3030, 3035; Claas Maxflex & Maxflow 750-1200, G525, G530, F525, F530, F750, F900, S450-900; 900R, 900F, 600R, 600F, 600FD with s/n less than 785,000; Massey Ferguson 5100, 5200, 7000, 7200, 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 71C, 72C, 73C, 74C, 88C, 92C, 94C, 740, 971, 973. Includes 290 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 20'
20' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 110 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 25'
25' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 140 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 30'
30' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 170 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 35'
35' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 200 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 40'
40' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 230 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 45'
45' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 260 Duck Foot tines.
DUCK FOOT KIT, CIH, CRARY, GTS, JD, MACDON, NH, 50'
50' Duck Foot paddle tine kit for Case-IH, Crary, GTS, John Deere, MacDon and New Holland. Will fit Case-IH 3152, 3162, 4152, 4162, DH213, DH253, DH303, DH363, DH403, 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45; Crary; GTS; 600FD (after s/n 785,000), 700FD, HDR, HDR, RDF; MacDon 973, 974: New Holland 880CF, 840CD. Includes 290 Duck Foot tines.
DUCK FOOT KIT, CIH, JD, MACDON, NH, 25'
25' Duck Foot paddle tine kit for Case-IH, John Deere, MacDon and New Holland. Will fit Case-IH 2142, 2152, 2162; John Deere 430, 435, 440; MacDon FD and D series; New Holland 82C, 83C, 86C. Includes 115 Duck Foot tines.
DUCK FOOT KIT, CIH, JD, MACDON, NH, 30'
30' Duck Foot paddle tine kit for Case-IH, John Deere, MacDon and New Holland. Will fit Case-IH 2142, 2152, 2162; John Deere 430, 435, 440; MacDon FD and D series; New Holland 82C, 83C, 86C. Includes 140 Duck Foot tines.
DUCK FOOT KIT, CIH, JD, MACDON, NH, 35'
35' Duck Foot paddle tine kit for Case-IH, John Deere, MacDon and New Holland. Will fit Case-IH 2142, 2152, 2162; John Deere 430, 435, 440; MacDon FD and D series; New Holland 82C, 83C, 86C. Includes 165 Duck Foot tines.
DUCK FOOT KIT, CIH, JD, MACDON, NH, 40'
40' Duck Foot paddle tine kit for Case-IH, John Deere, MacDon and New Holland. Will fit Case-IH 2142, 2152, 2162; John Deere 430, 435, 440; MacDon FD and D series; New Holland 82C, 83C, 86C. Includes 190 Duck Foot tines.
DUCK FOOT KIT, CIH, JD, MACDON, NH, 45'
45' Duck Foot paddle tine kit for Case-IH, John Deere, MacDon and New Holland. Will fit Case-IH 2142, 2152, 2162; John Deere 430, 435, 440; MacDon FD and D series; New Holland 82C, 83C, 86C. Includes 215 Duck Foot tines.
DUCK FOOT KIT, CIH, JD, MACDON, NH, 50'
50' Duck Foot paddle tine kit for Case-IH, John Deere, MacDon and New Holland. Will fit Case-IH 2142, 2152, 2162; John Deere 430, 435, 440; MacDon FD and D series; New Holland 82C, 83C, 86C. Includes 240 Duck Foot tines.
20' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 110 Duck Foot tines.
25' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 140 Duck Foot tines.
30' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 170 Duck Foot tines.
35' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 200 Duck Foot tines.
40' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 230 Duck Foot tines.
45' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 260 Duck Foot tines.
50' Duck Foot paddle tine kit for Claas Convio 2017 and newer grain platforms. Includes 290 Duck Foot tines.
DUCK FOOT KIT, GERINGHOFF, MACDON, 25'
25' Duck Foot paddle tine kit for Geringhoff and MacDon. Will fit Geringhoff 2020 & newer TruFlex and TruFlex Razor; MacDon 973, 974. Includes 115 Duck Foot tines.
DUCK FOOT KIT, GERINGHOFF, MACDON, 30'
30' Duck Foot paddle tine kit for Geringhoff and MacDon. Will fit Geringhoff 2020 & newer TruFlex and TruFlex razor; MacDon 973, 974. Includes 140 Duck Foot tines.
DUCK FOOT KIT, GERINGHOFF, MACDON, 35'
35' Duck Foot paddle tine kit for Geringhoff and MacDon. Will fit Geringhoff 2020 & newer TruFlex and TruFlex razor; MacDon 973, 974. Includes 165 Duck Foot tines.
DUCK FOOT KIT, GERINGHOFF, MACDON, 40'
40' Duck Foot paddle tine kit for Geringhoff and MacDon. Will fit Geringhoff 2020 & newer TruFlex and TruFlex razor; MacDon 973, 974. Includes 190 Duck Foot tines.
DUCK FOOT KIT, GERINGHOFF, MACDON, 45'
45' Duck Foot paddle tine kit for Geringhoff and MacDon. Will fit Geringhoff 2020 & newer TruFlex and TruFlex razor; MacDon 973, 974. Includes 215 Duck Foot tines.
DUCK FOOT KIT, GERINGHOFF, MACDON, 50'
50' Duck Foot paddle tine kit for Geringhoff and MacDon. Will fit Geringhoff 2020 & newer TruFlex and TruFlex razor; MacDon 973, 974. Includes 240 Duck Foot tines.
Single bag of Dust + B4 for corn. One bag of Dust + B4 will treat 50 units of seed at 34,000 population.
DUST + TERRASYM 401, SOYBEANS, CASE OF 8
Case of 8 bags of Dust + Terrasym 401 for soybeans. One bag of Dust + Terrasym 401 will treat 40 units of seed.
DUST + TERRASYM 401, SOYBEANS, SINGLE
Single bag of Dust + Terrasym 401 for soybeans. One bag of Dust + Terrasym 401 will treat 40 units of seed.
DUST + TERRASYM 450 + TS201, CORN, SINGLE
Single bag of Dust + Terrasym 450 + TS201 for corn. One bag of Dust + Terrasym 450 + TS201 will treat 50 units of seed at 34,000 population.
DUST + TERRASYM 450, CORN, CASE OF 4
Case of 4 bags of Dust + Terrasym 450 for corn. One bag of Dust + Terrasym 450 will treat 50 units of seed.
DUST + TERRASYM 450, CORN, SINGLE
Single bag of Dust + Terrasym 450 for corn. One bag of Dust + Terrasym 450 will treat 50 units of seed.
Fits on Martin 3-bolt closing wheel hubs, MRT004167 and MRT003903.
DUST CAP, 4-BOLT SCW, C125, WA1360, WA1332, WA1334, WA1532, ACCR1360
Fits all Martin row cleaners and Martin 4-bolt closing wheel hubs.
Disc opener assembly, 18" diameter x 3.5mm thick. Will fit 500, 500T drills; New Holland P2080, P2085. Will NOT fit SDX series.
DUST CAP, PLT110061, PLT110070
Dust cap for Finger-Till, PLT110061, wheel only.
Low Mu Tech Soy Protein 1-lb. planter lubricant. Insecticide-free. Carcinogen-free. Does not abrade seeds. Dust is up to 20 times less abrasive to your seeds. Made entirely from U.S. soybeans. Designed for center fill (CCS) planters where .33 to .40 ounce is recommended per unit of seed. One 1 lb. bag treats 40-50 units of seed, so it will treat approximately 120 acres of corn at 30,000 seeds/acre or 45 acres of soybeans at 140,000 seeds/acre.
Low Mu Tech Soy Protein 14 lbs planter lubricant. Insecticide-free. Carcinogen-free. Does not abrade seeds. Dust is up to 20 times less abrasive to your seeds. Made entirely from U.S. soybeans.
EAR SAVER, CIH 2200, 2400, 3200, 3400; NH 96C 96D, 98C, 98D, 996
Ear saver for Case-IH 2200, 2400, 2600, 3200, 3400; New Holland 96C, 96D, 98C, 98D, 996.
EAR SAVER, CIH 4400, 20"/22" OUTSIDE
Outside ear saver for Case-IH 4400 series with 20"/22" spacing.
EAR SAVER, CIH 4400, 20"/22", INSIDE
Inside ear saver for Case-IH 4400 series with 20"/22" spacing.
EAR SAVER, CIH 4400, 30" INSIDE
Inside ear saver for Case-IH 4400 series with 30" spacing.
EAR SAVER, CIH 4400, 30" OUTSIDE
Outside ear saver for Case-IH 4400 series with 30" spacing.
EAR SAVER, CIH 800, 900, 1000, 2600, GVL
Ear saver for Case-IH 800, 900, 1000 series and GVL poly cornheads.
Ear saver for GVL poly snouts.
Ear saver for John Deere 40 series with 30" spacing.
EAR SAVER, JD 600, 22", INSIDE
Inside ear saver for John Deere 600 series with 22" spacing.
EAR SAVER, JD 600, 22", OUTSIDE
Outside ear saver for John Deere 600 series with 22" spacing.
EAR SAVER, JD 600, 30", INSIDE
Inside ear saver for John Deere 600 series with 30" spacing.
EAR SAVER, JD 600, 30", OUTSIDE
Outside ear saver for John Deere 600 series with 30" spacing.
EAR SAVER, JD 90 SERIES, 30", 1988 & NEWER
Ear saver for John Deere 90 series 1998 & newer poly head with 30" spacing.
EAR SAVER, JD 90 SERIES, 30", INSIDE, 1997 & PRIOR
Inside ear saver for John Deere 90 series 1997 & prior poly head with 30" spacing.
EAR SAVER, JD 90 SERIES, 30", OUTSIDE, 1997 & PRIOR
Outside ear saver for John Deere 90 series 1997 & prior poly head with 30" spacing.
Inside ear saver for Caterpillar/Lexion cornheads.
Outside ear saver for Caterpillar/Lexion cornheads.
ELBOW KIT, JD 1790 ESET, PKG OF 4
Kit includes 4 elbows and 4 rubber seals. Fits all JD 1790 planters with 15" or 30" row spacing. On the original JD Meter the tube on the center four rows are turned toward the back to fit under the center fill hopper. The elbow kit is what replaces that bend on the eSet meter. Improves routing of supply tube to the ProFlo hopper on the center rows of this model planter.
ELBOW, 1/4" MUR-LOK X 1/4" MUR-LOK
1/4" Mur-Lok fitting to 1/4" Mur-Lok fitting; 90-degree elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
ELBOW, 3/8" MUR-LOK X 1/2" NPTF MALE
3/8" Mur-Lok fitting to 1/2" male NPTF; 90-degree swivel elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
ELBOW, 3/8" MUR-LOK X 1/4" MUR-LOK
3/8" Mur-Lok fitting to 1/4" Mur-Lok fitting; 90-degree elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
ELBOW, 3/8" MUR-LOK X 1/4" NPTF MALE
3/8" Mur-Lok fitting to 1/4" male NPTF; 90-degree elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
ELBOW, 3/8" MUR-LOK X 5/16" MUR-LOK
3/8" Mur-Lok fitting to 5/16" Mur-Lok fitting; 90-degree elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
Constructed of polypropylene with leak resistant dual EPDM o-rings.
ELBOW, 5/16" MUR-LOK X 1/4" NPTF MALE
5/16" Mur-Lok fitting to 1/4" male NPTF; 90-degree elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
ELBOW, 5/16" MUR-LOK X 5/16" STEM
5/16" Mur-Lok fitting to 5/16" stem; 90-degree elbow. Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
END SHIELD KIT, FLIP REEL, DOUBLE
End Shield Kit for both ends of the Filp Reel. Improves performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
END SHIELD KIT, FLIP REEL, SINGLE
End Shield Kit for both ends of the Filp Reel. Improves performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
Envita can be applied In-Furrow (0.80 fl. oz. per acre) or Foliar (0.80 fl. oz. per acre). One bladder will treat 40 acres. One case contains 4 bladders. This product is a biological. Any returns require pre-approval due to shelf life.
Envita can be applied In-Furrow (0.80 fl. oz. per acre) or Foliar (0.80 fl. oz. per acre). One bladder treats 40 acres. This product is a biological. Any returns require pre-approval due to shelf life.
Replacement extractor for eSet.
fCrumbler mulches and firms the seed trench without smearing or packing like a rubber press wheel. Properly spaced cleats, size material. Compatible with 2nd stage closer and Case-IH 2000 series closing wheel kit.
FEEDERHOUSE DRUM, JD 9400, 9410, 9450, 9500, 9510, 9550, 9650 STS, 9750 STS
Feederhouse Drum for John Deere 9400, 9410, 9450, 9500, 9510, 9550, 9650 STS and 9750 STS.
FEEDERHOUSE DRUM, JD 9560 STS, 9570 STS
Feederhouse Drum with 4-bolt bearing style drums for John Deere 9560 STS (s/n 720101 & up) and 9570 STS. Requires HRV800043 with a John Deere 9560 with serial number 710559 and prior. Requires HRV800442 bearing kit.
FEEDERHOUSE DRUM, JD 9600, 9610, 9650
Feederhouse Drum for John Deere 9600, 9610 and 9650.
FEEDERHOUSE DRUM, JD 9600, 9610, 9650 W/ CONTOUR MASTER
Feederhouse Drum for John Deere 9600, 9610 and 9650 with contour master.
FEEDERHOUSE DRUM, JD 9660 STS, 9670 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS
Feederhouse Drum with 4-bolt bearing style drums for John Deere 9660 STS (s/n 720301 & up); 9760 STS (s/n 720401 & up); 9860 STS (s/n 720501 & up); 9670 STS, 9770 STS, 9870 STS (prior to s/n 730100). Requires HRV800042 for John Deere 9660 STS (s/n 711301 & prior), 9760 STS (s/n 711197 & prior) and 9860 STS (s/n 710892 & prior). Requires HRV800442 bearing kit.
FEEDERHOUSE DRUM, JD 9670 STS, 9770 STS, 9870 STS, S650, S660, S670, S680, S690
Feederhouse Drum for John Deere 9670 STS, 9770 STS, 9870 STS serial number 730101 and up; S650, S660, S670, S680, S690 prior to serial number 775000.
FEEDERHOUSE DRUM, JD S650, S660, S670, S680, S690
Feederhouse Drum for John Deere S650, S660, S670, S680, S690 serial number 775001 and up.
FERTILIZER BOX TOPPER, JOHN DEERE
Plant longer, get done faster. Adds up to 400 lbs. per hopper. Easy installation - use original lid. Durable fiberglass construction with steel cross brace. Fits all John Deere models.
Plant longer, get done faster. Adds up to 400 lbs. per hopper. Easy installation - use original lid. Durable fiberglass construction with steel cross brace. Fits all Kinze models.
FITTING, 1/4" MUR-LOCK X 1/4" MALE NPTF
1/4" Mur-Lok fitting to threaded 1/4" male NPTF. Constructed of polypropylene with leak resistant dual EPDM O-rings.
FITTING, 1/4" MUR-LOCK X 3/8" MALE NPTF
1/4" Mur-Lok fitting to threaded 3/8" male NPTF. Constructed of polypropylene with leak resistant dual EPDM O-rings.
FITTING, 1/4" MUR-LOK X 3/8" STEM
1/4" Mur-Lok fitting to 3/8" stem. Constructed of polypropylene with leak resistant dual EPDM O-rings.
FITTING, 3/8" MUR-LOK X 1/2" STEM
3/8" Mur-Lok fitting to 1/2" stem. Constructed of polypropylene with leak resistant dual EPDM O-rings.
FITTING, 3/8" STEM X 1/2" BARB
3/8" stem to 1/2" barb fitting. Constructed of polypropylene with leak resistant dual EPDM o-rings.
FITTING, 3/8" STEM X 3/8" BARB
3/8" stem to 3/8" barb fitting. Constructed of polypropylene with leak resistant dual EPDM o-rings.
1-3/16" flange bushing.
FLAP KIT, JD 1790 15" & 20" ESET, PKG OF 4
Kit includes flaps for 4 rows. Use on 1790 20” row planters and where eSet will be installed on 15” row units. This flap has been designed to help prevent seed from flowing out of the hopper and into the CCS hose when the wing rows are up. We recommend placing these flaps in all meters on every row of the planter.
FLIP REEL KIT, AGCO 400-8000, CIH 1010, 1020, 3020, NH 971, 973, 73C, 740CF, SINGLE
Flip Reel Kit available for AGCO 400, 500, 800 and 8000 series. Available for Case-IH 1010, 1020 and 3020. Also available for New Holland 971, 973, 73C and 740CF, 22' and shorter. HCC031600, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, AGCO 400-8000, NH 971, 973, 73C, DOUBLE
Flip Reel Kit available for AGCO 400, 500, 800 and 8000 series. Also available for New Holland 971, 973 and73C, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, AGCO 5000, 8000, DRAPER, DOUBLE
Flip Reel Kit available for AGCO 5100 and 5200 series draper, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, AGCO 5100, 5200 DRAPER, SINGLE
Flip Reel Kit available for AGCO 5100 and 5200 series draper, 22' and shorter. HCC031600, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, AGCO/MF 8200, 9250, DOUBLE
Flip Reel Kit available for AGCO 8200 and 9250 series, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, AGCO/MF 8200, 9250, SINGLE
Flip Reel Kit available for AGCO 8200 and 9250 series, 22' and shorter. HCC031600, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, CIH 1010, 1020, 3020, NH 740CF, DOUBLE
Flip Reel Kit available for Case-IH 1010, 1020 and 3020. Also available for New Holland 740CF, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, CIH 2010, 2020, NH 72C, 74C, DOUBLE
Flip Reel Kit available for Case-IH 2010 and 2020. Also available for New Holland 72C and 74C, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, CIH 2010, 2020, NH 72C, 74C, SINGLE
Flip Reel Kit available for Case-IH 2010 and 2020. Also available for New Holland 72C and 74C, 22' and shorter. HCC031600, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, HONEY BEE, BRACKET MOUNT, DOUBLE
Flip Reel Kit available for Honey Bee bracket mount, double eccentric. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, HONEY BEE, CLAMP MOUNT, DOUBLE
Flip Reel Kit available for Honey Bee clamp mount, double eccentric. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, JD 600 FLEX AUGER, JD 900 DRAPER, DOUBLE
Flip Reel Kit available for John Deere 600 flex series and John Deere 900 draper, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, JD 600 FLEX AUGER, SINGLE
Flip Reel Kit available for John Deere 600 flex series, 22' and shorter. HCC031600, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, JD 630FD, 635FD, 730FD, 735FD
Flip Reel Kit available forJohn Deere 630FD, 635FD, 730FD, 735FD, 25', 30' and 35'. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, JD 640FD, 645FD, 740FD, 745FD
Flip Reel Kit available for John Deere 640FD, 645FD, 740FD, 745FD. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, JD 900 FLEX, DOUBLE
Flip Reel Kit available for John Deere 900 series, 25' and longer. HCC031591, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
FLIP REEL KIT, JD 900 FLEX, SINGLE
Flip Reel Kit available for John Deere 900 series, 22' and shorter. HCC031600, End Shield Kit, is recommended to help improve the performance of Flip Reel in some crop conditions by keeping the crop inside the reel.
Copperhead Furrow Cruiser closing wheel for John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
FURROW CRUISER, REGULAR DEPTH, INSERTS ONLY
Copperhead Furrow Cruiser insert for factory 1" x 12" poly close wheel assemblies.
Furrow shoe with liquid tube attched for left side opener.
Furrow shoe with liquid tube attched for right side opener.
GATEWAY RISER KIT, HILLSIDE DIVIDER
Hillside divider kit for HCC Gateway. Includes rivets and clips. You will reuse your original risers.
GAUGE WHEEL ARM, JD 7200, 1700 MAXEMERGE 2
Fits John Deere 7200, 7300 and early 1760, 1780 MaxEmerge 2 row units. Gauge wheel arm mounts to planter on a 1" diameter pin. Gauge wheel mounts to arm with set screw. Includes 1 arm, threaded bushing and mounting hardware. Two required per row.
GAUGE WHEEL ARM, JD XP, XP PRO, ME5, EE
Gauge wheel arm mounts to planter with M16x100mm long bolt. Gauge wheel mounts to arm with bolt. Includes 1 arm, threaded bushing and mounting hardware. Will fit John Deere MaxEmerge®XP, XP Pro, MaxEmerge 5, ExactEmerge; 1530, 1535 with XP row units. Two required per row.
GAUGE WHEEL ARM, KINZE 2000 SERIES, 1993-1999
Gauge wheel mounts to arm with bolt. Gauge wheel arm mounts to planter on a 1" diameter pin. Includes 1 arm and threaded bushing. Fits Kinze 2000 series row units, 1993-1999.
GAUGE WHEEL ARM, KINZE 3000, 4000 SERIES, LH
Left hand gauge wheel arm for Kinze 3000 and 4000 series planters.
GAUGE WHEEL ARM, KINZE 3000, 4000 SERIES, RH
Right hand gauge wheel arm for Kinze 3000 and 4000 series planters.
Gauge wheel cover for John Deere, Kinze and White planters. Made of heavy gauge steel and includes all mounting hardware.
GAUGE WHEEL, 4.5 X 16 STANDARD, KINZE, 5/8"
Gauge Wheel Assembly with 4.5" x 16" standard profile tire mounted on black metal halves with white nylon hub cap with 5/8" bearing. Will fit Kinze 3000 and 4000 series planters.
GAUGE WHEEL, 4.5 X 16, GREAT PLAINS, JD, KINZE, WHITE, 5/8"
Gauge Wheel Assembly with 4.5" x 16" staGauge wheel assembly mounted with one metal rim and one nylon rim. Includes 5203KYY2 (5/8") bearing. Will fit Great Plains UP Series; John Deere MaxEmerge XP, XP Pro. MaxEmerge5, ExactEmerge planters; John Deere drills 1530, 1535 with MaxEmerge XP row units; Kinze 2000 series (1993 & newer); White 8000 series.
GAUGE WHEEL, 4.5 X 16, JD DRILL, 5/8"
Gauge Wheel Assembly with 4.5" x 16" standard profile tire mounted on yellow metal halves with 5/8 bearing. Will fit John Deere 750, 1850 drills.
GAUGE WHEEL, 4.5 X 16, JD, ROLL PIN
Gauge Wheel Assembly with 4.5" x 16" standard profile tire mounted on yellow metal halves with water pump style bearing (roll pin). Will fit all John Deere MaxEmerge and MaxEmerge 2 prior to 1992.
GRAIN TANK AUGER FLOOR LINER, 9660 STS, 9670 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS, STAINLESS
Stainless Steel Grain Tank Auger Floor Liner for John Deere 9660 STS, 9670 STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS front and rear troughs. Will work with high rate cross auger.
GRAIN TANK AUGER FLOOR LINER, CIH 1400 SERIES, POLY
Poly Grain Tank Auger Floor Liner for all Case IH 1400 series. Covers both augers.
Stainless Steel Grain Tank Auger Floor Liner for Case-IH 1440, 1460, 1480, 1640, 1644, 1660, 1666, 1680, 1688, 2144, 2166, 2188, 2344, 2366 to s/n 255698, 2377, 2388 to s/n 270499, 2577 and 2588 front and rear troughs.
GRAIN TANK AUGER FLOOR LINER, CIH 1600 SERIES, POLY
Poly Grain Tank Auger Floor Liner for all Case IH 1600 series except 1620. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, CIH 2100 SERIES, POLY
Poly Grain Tank Auger Floor Liner for all Case IH 2100 series. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, CIH 2300 SERIES, 2588, POLY
Poly Grain Tank Auger Floor Liner for all Case IH 2300 series and Case-IH 2588 series. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, CIH 5088, 5130, 6088, 6130, 7088, 7130, POLY
Poly Grain Tank Auger Floor Liner for Case IH 5088, 5130, 6088, 6130, 7088 and 7130. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, CIH 5088, 5130, 6088, 6130, 7088, 7130, STAINLESS
Stainless Steel Grain Tank Auger Floor Liner for Case-IH 5088, 5130, 6088, 6130, 7088 and 7130 front and rear troughs.
Stainless Steel Grain Tank Auger Floor Liner for Case-IH 7010, 7120, 7230, 7240, 8010, 8120, 8230, 8240, 9010, 9120, 9230 and 9240 front and rear troughs.
GRAIN TANK AUGER FLOOR LINER, CIH 7010, 7120, 8010, 8120, 9120, POLY
Poly Grain Tank Auger Floor Liner for Case IH 7010, 7120, 8010, 8120 and 9120. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, CIH 7230, 8230, 9230, POLY
Poly Grain Tank Auger Floor Liner for Case IH 7230, 8230 and 9230. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, GLEANER, POLY
Poly Grain Tank Auger Floor Liner for all Gleaner model combines.
GRAIN TANK AUGER FLOOR LINER, JD 9400, 9410, 9500, 9510, POLY
Poly Grain Tank Auger Floor Liner for John Deere 9400, 9410, 9500 and 9510. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, JD 9400, 9410, 9500, 9510, STAINLESS
Stainless Steel Grain Tank Auger Floor Liner for John Deere 9400, 9410, 9500 and 9510 front and rear troughs.
GRAIN TANK AUGER FLOOR LINER, JD 9450, 9550, 9560, 9600, 9610, 9650, 9660, POLY
Poly Grain Tank Auger Floor Liner for John Deere 9450, 9550, 9560, 9600, 9610, 9650 and 9660. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, JD 9560 STS, 9650 STS, 9660 STS, 9750 STS, 9760 STS, STAINLESS
Stainless Steel Grain Tank Auger Floor Liner for John Deere 9560 STS, 9650 STS, 9660 STS, 9750 STS and 9760 STS front and rear troughs. Will work with 7-1/2" diameter standard rate cross auger.
GRAIN TANK AUGER FLOOR LINER, JD 9560STS, 9570STS, 9650STS, 9750STS, POLY
Poly Grain Tank Auger Floor Liner for John Deere 9560STS, 9570STS, 9650STS and 9750STS. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, JD 9600, 9610, STAINLESS
Stainless Steel Grain Tank Auger Floor Liner for John Deere 9600 and 9610 front and rear troughs.
Poly Grain Tank Auger Floor Liner for John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S550, S660, S670, S680 and S690. Covers both augers.
GRAIN TANK AUGER FLOOR LINER, NH CR920, CR940, CR960, CR970, CR980, CR9040, CR9070, POLY
Poly Grain Tank Auger Floor Liner for New Holland CR920, CR940, CR960, CR970, CR980, CR9040 and CR9070.
GRAIN TANK AUGER FLOOR LINER, NH TR, POLY
Poly Grain Tank Auger Floor Liner for New Holland all single auger TR models.
GRAIN TANK AUGER FLOOR LINER, UNIVERSAL, POLY
Poly Grain Tank Auger Floor Liner for all Case IH 1400 series. Covers both augers.
Mount this holder wherever you need to have easy access to your grease gun.
Growthful, in-furrow, is applied at 16 ounces per acre. Contains one 5 gallon container.
Growthful, post-emerge, is applied at 12.8 ounces per acre. Contains one 5 gallon container.
Growthful, pre-emerge, is applied at 256 ounces per acre. Contains one 5 gallon container
GUIDE KIT, CIH, LEXION, NH, SINGLE
Guide with hardware included. Case-IH 2020 (before serial #CBJ020701); Lexion V1050, V1200, F535, F540, G535, G540, V525, V535, V540, V750, V900, F25, F30, F525, F750, F900, G30, G525; New Holland 74C (before serial #PNL01781).
GUIDE KIT, CIH, MACDON, NH, SINGLE
Guide with hardware included. Case-IH 1010, 1020, 2020 (serial #CBJ020701 & later), 2042, 2052, 2062, 2142, 2152, 2162, 3016, 3020, 3152 and 3162; 740CF, 74C (serial #PNL01781 & later), 82C, 83C, 84C and 86C; MacDon 872, 873, CA20 and CA25.
GUIDE KIT, JD 600FD, 600D, SINGLE
Guide with hardware included. John Deere 600FD and 600D.
HARDWARE KIT, PP TREADER WHEEL, 4-BOLT MARTIN, PKG OF 2
Harness to connect camera to an AG Lead In Command 4-pin display. Can use up to 4 cameras.
HARNESS, AG LEADER INTEGRA, VERSA
Harness to connect camera to an AG Leader Integra and Versa display. Can use up to 4 cameras.
HARNESS, CIH PRO 700, NH INTELLVIEW IV
Harness to connect camera to a Case-IH 700 and New Holland IntellvView III and IV. Can use up to 3 cameras.
HARNESS, JD 2630, COMBINE, VISIONWORKS
Harness to connect camera to a John Deere Greenstar 2630 dsiplay in a combine. Can use up to 3 cameras.
HARNESS, JD 2630, R-SERIES SPRAYER, VISIONWORKS
Harness to connect camera to a John Deere touch screen CommandCenter display on a R-series sprayer. Can use up to 2 cameras.
HARNESS, JD 2630, TRACTOR, VISIONWORKS
Harness to connect camera to a John Deere Greenstar 2630 dsiplay in a tractor. Can use up to 3 cameras.
HARNESS, JD COMMAND CENTER, 6R-SERIES TRACTOR, VISIONWORKS
Harness to connect camera to a John Deere touch screen CommandCenter display on a 6R-series tractor.
HARNESS, JD GREENSTAR 4640, COMBINE
Harness to connect camera to a John Deere 4640 display on a combine. Can use up to 4 cameras.
HARNESS, JD GREENSTAR 4640, TRACTOR
Harness to connect camera to a John Deere 4640 display on a tractor. Can use up to 4 cameras.
Harness to connect camera to Raven Viper 4 display. Can use up to 4 cameras.
HCC HD LEVEL II TINE, NO WING, W/SCREW, SINGLE
Heavy duty reel tine, no bat for Level II reel.
HCC LEVEL II TINE, DOUBLE WING, W/SCREW, SINGLE
Reel tine, for Level II reel - Full bat, Quantity of one with screws.
HCC LEVEL II TINE, LH WING, W/SCREW, SINGLE
Reel tine, for a Level II reel - Left hand bat, Quantity of one with screw.
HCC LEVEL II TINE, NO WING, W/SCREW, SINGLE
Reel tine, for a Level II reel - No bat, Quantity of one with screw.
HCC LEVEL II TINE, RH WING, W/SCREW, SINGLE
Reel tine, for a Level II reel - Right hand bat, Quantity of one with screw.
HCC LOVE TINE, W/SCREW, SINGLE
Reel tine, for a Love reel, quantity of one, with screw.
HCC ML TINE, DOUBLE WING, W/SCREW, SINGLE
Reel tine, for a ML reel - Full bat, Quantity of one with screws.
HCC ML TINE, LH WING, W/SCREW, SINGLE
Reel tine, for a ML reel - Left hand bat, Quantity of one with screw.
HCC ML TINE, NO WING, W/SCREW, SINGLE
Reel tine, for a ML reel - No bat, Quantity of one with screw.
HCC ML TINE, RH WING, W/SCREW, SINGLE
Reel tine, for a ML reel - Right hand bat, Quantity of one with screw.
HCC PADDLE TINE, LEVEL II REEL, SINGLE
Paddle Tine for Level II 6" tine spacing.
HCC PADDLE TINE, ML REEL, SINGLE
Paddle Tine for ML 4.5" tine spacing.
HCC PADDLE TINE, POLYTINE REEL, SINGLE
Paddle Tine for 4.5" tine spacing with teardrop bat tubes.
HCC PADDLE TINE, WOOD BAT REEL, SINGLE
Paddle Tine for 4.5" tine spacing with a wood bat reel.
Reel tine, for a Polytine reel, quatity of one, with screw.
Reel tine, for a Wood Bat reel, Quantity of one. Clips sold separately.
HD SPINDLE & HUB ASSEMBLY, SMART-TILL
Head pin for Case-IH 2142, 2152, 2162; MacDon D50, D60, D65, FD70, FD75; New Holland 84C.
HEDGE TRIMMER, KM150-S, STANDARD, 5'
Standard design hedge trimmer for 59" working width.
HEDGE TRIMMER, KM180-S, STANDARD, 6'
Standard design hedge trimmer for 71" working width.
HEDGE TRIMMER, KM210-S, STANDARD, 7'
Standard design hedge trimmer for 83" working width.
HEDGE TRIMMER, KM240-S, STANDARD, 8'
Standard design hedge trimmer for 95" working width.
HEDGE TRIMMER, KM270-S, STANDARD, 9'
Standard design hedge trimmer for 106" working width
HEDGE TRIMMER, KM300-S, STANDARD, 10'
Standard design hedge trimmer for 118" working width.
Bolt, 6mm x 16mm, for section.
Bolt, 6mm x 18mm, for knifehead and splice kit.
Bolt, 6mm x 20mm, for knifehead.
Bolt, 6mm x 25mm, for knifehead.
Bolt, 6mm x 28mm, for knifehead.
Adjustable hold down for Case-IH 1020, 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
Adjustable hold down for Case-IH 1020, 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
HOLD DOWN, DRIVE END, JD 200, 900
Cast hold down for John Deere 200 and 900 series. One used on drive end.
High arch hold down clip for John Deere 600F, 600FD, 700FD, 600R, 925D, 930D and 936D.
Cast hold down for John Deere 200 and 900 series.
Low arch hold down clip for John Deere 600F, 600FD, 700FD, 600R, 925D, 930D and 936D.
Steel hold down for AGCO Series 3, 300, 400, 500, 800, 8000 and 9250; John Deere 200, 900 series.
Hopper Vent for standard eSet.
Hose Clamp, for seed tube mounted firmers.
Case-IH and Great Plains, angled top, belt meter housing, left hand.
Case-IH and Great Plains, angled top, belt meter housing, right hand.
Case-IH and Great Plains, flat top, belt meter housing, left hand.
John Deere belt meter housing, left hand.
John Deere belt meter housing, right hand.
HUB & HDW, 4-BOLT CLOSING WHEEL, SINGLE BEARING
Cast 4-Bolt Hub for Closing Wheels w/ Single Row Bearing. For 5/8" bolt-on style closing wheel frames.
HUB WITH HARDWARE, 4-BOLT, WA1345, ACCR1345
4-bolt hub for Martin WA1345 and ACCR1345 row cleaners.
HUB, 3-BOLT CLOSING WHEEL, DOUBLE BEARING
Replacement aluminum 3-bolt closing wheel hub with 2 sealed bearings.
HUB, 3-BOLT CLOSING WHEEL, SINGLE BEARING
Aluminum Closing Wheel Hub with 2 Single Row Bearings (Replacement Part Only). For bolt-on style wheels. Accepts 5/8" bolt.
High speed compact disc hub for Degelman Pro-Till 20, 26, 33, 40; Kinze Mach Till 201, 261, 331, 401.
High speed compact disc hub for Horsch Joker.
High speed compact disc hub for John Deere 2608H and Norwood Kwik-Till.
High speed compact disc hub for John Deere 2608H and Norwood Kwik-Till.
Cast hub for UMO-100 fertilizer opener.
HUB/AXLE, 3-BOLT, C125 ROW CLEANER
D-Series hub/axle combination for C125 row cleaner. (Replacement Part Only).
HUB/AXLE, 3-BOLT, WA1317, WA1330
D-Series hub/axle combination for WA1317 and WA1330 row cleaners. (Replacement Part Only).
HUB/AXLE, 4-BOLT, C125, WA1360, ACCR1360
D-Series hub/axle combination for all Martin 4-bolt row cleaners; including C125, WA1360, WA1332, WA1334, WA1532.
Down Pressure System for Case-IH 500T and 500DS. Will fit Case-IH 500T 25', 30' and 40'; 500DS 30' and 40'.
INSTRUCTIONS, ORBIT TRAC II KIT
IONfx, seed coating, is applied at 2oz/cwt. One case contains 4 x 100oz jugs. This product is a biological. Any returns require pre-approval due to shelf life.
IONfx, seed coating, is applied at 2oz/cwt. Contains 1 x 100oz jugs. This product is a biological. Any returns require pre-approval due to shelf life.
IONfx can be applied In-Furrow (16oz/acre) or Foliar (16oz/acre). One case contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
IONfx can be applied In-Furrow (16oz/acre) or Foliar (16oz/acre). Contains 1 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
KEETON STIFFENING BRACKET, PKG OF 4
KEETON, CRUSTBUSTER W/ALL-PLANT
Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper support rod. Fits Crustbuster drill models 3400 series & 4000 series, fits all All-Plant or Min-Till openers. Includes standard liquid tail and all necessary hardware.
KEETON, CRUSTBUSTER W/O ALL-PLANT
Keeton Seed Firmer, Standard Liquid Tail. Mounts to scraper bracket. Fits Crustbuster drill models 3700, 3800 & 3400 without parallel arms (Will not fit 3400 All-Plant or 3400 Min-Till openers). Includes standard liquid tail and all necessary hardware.
Keeton Seed Firmer, Narrow Liquid Tail. All 00HD series row units: 2S-2600HD, 3S-3000HD, 3S-4000HD and 3S-4000HDA. Includes narrow liquid tail and all necessary hardware.
KEETON, GP 25/10 PLANTER SERIES
Keeton Seed Firmer, Narrow Liquid Tail. All 25 series planter style row units and 10HD series row units: YP1225, YP1625, YP2425, 1525P, 1510HDP, 1510HDF, 2010HDP & F, 2020HDP & F, 2025P & F and 2520P. Includes narrow liquid tail and all necessary hardware.
Keeton Seed Firmer, Standard Liquid Tail. Mounts over fertilizer opening. Fits All Krause drill models. Includes standard liquid tail and all necessary hardware.
Keeton Seed Firmer, Standard Liquid Tail. Mounts onto the seed disk scraper. Fits Most Marliss drill models (Will not fit 2038). Includes standard liquid tail and all necessary hardware.
KEETON, QUICK ATTACH, JD EE, LOW STICK TAIL
Keeton Seed Firmer, Low Stick Tail with single liquid tube, Quick Attach. Will move the closing system 5.4 inches rearward. Fits John Deere ExactEmerge row units.
KEETON, QUICK ATTACH, JD EE, LP TAIL
Keeton Seed Firmer, Low Profile Tail with single liquid tube, Quick Attach. Will move the closing system 5.4 inches rearward. Fits John Deere ExactEmerge row units.
KEETON, QUICK ATTACH, JD EE, STANDARD TAIL
Keeton Seed Firmer, Standard Tail with single liquid tube, Quick Attach. Will move the closing system 5.4 inches rearward. Fits John Deere ExactEmerge row units.
KEETON, QUICK ATTACH, JD, LOW STICK TAIL
Keeton Seed Firmer, Low Stick Tail, Quick Attach. Mounts to seed disc opener shafts and lower seed tube pin. Fits John Deere MaxEmerge 2, MaxEmerge Plus, MaxEmerge Pro, MaxEmerge XP, MaxEmerge XP Pro and MaxEmerge 5 row units.
KEETON, QUICK ATTACH, KINZE 3000, LOW STICK TAIL
Keeton Quick Attach wrap around bracket and low stick tail with single liquid tube. Mounts to seed disc opener shafts and lower seed tube pin. For use with Quick Attach firmer tails only. Fits Kinze 3000 series planters with SpeedTube, WaveVision, Bullseye or "Small" seed tubes. Does NOT fit Kinze 3000 series planters with "Large" seed tubes such as EdgeVac and 2013 & newer mechanical meter planters.
KEETON, QUICK ATTACH, KZ 3000, 4700, 4900, LOW STICK TAIL
Keeton Quick Attach bracket and low stick tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000 and 4900 series planters with WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.
KEETON, QUICK ATTACH, KZ 3000, 4700, 4900, LP TAIL
Keeton Quick Attach bracket and low profile tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000 and 4900 series planters WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.
KEETON, QUICK ATTACH, KZ 3000, 4700, 4900, STANDARD TAIL
Keeton Quick Attach bracket and standard tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000 and 4900 series planters WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.
KEETON, QUICK ATTACH, WHITE 8000, STANDARD TAIL
Keeton Seed Firmer, Standard Tail with single liquid tube, Quick Attach. Fits White 800 series row units. Mounts to seed disc opener shafts and lower seed tube pin.
Keeton Seed Firmer, Modified Dry Tail. Mounts to back of disk opener casting. Fits Most Sunflower drills. Includes modified dry tail and all necessary hardware.
Keeton Seed Firmer, Standard Liquid Tail. Mounts onto the seed disk scraper. Fits All Tye drills. Includes standard liquid tail and all necessary hardware.
10 each of bolts and nuts for John Deere knifeheads on 4" cutting system. For OEM knifeheads on: John Deere 600 auger, 600 and 700 series flex draper and 900 series draper platforms. Use with Radura knifeheads: RSP002559, RSP080573, HRV450125.
KNIFE ASSEMBLY & KNFHD, CIH 1010/1020, 17.5', 9SPI
OEM 17.5-foot sectional knife assembly with 9 serration per inch sections and RSP051520 knifehead for Case-IH 1010 and 1020 headers with 3-inch cutting system. Hardware is included.
KNIFE ASSEMBLY & KNFHD, CIH 1010/1020, 20', 9SPI
OEM 20-foot sectional knife assembly with 9 serration per inch sections and RSP051520 knifehead for Case-IH 1010 and 1020 headers with 3-inch cutting system. Hardware is included.
KNIFE ASSEMBLY & KNFHD, CIH 1010/1020, 22.5', 9SPI
OEM 22.5-foot sectional knife assembly with 9 serration per inch sections and RSP051520 knifehead for Case-IH 1010 and 1020 headers with 3-inch cutting system. Hardware is included.
KNIFE ASSEMBLY & KNFHD, CIH 1010/1020, 25', 9SPI
OEM 25-foot sectional knife assembly with 9 serration per inch sections and RSP051520 knifehead for Case-IH 1010 and 1020 headers with 3-inch cutting system. Hardware is included.
KNIFE ASSEMBLY & KNFHD, CIH 1010/1020, 30', 9SPI
OEM 30-foot sectional knife assembly with 9 serration per inch sections and RSP051520 knifehead for Case-IH 1010 and 1020 headers with 3-inch cutting system. Hardware is included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 12' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 16' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 18' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 20' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 22' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifehead NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 24' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 40' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 25' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 30' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 35' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 36' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 45' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, DD, REPLACEMENT
SCH Replacement 14' Double Drive Knife Assembly for SCH cutting system. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. NOTE: please include make and model of platform when ordering. Knifeheads NOT included.
KNIFE ASSEMBLY, JD 630FD, 730FD, DD, LH, 14SPI
OEM 15-foot LEFT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 630FD, 730FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, JD 630FD, 730FD, DD, LH, 7SPI
OEM 15-foot LEFT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 630FD, 730FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, JD 630FD, 730FD, DD, RH, 14SPI
OEM 15-foot RIGHT HAND sectional knife assembly with fine tooth sections (14-SPI) for John Deere 630FD, 730FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT includeD. Fine tooth sections are recommended for wheat and grasses.
KNIFE ASSEMBLY, JD 630FD, 730FD, DD, RH, 7SPI
OEM 15-foot RIGHT HAND sectional knife assembly with coarse tooth sections (7SPI) for John Deere 630FD, 730FD flex draper double drive platform with 4" cutting system. Hardware and knife connector kits are included. Knifehead is NOT included. Coarse tooth sections are recommended for soybeans and alfalfa.
KNIFE ASSEMBLY, JD 936D, 14SPI
OEM 36-foot sectional knife assembly with fine tooth sections for John Deere 936 draper platform with 4" cutting system. Hardware and knife connector kits are included. Does NOT include the RSP080573 knifehead. Fine tooth sections are recommended for wheat and grasses.
SCH Replacement 8' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 7' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 9' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 10' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 11' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 12' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 13' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 15' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 16' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 17' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 18' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 20' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 22' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 24' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 25' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 27' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 30' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 36' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 7' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 8' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 10' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 11' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 12' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 13' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 15' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 16' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 17' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 18' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 20' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 22' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 24' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 25' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 27' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 30' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 35' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 35' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 36' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 9' Knife Assembly for SCH cutting system starting with a FULL section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 12' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
SCH Replacement 35' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
KNIFE ASSEMBLY, REPLACEMENT, MACDON
SCH Replacement 40' Knife Assembly for SCH cutting system starting with a HALF section. Please specify coarse (7 SPI) or fine (11 SPI) knife sections when ordering. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Knifehead NOT included.
Left hand and right hand knifehead for John Deere 600FD and 700FD flex draper.
Knifehead for John Deere 600 series rigid platforms.
Left hand knifehead for New Holland 499 and 1499. Bushing included.
Right hand knifehead for New Holland 499 and 1499. Bushing included.
Replacement square handle latch assembly for Montezuma toolbox.
LINER ASSEMBLY, ESET STANDARD, ME5
Replacement liner assembly for eSet Standard.
Replacement liner assembly for Pro-Series eSet.
LOCKNUT, SERRATED FLANGE, 5/8-18 UNF
M3 KIT, 12-ROW DRILL, RIGID, 10-20'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 12-ROW PLANTER, FF, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 12-ROW PLANTER, FF, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 12-ROW PLANTER, RF, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 12-ROW PLANTER, RF, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 12-ROW PLANTER, RIGID, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 12-ROW PLANTER, RIGID, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 16-ROW DRILL, FOLDING, 20-25'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 16-ROW DRILL, FOLDING, 30'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 16-ROW PLANTER, FF, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 16-ROW PLANTER, FF, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 16-ROW PLANTER, RF, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 16-ROW PLANTER, RF, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 16-ROW PLANTER, RIGID, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 16-ROW PLANTER, RIGID, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 4-ROW DRILL, FOLDING, 20-25'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 4-ROW DRILL, FOLDING, 30'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 4-ROW DRILL, RIGID, 10-20'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 4-ROW DRILL, TANDEM, 10-15'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 4-ROW PLANTER, RIGID, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 4-ROW PLANTER, RIGID, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 6-ROW DRILL, 3-FOLD, 30'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 6-ROW DRILL, RIGID, 10-20'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 6-ROW PLANTER, RIGID, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 6-ROW PLANTER, RIGID, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 8-ROW DRILL, RIGID, 10-20'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 8-ROW DRILL, TANDEM, 10-15'
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, seed tube adapters and instruction manual.
M3 KIT, 8-ROW PLANTER, FF, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 8-ROW PLANTER, FF, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 8-ROW PLANTER, RF, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 8-ROW PLANTER, RF, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 8-ROW PLANTER, RIGID, JD 7000
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 KIT, 8-ROW PLANTER, RIGID, JD 7200, 1700
All M3 Kits are supplied with connections for a speed sensor and limit switch/hopper switch on the planter harness. M3 Kits include M3 monitor console, power cable, cab harness, planter harness, DICKEY-john high-rate seed sensors, new seed tubes and instruction manual.
M3 MONITOR KIT WITH CT CAB CABLE
M3 MONITOR KIT WITH DJ CAB CABLE
MACHINED WASHER, BALL JOINT KNFHD
Machined washer for the SCH ball joint knifehead.
MARKER RODS, CROP DIVIDER, PAIR
Pair of marker rods for crop dividers.
MagnoJet, TKC 130 Degree 01 Yellow, Ceramic Spray Nozzle, Deflector (Flood). Preferably sold in package quantity of 10.
MagnoJet, TKC 130 Degree 02 Red, Ceramic Spray Nozzle, Deflector (Flood). Preferably sold in package quantity of 10.
MagnoJet, TKC 130 Degree 02.5 Brown, Ceramic Spray Nozzle, Deflector (Flood). Preferably sold in package quantity of 10.
MagnoJet, TKC 130 Degree 03 Gray, Ceramic Spray Nozzle, Deflector (Flood). Preferably sold in package quantity of 10.
MagnoJet, TKC 130 Degree 05 Lgt Blue, Ceramic Spray Nozzle, Deflector (Flood). Preferably sold in package quantity of 10.
MDC 13007.5 LGT GREEN, DEFLECTOR
MagnoJet, TKC 130 Degree 07.5 Lgt Green, Ceramic Spray Nozzle, Deflector (Flood). Preferably sold in package quantity of 10.
Furrow control strap reinforcement bracket.
Steel meter fixture holds the meter and nuts in place to ensure easier meter repair for do-it-yourselfers. Simply place your meter in the fixture and you will instantly see how easy it is to disassemble and reassemble your meters.
METER RE-POWER KIT, JD 7000, KINZE
Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover, SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.
METER RE-POWER KIT, JD 7200, 1700
Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover, SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.
The Mini Combine is a portable tool comprised of a picker/threshing drum and an aerator/blower for taking taking samples of wheat, barley, canoloa, sorghum, oats, soybeans, peas, field beans and flax.
Replacement mini-hopper for eSet Pro-Series.
MOJO WIRE KIT, CIH P-500; NH 2080, 2085
Fits all 2-piece drill Keetons including Great Plains narrow Keetons; Case-IH Precision 500; New Holland P2080, P2085 disk drills with full length Keeton tail to add more down pressure. Supplies up to 3 times more pressure than the standard Keeton. Will NOT fit the older 1-piece drill Keetons. Will NOT fit the Flo-Rite seed firmer.
Fits Quick Attach Keeton with standard tail, dry or liquid to add more down pressure. Supplies up to 3 times more pressure than the standard Keeton. Mojo Wire is NOT recommended for the Keeton Low Profile (LP) tail, as it will wear them out extremely fast. Will NOT fit the Flo-Rite seed firmer.
MOUNT, UMO; CIH, GREAT PLAINS, HI, JD, KINZE, WHITE
Unit mounted bracket for Martin UMO-100 and UMO-150 fertilizer opener. Will fit Case-IH with heavy duty adapter bracket; Great Plains; Harvest International; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4000, 5000 series; White 6000, 8000, 9000 series.
MOUNT, WA1345, WA1360, CIH 2000, JD 7200, 1700, W/DUAL UMO
Will fit Case-IH 1200 series and 2150, John Deere 7200, 7300, 1700 series without a no-till coulter to mount the WA1360 floating row cleaner assembly and dual UMO-100 fertilizer opener. Requires 30" of clearance from the face plate of the planter row unit forward. NOTE: Adapter bracket, Case-IH #48054385, required for Case-IH 1200 and 2150.
MOUNT, WA1345, WA1360, HORSCH, W/O NTC
Will fit John Deere 7000, 7100; Kinze 2000, 3000 series without a no-till coulter to mount the WA1345 and WA1360 floating row cleaner assembly. Will fit White EARLY 6000 series. Requires 19" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
MOUNT, WA1345, WA1360, JD, KINZE, HARVEST INTERNATIONAL, WHITE, W/O NTC
Will fit John Deere 7000, 7100, 7200, 7300, 1700; Kinze 2000, 3000, 4900 series; Harvest International; White 6000, 8000, 9000 series without a no-till coulter to mount the WA1345, WA1360 floating row cleaner assembly.
MOUNT, WA1345, WA1360, JD, KINZE, HARVEST INTERNATIONAL, WHITE, W/O NTC
Will fit John Deere 7000, 7100, 7200, 7300, 1700; Kinze 2000, 3000, 4900 series; Harvest International; White 6000, 8000, 9000 series without a no-till coulter to mount the WA1345, WA1360 floating row cleaner assembly. Requires 19" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
Dome Radura disc mower blade for John Deere Sold in boxes of 25.
Domed mower blade for PZ Zweegers. Sold in boxes of 25.
Domed mower blade for New Holland. Sold in boxes of 25.
Sold in boxes of 25.
Flat angle Radura disc mower blade for Deutz-Fahr. Sold in boxes of 25.
Flat angle Radura disc mower blade for Claas and Deutz-Fahr. Sold in boxes of 25.
Sold in boxes of 25.
Sold in boxes of 25.
Flat angle Radura disc mower blade for Claas, Deutz-Fahr, Fella and Krone. Sold in boxes of 25.
Flat mower blade for PZ Zweegers. Sold in boxes of 25.
Sold in boxes of 25.
Left hand 11 degree Radura disc mower blade for Vicon. Sold in boxes of 25.
Left hand 10 degree Radura disc mower blade for Krone. Sold in boxes of 25.
Sold in boxes of 25.
Sold in boxes of 25.
Left hand 10 degree Radura disc mower blade for Fella. Sold in boxes of 25.
Left hand 10 degree Radura disc mower blade for Claas. Sold in boxes of 25.
Left Hand 14 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Left Hand 18 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Sold in boxes of 25.
Sold in boxes of 25.
Left hand 11 degree Radura disc mower blade for Vermeer. Sold in boxes of 25.
Left hand 15 degree mower blade for Deutz-Fahr. Sold in boxes of 25.
Sold in boxes of 25.
Sold in boxes of 25.
Left hand 11 degree Radura disc mower blade for Kuhn. Sold in boxes of 25.
Left hand 11 degree mower blade for MacDon. Sold in boxes of 25.
Left hand 11 degree Radura disc mower blade for Hesston. Sold in boxes of 25.
Left hand 11 degree bottom bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Left hand 11 degree top bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Left hand 18 degree bottom bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Left hand 18 degree top bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Left Hand 14 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Left Hand 7 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Left Hand 7 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Right hand 11 degree Radura disc mower blade for Vicon. Sold in boxes of 25.
Right hand 10 degree Radura disc mower blade for Krone. Sold in boxes of 25.
Right hand 15 degree mower blade for Deutz-Fahr. Sold in boxes of 25.
Sold in boxes of 25.
Sold in boxes of 25.
Right hand 10 degree Radura disc mower blade for Fella. Sold in boxes of 25.
Right hand 10 degree Radura disc mower blade for Claas. Sold in boxes of 25.
Right Hand 14 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Right Hand 18 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Sold in boxes of 25.
Right hand 11 degree Radura disc mower blade for Vermeer. Sold in boxes of 25.
Sold in boxes of 25.
Sold in boxes of 25.
Right hand 11 degree Radura disc mower blade for Kuhn. Sold in boxes of 25.
Right hand 11 degree mower blade for MacDon. Sold in boxes of 25.
Right hand 11 degree Radura disc mower blade for Hesston. Sold in boxes of 25.
Right hand 11 degree bottom bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Right hand 11 degree top bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Right hand 18 degree bottom bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Right hand 18 degree top bevel Radura disc mower blade for AGCO and Challenger. Sold in boxes of 25.
Right Hand 14 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Right Hand 7 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
Right Hand 7 degree mower blade for Case-IH and New Holland. Sold in boxes of 25.
MUDSMITH HD SOLID GAUGE WHEEL, 3 X 16, 5/8"
3" solid gauge wheel Assembly, 5/8" bolt on.
MUDSMITH HD SOLID GAUGE WHEEL, 4.5 X 16, 5/8"
Mudsmith solid gauge wheel assembly, 5/8" bolt on bearing.
MUDSMITH SPOKED GAUGE WHEEL, 4.5 X 16, NO TIRE, 5/8", CIH
4.5" Mudsmith spoked gauge wheel without the tire, for CIH planters with a 5/8" bolt on style hub.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
Constructed of Polypropylene with Leak Resistant Dual EPDM O-rings.
NEEDLE BEARING, CIH 2162; MACDON FD70, 75
Needle bearing for Case-IH 2162 and MacDon FD70, FD75.
NORSEMAN CONICAL SCRAPER RING, JD, KINZE, MUDSMITH, NORSEMAN, PP CONCEAL TIRES
Norseman conical scraper ring for John Deere, Kinze, MudSmith, Norseman, and Precision Planting Conceal gauge wheel tires. Eliminates the OEM scraper. Doesn't put the brakes on your opener blades. Prevents premature tire wear. Conical profile keeps the scraper ring securely mounted and maintains optimal angle of attack to clean mud from blades. Unique mounting method allows flex to avoid mud build-up. Clean opener blades make for a well-defined seed trench. Use in conjunction with Norseman roller bearing gauge wheel arms to dramatically reduce maintenance intervals. NOTE: Gauge wheel sold separately.
NUT, M16-1.5, BALL JOINT KNFHD
Nut for the SCH ball joint knifeheads.
Flange nut for SCH sections, 6mm.
Disc mower nut for AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson and New Idea.
Disc mower nut for AGCO, Case-IH, Hesston, Massey Ferguson and New Idea.
Disc mower nut for Bush Hog and Case-IH.
Disc mower nut for Case-IH and New Holland.
Disc mower nut for Deutz-Fahr, Gehl, John Deere, Kuhn and New Holland.
Disc mower nut for John Deere. Required with RSP308234, RSP308235, RSP042022 and RSP042026.
Disc mower nut for Gehl, John Deere, Kuhn and New Holland.
Disc mower nut for Fella.
Disc mower nut for Krone.
Disc mower nut for AGCO, Challenger and Massey Ferguson. Required with RSP002500, RSP002400, RSP002300, RSP002200, RSP009040, RSP008040, RSP002700 and RSP002600.
In row crops, NutriPhi is used to promote efficient breakdown of crop residue, moving these nutrients back into the soil for quicker availability by the following crop. NutriPhi will also help break down herbicides that can damage the following crop. NutriPhi is specifically designed for beef, dairy, and hog operations to help manage solids, reduce run-off, and diminish harmful odors in barns, houses, and lagoons.
OEM GUARD, 2-PT, AGCO, GLEANER, AC, DEUTZ-ALLIS
Radura OEM Replacement Guard, 2-point, double hardened. Will fit AGCO all series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250.
OEM replacement guard, 2-point, double hardened. Will fit Case-IH 1010 and 1020 without trashbar.
OEM GUARD, 2-PT, CIH, JD, HSSTN, MD, MF, NH, WHT, 4-1/4" LONG
OEM replacement guard, 2-point with trash bar, 4-1/4" long, double hardened. Will fit the Case-IH, John Deere, Hesston, MacDon, Massey Ferguson, New Holland and White Farm.
OEM GUARD, 2-PT, CIH, MACDON, NH
OEM replacement guard, 2-point, double hardened. Will fit Case-IH 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D40, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
OEM replacement guard, 2-point, double hardened. Will fit Case-IH 3020, 3152, 3162 and New Holland 740CF, 840CD, 880CF
OEM GUARD, 2-PT, JD, MF, NH, NI, WHT
OEM replacement guard, 2-point, double hardened. Will fit John Deere, Massey Ferguson, New Holland, New Idea and White.
OEM GUARD, 3-PT, CENTER TOP, 600FD, 700FD
OEM Replacement Guard, 3-point center guard, double hardened. Will fit John Deere 600 and 700 series flex drapers.
OEM GUARD, 3-PT, JD 600D, 600R, 900D, LSL
OEM replacement guard, 3-point, long-short-long, 4" long point, double hardened. Will fit John Deere 600 series rigid and draper; 900 series draper.
OEM GUARD, 3-PT, JD 600D, 600R, 900D, SLS
OEM replacement guard, 3-point, short-long-short, 4" long point, double hardened. Will fit John Deere 600 series rigid and draper; 900 series draper.
OEM GUARD, 3-PT, JD 600F, 600FD, 700FD, NO-TILL, LSL
OEM replacement guard, 3-point, long-short-long, 4' no-till blunt point, double hardened. This guard doesn't have a cross bar and is recommended for no-till. Will fit John Deere 600 series flex and 600FD, 700FD flex draper platforms.
OEM GUARD, 3-PT, JD 600F, 600FD, 700FD, NO-TILL, SLS
OEM replacement guard, 3-point, short-long-short, 4' no-till blunt point, double hardened. This guard doesn't have a cross bar and is recommended for no-till. Will fit John Deere 600 series flex and 600FD, 700FD flex draper platforms.
OEM GUARD, 3-PT, OVERLAP, LH, 600FD, 700FD
OEM Replacement Guard, 3-point, left hand overlap, double hardened. Will fit John Deere 600 and 700 series flex drapers.
OEM GUARD, 3-PT, OVERLAP, RH, 600FD, 700FD
OEM Replacement Guard, 3-point, right hand overlap, double hardened. Will fit John Deere 600 and 700 series flex drapers.
OEM GUARD, BOTTOM CENTER GUARD, 2-PT, CIH, MACDON
OEM Replacement bottom center guard for overlap, 2-point. Will fit Case-IH 2142, 2152, 2162; MacDon D50, D60, D65, FD70, FD75.
OEM GUARD, HEAD GUARD, 2-PT, CIH, MACDON, NH
OEM replacement head guard, 2-point. Will fit Case-IH 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
OEM GUARD, HEAD GUARD, 2-PT, CIH, NH
OEM replacement head guard, 2-point. Will fit Case-IH 820, 1010, 1020, 2010, 2020 (s/n CBJ020001 & up) and New Holland 72C, 74C (s/n PNL017001 & up).
OEM GUARD, HEAD GUARD, 2-PT, CIH, NH
OEM replacement head guard, 2-point. Will fit Case-IH 3020, 3152, 3162 and New Holland 740CF, 840CD, 880CF.
OEM GUARD, LH END GUARD, 2-PT, CIH, MACDON, NH
OEM replacement left hand end guard, 2-point. Will fit Case-IH 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
OEM GUARD, RH END GUARD, 2-PT, CIH, MACDON, NH
OEM replacement right hand end guard, 2-point. Will fit Case-IH 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.
OEM GUARD, TOP CENTER GUARD, 2-PT, CIH, MACDON
OEM replacement top center guard, 2-point. Will fit Case-IH 2142, 2152, 2162; MacDon D50, D60, D65, FD70, FD75.
OEM KNFHD HDW, JD, CIH, MACDON, PKG OF 25
OEM KNFHD, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 25' & <, LH, RH
OEM replacement knifehead (120832) for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75, FD125, LH and RH, with 3" cutting system. NOTE: This knifehead is for platforms 25' and less.
OEM KNFHD, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 30' & >, RH
OEM replacement knifehead (132897) for Case-IH 2142, 2152, 2162; MacDon D50, D60, D65, D130, D135, D140, D145, FD70, FD75, FD130, FD135, FD140, FD145, RH, with 3" cutting system. NOTE: This knifehead is for platforms 30' and larger.
OEM replacement knifehead (132896) for Case-IH 2142, 2152, 2162; MacDon D50, D60, D65, D130, D135, D140, D145, FD70, FD75, FD130, FD135, FD140, FD145, LH, with 3" cutting system. NOTE: This knifehead is for platforms 30' and larger.
OEM KNFHD, JD 900 SERIES DRAPER
OEM replacement knifehead (AH220050) for John Deere 900 series Draper headers with 4" cutting system. Does not include mounting hardware; order RSP080080.
OEM SECTION BOLTS & NUTS, AGCO, CIH, JD, NH 3", PKG OF 10
50 each of 5/8" long ribbed bolts and locknuts for 3" cutting system. For OEM sections on: CIH 820, 1010, 1020, 2010, 2020; John Deere 200, 900 series auger platforms. Use with Radura sections: RSP080140, RSP010992, RSP080017.
OEM SECTION BOLTS & NUTS, JD 4", PKG OF 50
50 each of 16mm long bolts and locknuts for 4" cutting system. For OEM sections on: John Deere 900D draper, 600D draper, 600F flex platforms, 600R rigid platforms, 600FD, 700FD flex drapers. Use with Radura sections: RSP080010, RSP080011.
OEM SECTION, CIH 3020, 3152, 3162; NH 740CF, 840CD, 880CF, 11SPI, BOX OF 25
Box of 25, Case-IH & New Holland section, 11 serrations per inch. Fits Case-IH 3020, 3152, 3162 and New Holland 740CF, 840CD, 880CF platforms.
OEM SECTION, CIH, NH, 14SPI, BOX OF 25
ONE WRENCH, JD 750, 1850 DRILL
Adjust John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench.
ORBIT TRAC II STEEL UPDATE KIT, BOTTOM, 20' & SHORTER, LH
Orbit Trac II Update Kit, 20' and shorter, LH (Steel track for bottom half of Orbit Reel).
ORBIT TRAC II STEEL UPDATE KIT, BOTTOM, 20' & SHORTER, RH
Orbit Trac II Update Kit, 20' and shorter, RH (Steel track for bottom half of Orbit Reel).
ORBIT TRAC II STEEL UPDATE KIT, BOTTOM, 22' & LONGER
Orbit Trac II Update Kit, 22' and longer. (Steel track for bottom half of the Orbit Reel). This kit includes parts for both sides of the reel.
ORBIT TRAC II STEEL UPDATE KIT, TOP, 20' & SHORTER
Orbit Trac II Update Kit, 20' and shorter, (Steel track for top half of Orbit Reel).
ORBIT TRAC II STEEL UPDATE KIT, TOP, 22' & LONGER
Orbit Trac II Update Kit, 22' and longer, (Steel track for top half of Orbit Reel).
ORBIT TRAC II, AGCO, 400-8000 SERIES, 22' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, AGCO, 400-8000 SERIES, 25-35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, AGCO/MF 8200, 20' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, AGCO/MF 8200, 25-35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 1010-1020, 1994 & PRIOR, 20' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 1010-1020, 1994 & PRIOR, 22' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 1010-1020, 1995-1997, 20' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 1010-1020, 1995-1997, 22' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 1010-1020, 1998 & NEWER, 20' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 1010-1020, 1998 & NEWER, 22' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 2010, 2020; NH 72C, 74C, 20' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 2010, 2020; NH 72C, 74C, 22-35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 3020, NH 740CF, 20'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, CIH 3020, NH 740CF, 25-35'
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, HONEY BEE, DOUBLE ECCENTRIC
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, JD 600 SERIES, 22' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.NOTE: Will not fit Flex Draper.
ORBIT TRAC II, JD 600 SERIES, 25' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.NOTE: Will not fit Flex Draper.
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, JD 900 SERIES, 22' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990. For 900 series headers with serial number 645301 and up.
ORBIT TRAC II, JD 900 SERIES, 25' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, MF DRAPER, DOUBLE ECCENTRIC
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, NH 73C, 20' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, NH 73C, 22' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, NH 970-973, 22' & SHORTER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
ORBIT TRAC II, NH 970-973, 25' & LONGER
The new and improved Orbit Trac II Reel kit has all track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.
OTICO SOLID GAUGE WHEEL, 3 X 16, 5/8"
Otico Solid Gauge Wheel Assembly with 3" x 16" standard tire with 5/8" bearing. Will fit Great Plains YP Series, John Deere, Kinze, Monosem and White series planters.
OTICO SOLID GAUGE WHEEL, 4.5 X 16, 5/8", CIH
Otico Solid Gauge Wheel Assembly with 4.5" x 16" reduced inner diameter (RID) tire with 5/8 bearing. Will fit Case-IH 1200 and 2000 series.
OTICO SOLID GAUGE WHEEL, 4.5 X 16, JD XP, 5/8"
Otico Solid Gauge Wheel Assembly with 4.5" x 16" standard tire with 5/8" bearing. Will fit Great Plains YP Series, John Deere, Kinze, Monosem and White series planters.
OTICO SPOKED GAUGE WHEEL, 3 X 16, 5/8"
Otico Spoked Gauge Wheel Assembly with 3" x 16" standard tire with 5/8" bearing. Will fit Great Plains YP Series, John Deere, Kinze, Monosem and White series planters.
OTICO SPOKED GAUGE WHEEL, 4.5 X 16, 5/8"
Gauge Wheel Assembly with 4.5" x 16" Otico Spoked Gauge Wheel Assembly with 4.5" x 16" standard tire with 5/8" bearing. Will fit Great Plains YP Series, John Deere, Kinze, Monosem and White series planters.
OTICO SPOKED GAUGE WHEEL, 4.5 X 16, 5/8"
Gauge Wheel Assembly with 4.5" x 16" standard profile tire mounted on black metal halves with black plastic hub with 5/8 bearing. Will fit John Deere MaxEmerge XP, XP Pro planters; John Deere drills 1530, 1535 with MaxEmerge XP row units.
OTICO SPOKED GAUGE WHEEL, 4.5 X 16, 5/8", CIH
Otico Spoked Gauge Wheel Assembly with 4.5" x 16" standard tire with 5/8" bearing. Will fit Case-IH 1200 and 2000 series.
OUTBACK WRAP, ANACONDA, 10', BLUE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Anaconda Wrap will fit hoses up to 1-1/4" (32mm) in diameter. Includes 10' of bulk wrap. Blue in color.
OUTBACK WRAP, ANACONDA, 10', GREEN
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Anaconda Wrap will fit hoses up to 1-1/4" (32mm) in diameter. Includes 10' of bulk wrap. Green in color.
OUTBACK WRAP, ANACONDA, 10', ORANGE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Anaconda Wrap will fit hoses up to 1-1/4" (32mm) in diameter. Includes 10' of bulk wrap. Orange in color.
OUTBACK WRAP, ANACONDA, 10', RED
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Anaconda Wrap will fit hoses up to 1-1/4" (32mm) in diameter. Includes 10' of bulk wrap. Red in color.
OUTBACK WRAP, ANACONDA, 10', YELLOW
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Anaconda Wrap will fit hoses up to 1-1/4" (32mm) in diameter. Includes 10' of bulk wrap. Yellow in color.
OUTBACK WRAP, ANACONDA, 80', BLUE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Anaconda Wrap will fit hoses up to 1-1/4" in diameter. Blue in color.
OUTBACK WRAP, ANACONDA, 80', GREEN
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Anaconda Wrap will fit hoses up to 1-1/4" in diameter. Green in color.
OUTBACK WRAP, ANACONDA, 80', ORANGE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Anaconda Wrap will fit hoses up to 1-1/4" in diameter. Orange in color.
OUTBACK WRAP, ANACONDA, 80', RED
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Anaconda Wrap will fit hoses up to 1-1/4" in diameter. Red in color.
OUTBACK WRAP, ANACONDA, 80', YELLOW
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Anaconda Wrap will fit hoses up to 1-1/4" in diameter. Yellow in color.
Outback Wrap Bat Wrap is a heavy duty velcro wrap used to bundle and lift hoses, cables or wires, up to 700 pounds, out of the way. Easy to use. Just wrap the Bat Wrap around the hoses, cables or wires and secure with a tarp strap or rope. (Tarp strap or rope NOT included.)
OUTBACK WRAP, CONSTRICTOR, 20', BLUE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Constrictor Wrap will fit hoses up to 5/8" (16mm) in diameter. Includes 20' of bulk wrap. Blue in color.
OUTBACK WRAP, CONSTRICTOR, 20', GREEN
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Constrictor Wrap will fit hoses up to 5/8" (16mm) in diameter. Includes 20' of bulk wrap. Green in color.
OUTBACK WRAP, CONSTRICTOR, 20', ORANGE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Constrictor Wrap will fit hoses up to 5/8" (16mm) in diameter. Includes 20' of bulk wrap. Orange in color.
OUTBACK WRAP, CONSTRICTOR, 20', RED
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Constrictor Wrap will fit hoses up to 5/8" (16mm) in diameter. Includes 20' of bulk wrap. Red in color.
OUTBACK WRAP, CONSTRICTOR, 20', YELLOW
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Constrictor Wrap will fit hoses up to 5/8" (16mm) in diameter. Includes 20' of bulk wrap. Yellow in color.
OUTBACK WRAP, CONSTRICTOR, 80', BLUE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Constrictor Wrap will fit hoses up to 5/8" in diameter. Blue in color.
OUTBACK WRAP, CONSTRICTOR, 80', GREEN
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Constrictor Wrap will fit hoses up to 5/8" in diameter. Green in color.
OUTBACK WRAP, CONSTRICTOR, 80', ORANGE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Constrictor Wrap will fit hoses up to 5/8" in diameter. Orange in color.
OUTBACK WRAP, CONSTRICTOR, 80', RED
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Constrictor Wrap will fit hoses up to 5/8" in diameter. Red in color.
OUTBACK WRAP, CONSTRICTOR, 80', YELLOW
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Constrictor Wrap will fit hoses up to 5/8" in diameter. Yellow in color.
Our Outback Wrap Fuel Finder is designed to identify your fuel tank hoses and makes fueling up easy! This package contains one green wrap (road diesel), red wrap (dyed diesel) and yellow (gasoline) to identify the type of fuel being used. The wraps are 20mm (13/16" ) in diameter and 11" long. Fits hoses 1/2" to 3" in diameter
OUTBACK WRAP, HOSE BOSS, 4', BLACK
OUTBACK WRAP, HOSE BOSS, 4', BLUE
Outback Wrap "Hose Boss" is a step up from our Hose Tamer. The Hose Boss is a 4' long wrap that is 3" in diameter. Made from heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses. Blue in color.
OUTBACK WRAP, HOSE BOSS, 4', GREEN
Outback Wrap "Hose Boss" is a step up from our Hose Tamer. The Hose Boss is a 4' long wrap that is 3" in diameter. Made from heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses. Green in color.
OUTBACK WRAP, HOSE BOSS, 4', ORANGE
OUTBACK WRAP, HOSE BOSS, 4', RED
Outback Wrap "Hose Boss" is a step up from our Hose Tamer. The Hose Boss is a 4' long wrap that is 3" in diameter. Made from heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses. Red in color.
OUTBACK WRAP, HOSE BOSS, 4', YELLOW
Outback Wrap "Hose Boss" is a step up from our Hose Tamer. The Hose Boss is a 4' long wrap that is 3" in diameter. Made from heavy duty polyethylene plastic, it is thick enough to contain a large number of hoses. Yellow in color.
OUTBACK WRAP, HOSE MARKER, 2-PAIRS, BROWN, PURPLE
OUTBACK WRAP, HOSE MARKER, 2-PAIRS, GRAY, PURPLE
Outback Wrap hydraulic hose markers make it easy to identify hydraulic hoses and connect them to farming equipment. Outback Wrap can be used on any hydraulic hose or on any pipe that connects equipment using hydraulics. This 2-Pair package contains (2) pairs that fit 1/4" to 1-1/2" hoses. Contains a pair of gray and purple markers.
OUTBACK WRAP, HOSE MARKER, 2-PAIRS, GREEN, BLUE
Outback Wrap hydraulic hose markers make it easy to identify hydraulic hoses and connect them to farming equipment. Outback Wrap can be used on any hydraulic hose or on any pipe that connects equipment using hydraulics. This 2-Pair package contains (2) pairs that fit 1/4" to 1-1/2" hoses. Contains a pair of green and blue markers.
OUTBACK WRAP, HOSE MARKER, 4-PAIRS, BROWN, PURPLE, WHITE, BLACK
OUTBACK WRAP, HOSE MARKER, 4-PAIRS, YELLOW, BLUE, RED, GREEN
OUTBACK WRAP, HOSE TAMER, 18", BLACK
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Black in color.
OUTBACK WRAP, HOSE TAMER, 18", BLUE
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Blue in color.
OUTBACK WRAP, HOSE TAMER, 18", BROWN
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Brown in color.
OUTBACK WRAP, HOSE TAMER, 18", GRAY
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Gray in color.
OUTBACK WRAP, HOSE TAMER, 18", GREEN
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Green in color.
OUTBACK WRAP, HOSE TAMER, 18", ORANGE
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Orange in color.
OUTBACK WRAP, HOSE TAMER, 18", PINK
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Pink in color.
OUTBACK WRAP, HOSE TAMER, 18", PURPLE
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Purple in color.
OUTBACK WRAP, HOSE TAMER, 18", RED
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Red in color.
OUTBACK WRAP, HOSE TAMER, 18", WHITE
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! White in color.
OUTBACK WRAP, HOSE TAMER, 18", YELLOW
Outback Wrap Hose Tamer is the answer to messy and unruly hoses! The Hose Tamer is 40mm in diameter and 18” in length. It can be easily switched between equipment and can tame up to 14 hoses. Choose whichever color you like best or if you can’t decide...buy a mix! Yellow in color.
OUTBACK WRAP, POWER BEYOND PACK
Outback Wrap hydraulic hose markers make it easy to identify hydraulic hoses and connect them to farming equipment. Outback Wrap can be used on any hydraulic hose or on any pipe that connects equipment using hydraulics. This 4-Pair package contains (4) pairs that fit 1/4" to 1-1/2" hoses. This package contains (6) wraps that fit 1/4" to 1-1/2" hose. Contains contains (6) wraps for your tractors Power Beyond.
OUTBACK WRAP, PYTHON, 15', BLACK
OUTBACK WRAP, PYTHON, 15', BLUE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Python Wrap will fit hoses up to 13/16" (20mm) in diameter. Includes 15' of bulk wrap. Blue in color.
OUTBACK WRAP, PYTHON, 15', GREEN
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Python Wrap will fit hoses up to 13/16" (20mm) in diameter. Includes 15' of bulk wrap. Green in color.
OUTBACK WRAP, PYTHON, 15', ORANGE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Python Wrap will fit hoses up to 13/16" (20mm) in diameter. Includes 15' of bulk wrap. Orange in color.
OUTBACK WRAP, PYTHON, 15', RED
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Python Wrap will fit hoses up to 13/16" (20mm) in diameter. Includes 15' of bulk wrap. Red in color.
OUTBACK WRAP, PYTHON, 15', YELLOW
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Python Wrap will fit hoses up to 13/16" (20mm) in diameter. Includes 15' of bulk wrap. Yellow in color.
OUTBACK WRAP, PYTHON, 80', BLACK
OUTBACK WRAP, PYTHON, 80', BLUE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Python Wrap will fit hoses up to 13/16" in diameter. Blue in color.
OUTBACK WRAP, PYTHON, 80', GREEN
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Python Wrap will fit hoses up to 13/16" in diameter. Green in color.
OUTBACK WRAP, PYTHON, 80', ORANGE
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Python Wrap will fit hoses up to 13/16" in diameter. Orange in color.
OUTBACK WRAP, PYTHON, 80', RED
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Python Wrap will fit hoses up to 13/16" in diameter. Red in color.
OUTBACK WRAP, PYTHON, 80', YELLOW
Outback Wrap "Snake Collection" is a wrap that can be used to wrap their entire planters, other implements or electrical cables. The Snake Collection is sold by the box and each box contains 80' of wrap. The Python Wrap will fit hoses up to 13/16" in diameter. Yellow in color.
OUTBACK WRAP, SNAKELET, 160', BLACK
OUTBACK WRAP, SNAKELET, 160', BLUE
OUTBACK WRAP, SNAKELET, 160', GREEN
OUTBACK WRAP, SNAKELET, 160', RED
OUTBACK WRAP, SNAKELET, 160', YELLOW
OUTBACK WRAP, SNAKELET, 5', BLACK
OUTBACK WRAP, SNAKELET, 5', BLUE
OUTBACK WRAP, SNAKELET, 5', GREEN
OUTBACK WRAP, SNAKELET, 5', ORANGE
OUTBACK WRAP, SNAKELET, 5', RED
OUTBACK WRAP, SNAKELET, 5', YELLOW
Oval head bolt, M6-1mmx16mm for John Deere 600FD and 700FD.
Oval head bolt, M6-1mmx20mm for John Deere 600FD and 700FD.
Oval head bolt, M6-1mmx25mm for John Deere 600FD and 700FD.
P/D KIT, AGCO 300,500,800,8000, AGCO
SCH Pro-Drive Kit available for AGCO Flex 300 - 8000 Series. Please specify tie rod bolt size (3/4" or 7/8") with AGCO Cutter Bar.
P/D KIT, AGCO 300,500,800,8000, SCH
SCH Pro-Drive Kit available for AGCO Flex 300 - 8000 Series.
P/D KIT, MASSEY-WHITE 9750, OEM CUTTERBAR
SCH Pro-Drive Kit available for Massey-White Flex 9750 Series. Knifehead for Massey-White cutting system is not available. A knifehead clamp is provided that must be welded to original knifehead strap.
P/D KIT, MASSEY-WHITE 9750, SCH
SCH Pro-Drive Kit available for Massey-White Flex 9750 Series.
Lower parallel linkage arm, 16" standard length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
Lower parallel linkage arm, 23" extended length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
PARALLEL ARM, LOWER, HEAVY DUTY, CIH 1200, 1300
Required when installing Martin UMO fertilizer openers on a CIH 1200 and 1300 series planter for no-till situations.
Upper parallel linkage arm, 16" standard length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
Upper parallel linkage arm, 23" extended length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
PARALLEL LINKAGE REBUILD KIT, JD 7000, 7100; KINZE
Parallel Linkage Rebuild Kit, Row. For John Deere 7000, 7100 & Kinze Planters, (Must drill out parallel linkage to 1 3/32"). Will not work with parallel linkage MOUNTED no-till coulter. Kit Includes, 8 oversized bushings, 8 special shouldered bolts & 8 locknuts.
PARALLEL LINKAGE REBUILD KIT, JD 7200, 7300, 1700
Parallel Linkage Rebuild Kit, Row. For John Deere 7200, 7300 & 1700 series planters, (No drilling required). Kit Includes, 8 bushings, 8 special shouldered bolts & 8 locknuts.
PATCH BOLT, 5/8" X 1-3/4" FLANGE BOLT
5/8" x 1 3/4" flange patch bolt used for attaching the hub assembly to the WA1360 row cleaner frame.
PheNom can be applied liquid in furrow (16oz/acre) or Foliar (16oz/acre). Contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
PheNom can be applied liquid in furrow (16oz/acre) or Foliar (16oz/acre). Contains 1 x 2.5 gallon jug. This product is a biological. Any returns require pre-approval due to shelf life.
PheNom, seed treatment, is applied at 2oz/cwt. This product is a biological. Any returns require pre-approval due to shelf life.
PILLOW BLOCK BEARING, SMART-TILL
PILLOW BLOCK HOUSING, SMART-TILL
This adapter raises the center stainless steel impact plate by 1/2" from the original 1" depth set by the Set-N-Seed. So your minimum starting depth with this adapter can be 1/2".
Long lasting self-lubricating plastic chain tightner and/or Wear Block with 9/16" hole.
Plug for Case-IH 2162 and MacDon FD75.
Steel plug for Case-IH 2162 and MacDon FD75.
POLY CAP BOLT, 1/4" X 1", BLACK, PKG OF 12
1/4" x 1" package of 12 poly cap bolt. Black in color.
POLY CAP BOLT, 1/4" X 1", WHITE, PKG OF 12
1/4" x 1" package of 12 poly cap bolt. White in color.
POLY CAP BOLT, 3/8" X 1", BLACK, PKG OF 12
3/8" x 1" package of 12 poly cap bolt. Black in color.
POLY CAP BOLT, 3/8" X 1", WHITE, PKG OF 12
3/8" x 1" package of 12 poly cap bolt. White in color.
POLY CAP BOLT, 5/16" X 1", BLACK, PKG OF 12
5/16" x 1" package of 12 poly cap bolt. Black in color.
POLY CAP BOLT, 5/16" X 1", WHITE, PKG OF 12
5/16" x 1" package of 12 poly cap bolt. White in color.
POLY CUTTING EDGE, HORIZONTAL, 4" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 4" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 4" X 3/4"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 6" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 6" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 6" X 3/4"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 8" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 8" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 8" X 3/4"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 6" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 6" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 8" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 8" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY FINGER KIT, AGCO, CHALLENGER
AGCO 7000, 7200, 8000, 8200 and Challenger FH, FHB poly finger kit. Guide and hardware included.
POLY FINGER KIT, AGCO, CHALLENGER, SINGLE
AGCO 700, 800, 7000, 7200, 8000, 8200 and AGCO 700, 800, 7000, 7200, 8000, 8200 and Challenger FH, FHB poly finger kit. Guide and hardware included.
Lexion V525, V535, V540, V750, V900, F25, F30, F525, F750, F900, G30 and G525 poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, LEXION, SINGLE
Lexion V1050, V1200, F535, F540, G535 and G540 poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, MACDON, PKG OF 12
MacDon 872, 873 with 12" Auger Drum poly finger kit, package of 12. Guide kit and hardware included.
POLY FINGER KIT, MACDON, PKG OF 12
MacDon FM100 float module poly finger kit - package of 12. Guide kit and hardware included.
POLY FINGER KIT, MACDON, SINGLE
MacDon 872, 873 with 12" Auger Drum poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, MACDON, SINGLE
MacDon FM100 float module poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, NH 971, 972, 973, SINGLE
New Holland 971, 972, 973 poly finger kit. Guide kit and hardware included.
POLY FINGER ONLY, NH 971, 972, 973
New Holland 971, 972, 973 poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, NH 971, 972, 973, PKG OF 100
New Holland 971, 972, 973 poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, NH 971, 972, 973, PKG OF 24
New Holland 971, 972, 973 poly finger only, package of 24. Guide kit and hardware NOT included.
POLY KIT, 30', JD 630FD, 730FD, RD30F, PRE-DRILLED, 1/4", (2016 & NEWER)
30' Poly Skid Shoe Set for John Deere 630FD, 730FD, RD30F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 30', JD 630FD, 730FD, RD30F, PRE-DRILLED, 3/8", (2016 & NEWER)
30' Poly Skid Shoe Set for John Deere 630FD, 730FD, RD30F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 35', JD 635FD, 735FD, RD35F, PRE-DRILLED, 1/4", (2016 & NEWER)
35' Poly Skid Shoe Set for John Deere ohn Deere 635FD, 735FD, RD35F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 35', JD 635FD, 735FD, RD35F, PRE-DRILLED, 3/8", (2016 & NEWER)
35' Poly Skid Shoe Set for John Deere 635FD, 735FD, RD35F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 40', JD 640FD, 740FD, RD40F, PRE-DRILLED, 1/4", (2016 & NEWER)
40' Poly Skid Shoe Set for John Deere 640FD, 740FD, RD40F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 40', JD 640FD, 740FD, RD40F, PRE-DRILLED, 3/8", (2016 & NEWER)
40' Poly Skid Shoe Set for John Deere 640FD, 740FD, R40F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 45', JD 645FD, 745FD, RD45F, PRE-DRILLED, 1/4", (2016 & NEWER)
45' Poly Skid Shoe Set for John Deere 640FD, 740FD, RD40F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 45', JD 645FD, 745FD, RD45F, PRE-DRILLED, 3/8", (2016 & NEWER)
45' Poly Skid Shoe Set for John Deere 645FD, 745FD, RD45F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
25 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
30 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
40 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
35 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 25', PREDRILLED, 1/4"
25 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 30', PREDRILLED, 1/4"
30 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 35', PREDRILLED, 1/4"
35 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 40', PREDRILLED, 1/4"
40 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 45', PREDRILLED, 1/4"
45 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 25', PREDRILLED 1/4"
25 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 30', PREDRILLED 1/4"
30 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 35', PREDRILLED 1/4"
35 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 40', PREDRILLED 1/4"
40 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 13' X 1/4"
13 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 15' X 1/4"
15 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 16' X 1/4"
16 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 18' X 1/4"
18 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 20' X 1/4"
20 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 22' X 1/4"
22 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 24' X 1/4"
24 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 13', PREDRILLED 1/4" (1987 & Newer)
13 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 15', PREDRILLED 1/4" (1987 & Newer)
15 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 16', PREDRILLED 1/4" (1987 & Newer)
16 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 18', PREDRILLED 1/4" (1987 & Newer)
18 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 20', PREDRILLED 1/4" (1987 & Newer)
20 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 22', PREDRILLED 1/4" (1987 & Newer)
22 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 24', PREDRILLED 1/4" (1987 & Newer)
24 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 25', PREDRILLED 1/4" (1987 & Newer)
25 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 30', PREDRILLED 1/4" (1987 & Newer)
30 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
20 Ft. Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
25 Ft. Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
30 Ft. Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
20 Ft. Case-IH 2020 (serial #CBJ020701 - CBJ021300); New Holland 74C (serial #PNL017800 - PNL018300) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
25 Ft. Case-IH 2020 (serial #CBJ020701 - CBJ021300); New Holland 74C (serial #PNL017800 - PNL018300) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
30 Ft. Case-IH 2020 (serial #CBJ020701 - CBJ021300); New Holland 74C (serial #PNL017800 - PNL018300) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
20 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 20' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
20 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
25 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 25' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
25 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
30 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 30' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
35 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 35' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
Case-IH 2052 (after serial #CCC0014710); MacDon 973, 974 (2006 & newer) Draper Skid Shoe Set - White - 3/8" - Predrilled. Will fit 21' and 25'. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
Case-IH 2052 (after serial #CCC0014710) and MacDon 973 (2006 & newer) - Draper Skid Shoe Set - White - 3/8" - Predrilled. Will fit 30', 36', and 39'. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 21', PRE-DRILLED 3/8"
21 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 36', PRE-DRILLED 3/8"
36 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 39', PRE-DRILLED 3/8"
39 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
Case-IH 2062 (after serial #CCC0015328); MacDon (2006 & Newer); New Holland 84C (after serial #PPP001119) Skid Shoe Set - White - 3/8" - Predrilled. Will fit 30' and 36'. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CIH 3020, NH 740CF, 20' DD, PRE-DRILLED 3/8"
20 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 20' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 20', PRE-DRILLED 3/8"
20 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 25' DD, PRE-DRILLED 3/8"
25 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 25' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 30' DD, PRE-DRILLED 3/8"
30 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 30' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 35' DD, PRE-DRILLED 3/8"
35 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 35' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 35', PRE-DRILLED 3/8"
35 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 35', PRE-DRILLED 3/8"
35 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 40', PRE-DRILLED 3/8"
40 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 45', PRE-DRILLED 3/8"
45 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH, MACDON, NH; 30',35',40', 45', PRE-DRILLED 3/8"
Case-IH 2162/2152/2142; MacDon FD70/D60/D50; New Holland 86C/83C/82C Draper Skid Shoe Set - White - 3/8" - Predrilled. Will fit 30', 35', 40' and 45'. Mounting hardware included. Center skid shoe, MYW042061, not included in kit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 15', PRE-DRILLED, 1/4"
15 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 17', PRE-DRILLED, 1/4"
17 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 20', PRE-DRILLED, 1/4"
20 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 25', PRE-DRILLED, 1/4"
25 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 30', PRE-DRILLED, 1/4"
30 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 20', PRE-DRILLED 1/4"
20 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 25', PRE-DRILLED 1/4"
25 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 30', PRE-DRILLED 1/4"
30 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 35', PRE-DRILLED 1/4"
35 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 618F, 18', PRE-DRILLED 1/4"
18 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 618F, 18', PRE-DRILLED 3/8"
18 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 620F, 20', PRE-DRILLED 1/4"
20 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 620F, 20', PRE-DRILLED 3/8"
20 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 622F, 22', PRE-DRILLED 1/4"
22 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 622F, 22', PRE-DRILLED 3/8"
22 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 625F, 25', PRE-DRILLED 1/4"
25 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 625F, 25', PRE-DRILLED 3/8"
25 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 630F, 30', PRE-DRILLED 1/4"
30 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 630F, 30', PRE-DRILLED 3/8"
30 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 635F, 35', PRE-DRILLED 1/4"
35 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 635F, 35', PRE-DRILLED 3/8"
35 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, MACDON 960, 962, 25', UNDRILLED 1/4"
25 Ft. MacDon 960, 962 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 960, 962, 30', UNDRILLED 1/4"
30 Ft. MacDon 960, 962 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 960, 962, 36', UNDRILLED 1/4"
36 Ft. MacDon 960, 962 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 21', UNDRILLED 1/4"
21 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 25', UNDRILLED 1/4"
25 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 30', UNDRILLED 1/4"
30 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 36', UNDRILLED 1/4"
36 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, 30', PRE-DRILLED, 3/8"
30 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY PICKUP BAND, AGCO, CIH, CHALLENGER, HESSTON, M/F, ROUND BALER
Poly Pickup Band for AGCO 5446A, 5456A, 5546, 5556A; Case-IH 8435, RS451, RS551, RS561, RS561A; Challenger RB46, RB46B, RB463A, RB56B, RB563A; Hesston 845, 846A, 855, 856, 856A, 945, 946A, 955, 956; Massey Ferguson 2646A, 2656A, 2746A, 2756A.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit standard size head RBX441, RBX442 , RBX443 (after serial number Y7N030707) and RB444.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit standard size head model RBX443 prior to serial number Y7N030706.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit standard size head RBX552, RBX553, RBX554, RBX562, RB563 and RB564.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 1.5M size head BX451, RBX452, RBX453, RBX461, RBX462, RBX463, RBX454 and RBX464. Will also fit 1.8M head size RBX453.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 1.8M size head RBX452, RBX462, RBX463, RBX464; 2.0m head size RBX452, RBX453, RBX462, RBX463, RBX464 ; outer 10 on RBX552, RBX562, RBX563 with 2.0m head size.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 2.0M size head RBX552, RBX562, RBX563 and RB564. Required on the middle 21 bands.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 1.5M head size RB565; requires 23.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 2.0M head size RB565; requires 31.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit RB455, RB465 1.5M and 2.0M head size. Will require 27 poly bands on 1.8M and 31 on 2.0M.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH 8550, 8570, 8575 and 8585.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH LB324, LB333, LB334, LB424, LB433, LB434, LBX322, LBX331, LBX332, LBX421, LBX422 with standard and packer cutter head.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH LB324, LB333, LB334, LB424, LB433, LB434, LBX322, LBX331, LBX332, LBX421, LBX422 with roto cutter head.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH SB521, SB531, SB541, SB551, SBX520, SBX530, SBX540 and SBX550.
Poly Pickup Band for Claas balers and self-propelled forage Harvesters. Will fit Jaguar 820, 840, 860, 880; Quadrant 2100, 2200, 3200, 3300, 3400, 3500, 3800, 4500, 5500, 6800; Rollant 240, 250, 254, 255, 340, 350, 355, 454, 455; Variant 180, 260, 280.
POLY PICKUP BAND, JD HARVESTER
Poly Pickup Band for John Deere self propelled harvestor. Will fit 630A, 640A, 645A, 630B, 640B, 645B, 630C, 640C and 645C.
POLY PICKUP BAND, JD ROUND BALER
Poly Pickup Band for John Deere round baler. Will fit 330, 335, 375, 385, 430, 435, 447, 448, 449, 456, 458, 459, 466, 467, 468, 469, 535, 545, 546, 547, 550, 556, 558, 559, 566, 567, 568, 569, 570, 572, 580, 582, 590, 592.
POLY PICKUP BAND, JD ROUND BALER
Poly Pickup Band for John Deere med wide head round baler, outer three bands.
POLY PICKUP BAND, JD ROUND BALER
Poly Pickup Band for John Deere round baler. Will fit 447, 448, 449, 456, 458, 459, 466, 467, 468, 469, 535, 545, 546, 547, 550, 556, 558, 559, 566, 567, 568, 569.
Poly Pickup Band for New Holland Self-Propelled Chopper. Will fit 280FP, 290FP, 380FPA, 380FPE, 346W, 356W, 366W.
POLY PICKUP BAND, NH RB450, RB460, 1.8M & 2.0M
Poly Pickup Band for New Holland round baler. Will fit RB450, RB460, 1.5M and 2.0M head size. Will require 27 poly bands on 1.8M and 31 on 2.0M. Includes hardware.
POLY PICKUP BAND, NH RB550, RB560, 1.5M
Poly Pickup Band for New Holland Round Baler. Will fit RB550, RB560, 1.5M head size. Will require 23 poly bands for 1.5M. Includes hardware.
POLY PICKUP BAND, NH RB550, RB560, 2.0M
Poly Pickup Band for New Holland Round Baler. Will fit RB550, RB560, 2.0m head size. Will require 31 poly bands for 2.0M. Includes hardware.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland round baler. Will fit standard size head BR770, BR770A, BR780, BR780A, BR7080, BR7090.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit 630, 634, 638, 640, 650, 660, BR730, BR730A (s/n Y7N030707 & after), BR7050, BR7060.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit 644, 648, 654, 658, 664, 678, 688, BR730A (prior to s/n Y7N030706), BR740, BR740A.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit outer 10 on 1.8M head BR7060, BR7070; outer 10 on 1.8M x.s. head BR740, BR740A, BR750, BR750A; requires 31 on 2.0M head BR7060, BR7070, BR740, BR740A, BR750, BR750A, BR780; outer 10 on 2.0M x.s. head BR7090, BR780A.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit middle 21on 1.8M head BR7060, BR7070; middle 17 on 1.8M x.s. head BR740, BR740A, BR750, BR750A; middle 21 on 2.0M x.s. head BR7090, BR780A.
POLY PICKUP BAND, NH ROUND BALER, 1.5M
Poly Pickup Band for New Holland Round Baler. Will fit 640, 644, 648, 650, 654, 658, BR7060, BR7070, BR740, BR740A, BR750, BR750A, RB450, RB460. Requires 23 on 1.5M head size. Includes hardware.
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland Square Baler. Will fit 27P, 29P, 707W, 717W, 770W, 790W, 880W, 890W, 900W, 919W3, 919W4 and 990W; 585 with roto cutter head
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland square baler. Will fit New Holland 590, 595, BB940, BB960, BB9050, BB9060, BB9070, BB9080, 230, 330, 340 with roto cutter head.
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland Square Baler. Will fit 276, 311, 315, 316, 320, 326, 565, 568, 570, 575, 580, BC5050, BC5060, BC5070, BC5080 with roto cutter head.
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland square baler. Will fit New Holland 590, 595, BB940, BB960, BB9050, BB9060, BB9070, BB9080, 230, 330, 340 with standard and packer cutter head.
Poly Pickup Band for Vermeer round baler. Will fit Vermeer I, Super I, J, Super J, K, L, XL, Super M, N, Rancher, Rebel.
Poly Pickup Band for Vermeer round baler. Will fit Vermeer Pro Baler.
POLY SHOES, NH 489, 499, 1495, 1496, PAIR
New Holland 489, 499, 1495, 1496 Haybine - 13" x 13.5". All Hardware is included. All Skid Shoes are Undrilled unless otherwise specified.
Furrow control strap.
Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Center Skid Shoe - 29" x 21" - Black- 1/4"- Predrilled.
Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) End Skid Shoe - 23" x 21" - Black- 1/4"- Predrilled.
Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C Center Skid Shoe - 29" x 24" - Black - 1/4" - Predrilled.
Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C Right End Skid Shoe - 23" x 24" - Black - 1/4" - Predrilled.
Case-IH 2020 (before serial #CBJ020001 - CBJ020700 & all HAJ), New Holland 74C (before serial #PNL017183 - PNL017800 & all HAJ), New Holland 973/73C End Skid Shoe - 7" x 30" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a double drive platform.
Case-IH 2020 (before serial #CBJ020001 - CBJ020700 & all HAJ), New Holland 74C (before serial #PNL017183 - PNL017800 & all HAJ), New Holland 973/73C Right End Skid Shoe - 4.5" x 30" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a single drive platform.
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Center Skid Shoe - 29" x 18" - Black - 1/4" - Predrilled.
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), End Skid Shoe - 17" x 18" - Black - 1/4" - Predrilled.
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Left End Skid Shoe - 7" x 25.5" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a double drive platform.
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Right End Skid Shoe - 7" x 25.5" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a double drive platform.
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Right End Skid Shoe - 14.5" x 18" - Black - 1/4" - Predrilled.
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Right End Skid Shoe - 4.5" x 25" - Black - 1/4" - Predrilled.
Case-IH 2020 (serial # CBJ020701 - CBJ021300), New Holland 74C (serial # PNL017801 - PNL018300), End Shoe - 6.5" x 24" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3020, 3152, 3162, NH 740CF, 880CF, 840CD, CUTTERBAR SKID SHOE, 5.75 X 8 X 3/8
Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF, 840CD Cutterbar Skid Shoe - 5.75" x 8" - Black - 3/8" - Predrilled.
POLY, BLACK, CIH 3020, 3152, 3162, NH 740CF, 880CF, 840CD, END SKID SHOE, LH, 8.5 X 22.5 X 1/4
Case-IH 3020, 3152, 3162; New Holland 740CF, 840CD Left End Skid Shoe - 8.5" x 22.5" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3020, 3152, 3162, NH 740CF, 880CF, 840CD, END SKID SHOE, RH, 5 X 15.25 X 1/4
Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF, 840CD Right End Skid Shoe - 5" x 15.25" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3020, NH 740CF, END SKID SHOE, DD, RH, 8.5 X 22.5 X 1/4
Case-IH 3020, New Holland 740CF, Right End Skid Shoe - 8.5" x 22.5" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a Case-IH 3020 and New Holland 740CF double drive.
POLY, BLACK, CIH 3020, NH 740CF, SKID SHOE, DD, RH, 8.75 X 8 X 1/4
Case-IH 3020, New Holland 740CF, Right End Skid Shoe - 8.75" x 8" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a Case-IH 3020 and New Holland 740CF double drive.
POLY, BLACK, CIH 3152, 3162, NH 880CF, 840CD, CENTER SKID SHOE, 14.75 X 33 X 1/4
Case-IH 3152, 3162; New Holland 880CF, 840CD Center Skid Shoe - 5" x 15.25" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3152, 3162, NH 880CF, 840CD, END SKID SHOE, LH, 5 X 15.25 X 1/4
Case-IH 3152, 3162; New Holland 880CF, 840CD Left End Skid Shoe - 5" x 15.25" - Black - 1/4" - Predrilled.
POLY, BLACK, MACDON, DRAPER SKID PLATE, 35-7/16 X 79 X 1/4
MacDon FD75/D65 Replacement Draper Skid Plate- 35-7/16""x79" - 1/4" Thick - Predrilled. Not included in kits. Please order separately.
POLY, BLACK, NH 973/73C, CENTER SKID SHOE, 35 X 24 X 1/4
New Holland 973/73C Center Skid Shoe - 35" x 24" - Black - 1/4" - Predrilled.
POLY, SILVER, END SHOE, 5.5 X 23.625 X 3/4
AGCO 9255, LH and RH end shoe (A) - 5.5 X 23.625 - Silver - 3/4" - Predrilled. Note: Will only fit Serial Numbers prior to HHD01101.
POLY, SILVER, SHOE, 10.375 X 35.625 X 1/4
AGCO 9255 skid shoe (F) - 10.375 X 35.625 - Silver - 1/4" - Predrilled. Note: Will only fit Serial Numbers prior to HHD01101.
POLY, SILVER, SHOE, 10.375 X 35.625 X 1/4
AGCO 9255 skid shoe (B) - 10.375 X 35.625 - Silver - 1/4" - Predrilled. Note: Will only fit Serial Numbers prior to HHD01101.
POLY, SILVER, SHOE, 10.5 X 11.625 X 1/4
AGCO 9255 standard skid shoe - 10.5 X 11.625 - Silver - 1/4" - Predrilled.
POLY, SILVER, SHOE, 10.5 X 17.5 X 1/4
AGCO 9255 standard skid shoe - 10.5 X 17.5 - Silver - 1/4" - Predrilled.
POLY, SILVER, SHOE, 11.75 X 29 X 1/4
AGCO 9255 standard skid shoe - 11.75 X 29 x 1/4" - Pre-Drilled.
POLY, WHITE, CIH, MACDON, NH, LEFT END SHOE, 11 X 15 X 3/8
Case-IH 2162/2152/2142; MacDon FD75/D70/D60/D50; New Holland 86C/83C/82C- Left End Skid Shoe - 11"x15" - 3/8" Thick - Predrilled.
POLY, WHITE, CIH, MACDON, NH, CENTER SHOE, 14 X 16 X 3/8
Case-IH 2162/2152/2142; MacDon FD70/D60/D50; New Holland 86C/83C/82C- Center Skid Shoe - 14"x16" - 3/8" Thick - Predrilled.
POLY, WHITE, CIH, MACDON, NH, CENTER SHOE, 7 X 19 X 1/4
Case-IH 2162/2152/2142; MacDon FD75/FD70/D60/D50; New Holland 86C/83C/82C- Center Skid Shoe - 7"x19" - 1/4" Thick - Predrilled.
POLY, WHITE, CIH, MACDON, NH, DRAPER SKID PLATE, 35-3/16 X 76-5/8 X 1/4
Case-IH 2162/2152/2142; MacDon FD70/D60/D50; New Holland 86C/83C/82C Replacement Draper Skid Plate- 35-3/16""x76-5/8" - 1/4" Thick - Predrilled. Not included in kits. Please order separately.
POLY, WHITE, CIH, MACDON, NH, RIGHT END SHOE, 11 X 15 X 3/8
Case-IH 2162/2152/2142; MacDon FD75/FD70/D60/D50; New Holland 86C/83C/82C- Right End Skid Shoe - 11"x15" - 3/8" Thick - Predrilled.
POLY, YELLOW, DRAPER SKID PLATE, 31 X 63.5 X 1/4
John Deere 600FD Replacement Draper Skid Plate - 31" x 63.5" - Yellow - 1/4" - Predrilled. Will fit 2015 and prior platforms. Not included in kits. Please order separately.
POLY, YELLOW, DRAPER SKID PLATE, 31 X 72.75 X 1/4
John Deere 600FD Replacement Draper Skid Plate - 31" x 72.75" - Yellow - 1/4" - Predrilled. Will fit 2016 and newer platforms after serial number 785000. Not included in kits. Please order separately.
POP MAX PLATE, WITH "C" INSERT, SUNFLOWER
The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeble inserts let you make adjustments for varying seed sizes and shapes.
Available for easy installation of the Poly Skid Shoes.
PPS BUSHING, JD CWB SPRING HOLE
Hardened steel bushing to repair the hole where the spring hooks to the cast closing wheel arm stop/support. It can be welded in or installed with Loctite 638. Will fit John Deere MaxEmerge Plus, MaxEmerge XP, Pro-Series XP, MaxEmerge 5, ExactEmerge planters; 1530, 1535 drills. Requires reamer package PPS688178.
PPS CYLINDER BRACKET, CIH 1200 W/ SUREFORCE
Upper cylinder bracket for Ag Leader SureForce. It is required is they are adding Ag Leader SureForce and buying Case-IH arms at the same time.
PPS HARDWARE, CIH 1200 W/ SUREFORCE
Hardware to install cylinder bracket and hydraulic valve mount on Ag Leader SureForce
PPS HYDRAULIC VALVE MOUNT, CIH 1200 W/ SUREFORCE
Hydraulic valve mount for Ag Leader SureForce
PPS KIT, 14" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16
14" premium flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16", PBO
14" no ream flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 14" PARALLEL ARM, CIH 1200, DELTA FORCE, 1-1/16", PBO
14" premium flange bushing rebuild kit for Case-IH 1200 series with DeltaForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 1200, W/ SUREFORCE, 1-1/16, PBO
14" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO
14" premium flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
14" no ream flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBI
16" no ream flange bushing rebuild kit for John Deere 17X5 or DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBO
16" no ream flange bushing rebuild kit for John Deere 17X5 or DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBI
16" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBO
16" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBI
16" no ream flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBO
16" no ream flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBI
16" premium flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBO
16" premium flange bushing rebuild kit forJohn Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7000, 1-1/16
16" premium flange bushing rebuild kit for John Deere 7000, 7100 (MaxEmerge). Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBI
16" no ream flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB Series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBO
16" no ream flange bushing rebuild kit for John Deere poly box 1700, DB series; MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5. Includes parallel arms with flange bushings installed. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBI
16" premium flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB Series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBO
16" premium flange bushing rebuild kit for John Deere 1700 or DB series with MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7200, POLY BOX PLANTER, 1/4" SUPPORT PLATE, 1-1/8, PBI, NSB
16" no ream flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB Series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, PUSH ROWS, 1-1/16"
16" premium flange bushing rebuild kit for Kinze 200 series split row "push unit". Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, PUSH ROWS, 1-1/16", NSB
16" no ream flange bushing rebuild kit for Kinze 2000 series split row "push unit". Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, REAR ROWS, 1-1/16", PBO
16" premium flange bushing rebuild kit for Kinze 2000 series standard row "pull unit", 1989 & newer. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, REAR ROWS, 1-1/16, NSB
16" no ream flange bushing rebuild kit for Kinze 2000 series standard row "pull unit", 1989 & newer. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, REAR ROWS, WITH DELTA FORCE, 1-1/16, PBO
16" premium flange bushing rebuild kit for Kinze 2000 series standard row "pull unit", 1989 & newer with DeltaForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, 1-1/16", PBO
16" premium flange bushing rebuild kit for Kinze 3000 series split row "push unit". Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series split row "push unit". Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, WITH DELTA FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series split row "push unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, WITH DELTA FORCE, 1-1/16, PBO
16" premium flange bushing rebuild kit for Kinze 3000 series split row "push unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, 1-1/16"
16" premium flange bushing rebuild kit for Kinze 3000 series standard row "pull unit". Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series standard row "pull unit". Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, WITH DELTA FORCE, 1-1/16
16" premium flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, WITH SURE FORCE
16" premium flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, WITH SURE FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, WITH SURE FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series split row "push unit" with SureForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, WITH SURE FORCE, 1-1/16, PBO
16" premium flange bushing rebuild kit for Kinze 3000 series split row "push unit" with SureForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, PP, 1-1/16, NSB
16" no ream flange bushing rebuild kit for Precision Planting ready row units; box & mini hopper. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, PP, 1-1/16, PBO
16" premium flange bushing rebuild kit for Precision Planting ready row units; box & mini hopper. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, WHITE 6000, 8000, 1-1/16"
16" premium flange bushing rebuild kit for White 6000 and 8000 series. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, WHITE 8000, 1-1/16", NSB
16" no ream flange bushing rebuild kit for White 6000 and 8000 series. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 BOX PLANTER, WHITE 9000 VE, 1-1/16
16" premium flange bushing rebuild kit for White 9000 series Vacuum Electric (VE/VER); White 9000 box planters. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 BOX PLANTER, WHITE 9000 VE; 1-1/16", NSB
16" no ream flange bushing rebuild kit for White 9000 series Vacuum Electric (VE/VER); White 9000 box planters. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 MINI HOPPER, 1-1/16", NSB, PBO
16" no ream flange bushing rebuild kit for White 9000 series mini hopper. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 MINI HOPPER, 1-1/16", PBO
16" premium flange bushing rebuild kit for White 9000 series mini hopper. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 20" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16, PBO
20" premium flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 20" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16, PBO
20" no ream flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 20" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO
20" premium flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 20" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO
20" no ream flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBI
23" no ream flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBO
23" no ream flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBI
23" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBO
23" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBI
23" no ream flange bushing rebuild kit forJohn Deere 1700 or DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBO
23" no ream flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBI
23" premium flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBO
23" premium flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBI
23" no ream flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units with POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBO
23" no ream flange bushing rebuild kit for John Deere 1700 and DB series with MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units with POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBI
23" premium flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBO
23" premium flange bushing rebuild kit for John Deere 1700, DB Series with MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed box. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 24" PARALLEL ARM, CIH W/ SUREFORCE, 1-1/16, PBO
24" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 24" UPPER PARALLEL ARM, CIH 1200, W/ SUREFORCE, 1-1/16", PBO
24" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 24" UPPER PARALLEL ARM, CIH 1200, W/ SUREFORCE, 1-1/16", PBO
24" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, CIH 1200 W/ DELTAFORCE, 1-1/16
Flange bushing 1-1/16” rebuild kit for Case-IH 1200 series with DeltaForce to "rebuild your own" parallel arms. Will require the lower holes in the support plate and row unit to be reamed. Requires reamer package PPS688120. For planters with excessive wear on parallel arms, the 1-1/8” kit (PPK012121) is recommended.
PPS KIT, CIH 1200 W/ DELTAFORCE, 1-1/8
Flange bushing 1-1/8” rebuild kit for Case-IH 1200 series with DeltaForce to "rebuild your own" parallel arms. Will require the lower holes in the support plate and row unit to be reamed. Requires reamer package PPS688121. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/16
Parallel Linkage Flange Bushing Rebuild Kit, 1-1/16" repair for Case-IH 800, 900, 955, 1200, 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580. Requires reamer package 688049. If the holes in the parallel linkage arms are worn more than 1-1/16" then order the 1-1/8" kit.
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/16
Flange bushing 1-1/16” rebuild kit for Case-IH 800, 900, 955, 1200 (without DeltaForce), 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580 to "rebuild your own" parallel arms. Requires reamer package PPS688049. For planters with excessive wear on parallel arms, the 1-1/8” kit (PPK011121) is recommended.
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/8
Parallel Linkage Flange Bushing Rebuild Kit, 1-1/8" repair for Case-IH 800, 900, 955, 1200, 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580. Requires reamer package PPS688050. For planters with excessive wear in parallel arms and 1-1/16" will not fix the oblong hole.
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/8
Flange bushing 1-1/8” rebuild kit for Case-IH 800, 900, 955, 1200 (without DeltaForce), 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580 to "rebuild your own" parallel arms. Requires reamer package PPS688050. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, CLOSING WHEEL BRACKET, JD
John Deere cast closing wheel bracket repair kit. Requires reamer package PPS688111.
PPS KIT, JD 1700, ME5, EE, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere 17X5, DB series; MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Requires reamer package PPS688118. Recommended for newer planters with minimal wear (holes under 1.13")
PPS KIT, JD 1700, ME5, EE, 1-3/16
Flange bushing 1-3/16” rebuild kit for John Deere 17X5, DB series; MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Requires reamer package PPS688316. For newer planters with minimal wear on parallel arms, the 1-1/8” kit (PPK251121) is recommended.
PPS KIT, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere 1700, DB series with mini hopper hooks; MaxEmerge Plus, MaxEmerge XP. Requires reamer package PPS688118. Recommended for newer planters with minimal wear (holes under 1.13").
PPS KIT, JD 1700, WITH MINI HOPPER HOOKS, 1-3/16
Flange bushing 1-3/16” rebuild kit for John Deere 1700, DB series with mini hopper hooks; MaxEmerge Plus, MaxEmerge XP. Requires reamer package PPS688316. For newer planters with minimal wear on parallel arms, the 1-1/8” kit (PPK241121) is recommended.
Flange bushing 1-1/16” rebuild kit for John Deere 7000, 7100 series to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8” kit (PPK211121) is recommended.
Flange bushing 1-1/8” rebuild kit for John Deere 7000, 7100 series. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, JD 7200, 1700 POLY BOX PLANTER, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere poly box 7200, 7300, 1700, DB series; MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5. Requires reamer package PPS688118.. Recommended for newer planters with minimal wear (holes under 1.13")
PPS KIT, JD 7200, 1700 POLY BOX PLANTER, 1-3/16
Flange bushing 1-3/16” rebuild kit for John Deere poly box 7200, 7300, 1700, DB series; MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5. Requires reamer package PPS688316.
PPS KIT, JD 7200, 7300, FIBERGLASS BOX PLANTER, 1-1/8
Flange bushing 1-1/8” rebuild kit for fiberglass box John Deere 7200, 7300 series; MaxEmerge 2. Requires reamer package PPS688118. Recommended for newer planters with minimal wear (holes under 1.13")
PPS KIT, JD 7200, 7300, FIBERGLASS BOX PLANTER, 1-3/16
Flange bushing 1-3/16” rebuild kit for fiberglass box John Deere 7200, 7300 series; MaxEmerge 2. Requires reamer package PPS688316. For newer planters with minimal wear on parallel arms, the 1-1/8” kit (PPK221121) is recommended.
PPS KIT, JD DOWN PRESSURE SUPPORT ARM
John Deere Down Pressure Support Arm Repair Kit. Bushing kit to repair where John Deere part number 55881 is used. Repairs the two top holes that were round. If the lower oblong hole is worn enough, use one of the old upper pins to remove the slack. Requires reamer package PPS688222.
PPS KIT, KINZE 2000 PUSH ROWS, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 2000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK421121) is recommended.
PPS KIT, KINZE 2000 PUSH ROWS, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 2000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
Flange bushing 1-1/16" rebuild kit for Kinze 2000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK411121) is recommended.
Flange bushing 1-1/8” rebuild kit for Kinze 2000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 2000, REAR ROWS, WITH DELTA FORCE, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 2000 series standard row "pull unit" with DeltaForce to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK411121.01) is recommended.
PPS KIT, KINZE 2000, REAR ROWS, WITH DELTA FORCE, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 2000 series standard row "pull unit" with DeltaForce to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 3000 PUSH ROWS, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK441121) is recommended.
PPS KIT, KINZE 3000 PUSH ROWS, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 3000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 3000, REAR ROWS, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK431121) is recommended.
PPS KIT, KINZE 3000, REAR ROWS, 1-1/8
Flange bushing 1-1/8” rebuild kit for Kinze 3000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 3000, REAR ROWS, WITH DELTA FORCE, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series standard row "pull unit" with DeltaForce to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK431121.01) is recommended.
PPS KIT, KINZE 3000, REAR ROWS, WITH DELTA FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, KINZE 3000, REAR ROWS, WITH SURE FORCE, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK431121.02) is recommended.
PPS KIT, KINZE 3000, REAR ROWS, WITH SURE FORCE, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
Flange bushing 1-1/16" rebuild kit for Kinze 4900 series planters to "rebuild your own" parallel arms. Requires reamer package PPS688049. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK452121) is recommended.
Flange bushing 1-1/8” rebuild kit for Kinze 4900 series planters to "rebuild your own" parallel arms. Requires reamer package PPS688050. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, ROW CLEANER, MARTIN, 1-1/16
Flange Bushing Rebuild Kit, 1-1/16" repair for Martin row cleaners. Fits Martin C125, WA1345, WA1360 floating row cleaners or any model using 7/8" OD bushings and 5/8" bolts. Requires reamer package PPS688116. If the holes in the parallel linkage arms are worn more than 1-1/16" then order the 1-1/8" kit.
PPS KIT, ROW CLEANER, MARTIN, 1-1/8
Flange Bushing Rebuild Kit, 1-1/8" repair for Martin row cleaners. Fits Martin C125, WA1345, WA1360 floating row cleaners or any model using 7/8" OD bushings and 5/8" bolts. Requires reamer package PPS688118. For row cleaners with excessive wear in the arms and 1-1/16" will not fix the oblong hole.
PPS KIT, WHITE 5000, 6000, 8000, 1-1/16
Flange bushing 1-1/16" rebuild kit for White 5000, 6000, 8000 series to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK611121) is recommended.
PPS KIT, WHITE 5000, 6000, 8000, 1-1/8
Flange bushing 1-1/8" rebuild kit for White 5000, 6000, 8000 series to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, WHITE 9000 BOX PLANTER, WHITE 9000 VE; PP, 1-1/16
Flange bushing 1-1/16” rebuild kit for Precision Planting ready row unit (box & mini hopper); White 9000 VE (Vacuum Electric) box & mini hopper; White 9000 box planters to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK631121) is recommended.
PPS KIT, WHITE 9000 BOX PLANTER; WHITE 9000 VE; PP, 1-1/8
Flange bushing 1-1/8" rebuild kit for Precision Planting ready row unit (box & mini hopper); White 9000 VE (Vacuum Electric) box & mini hopper; White 9000 box planters to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, WHITE 9000 MINI HOPPER, 1-1/16
Flange bushing 1-1/16" rebuild kit for White 9000 series mini hopper. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK6121121) is recommended.
PPS KIT, WHITE 9000 MINI HOPPER, 1-1/8
Flange bushing 1-1/8" rebuild kit for White 9000 series mini hopper. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
1-1/16" reamer package includes 1-1/16" reamer (PPS680116), 11/16" reamer (PPS681116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
1-1/16" reamer package includes 1-1/16" reamer (PPS680116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100). Will only work with Case-IH and Kinze 4900 series.
1-1/8" reamer package includes 1-1/8" reamer (PPS680118), 11/16" reamer (PPS681116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
1-1/8" reamer package includes 1-1/8" reamer (PPS680118), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100). Will only work with Case-IH and Kinze 4900 series.
1-3/16" reamer package includes 1-3/16" reamer (PPS680136), 11/16" reamer (PPS681116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
11/16" reamer package includes 11/16" reamer (PPS681116) and cutting fluid (PPS699100).
11/16" reamer package includes 11/16" reamer (PPS601116) and cutting fluid (PPS699100).
PPS REAMER PKG, CIH 1200, 1-1/16"
1-1/16" reamer package includes 1-1/16" reamer (PPS680116), 11/16" reamer (PPS601116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
PPS REAMER PKG, CIH 1200, 1-1/8"
1-1/8" reamer package includes 1-1/8" reamer (PPS680118), 11/16" reamer (PPS601116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100). Will only work with Case-IH 1200 with DeltaForce or SureForce.
PPS REAMER PKG, CIH CLOSING WHEEL ARM
1-1/4" Case-IH closing wheel arm reamer package includes 1-1/4" reamer (PPS680114) and cutting fluid (PPS699100).
1-11/16" closing wheel bracket reamer package Includes 1-11/16" reamer (PPS680016), 7/16" drill bit (PPS610716), retaining compound (PPS699101) and cutting fluid (PPS699100).
PPS REAMER PKG, JD CWB SPRING HOLE
11/16" reamer package for John Deere closin11/16" reamer package for John Deere closing wheel bracket spring hole repair. Includes 11/16" reamer (PPS681116), step drill bit (PPS699102), cutting fluid (PPS699100) and retaining compound (PPS699101).
PPS REAMER PKG, JD SUPPORT ARM
1-1/8" John Deere air bag down pressure supprt arm reamer package includes 1-1/8" reamer (PPS688118) and cutting fluid (PPS699100).
PPS UPPER CYLINDER BRACKET, DELTA FORCE
PPS upper cylinder bracket for delta force. Required if purchasing Precision Planting Delta Force and PPS arms at the same time.
PRECISION BRUSH, MAROON, PKG OF 2
Replacement "A" Insert, most field corn and larger popcorn.
Replacement "C" Insert, sunflower, sweet corn and edible beans.
PRECISION METER, GP, 12F, CORN
Precision Finger Pick-Up Meter, will fit Great Plains planters.
PRECISION METER, GP, 12F, SUNFLOWER
Precision Finger Pick-Up Meter, will fit Great Plains planters.
Precision Finger Pick-Up Meter, will fit Great Plains planters.
PRECISION METER, JD 7000, KZ 2000, 12F, POPCORN
Precision Finger Pick-Up Meter for popcorn, fits John Deere 7000 & 7100. Kinze 2000 series.
PRECISION METER, JD 7200, 1700, 12F, POPCORN
Precision Finger Pick-Up Meter for popcorn, fits John Deere planter models 7200, 7300 & 1700 series.
PRECISION METER, JD 7200, 1700, 12F, SUNFLOWER
Precision Finger Pick-Up Meter for sunflowers, fits John Deere planter models 7200, 7300, 1700 series. This is a special meter used to plant #3 and #4 size sunflower seeds. It uses the "C" insert and the sunflower finger set with the brushless blank. The blank is just a filler block with no brush or bristles. For #1 and #2 size sunflower seeds, use the standard corn finger because they are too large for the sunflower finger. In this case, order the standard corn meter and replace the A insert with the C insert and the adjustable brush with the brushless blank.
PRECISION METER, JD 7200, 1700, 6F, PUMPKIN
Precision Finger Pick-Up Meter for pumpkins, fits John Deere 7200, 7300, 1700 series. Pumpkin meters have 6 fingers and the flags are modified into the shape of a pendant. The pumpkin meter has a "C" insert installed which has a unique agitation profile that improves singulation. The pumpkin meter comes with an adjustable brush. For optimum performance, run the pumpkin meter on a Test Stand with the seed you are planting for the proper brush setting. It is recommended that the hole in the "C" insert is modified by enlarging it so there is a larger opening for the seed to exit. Generally, the 6-finger pumpkin meter will plant around 5,000 seeds per acre, which is typical for smaller canning pumpkins. For larger Jack-O-Lantern pumpkins you will need to modify the finger set so it only has 2 fingers. This will reduce the population by one-third.
PRECISION METER, KZ 3000, 12F, POPCORN
Precision Finger Pick-Up Meter for popcorn, fits Kinze planter model 3000 series.
PRECISION METER, KZ 3000, 12F, SUNFLOWER
Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series.
PRECISION METER, KZ 3000, 12F, SWEET CORN
Precision Finger Pick-Up Meter for sweet corn, fits Kinze planter model 3000 series.
PRECISION METER, KZ 3000, 6F, CORN
Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series. Recommended for 15-20" row spacing.
PRECISION METER, KZ 3000, 6F, PUMPKIN
Precision Finger Pick-Up Meter for pumpkins, fits Kinze 3000 series. Pumpkin meters have 6 fingers and the flags are modified into the shape of a pendant. The pumpkin meter has a "C" insert installed which has a unique agitation profile that improves singulation. The pumpkin meter comes with an adjustable brush. For optimum performance, run the pumpkin meter on a Test Stand with the seed you are planting for the proper brush setting. It is recommended that the hole in the "C" insert is modified by enlarging it so there is a larger opening for the seed to exit. Generally, the 6-finger pumpkin meter will plant around 5,000 seeds per acre, which is typical for smaller canning pumpkins. For larger Jack-O-Lantern pumpkins you will need to modify the finger set so it only has 2 fingers. This will reduce the population by one-third.
PRECISION PLANTING TREADER WHEEL, PKG OF 2
Precision Planting 3.5" Wide Treader Wheel Kit. These are packaged per row. Hardware not included.
PRO CHUTE I, YELLOW, 7.5" X 62"
Empty your seed boxes directly into your planter. Seed flows smoothly and quickly when you attach the PRO Chute to your bulk seed box. The funnel system is made of UHMW for durability, wear resistance, and slick properties. In as little as four minutes you can empty your seed box with the PRO Chute II. Quick attach for safe unloading. Our PRO Chute snaps into your seed box in under five seconds, without looking underneath to line up brackets. Never stand underneath a raised box again. There is a full 79" of clearance from the lift to the end of the PRO Chute giving you maximum clearance. Slide Gate controls the seed flow.
PRO CHUTE II, BLUE, 10.5" X 60"
Empty your seed boxes directly into your planter. Seed flows smoothly and quickly when you attach the PRO Chute to your bulk seed box. The funnel system is made of UHMW for durability, wear resistance, and slick properties. In as little as two minutes you can empty your seed box with the PRO Chute II. Quick attach for safe unloading. Our PRO Chute snaps into your seed box in under five seconds, without looking underneath to line up brackets. Never stand underneath a raised box again. There is a full 79" of clearance from the lift to the end of the PRO Chute giving you maximum clearance. Slide Gate controls the seed flow.
Push nut for long center connector that attaches to center adjusting rod.
Our quad processor allows users to plug four cameras or wireless receivers into the quad and only one output to the monitor. With the wired remote you can choose to view all four or each camera on the screen.
Package of 10 Quick Fingers with Level II (6" tine spacing) reels. Will fit AGCO 300, 400, 500, 700, 800; Case-IH 1010, 1020, 2020; Caterpillar 1998 or later; John Deere 900, 600, early 600FD prior to S/N 785000; Massey Ferguson 9700, 9750, 9800, 9850; New Holland 971, 973, 71C, 72C, 73C, 74C.
RASSPE KNOTTER, RS 1450, W/ CAM GEAR
Rasspe RS 1450 heavy density double knotter with cam gear. Will fit Case-IH 8570, 8575, 8576, 8580, 8585, 8590; Challenger 2240, 2250, 2260, 2270, 2270XD, 2290; Fendt 12130, 1270N, 1270S, 1290N, 1290S; Massey Ferguson 2150, 2160, 2170, 2170XD, 2240, 2250, 2260, 2270, 2270XD, 2290; New Holland BB980.
RASSPE KNOTTER, RS 1450, W/O CAM GEAR
Rasspe RS 1450 heavy density double knotter without cam gear. Will fit Case-IH 8570, 8575, 8576, 8580, 8585, 8590; Challenger 2240, 2250, 2260, 2270, 2270XD, 2290; Fendt 12130, 1270N, 1270S, 1290N, 1290S; Massey Ferguson 2150, 2160, 2170, 2170XD, 2240, 2250, 2260, 2270, 2270XD, 2290; New Holland BB980.
RASSPE KNOTTER, RS 6003, W/ CAM GEAR
Rasspe RS 6003 single knotter with cam gear. Will fit AGCO 1841, 7120; Case-IH 8555; Challenger 1842, SB44; Hesston 4655, 4690, 4690S; Massey Ferguson 1841, 1842, 1843N, 1843s, 1844N, 1844S.
RASSPE KNOTTER, RS 6003, W/O CAM GEAR
Rasspe RS 6003 single knotter without cam gear. Will fit AGCO 1841, 7120; Case-IH 8555; Challenger 1842, SB44; Hesston 4655, 4690, 4690S; Massey Ferguson 1841, 1842, 1843N, 1843s, 1844N, 1844S.
1-1/16" reamer for PPS flanged bushing kit.
1-1/8" reamer for PPS flanged bushing kit.
1-11/16" reamer required for flanged bushing closing wheel bracket rebuild kit.
1-3/16" reamer for PPS flanged bushing kit.
11/16" reamer for PPS flanged bushing kit. Available if there isn't enough room between row units to use a full length reamer.
REBOUNDER, 750, 1590, 1690, 1850, 1890, 1990
Rebounder seed deflector for John Deere 750, 1590, 1690, 1850, 1890, 1990 with 9" or 10" press wheel. If running a 10" press wheel, SMS090003 or SMS090004 are required.
Red Rebounder seed deflector for Amity drill.
REBOUNDER, CIH 1200 (2008 & PRIOR)
Rebounder seed deflector for Case-IH 1200 series (2008 & prior).
REBOUNDER, CIH 1200 (2009 & AFTER)
Rebounder seed deflector for Case-IH 1200 series (2009 & after).
REBOUNDER, CIH 1200 CIH 1200 W/ SPEEDTUBE
Rebounder seed deflector for Case-IH 1200 series with speedtube boot.
Rebounder seed deflector for Case-IH 500T drill, left hand.
Rebounder seed deflector for Case-IH 500T drill, right hand.
Rebounder seed deflector for Case-IH 5400 soybean special, 5500 soybean drill. If updating seed boot, refer to SMS810003
REBOUNDER, CIH 800, 900, 950, 955
Rebounder seed deflector for Case-IH 800, 900, 950, 955. If updating seed boot, refer to SMS810003.
Rebounder seed deflector for Crustbuster 3400, 3700, 4000 series drills.
REBOUNDER, CRUSTBUSTER W/ DRY FERTILIZER
Rebounder seed deflector for Crustbuster 3400, 3700, 4000 drills with dry fertilizer.
Rebounder seed deflector for Flexi Coil (FSO) drill, left hand.
Rebounder seed deflector for Flexi Coil (FSO) drill, right hand.
Rebounder seed deflector for Great Plains YP, 3PYP, 25 series with clear-shot seed tubes.
REBOUNDER, GREAT PLAINS, HD, PRECISION DRILL
Rebounder seed deflector for Great Plains 00HD-10HD Heavy Duty and Precision Drills with 15" disc openers.
REBOUNDER, GREAT PLAINS, SOLID STAND DRILL
Rebounder seed deflector for Solid Stand 00, 10, 20, 30, 1510 drills with 13.5" disc openers.
REBOUNDER, HORSCH, BULLSEYE SEED TUBE
Rebounder seed deflector for Horsch Maestro and planters with Precision Planting BullsEye seed tubes.
REBOUNDER, JD 450, 455, 515, 520, 1520, 8300
Rebounder seed deflector for John Deere 450, 455, 515, 520, 1520, 8300 drills.
Rebounder seed deflector for John Deere ExactEmerge row units without pneumatic down pressure.
REBOUNDER, JD EXACTEMERGE W/ PNEUMATIC DOWN PRESSURE
Rebounder seed deflector for John Deere ExactEmerge row units with pneumatic down pressure.
REBOUNDER, JD, KINZE, MONOSEM, WHITE
Rebounder seed deflector for John Deere 7000, 7100, 7200, 7300 1700
; Kinze 2000, 3000 with smaller seed tubes (prior to EdgeVac & seed tubes prior to 2012); Monosem NG Series; White 5000, 6000, 8000
Rebounder seed deflector for Kinze 3000, 4000 series with large seed tubes (EdgeVac & seed tubes 2012 & after).
Rebounder seed deflector for Crustbuster 3400, 3700, 4000 drills with dry fertilizer.
Rebounder seed deflector for Landoll 5500 and newer drills.
Rebounder seed deflector for planters using Precision Planting Quick Attach Bracket.
Rebounder seed deflector for Salford drills.
Rebounder seed deflector for Case-IH SDX drill.
REBOUNDER, STOP KIT, JD 1590, 1690, 1850, 1890, 1990
Stop kit required when running with John Deere 10" press wheel. Will work with John Deere 1590, 1690, 1850, 1890, 1990 drill.
Rebounder seed deflector for Sunflower drills.
Rebounder seed deflector for Tye IV, V, 2000 drills.
Rebounder seed deflector for Tye IV, V, 2000 drills.
Rebounder seed deflector for planters using Precision Planting Universal Bracket.
REBOUNDER, WAVEVISION SEED TUBE
Rebounder seed deflector for planters with Precision Planting Wavevision seed tubes.
Rebounder seed deflector for White 9000 series.
The original garden, “tool” that wipes out weeds with no drift, even on a windy day. This, unique to the industry, Red Weeder puts solution exactly where you want and it will save you money on chemical use. The Red Weeder gives the user more options when it comes to deciding what solution to use when attacking your intrusive plants or weeds. The patented wicking system requires no adjustment by the user and its lightweight design makes using our Red Weeder convenient for all ages.
REEL BUNDLE, LEVEL II, AGCO, CIH, 25'
Consists of 8" diameter center tube and 6 bat tubes with tines attached and spaced at 6" apart. Will fit AGCO 400-8000 series, AGCO 8200 and Case-IH 1010 (serial #300001 and later), 1020 (serial #315001 and later) , 25'. Attaching package sold separately.
REEL BUNDLE, LEVEL II, AGCO, CIH, 30'
Consists of 8" diameter center tube and 6 bat tubes with tines attached and spaced at 6" apart. Will fit AGCO 400-8000 series, AGCO 8200 and Case-IH 1010 (serial #300001 and later), 1020 (serial #315001 and later) , 30'. Attaching package sold separately.
REEL BUNDLE, LEVEL II, AGCO/MF 8200, 9250, 35'
Consists of 10" diameter center tube and 6 bat tubes with tines attached and spaced at 6" apart. Will fit AGCO 8200, 35'. Attaching package sold separately.
REEL BUNDLE, LEVEL II, CAT, CIH, HB, JD, NH, 25'
Consists of 8" diameter center tube and 6 bat tubes with tines attached and spaced at 6" apart. Will fit Caterpillar/Claas rigid head only, Case-IH 3020, Honey Bee, John Deere 600, 900 series and New Holland 740CF, 25'. Attaching package sold separately.
REEL BUNDLE, LEVEL II, CIH, 20'
Consists of 8" diameter center tube and 6 bat tubes with tines attached and spaced at 6" apart. Will fit Case-IH Case-IH 2010, 2020, John Deere 900 series and New Holland 72C, 74C and all other models 1995 and later with fore & aft adjust except 740CF, 25'. Attaching package sold separately.
REEL BUNDLE, LEVEL II, CIH, JD, NH, 30'
Consists of 8" diameter center tube and 6 bat tubes with tines attached and spaced at 6" apart. Will fit Case-IH Case-IH 2010, 2020, John Deere 900 series and New Holland 72C, 74C and all other models 1995 and later with fore & aft adjust except 740CF, 25'. Attaching package sold separately.
RETAINER, ROCK GUARD, SMART-TILL
RG KIT, AGCO SERIES 3, EARLY 300 24'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 13'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 15'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 16'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 18'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 20'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 22'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 24'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 24'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 25'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO 300, 500, 800 & 8000 30'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 5300, 5400 25' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 5300, 5400 30' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 5300, 5400 35' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 9250, 9255, 9300 25'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 9250, 9255, 9300 30' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 9250, 9255, 9300 35' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 9250, 9255, 9300 35' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, AGCO/MF 9250, 9255, 9300 40' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CIH 3020, NH 740CF, 20'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CIH 3020, NH 740CF, 25'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CIH 3020, NH 740CF, 30'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CIH 3020, NH 740CF, 30' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CIH 3020, NH 740CF, 35'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CIH 3020, NH 740CF, 35' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, CLAAS 40' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, JD FLEX DRAPER 630FD, 30'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, JD FLEX DRAPER 630FD, 30' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, JD FLEX DRAPER 635FD, 35' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, JD FLEX DRAPER 635FD, 35' DD, OVRLP
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, JD FLEX DRAPER 640FD, 740FD, RD40, 40' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, JD FLEX DRAPER 645FD, 745FD, RD45, 45' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, LEXION 40' DD, CENTER DIVIDER
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, MACDON 972 36' W/OEM WIDE SKID SHOES
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, MACDON 974; CIH 2042, 2052, 2062, 30' W/SCH SKID SHOES
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, MACDON FD70,75, 40' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, MACDON FD70,75, 45' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH 972, 973, 73C, 74C; CIH 2020 25' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH FLEX 972, 973 20' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH FLEX 972, 973 24' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH FLEX 972, 973, 73C, 74C 16'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH FLEX 972, 973, 73C, 74C 22'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH FLEX 972, 973, 73C, 74C 30' DD
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
RG KIT, NH FLEX 972, 973, 73C, 74C; CIH 2020 25'
SCH Roller Guide kit, including spacer plates, top and bottom rollers. Roller guide kits only fit SCH Easycut knife systems. A new knifeback is recommended to maintain proper tolerances.
ROLL PIN, SPRING, 5/16 X 1-1/2
ROLLER THRUST PLATE, SMART-TILL
ROLLER, ORBIT REEL, ML, LEVEL II
Roller bearing for the Orbit Reel track.
ROW CLEANER, ACCR1345, CIH, RAZOR WHEELS
Compact parallel linkage 45 degree row cleaner with razor wheels and 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separately. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1345, CIH, SPIKED WHEELS
Compact parallel linkage 45 degree row cleaner with standard spiked wheels and 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separately. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1345, CIH, SPIKED WHEELS & STW
Compact parallel linkage 45 degree row cleaner with standard wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1345, RAZOR WHEELS
Compact parallel linkage 45 degree row cleaner with razor wheels and 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separately. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze 2000 series and White 6000, 8000, 9000 series planters.
ROW CLEANER, ACCR1345, RAZOR WHEELS & STW
Compact parallel linkage 45 degree row cleaner with razor wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze and White series planters.
ROW CLEANER, ACCR1345, SPIKED WHEELS
Compact parallel linkage 45 degree row cleaner with standard spiked wheels and 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separately. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze 2000 series and White 6000, 8000, 9000 series planters.
ROW CLEANER, ACCR1345, SPIKED WHEELS & STW
Compact parallel linkage 45 degree row cleaner with standard wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze and White series planters.
ROW CLEANER, ACCR1360, CIH, RAZOR WHEELS
Compact parallel linkage row cleaner with razor wheels with 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separetly. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1360, CIH, RAZOR WHEELS & STW
Compact parallel linkage row cleaner with razor wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1360, CIH, SPIKED WHEELS
Compact parallel linkage row cleaner with standard spiked wheels with 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separetly. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1360, CIH, SPIKED WHEELS & STW
Compact parallel linkage row cleaner with standard wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, ACCR1360, RAZOR WHEELS
Compact parallel linkage row cleaner with razor wheels. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separately. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze 2000 series and White 6000, 8000, 9000 series planters.
ROW CLEANER, ACCR1360, RAZOR WHEELS & STW
Compact parallel linkage row cleaner with razor wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze and White series planters.
ROW CLEANER, ACCR1360, SPIKED WHEELS
Compact parallel linkage row cleaner with standard spiked wheels. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separately. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze 2000 series and White 6000, 8000, 9000 series planters.
ROW CLEANER, ACCR1360, SPIKED WHEELS & STW
Compact parallel linkage row cleaner with standard wheels. Includes mount, treader wheels and mounting bracket for optional Clean Sweep or Smart Clean. Recommend running Clean Sweep or Smart Clean for optimum performance. Will fit Case-IH 2000 series (may require MRT003945), John Deere, Kinze and White series planters.
ROW CLEANER, ACCR1360, W/O WHEELS, CIH
Compact parallel linkage row cleaner with razor wheels with 4-bolt hubs. Includes mount and mounting bracket for optional Clean Sweep or Smart Clean. Treader wheels sold separetly. Recommend running Clean Sweep or Smart Clean for optimum performance. Will ONLY fit Case-IH 800, 900, 1200 series planters.
ROW CLEANER, TWIN ROW, LH, SPIKED WHEELS
Martin LH Twin Row Cleaner with standard spike wheels. Optional side treader wheel or depth blade/filler plate sold separately. Right hand sold separately. Will fit Great Plains, Harvest International, John Deere and Kinze.
ROW CLEANER, TWIN ROW, RH, SPIKED WHEELS
Martin RH Twin Row Cleaner with standard spike wheels. Optional side treader wheel or depth blade/filler plate sold separately. Left hand sold separately. Will fit Great Plains, Harvest International, John Deere and Kinze.
ROW CLEANER, WA1345, RAZOR WHEELS, CIH, W/O NTC
WA1345 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit Case-IH 800, 900, 1200 and 2000 series planters without a no-till coulter.
ROW CLEANER, WA1345, RAZOR WHEELS, HI, JD, KINZE, WHITE, W/O NTC
WA1345 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit Harevst International Laser Pro; John Deere 7000, 7100, 7200, 7300, 1700, DB series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000. Will only work without a no-till coulter.
ROW CLEANER, WA1345, RAZOR WHEELS, HORSCH, W/O NTC
WA1345 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit Horsch row unit without a no-till coulter. Includes air cylinder bracket.
ROW CLEANER, WA1345, SPIKED WHEELS, CIH, W/O NTC
WA1345 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit Case-IH 800, 900, 1200 and 2000 series planters without a no-till coulter.
ROW CLEANER, WA1345, SPIKED WHEELS, HI, JD, KINZE, WHITE, W/O NTC
WA1345 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit Harevst International Laser Pro; John Deere 7000, 7100, 7200, 7300, 1700, DB series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000. Will only work without a no-till coulter.
ROW CLEANER, WA1345, SPIKED WHEELS, HORSCH, W/O NTC
WA1345 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit Horsch row unit without a no-till coulter. Includes air cylinder bracket.
ROW CLEANER, WA1360, RAZOR WHEELS, CIH, W/O NTC
WA1360 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit Case-IH 800, 900, 1200 and 2000 series planters without a no-till coulter.
ROW CLEANER, WA1360, RAZOR WHEELS, HORSCH, W/O NTC
WA1360 floating row cleaner with razor wheels. Optional side treader wheels sold separately. Will fit Horsch row unit without a no-till coulter. Includes air cylinder bracket.
ROW CLEANER, WA1360, SPIKED WHEELS, CIH, W/O NTC
WA1360 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit Case-IH 800, 900, 1200 and 2000 series planters without a no-till coulter.
ROW CLEANER, WA1360, SPIKED WHEELS, HORSCH, W/O NTC
WA1360 floating row cleaner with standard spiked wheels. Optional side treader wheels sold separately. Will fit Horsch row unit without a no-till coulter. Includes air cylinder bracket.
ROW DIVIDER SHIELD, JD 600/700, 20"/22"
Row Divider Shields for John Deere cornheads with 20" and 22" row spacing. Will fit John Deere 606C, 608C, 608FC, 612C, 612FC, 616C, 616FC, 618C, 618FC, 706C, 708C, 708FC, 712C, 712FC, 716C, 716FC, 718C, 718FC. Price is per row. Includes hardware.
ROW DIVIDER SHIELD, JD 600/700, 30"
Row Divider Shields for John Deere cornheads with 30" row spacing. Will fit John Deere 606C, 608C, 608FC, 612C, 612FC, 616C, 616FC, 618C, 618FC, 706C, 708C, 708FC, 712C, 712FC, 716C, 716FC, 718C, 718FC. Price is per row. Includes hardware.
ROW DIVIDER SHIELD, JD C-SERIES, 20"/22"
Row Divider Shields for John Deere cornheads with 20" and 22" row spacing. Will fit John Deere C-Series including C6R, C8R, C12R, C12F, C16R, C16F, C18R and C18F. Price is per row. Includes hardware.
ROW DIVIDER SHIELD, JD C-SERIES, 30"
Row Divider Shields for John Deere cornheads with 30" row spacing. Will fit John Deere C-Series including C6R, C8R, C12R, C12F, C16R, C16F, C18R and C18F. Price is per row. Includes hardware.
RUBBER BOOT, PRECISION METER, JD 7200, 1700
RUBBER BUSHNG, SCH KNFHD K97-98
Knifehead bushing for Case-IH and New Holland.
4 x 12 chevron rubber press wheel. Compatible with 2nd stage closer.
6 x 12 chevron rubber press wheel. Compatible with 2nd stage closer.
SCH 12MM 2-PT GUARD (SHORT II), BOTTOM CUT
SCH EasyCut II short 12mm bottom cut 2-point guard. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 2-PT GUARD, (EC I) BOTTOM CUT, ROUND
SCH Easy Cut I 12mm 2-point guard with round holes. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 2-PT HEAD GUARD (EC I) ROUND
SCH Easy Cut I 12mm 2-point head guard with round holes. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 3-PT GUARD, (EC I) ROUND
SCH EasyCut I 12mm 3-point guard with round holes. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 3-PT GUARD, (EC I) SQUARE
SCH EasyCut I 12mm 3-point guard with square holes. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 3-PT HEAD GUARD, (EC I) ROUND
SCH Easy Cut I 12mm 3-point head guard with round holes. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 12MM 3-PT HEAD GUARD, (EC I) SQUARE
SCH Easy Cut I 12mm 3-point head guard with square holes. The 12mm guards are black in color, with a 2 stamped on the bottom.
SCH 14MM 2-PT GUARD, (EC I) ROUND
SCH Easy Cut I 14mm 2-point guard with round holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM 2-PT GUARD, (EC I) SQUARE
SCH Easy Cut I 14mm 2-point guard with square holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM 2-PT HEAD GUARD, (EC I) ROUND
SCH Easy Cut I 14mm 2-point head guard with round holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM 3-PT GUARD (EC I) ROUND
SCH EasyCut I 14mm 3-point guard with round holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM 3-PT GUARD (EC I) SQUARE
SCH EasyCut I 14mm 3-point guard with square holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM 3-PT HEAD GUARD (EC I) ROUND
SCH Easy Cut I 14mm 3-point head guard with round holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM OPEN TOP (LONG II), BOTTOM CUT
SCH EasyCut II long 14mm 2-point open top bottom cut guard. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM OPEN TOP (STD II), BOTTOM CUT
Fits SCH EasyCut systems installed on AGCO-Gleaner, Series I & II. CaseIH, 810, 1010 & 2020. Hart-Carter. Love Bars. New Holland 970, 972, 973 & 74C. Massey Ferguson, Floating, & 9100 Flex. Also used on many brands of Mower Conditioners and Sickle bar mowers. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 14MM OPEN TOP GUARD, (EC I) ROUND
SCH Easy Cut I 14mm 2-point open top guard with round holes. The 14mm guards are burnt orange in color, with a 4 stamped on the bottom.
SCH 17MM 2-PT GUARD (LONG II), BOTTOM CUT
SCH EasyCut II short 17mm bottom cut 2-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM 2-PT HEAD GUARD (SHORT II)
SCH EasyCut II short 17mm 2-point head guard. Only used on Case-IH 1020 platforms. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM 2-PT HEAD GUARD (STD II)
Fits SCH EasyCut systems installed on CaseIH 1020 headers only. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM 3-PT GUARD (SHORT II), BOTTOM CUT
SCH EasyCut II short 17mm bottom cut 3-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM 3-PT GUARD, (EC I) ROUND
SCH EasyCut I 17mm 3-point guard with round holes. The 17mm guards are gray in color, with a 7 stamped on the bottom.
SCH 17MM 3-PT GUARD, (EC I), BOTTOM CUT, ROUND
SCH EasyCut I 17mm 3-point guard with round holes. The 17mm guards are gray in color, with a 7 stamped on the bottom.
SCH 17MM CENTER GUARD, (EC I) ROUND
SCH Easy Cut I 17mm 2-point center guard with round holes. The 17mm guards are gray in color, with a 7 stamped on the bottom.
SCH 17MM OPEN TOP (LONG II), HESSTON CUT
SCH EasyCut II short 17mm Hesston cut 2-point guard. The 17mm guards are light gray in color, with a 7 stamped on the bottom.
SCH 17MM OPEN TOP GUARD, (EC I) ROUND
SCH Easy Cut I 17mm 2-point open top guard with round holes. The 17mm guards are gray in color, with a 7 stamped on the bottom.
SCH 6-BOLT HUB, NON-MODULAR DRIVE
SCH BEARING BLOCK, 17MM, 85V, 85H, 130V, 130H; GREASEABLE
Bearing block assembly for SCH Pro-Drive 85V, 85H, 130V and 130H. Bearing is greaseable.
SCH BEARING BLOCK, 17MM, 85V, 85H, 130V, 130H; SEALED BEARING
Bearing block assembly for SCH Pro-Drive 85V, 85H, 130V and 130H. Bearing is sealed and non-greaseable.
SCH BEARING BLOCK, 27MM, AGCO/MF 7200, 8200, 9250, 9255, 9300; CLAAS; JD 600, 900D; GREASEABLE
Bearing block assembly for Claas Maxi Flex; John Deere 600 series flex platforms, 600 series rigid platforms, 600 series draper platforms; John Deere 925D, 930D and 936D draper platforms. Replaces John Deere #DE19373. Bearing is greaseable.
SCH BEARING BLOCK, 27MM, AGCO/MF 7200, 8200, 9250, 9255, 9300; CLAAS; JD 600, 900D; SEALED BEARING
Bearing block assembly for AGCOMF 7200, 8200, 9250; John Deere early 925D, 930D, 936D. Replaces AGCO #71416424 and John Deere #DE19373. Bearing is sealed and non-greaseable.
SCH CROPLIFTER, AS-100/2, YELLOW
The SCH AS-100/2 will fit John Deere 4" OEM Long guards H213405 and H229539 that are installed on John Deere 600 series rigid and draper. Will also work on 900 series draper platforms. SCH spool fastener, SCP010658, is required to install croplifters.
SCH CROPLIFTER, AS-100/5, GRAY
The SCH AS-100 croplifter will fit John Deere guards series auger platforms with OEM guards H113571, H145791, H153719 and H171031. SCH spool fastener, SCP010658, is required to install croplifters.
SCH CROPLIFTER, ASK-120, BLACK
The SCH ASK-120 croplifter will fit guards that are 6.1 - 6.4" long from bolt hole to tip. May fit some Case-IH & MD960 guards. Will NOT fit Case-IH #1307299C2, 87442324 or 613838R3 guards. SCH spool fastener, SCP010658, is required to install croplifters. The ASK croplifter because the gently curved bottom runner takes the pressure off the riveting at the mounting module. The new slim Profile prevents the reel tines getting caught when reversing.
The SCH ASK-121 croplifter will fit guards that are 5.75" - 6.125" long from bolt hole to tip. Will fit Case-IH and MacDon OEM guards. SCH spool fastener, SCP010658, is required to install croplifters. The new standard crop lifter ASK lasts longer because the gently curved bottom runner takes the pressure off the riveting at the mounting module. The new slim Profile prevents the reel tines getting caught when reversing.
The SCH ASK-127 croplifter will fit guards that are 6.5 - 6.7" long from bolt hole to tip. Will fit MacDon OEM guards and will also fit Case-IH #1307299C2, 87442324 and 613838R3 guards. SCH spool fastener, SCP010658, is required to install croplifters. The new standard crop lifter ASK lasts longers because the gently curved bottom runner takes the pressure off the riveting at the mounting module. The new slim Profile prevents the reel tines getting caught when reversing.
The SCH ASL-100 croplifter will fit guards that are 5.7 - 6.0" long from bolt hole to tip. Will also fit SCH EasyCut I and II guards. SCH spool fastener, SCP010658, is required to install croplifters. The ASK croplifter lasts longer because the gently curved bottom runner takes the pressure off the riveting at the mounting module. The new slim Profile prevents the reel tines getting caught when reversing.
Insert for SCH connector kits.
Insert for SCH knifeheads.
SCH KIT, AGCO 300, 500, 800 & 8000 13'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 13' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 15'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 16'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 16'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 16' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 18'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 20'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 22'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 24'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 25'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 300, 500, 800 & 8000 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. Please specify which knifehead required, 3/4 inch tie rod or 7/8 inch tie rod.
SCH KIT, AGCO 5100 36' DRAPER (FACTORY P/D)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO 5100, 5200 36' DRAPER (FACTORY P/D) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO H/C 10' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 10' P/D 2PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 12' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 12' P/D 1PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 12' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 13' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 13' P/D 1PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 13' P/D 1PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 13' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 13' P/D 2PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 14' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 14' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 14' P/D 2PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 15' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 15' P/D 1PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 15' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 15' P/D 2PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, AGCO H/C 16' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 16' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 18' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 18' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 20' P/D 1PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 20' P/D 2PC HEAD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, AGCO H/C 20' P/D 2PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 12' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 13' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 16' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO H/C-2 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO H/C-2 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO H/C-2 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO RIGID 300/700 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO RIGID 300/700 27'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO RIGID 300/700 27' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO RIGID 300/700 27' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO RIGID 300/700 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO RIGID 300/700 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 12'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 13'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 13' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 15'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 16'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 16' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 18'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 20'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 22'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO SERIES 3, EARLY 300 24'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO SERIES 3, EARLY 300 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO/HESSTON 5100, 5200 30' DRAPER (FACTORY P/D)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO/HESSTON 5100, 5200 30' DRAPER (FACTORY P/D) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, AGCO/MF 5300, 5400 DRAPER 25' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, AGCO/MF 5300, 5400 DRAPER 30' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, AGCO/MF 5300, 5400 DRAPER 35' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, AGCO/MF 8200, FHB 20'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO/MF 8200, FHB 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, AGCO/MF 8200, FHB 25'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO/MF 8200, FHB 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, AGCO/MF 8200, FHB 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO/MF 8200, FHB 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, AGCO/MF 8200, FHB 35'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, AGCO/MF 8200, FHB 35' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, AGCO/MF 9250, 9255, 9300 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, AGCO/MF 9250, 9255, 9300 30' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, AGCO/MF 9250, 9255, 9300 35' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, AGCO/MF 9250, 9255, 9300 40' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CATERPILLAR 25' (5/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CATERPILLAR 25' (5/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CATERPILLAR 30' (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CATERPILLAR 30' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CATERPILLAR 30' (5/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CATERPILLAR, CLAAS F900, LEXION F530 30' (5/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 16.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 17.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 22.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 1020 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH 2020 25' (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301.
SCH KIT, CIH 2020 25' DD (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301.
SCH KIT, CIH 2020 25' DD W/ROLLERS (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301.
SCH KIT, CIH 2020 25' W/ROLLERS (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301.
SCH KIT, CIH 2020 30' DD (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301. NOTE: This is a double drive kit.
SCH KIT, CIH 2020 30' DD W/ROLLERS (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301. NOTE: This is a double drive kit.
SCH KIT, CIH 2020 35' DD (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301. NOTE: This is a double drive kit.
SCH KIT, CIH 2020 35' DD W/ROLLERS (All serial #'s "HAJ" and up to CBJ021301)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This SCH kit will fit all serial numbers "HAJ" and up to CBJ021301. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This SCH kit will fit serial numbers CBJ021301 and after.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit. This SCH kit will fit serial numbers CBJ021301 and after.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit. This SCH kit will fit serial numbers CBJ021301 and after.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This SCH Kit is available for combines 2007 and newer. This SCH kit will fit serial numbers CBJ021301 and after.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards.This SCH kit will fit serial numbers CBJ021301 and after. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This SCH kit will fit serial numbers CBJ021301 and after. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This SCH kit will fit serial numbers CBJ021301 and after. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This SCH kit will fit serial numbers CBJ021301 and after. NOTE: This is a double drive kit.
SCH KIT, CIH 2042, 2052, 2062; NH 84C, 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 2042, 2052, 2062; NH 84C, 36' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, CIH 2042, 2052, 2062; NH 84C, 36', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, CIH 2142, 2062; NH 84C, 30' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, CIH 3020, NH 740CF, 20'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 3020, NH 740CF, 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH 3020, NH 740CF, 25'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 3020, NH 740CF, 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH 3020, NH 740CF, 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 3020, NH 740CF, 30' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CIH 3020, NH 740CF, 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH 3020, NH 740CF, 35'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 3020, NH 740CF, 35' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, CIH 3020, NH 740CF, 35' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CIH 3020, NH 740CF, 35' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 13' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 16.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 17.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 18.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH 820 22.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH 8230 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH 8360 12' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH 8360 12' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH 8370, 8820, 8830 14' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH 8370, 8820, 8830 14' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH 8370, 8820, 8830 14' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH 8370, 8820, 8830 14' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, CIH 8380 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CIH 8820, HESTN 8100 16' DD (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CIH DRAPER 4000 12.5'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH DRAPER 4000 12.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH DRAPER 4000 14' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH DRAPER 4000 16' (W/ROLLERS) (145065)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH DRAPER 4000 20' W/ROLLERS (14681)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH DRAPER 4000 24.5'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH DRAPER 4000 24.5' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH HDX141 14' DD (5/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, CIH HDX141 14' DD (5/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, CIH HDX161 16' DD (5/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, CIH HDX161 16' DD (5/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit has a 5/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, CIH HDX162 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, CIH HDX182 18' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CIH MO-CO 1190 9' (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH MO-CO 1190 9' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH MO-CO 1490,1590 12'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH MO-CO 1490,1590 12' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH MO-CO 1490,1590 14'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH MO-CO 8330, 8340 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH MO-CO 990 9' (3/8"BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH MO-CO 990 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH MO-CO 1190 7' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH MO-CO 1190 9' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH MO-CO 1190 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH MO-CO 8330, 8340 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH RIGID 1010 13' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH RIGID 1010 15' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH RIGID 1010 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH RIGID 1010 15' W/ROLLERS (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH RIGID 1010 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH RIGID 1010 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH RIGID 1010 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, CIH RIGID 1010 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, CIH SC414 14' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH WDRW 4000, 5000 12' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, CIH WDRW 4000, 5000 12' (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH WDRW 5000 12' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH WDRW 5000 14' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH WDRW 5000 14' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, CIH WDRW 8840,8870 14' DD (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CIH WDRW 8840,8870 14' DD (7/16"BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, CIH WDRW 8840,8870 16' DD (7/16"BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit
SCH KIT, CIH WDRW 8840,8870 16' DD W/ROLLERS,7/16" BB
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, CLAAS F900, LEXION F530 30' (1/4" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN 1010 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, HESTN 1070, 1071 7' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1070, 1071 7' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1085,1090,1091,1095, 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN 1085,1090,1091,1095, 9' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, HESTN 1085,1090,1091,1095, 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN 1085,1090,1091,1095, 9' (7/16" BB) W/ ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN 1110 7' (3/8" BB)(14530)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1110, 1070, 1071 7' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1120 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN 1150 12' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, HESTN 1160,8200 12' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 12' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 12' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 12' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 12' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 14' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 14' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 14' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1160,8200 14' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, HESTN 1170 16' DD W/ROLLERS (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, HESTN 1260 M/C 12' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 1265 HYDRA SWING M/C 14'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, HESTN 1660 14' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN 8400,9125, 14' DD (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, HESTN 8400,9125, 14' DD (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN 8400,9125, 14' DD (7/16"BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, HESTN 8400,9125, 16' DD (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, HESTN 8400,9125, 16' DD (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, HESTN 8400,9125, 16' DD (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, HESTN 8400,9125, 16' DD (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, HESTN 8400,9125, 18' DD (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN PT10 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HESTN PT12 12' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN PT12 12' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, HESTN PT7 7' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, HONEY BEE 36' DD (3/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, JD 1209,1219 9' (3/8" BB) (BEAR KNFHD) W/ROLLERS (145038)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, JD 1209,1219 9' (3/8" BB) (BUSH KNFHD) (145038)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD 1209,1219 9' (3/8" BB) (BUSH KNFHD) W/ROLLERS (145038)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear
SCH KIT, JD 1209,1219 9' (3/8" BB) (BEAR KNFHD) (145038)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD 1600 12' DD (BEAR KNFHD)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD 1600 12' DD (BEAR KNFHD) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD 1600 14' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD 1600 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD 250,350,450 7' (1/2" BB) (BEAR KNFHD) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 7' (1/2" BB) BEAR KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 7' (3/8" BB) BUSH KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 7' (7/16" BB) (BEAR KNFHD) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 7' (7/16" BB) BEAR KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 7' (7/16" BB) BUSH KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (1/2" BB) BEAR KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (1/2" BB) BEAR KNFHD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (3/8" BB) BEAR KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (3/8" BB) BEAR KNFHD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (7/16" BB) BEAR KNFHD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (7/16" BB) BEAR KNFHD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (7/16" BB) BUSH HD(17638)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 250,350,450 9' (7/16" BB) BUSH KNFHD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your machine before ordering.
SCH KIT, JD 890,895 14' DD (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD 890,895 16' (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD 890,895 16' DD (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD 890,895 16' DD (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD 890,895 16' DD (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD 890,895 18' DD (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD 890,895 18' DD (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD DRAPER 925D 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD DRAPER 930D 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD DRAPER 936D 36' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 213 13' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 215 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 216 16' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 218, 918 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 220, 920 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 222, 922 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD FLEX 224 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 618 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD FLEX 620F 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 622F 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 625 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 635 35' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 915 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 924 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 925 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX 930 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD FLEX AUGER 620F 20'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX AUGER 630F 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX AUGER 630F 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD FLEX DRAPER 630FD 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD FLEX DRAPER 630FD, 730FD 30' DD W/ROLLERS, CENTER DIVIDER
This is a complete SCH EASYThis is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 630FD, 730FD 30' DD, OVRLP
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 630FD, 730FD 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD FLEX DRAPER 635FD 35' DD, OVRLP
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 635FD, 735FD, RD35, 35' DD W/ROLLERS, CENTER DIVIDER
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 640FD, 740FD, RD40, 40' DD W/ROLLERS, CENTER DIVIDER
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 640FD, 740FD, RD40, 40' DD, CENTER DIVIDER
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 645FD, 745FD, RD45 45' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, JD FLEX DRAPER 645FD, 745FD, RD45, 45' DD W/ROLLERS, CENTER DIVIDER
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, JD H/C 13' P/D 2PC HEAD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD RIGID 218,918 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD RIGID 220, 920 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD RIGID 222, 922 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD RIGID 224 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, JD RIGID 230 & 930 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, JD RIGID 925 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, LEXION F30 30' (5/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, LEXION F535 35' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, LEXION F540 40' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 15' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 21' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 21' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 25' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MACDON 972 30' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, MACDON 972 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MACDON 972 36' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MACDON 972 36' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 973 25' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 973 25', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MACDON 973 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MACDON 973 36' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 973 39' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid plates with the SCH Skid Plates, SCP082817, which must be ordered separately. Skid plates are required for model year 2006 and after.
SCH KIT, MACDON 974 30' W/ROLLER, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 974 30', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 974 35', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 974 36' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON 974 36', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON D60; CIH 2142, 2152, 2162; 30' DD W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifeheads, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after. NOTE: This is a double drive kit.
SCH KIT, MACDON D60; CIH 2142, 2152, 25' DD W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after. NOTE: This is a double drive kit.
SCH KIT, MACDON FD125, 25' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON FD70, FD75; FD130; D60; D65; CIH 2142, 2152, 2162; 30', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 35' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 35', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 40' DD W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifeheads, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after. NOTE: This is a double drive kit.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 40' DD, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifeheads, all guards and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after. NOTE: This is a double drive kit.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 40' W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 40', REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifehead, all guards and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 45' DD W/ROLLERS, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifeheads, all guards and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after. NOTE: This is a double drive kit.
SCH KIT, MACDON FD70,75; CIH 2142, 2152, 2162; 45' DD, REQUIRES SCH SKID SHOES
This is a complete SCH EASYCUT cutter bar kit, including pre-assembled knife assembly, knifeheads, all guards and hardware, plus ten extra knife sections and two extra guards. NOTE: This SCH Kit requires replacing your original skid shoes with SCH skid shoes, SCP082817, which must be ordered separately. SCH skid shoes are required for model year 2006 and after. NOTE: This is a double drive kit.
SCH KIT, MF 655,675,775,785 12'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 655,675,775,785 15'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 655,675,775,785 18'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 655,675,775,785 21'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 9850 20' AGCO MADE
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 9850 20' W/ROLLERS AGCO MADE
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF 9850 25' AGCO MADE
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 9850 25' W/ROLLERS AGCO MADE
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF 9850 30' AGCO MADE
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF 9850 30' W/ROLLERS AGCO MADE
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF CLAAS 8450,8460 15'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF CLAAS 8450,8460 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF CLAAS 8450,8460 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF CLAAS 8450,8460 20'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF CLAAS 8450,8460 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF CLAAS 8450,8460 25'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF CLAAS 8450,8460 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF CLAAS RIGID 8460 30'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF CLAAS RIGID 8460 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF DRAPER 220 25' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, MF DRAPER 220 30' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
SCH KIT, MF MO-CO 725 7' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF MO-CO 725, 925 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
SCH KIT, MF MO-CO 81 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. This kit does not include the knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include the knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 8920 16' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 8920 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9300 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9300 20' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9300 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9300 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 18' ROTARY
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 18' ROTARY W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF WHITE 9750 20' ROTARY
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 20' ROTARY W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF WHITE 9750 22' ROTARY
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 24' ROTARY
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 24' ROTARY W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF WHITE 9750 25' ROTARY
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 25' ROTARY W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF WHITE 9750 30' ROTARY
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, MF WHITE 9750 30' ROTARY W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, MF WHT 8560,9520 18' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, MF WHT 8560,9520 18' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, MF WHT 8560,9520 20' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, MF WHT 8560,9520 20' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, MF WHT 8560,9520 24' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, MF WHT 8560,9520 24' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, MF WHT 8560,9520 27' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your kit before ordering.
SCH KIT, NEW IDEA 509 9' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 1118 14' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 1118 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 116, 1114, 1116 14' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 116, 1116 14' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 116, 1116 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH 1465 10' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 1465 9' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include a knifehead.
SCH KIT, NH 1475 16' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS SERIES, 12' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS SERIES, 12' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS SERIES, 14' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS SERIES, 14' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS16, 16' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS16, 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS18, 18' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 1475; 2200,2300,2450,2550, HS18, 18' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH 1495,495 12' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 2326 16' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH 451,456 7' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 7' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 7' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 7' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 7' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 7' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (1/2" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 451,456 9' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH 461,469 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 461,469 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH 474 7' W/ROLLERS (3/8"BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 474,489 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 474,489 9' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH 488,479 10' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH 488,479 9' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH 489, 1465 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 716" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 489, 1465 9' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 490 12' (3/8" BB)(145050)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 492 9' (3/8" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 492 9' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, NH 88C, 36' DD (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
SCH KIT, NH 88C, 36' DD (1/4" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH 92C, 94C, 25' (3/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH 92C, 94C, 30' (1/4" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH 92C, 94C, 36' (3/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH 92C, 94C, 36' DD (3/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing), all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 3/16" backbone. Please measure the backbone of your platform before ordering. NOTE: This is a double drive kit.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH FLEX 972 15' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH FLEX 972, 973 18' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH FLEX 972, 973 22' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973 22' DD W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973 22' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH FLEX 972, 973 24' DD
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973 24' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH FLEX 972, 973, 73C, 74C 16' W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH FLEX 972, 973, 73C, 74C 20' (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH FLEX 972, 973, 73C, 74C 20' DD (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973, 73C, 74C 20' DD W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973, 73C, 74C 20' W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH FLEX 972, 973, 73C, 74C 24' DD W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973, 73C, 74C 25' DD W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973, 73C, 74C 25' W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH FLEX 972, 973, 73C, 74C 30' DD (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973, 73C, 74C 30' DD W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear. NOTE: This is a double drive kit.
SCH KIT, NH FLEX 972, 973, 73C, 74C 30' W/ROLLERS (Before SN# PNL018301 & all HAJ SN#'s)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH MO-CO 472,477,478 7'
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
SCH KIT, NH MO-CO 472,477,478 7' W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. This kit also includes roller guides for less knife friction and wear.
SCH KIT, NH MOWER 405 7' (1/2" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 7' (1/4" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 1/4" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 7' (3/8" BB) (145027)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 7' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 7' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 9' (3/8" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 9' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
SCH KIT, NH MOWER 450,455 9' (7/16" BB) W/ROLLERS
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife, all guards and hardware. This kit also includes roller guides for less knife friction and wear. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering. This kit does not include a knifehead.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. This kit does not include a knifehead.
SCH KIT, NH WDRW 910 12' (7/16" BB)
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 7/16" backbone. Please measure the backbone of your platform before ordering.
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead (less bearing) all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This is a double drive kit. NOTE: This kit has a 3/8" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, VE GREENS HARVESTER 7', 80" CENTERS LH (1/2" BB) (175026) SPECIAL
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KIT, VE GREENS HARVESTER 7', 80" CENTERS RH (1/2" BB) (175026) SPECIAL
This is a complete SCH EASYCUT cutter bar kit, including one pre-assembled knife with knifehead, all guards, and hardware, plus ten extra knife sections and two extra guards. NOTE: This kit has a 1/2" backbone. Please measure the backbone of your platform before ordering.
SCH KNFHD CLAMP, AGCO 5300, 5400, 8200, 9250, 9255, 9300 FHB, 7/8", NYLON RING
SCH left hand knifehead for Case-IH 2142, 2152, 2162 (30' & longer); MacDon D50, D60, D65, FD70 (30' & longer); MacDon D130, D135, D140, D145, FD75, FD130, FD135, FD140, FD145 (all lengths). Includes bearing and seal. Knifehead hardware package, SCP083601, not included.
SCH KNFHD W/ BEARING, JD, MACDON, MO-CO (NEEDLE) LH
Fits SCH EasyCut system installed on John Deere 130, 160, 230, 300, 710, 720, 820, 890, 895, 1207, 1209, 1219, 1380, 1424, 1600, 2280, 2320 and 2420 needle bearing style. Will also fit MacDon 920, LH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD W/ BEARING,CIH 2052, 2062, MACDON 973, 974, NH 84C, RH, 10 DEGREE
Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, AGCO 300-8000, MF, 3/4-16 THREADED BUSHING
Fits SCH EasyCut system installed on AGCO 300, 500, & 800. This knifehead accepts the 3/4 inch tie rod (not included). Will also fit Massey Ferguson 7000 and 9850. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, AGCO 300-8000, MF, 7/8-14 THREADED BUSHING
Fits SCH EasyCut system installed on AGCO 300, 500, 800 & 8000. This knifehead accepts the 7/8 inch tie rod (not included). Will also fit Massey Ferguson 7000 and 9850. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, AGCO 5100,5200; MF 220,5200
Fits SCH EasyCut system installed on AGCO 5100, 5200 and Hesston 5100 and 5200. Will also work on Massey Ferguson 220 and 5200, LH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, AGCO 5300, 5400, 8200, 9250, 9255, 9300 FHB, LH
Fits SCH EasyCut system installed on AGCO 5300, 5400, 8200, 9250, 9255, 9300, Left Hand Knifehead. Knifehead hardware package, SCP083731, not included.
SCH KNFHD, AGCO 5300, 5400, 9250, 9255, 9300 RH
Fits SCH EasyCut system installed on AGCO 5300, 5400, 9250, 9255, 9300, Right Hand Knifehead. Knifehead hardware package, SCP083731, not included.
Fits SCH EasyCut system installed on AGCO, crank arm style, rigid, LH.
SCH KNFHD, AGCO EARLY 300 FLEX
Fits SCH EasyCut system installed on AGCO early style 300. This AGCO platform has a 1/4 inch thick backbone (the piece of steel that the guards bolt to) and no tie rod to adjust register of the knife. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, AGCO H/C-2, CIH 810 COFS 4.25"
Fits SCH EasyCut system installed on AGCO with a Hart Carter wobble box, Case-IH 810 and Claas Hart Carter Series 2 floating cutter bar, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Bearings are not included. Knifehead hardware package, SCP083601, not included.
Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 1490, 1590, NI 509, 5112, 5114
Fits SCH EasyCut system installed on Case-IH 1490 and 1590. Will also work on New Idea 509, 5112 and 5114. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 2020 (-2006) RH (SPECIAL-DO NOT USE)
Fits SCH EasyCut system installed on Case-IH early style 2020, Right Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 2020, NH 74C, LH
Fits SCH EasyCut system installed on Case-IH 2020 (serial number CBJ021301 and after; all YAZL) and New Holland 74C (serial number PNL018301 and after; all Y9ZL), left hand knifehead. Measures 5-5/8" from center of first full section to center of drive bolt. Bearings are not included. Knifehead hardware package (SCP083601) not included.
SCH KNFHD, CIH 2020, NH 74C, RH
Fits SCH EasyCut system installed on Case-IH 2020 (serial number CBJ021301 and after; all YAZL) and New Holland 74C (serial number PNL018301 and after; all Y9ZL), right hand knifehead. Measures 5-5/8" from center of first full section to center of drive bolt. Bearings are not included. Knifehead hardware package (SCP083601) not included.
Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 230, 1190, 4000, 5000
Fits SCH EasyCut system installed on Case-IH 230, 1190, 4000 and 5000. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on Case-IH 810, Left Hand Knifehead. Bearings are not included. Will also fit Case-IH 2020 Flex. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 8370, 8820, 8830, 7/8"-18, LH
Fits SCH EasyCut system installed on Case-IH 8220, 8330, 8340, 8360, 8370, 8820 and 8830. Will also fit Hesston 600, 1120, 1160, 8100 and 8200, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH 8370, 8820, 8830, 7/8"-18, RH
Fits SCH EasyCut system installed on Case-IH 8220, 8330, 8340, 8360, 8370, 8820 and 8830. Will also fit Hesston 600, 1120, 1160, 8100 and 8200, Right Hand Knifehead. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on Case-IH 990. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH HDX; NH 1475,2200,2300,2450,2550, HS SERIES, H7150, LH
Fits SCH EasyCut system installed on New Holland 1475, 2216, 2300, 2450, 2550 and H7150, Left Hand Knifehead. Will also fit Case-IH HDX series. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH HDX; NH 1475;2200,2300,2450,2550, HS SERIES, H7150, RH
Fits SCH EasyCut system installed on New Holland 1475, 2216, 2300, 2450, 2550 and H7150, Right Hand Knifehead. Will also fit Case-IH HDX series. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH, GEHL, HESTN, 7/8"-18 JAM NUT
Fits SCH EasyCut system installed on Case-IH 1275, Gehl 2230, 2650, 2850 and Hesston 320, 420, 1014, 1260, 1265, 6400, 6600 and 6610, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083784, not included.
SCH KNFHD, CIH, HESSTON MO-CO, LH
Fits SCH EasyCut system installed on Case-IH 8360, 8840 and 8870. Will also fit Hesston 1170, 1275, 1660, 8400 and 8450, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, CIH, HESSTON MO-CO, RH
Fits SCH EasyCut system installed on Case-IH 8360, 8840 and 8870. Will also fit Hesston 1170, 1275, 1660, 8400 and 8450, Right Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, HESSTON, 7/8"-18 JAM NUT, LH
Fits SCH EasyCut system installed on Hesston 1014, 1070, 1071, 1150, 6450, 6455, 6550, 6655 and 6665. Will also fit Gehl Mower Conditioner 2130, 2140 and 2160, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, HESSTON, 7/8"-18 JAM NUT, RH
Fits SCH EasyCut system installed on Hesston 1014, 1070, 1071, 1150, 6450, 6455, 6550, 6655 and 6665, Right Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, HESTN, 7/8"-18 JAM NUT
Fits SCH EasyCut system installed on Hesston 600, 1010, PT10 and PT12. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, HONEY BEE 2002-2010; NH 88C, LH
Fits SCH EasyCut system installed on New Holland 94C and Honey Bee 2002 - Current series platforms, LH. Bearings are not included. Knifehead hardware package, SCP083814, not included.
SCH KNFHD, HONEY BEE 2002-2010; NH 88C, RH
Fits SCH EasyCut system installed on Honey Bee 2002 - Current series platforms, Right Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083814, not included.
SCH KNFHD, LEXION F535, F540 LH
Fits SCH EasyCut system installed on Lexion F535 and F540, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, LEXION F535, F540 RH
Fits SCH EasyCut system installed on Lexion F535 and F540, Right Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on MacDon 4000. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, MACDON 920, 942, RH
Fits SCH EasyCut system installed on MacDon 920 and 942, Right Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, MF 655, 675, 775, 785; MACDON PREMIER 1900
Fits SCH EasyCut system installed on Massey Ferguson 655, 675, 775 and 785, Left Hand Knifehead. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on Massey Ferguson 725 and 925. Bearings are not included. Knifehead hardware package, SCP083601, not included.
Fits SCH EasyCut system installed on Massey Ferguson Rotary. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH EasyCut system installed on AGCO Hiniker floating cutter bar, LH.
Fits SCH EasyCut system installed on New Holland 114, LH. Bearings are not included.
Fits SCH EasyCut system installed on New Holland 114, Right Hand Knifehead. Bearings are not included.
SCH KNFHD, NH 116, 912, 1100, 1114, 1116, 1118, LH
Fits SCH EasyCut system installed on New Holland 116, 912, 1100, 1114 and 1118, LH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, NH 116, 912, 1114, 1116, 1118, RH
Fits SCH EasyCut system installed on New Holland 116, 912, 1100, 1114 and 1118, RH. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, NH 461, 467, 469, 490
Fits SCH EasyCut system installed on New Holland 461, 467, 469 and 490. Bearings are not included. Knifehead hardware package, SCP083784, not included.
SCH KNFHD, NH 472, 477, 478, 479, 488
Fits SCH EasyCut system installed on New Holland 472, 477, 478, 479 and 488. Bearings are not included. Knifehead hardware package, SCP083784, not included.
SCH KNFHD, NH 474, 489, 492, 1465
Fits SCH EasyCut system installed on New Holland 474, 489, 492 and 1465. Bearings are not included. Knifehead hardware package, SCP083784, not included.
Fits SCH EasyCut system installed on New Holland 495 and 1495. Bearings are not included. Knifehead hardware package, SCP083601, not included.
SCH KNFHD, OWATONNA, 7/8"-14 JAM NUT
SCH KNFHD, OWATONNA, 7/8"-18 JAM NUT
SCH KNFHD,CIH 2052, 2062, MACDON 973, 974, NH 84C, RH, 10 DEGREE
Bearings are not included. Knifehead hardware package, SCP083601, not included.
Connector bar with 2 extra bolts and 2 extra inserts.
SCH KNIFE CONNECTOR KIT +3 SECT, 7SPI
Connector bar with 3 extra coarse sections, 2 extra bolts and 2 extra inserts.
SCH KNIFEBACK, #1 BAR, 102.25"
SCH KNIFEBACK, #1R BAR, 99.25"
SCH KNIFEBACK, #2 BAR, 100.25"
SCH KNIFEBACK, #2R BAR, 97.25"
SCH KNIFEBACK, #4 BAR, 106.25"
SCH OVERLAP STRAP, DD, (2 SEC)
SCH OVERLAP STRAP, DD, (3 SEC)
3 section overlap strap for SCH double drive system.
SCH Pro-Drive 85H, horizontal, 85mm (3.3") stroke. Includes knifehead bearing block assembly. OEM replacement for MF 5100,5200 windrower draper head.
SCH P/D 85MH; WITH FLYWHEEL, HONEY BEE 4000
SCH Pro-Drive 85H, horizontal, 85mm (3.3") stroke. Includes knifehead bearing block assembly. OEM replacement for MF 5100,5200 windrower draper head.
SCH P/D 85MV, AGCO/MF, 7200, 8200; HARVESTMORE, 27MM
SCH PRO-DriveV, vertical,mm (3.3") stroke. Replaces drive on AGCO and Massey Ferguson 7200, 8200. Includes SCP14230 greaseable 27mm bearing block assembly.
SCH P/D 89V W/O PULLEY, JD 600 FLEX & RIGID
SCH PRO-Drive 89V, vertical, 89mm (3.5") stroke. Replaces a John Deere made 89V Pro-Drive on a 620F, 622F, 625F, 630F and 635F flex platforms & 622R, 625R and 630R rigid platforms. Includes SCP14230 greaseable 27mm bearing block assembly.
SCH P/D 89V W/O PULLEY, JD 900 DRAPER
SCH P/D KNFHD, CIH 1010, 1020, W/CIH 3" KNIFE
Knifehead available for Case-IH flex and rigid platforms. This knifehead is used for Pro-Drives with OEM Cutter Bar.
SCH P/D KNFHD, JD 200, 900 SERIES, W/JD KNIFE
Knifehead available for John Deere flex and rigid platforms. This knifehead is used for Pro-Drives with OEM Cutter Bar.
SCH PARTS PKG, KNFHD, 600F CAST TOP MOUNT
Knifehead parts package for SCP002557 knihead.
SCH PARTS PKG, KNFHD, CLAAS MAXFLEX
Knifehead parts package for SCH knifehead with top strap.
SCH PARTS PKG, KNFHD, W/O TOP STRAP
Knifehead parts package for SCH knifehead without top strap.
SCH PARTS PKG, KNFHD, W/TOP STRAP
Knifehead parts package for SCH knifehead with top strap.
SCH PARTS PKG, KNFHD, W/TOP STRAP, 5300, 5400, 8200, 9250, 9255, 9300
Knifehead parts package for SCH knifehead with top strap.
SCH PRO FLEX HARDWARE KIT, SINGLE
Hardware for (1) SCH Pro Flex Lifter.
SCH PRO FLEX HARDWARE KIT, SINGLE
Hardware for (1) SCH Pro Flex Lifter.
SCH PRO FLEX HARDWARE KIT, SINGLE
Hardware for (1) SCH Pro Flex Lifter.
SCH PRO FLEX HARDWARE KIT, SINGLE
Hardware for (1) SCH Pro Flex Lifter.
SCH bottom roller. Introduced in 2018; bolts on top of one guard with two bolts.
SCH top roller, introduced in 2018; bolts on top of one guard with two bolts.
SCH SECTION BOLTS & NUTS, PKG OF 50
Package of the Bolts and Nuts for knife sections of the SCH knife system, 50 each of the Bolt and Nut.
SCH SECTION, COUNTERSUNK, 11SPI, BOX OF 25
Box of 25 SCH Fine Sections, 11 serrations per inch, for SCH Knife. Fine is recommended for wheat and grasses.
SCH SECTION, COUNTERSUNK, 11SPI, SINGLE
(1) SCH Countersunk Fine Section, 11 serrations per inch, for SCH Knife. Fine is recommended for wheat and grasses.
SCH SECTION, COUNTERSUNK, 7SPI, BOX OF 25
Box of 25 SCH Countersunk Coarse Sections, 7 serrations per inch, for SCH Knife. Coarse is recommended for soybeans and alfalfa.
SCH SECTION, COUNTERSUNK, 7SPI, SINGLE
(1) SCH Countersunk Coarse Section, 7 serrations per inch, for SCH Knife. Coarse is recommended for soybeans and alfalfa.
SCH SKID SHOE, CIH, MACDON DRAPER
Skid Plate for MacDon draper platforms, this skid plate replaces the original MacDon skid plate and fits the SCH guards. The skid plate is six inches wide and has two holes. Required on Macdon 973, 974 FD60, FD70 and FD75 model year 2006 and after. Also reuired on Case-IH 2052, 2062, 2152 and 2162 model year 2006 and after.
SCH 2 hole, 4 mm spacer plate. Brown in color.
SCH 3 hole, 4 mm spacer plate. Brown in color.
SCH 2 hole, 5mm spacer plate. Blue in color.
SCH 3 hole, 5mm spacer plate. Blue in color.
SCH 2 hole, 6mm spacer plate. Black in color.
SCH 3 hole, 6mm spacer plate. Black in color.
SCH SPOOL FASTENER, CROPLIFTER
SCH Spool Fastener. Required to install croplifters to your guards. Must use a 3/8" hex head bolt (not included). A carriage bolt will not work.
The Model 1000 Bumper is specifically designed for all pickup trucks. The 50,000 PSI yield strength tubing makes this the strongest commercial bumper available. The bumper also requires a model specific mounting bracket, stone shield and a hitch to complete. Models are available for Ford, Dodge and GM pickups. This heavy-duty bumper will accommodate our bolt-on type cushion hitches The Model 1000 Bumper with an 850 Cushion Hitch is an ideal application on a 1-1/2 or 2 ton truck. Less hitch height drop. Information needed to order: make of vehicle, model, year, frame width and bed length.
SCHUCK 3-1/2" RT PIN, W/LYNCH PIN
Pin for a receiver tube. Includes keeper pin.
SCHUCK 300 SERIES REPLACEMENT KIT
Includes 3 Polyethane Bearings and 2 Urethane Cushions.
The Model 310 is a designed to weld on to an existing bumper. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.
The Model 320 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.
The Model 340 is a designed to fit 2 inch receiver tubes, includes pin. This hitch can be turned over for a 4 inch difference in tongue height. The 300 Series Cushion hitch is designed for a 750 pound tongue weight and 20,000 pound pulling capacity.
SCHUCK 700 SERIES REPLACEMENT KIT
Includes 5 Polyethane Bearings and 4 Urethane Cushions.
The Model 710 is a designed to weld on to an existing bumper. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
The Model 720 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCHUCK 720 HITCH, DODGE, 1994-2002
The Model 720 is a designed to bolt on to an existing Dodge bumper. For 1994 or newer factory Dodge bumpers with a 8 inch hole pattern. The 700 Series Cushion hitch is designed for a 1,000 pound tongue weight and 40,000 pound pulling capacity.
SCHUCK 800 SERIES REPLACEMENT KIT
Includes 7 Polyethane Bearings and 6 Urethane Cushions.
The Model 810 is a designed to weld on to an existing bumper. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.
The Model 820 is a designed to bolt on to an existing bumper, bolt pattern from 8 to 12 inches on center. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.
The Model 840 is a designed to fit 2 inch receiver tubes, includes pin. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.
The Model 840 is a designed to fit 2-1/2 inch receiver tubes, includes pin. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.
The Model 850 is a designed to bolt on to an existing bumper, bolt pattern from 10.5 to 12 inches on center. This hitch extends 7 inches and will travel side to side 12 inches. The 800 Series Cushion hitch is designed for a 2,000 pound tongue weight and 50,000 pound pulling capacity.
Stainless steel spring. For Series 700 or 800 Series hitches
Reduces class 5 (2-1/2" I.D.) receiver tube to (2" I.D.) receiver tube.
SCRAPER KIT, CIH P-500; NH 2080, 2085, LH
Fits left side of Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills on gauge wheel side. Each kit includes: Complete left scraper assembly & 2 washers.
SCRAPER KIT, CIH P-500; NH 2080, 2085, RH
Fits right side of Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills on gauge wheel side. Each kit includes: Complete right scraper assembly & 2 washers.
SCRAPER KIT, GREAT PLAINS, DRILLS
Outside scraper for Great Plains drills. Kit includes RH and LH tungsten carbide scrapers, and RH & LH mounting arms. Also replaces 404-152 and 404-153 scrapers on a 25 series opener.
Will fit John Deere MaxEmerge 5 and ExactEmerge row units. One-piece design; outside scraper. No modification required.
SCRAPER KIT, KINZE 4000 SERIES
Will fit Kinze 4000 series planters. Two-piece design; outside sraper. No modifications or holes to drill.
SCRAPER KIT, WHITE 9000 SERIES
Will fit White 9000 series planters. Two-piece design; outside scraper. Re-designed arm and it mounts in a new location. Fits White 9000 series only. Will NOT fit the White 6000 and 8000 series.
Seed tube guard, Kinze inner guard scraper, for Kinze 3000 series.
Seal for Case-IH 2162 and MacDon FD70, FD75
Knifehead seal for Case-IH 8380, 8840, 8870; Hesston 1170, 1275, 1660, 8400, 8450, 8840, 8870, 9125. NOTE: Requires TWO per knifehead.
Replacement seal for Martin UMO and Martin row cleaners. Recommend to replace the seals when replacing the UMO springs.
SEED BOX TOPPER, JD 7000, 7100
Fiberglass seed box extension. One piece design. Fits 1.6 bushel planter boxes only. Adds 1 bushel capacity. Watertight fit prevents seed loss during transport. Use original lid - fits tight preventing lid loss. Easy installation. Bolt on.
SEED BOX TOPPER, JD 7200, 7300 (PRE 1993)
Fiberglass seed box extension. One piece design. Fits 1.6 bushel planter boxes only. Adds 1 bushel capacity. Watertight fit prevents seed loss during transport. Use original lid - fits tight preventing lid loss. Easy installation. Bolt on.
SEED BOX TOPPER, KINZE 2000 SERIES
Fiberglass seed box extension. One piece design. Fits 1.6 bushel planter boxes only. Adds 1 bushel capacity. Watertight fit prevents seed loss during transport. Use original lid - fits tight preventing lid loss. Easy installation. Bolt on.
SEED DEFLECTOR KIT, ESET, PKG OF 4
Kit includes 4 replacement liner springs and 4 screws for eSet.
SEED DISK, ESET, FIELD CORN, SUNFLOWER, .176"
Replacement 30-hole eSet seed disk for field corn and confectionary/edible sunflowers.
SEED DISK, ESET, SNAP BEANS, SOYBEAN, .155"
Replacement 60-hole eSet seed disk for snap beans at 100,000 population in 30" rows and narrow row (15"-20") soybeans. Can be used in 30" row soybeans if population is less than 150,000 seeds per acre. Requires purchase of speciality singulator (PPM720386) and speciality extractor (PPM720117).
SEED FIRMER, CIH P-500; NH 2080, 2085; EXAPTA CWB, W/ MOJO WIRE, LH
Seed Firmer, Standard Liquid Tail. Mounts to opener on LEFT side of drill. Will fit Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills.
SEED FIRMER, CIH P-500; NH 2080, 2085; EXAPTA CWB, W/ MOJO WIRE, RH
Seed Firmer, Standard Liquid Tail. Mounts to opener on RIGHT side of drill. Will fit Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills.
SEED FIRMER, CIH P-500; NH 2080, 2085; EXAPTA CWB, W/O MOJO WIRE, LH
Seed Firmer, Standard Liquid Tail. Mounts to opener on LEFT side of drill. Will fit Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills.
SEED FIRMER, CIH P-500; NH 2080, 2085; EXAPTA CWB, W/O MOJO WIRE, RH
Seed Firmer, Standard Liquid Tail. Mounts to opener on RIGHT side of drill. Will fit Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills.
SEED FIRMER, CIH P-500; NH 2080, 2085; OEM CWB, W/ MOJO WIRE, LH
Seed Firmer, Standard Dry Tail. Mounts to opener on LEFT side of drill. Will fit Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills. Will work with the OEM packer wheel.
SEED FIRMER, CIH P-500; NH 2080, 2085; OEM CWB, W/ MOJO WIRE, RH
Seed Firmer, Standard Dry Tail. Mounts to opener on RIGHT side of drill. Will fit Case-IH Precision Disk 500 & 500T and New Holland P2080 & P2085 single disk air drills. Will work with the OEM packer wheel.
Seed Guide is designed to funnel seed to the center of the seed tube to eliminate seed bounce which causes erratic seed spacing. Package of four guides.
Seed Guide is designed to funnel seed to the center of the seed tube to eliminate seed bounce which causes erratic seed spacing. Package of six guides..
AccuVac 40-cell Seed Plate. This item is the seed plate only.
SEED RIGHT BACKER PLATE, KINZE
For use with Kinze Brush Type mechanical meters. The backer plate works together with the OEM plates to enable the Brush Type meter to accurately plant small grains and cover crops. It helps to create seal around the edge of your plate to avoid small seed leaking out. The backer plate fits on top of your existing plate, with the foam side facing in and against the plate. Used to plant wheat, buckwheat, oats, cereal rye, annual rye, sorgham, sorghum sudan grass, teff grass, triticale, radish, turnips, crimson clover, alfalfa. Not recommended for planting sunflowers.
SEED RIGHT PLATE, JD, LARGE CELL
For use with John Deere vacuum (not including ExactEmerge) planters. Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. Seed mixes containing primarily large sized seeds (wheat & cereal rye) can also be used.
SEED RIGHT PLATE, JD, SMALL CELL
For use with John Deere vacuum (not including ExactEmerge). Smaller sized seeds, commonly greater than 35,000 seeds per pound and some seeds where a low planting rate is desired; radish, turnip, crimson clover.
SEED RIGHT PLATE, KINZE, LARGE CELL
For use with Kinze EdgeVac vacuum planters, Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. Seed mixes containing primarily large sized seeds (wheat & cereal rye) can also be used.
SEED RIGHT PLATE, KINZE, SMALL CELL
For use with Kinze EdgeVac vacuum planters. Smaller sized seeds, commonly greater than 35,000 seeds per pound and some seeds where a low planting rate is desired; radish, turnip, crimson clover.
SEED RIGHT PLATE, PP, BUNDLE DROP
For use with Precision Planting vSet meters. Includes Bundle Drop soybean plate and knocker wheel.
SEED RIGHT PLATE, PP, LARGE CELL
For use with Precision Planting vSet meters. Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. Seed mixes containing primarily large sized seeds (wheat & cereal rye) can also be used.
Self Aligning Bushing. 1" (25.4mm) inside diameter Self Aligning Bushing for PLT082684 and PLT016614 gauge wheel arm.
Threaded bushing with 5/8" hole for PLT079647 and PLT092817 gauge wheel arm.
Set Back Bracket for CIH planters. Allows parallel arms to be installed on a Case-IH split row planters.
Set back bracket for Kinze palnters, replaces your OEM setback bracket if it is worn out beyond repair.
Set-N-Seed is a planter seed depth calibration tool designed to accurately and efficiently set the desired depth from 1" to 2.5" using a 1" main block and multiple 1/2" stackable inserts.
Set-N-Seed is a planter seed depth calibration tool designed to accurately and efficiently set the desired depth from 1" to 2.5" using a 1" main block and multiple 1/2" stackable inserts. 4-Pack Display.
SHAFT & ARM KIT, FEEDERHOUSE DRUM, JD 9560 STS
Shaft and arm conversion kit for new 4-bolt bearing style drum. Required for John Deere 9560 STS serial number 710559 and prior.
SHAFT & ARM KIT, FEEDERHOUSE DRUM, JD 9660 STS, 9760 STS, 9860 STS
Shaft and arm conversion kit for new 4-bolt bearing style drum. Required for John Deere 9660 STS (s/n 711301 & prior), 9760 STS (s/n 711197 & prior) and 9860 STS (s/n 710892 & prior).
SHANK PROTECTOR, 1.75 X 9, PKG OF 100
Replacement shim for eSet.
SHIN GUARD, LANDOLL WEATHERPROOFER, 2400
Shin guard for Landoll WeatherProffer 2400 series. Will ONLY work with Acra-Plant ripper points.
Replacement singulator assembly for AccuVac.
Replacement singulator kit for AccuVac.
Replacement singulator assembly for eSet.
This handy attachment allows you to quickly add a standard 2" trailer hitch receiver (not included) to your skid loader so you can move trailers around your farm yard with your skid steer. Lightweight and easy to install and remove, it will fit right in your truck toolbox! NOTE: 2" standard receiver and ball hitch sold separately.
SKIP STOP CUSHION, GREAT PLAINS, NO HDW
With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion.
SKIP STOP CUSHION, NO HARDWARE
Skip stop cushion, no hardware included.
SLAT, FLAT, LONG, 28", PKG OF 10
Package of 10 replacement Long Tooth flat slats. Used in Long Tooth chaffers and sieves.
SLAT, FLAT, SHORT, 28", PKG OF 10
Package of 10 replacement Short Tooth flat slats. Used in Short Tooth chaffers and sieves.
Individual replacement Long Tooth slat, 23.75" in length. Used in Long Tooth chaffers and sieves.
SLAT, LONG TOOTH, 28", PKG OF 10
Package of 10 Long Tooth replacement slats. Used in Long Tooth chaffers and sieves.
Individual replacement Short Tooth slat. 23.75" in length. Used in Short Tooth chaffers and sieves.
SLAT, SHORT TOOTH, 28", PKG OF 10
Package of 10 replacement Short Tooth slats. Used in Short Tooth chaffers and sieves.
SMART CLEAN CYLINDER BRACKET, WA1345, BK, BW
Mounts the Smart Clean cylinder to the WA1345 row cleaner. Will fit John Deere 7000, 7100; Kinze 2000, 3000 series; White 6000, 8000 series without OEM no-till coulter. NOTE: One required per row.
SMART CLEAN CYLINDER BRACKET, WA1360, BKC
Mounts the Smart Clean or Clean Sweep cylinder to the WA1360 row cleaner. One is required for each row cleaner. Used with Kinze OEM double arm no-till coulter and Martin WA1360 row cleaners.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 12 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 12 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 12 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 12 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 16 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 16 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 16 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 16 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 23 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 23 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 23 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 23 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 24 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 24 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 24 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 24 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 31 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 31 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 31 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 31 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 32 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 32 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 32 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 32 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 36 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 36 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 36 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 36 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 48 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 48 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 48 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 48 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 54 ROW, W/ COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 54 row planter. Includes electronic controller, compressor, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Row cleaner mounting bracket sold separately.
SMART CLEAN KIT, BIDIRECTIONAL, HIGH FLOW, 54 ROW, W/O COMPRESSOR
Martin Smart Clean Bidirectional air control kit for 54 row planter. Includes electronic controller, high flow air lines and air cylinders. Can be operated using an iPad or a phone using the Martin app. Also compatible with ISOBUS. High flow air lines improve response time for pressure changes through the Martin App or ISOBUS controls. Will apply pressure to both sides of the air cylinder. Compressor NOT included. Row cleaner mounting bracket sold separately.
SNAP ON TINE, CIH, MACDON, NH, SINGLE
Snap on Replacement Tine for Case-IH 2142, 2152, 2162; MacDon FD70, FD75, FD130, FD135, FD140, FD145; New Holland 82C, 83C, 86C.
SNAP ON TINE, JD 600FD, 700FD, SINGLE
Snap on Replacement Tine for John Deere 630FD, 635FD, 640FD, 645FD, 730FD, 735FD, 740FD, 745FD and serial number 785000 & above. Designed to go over John Deere #HXE96538.
SNAP RING, KNIFEHEAD, CIH 810, 820, H/C GEN III
Knifehead bearing for Case-IH 810 and 820; Hart Carter Series 2 and Generation 3. Knifehead bearing, HRV455017, required. NOTE: Requires two per knifehead.
SNOUT SAVER, CIH 2200, 2400, 3200, 3400, INSIDE
Inside snout saver for Case-IH 2200, 2400, 3200 and 3400 series cornheads.
SNOUT SAVER, CIH 2200, 2400, 3200, 3400, INSIDE
Inside snout saver for Case-IH 2200, 2400, 3200 and 3400 series cornheads with cutout for Height Control Sensor.
SNOUT SAVER, CIH 2200, 2400, 3200, 3400, OUTSIDE
Outside snout saver for Case-IH 2200, 2400, 3200 and 3400 series cornheads with cutout for Height Control Sensor.
SNOUT SAVER, CIH 2200, 2400, 3200, 3400, OUTSIDE
Outside snout saver for Case-IH 2200, 2400, 3200 and 3400 series cornheads.
Inside snout saver for Case-IH 4400 series cornheads.
SNOUT SAVER, CIH 4400, OUTSIDE
Outside snout saver for Case-IH 4400 series cornheads.
SNOUT SAVER, CIH METAL HEAD, INSIDE
Inside snout saver for Case-IH with metal cornheads only.
SNOUT SAVER, CIH METAL HEAD, OUTSIDE
Outside snout saver for Case-IH with metal cornheads only.
SNOUT SAVER, DRAGO, POLY, INSIDE
Inside snout saver for Drago and Poly Heads.
SNOUT SAVER, JD 600, 700, C-SERIES, INSIDE, 30"
Inside snout saver for John Deere 600, 700 and C-series cornheads with 30" spacing.
SNOUT SAVER, JD 600, 700, OUTSIDE, 20", 22"
Outside snout saver for John Deere 600 and 700 series cornheads with 20" and 22" spacing.
SNOUT SAVER, JD 600, 700, OUTSIDE, 30"
Outside snout saver for John Deere 600 and 700 series cornheads with 30" spacing.
Inside snout saver for John Deere 90/40 series cornheads. Will only work with metal head.
Outside snout saver for John Deere 90/40 series cornheads. Will only work with metal head.
SNOUT SAVER, JD C-SERIES, INSIDE, 20", 22"
Inside snout saver for John C-series cornheads with 20" and 22" spacing.
SNOUT SAVER, POLY HEADS, OUTSIDE
Outside snout saver for Drago and Poly Heads.
SoyFX SC is a seed treatment that is applied at 2oz/cwt. One case contains 4 x 120 ounce jugs.
SoyFX SC is a seed treatment that is applied at 2oz/cwt.
Soyfx can be applied In-Furrow (16 oz/acre) or Foliar (16 oz/acre). Contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
Soyfx can be applied In-Furrow (16 oz/acre) or Foliar (16 oz/acre). Contains 1 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
SPACER BLOCK, QD2, CIH 900, 1000, 2R
Spacer Block for Case-IH 900/1000 series 8 & 12 Row Heads. NOTE: May be required for mounting on outside rows.
Speciality singulator assembly for eSet.
SPLITTER & INSERT, QUICK ATTACH II, PKG OF 4
Package of 4 replacement splitter and insert for Quick Attach mount Keeton seed firmers.
Replacement splitter insert for Universal, Kinze and seed tube mount Keeton Seed Firmers.
TheSponge Gun Pro Series is a drift free weed wiper that attaches to any back pack or pump up sprayer. It comes with a heavy duty spray gun and spray tip (INDIVIDUALLY BOXED). This is the perfect for the Professional Landscaper.
Mount this holder wherever you need to have easy access to your spray can.
Replacement spring for S.I. Distributing and Kinze 1993 and newer closing wheel bracket. Will NOT fit John Deere OEM closing wheel bracket.
SPRING PIN, JD 7200, 1700 (2007-), PKG OF 4
Small lift assist spring for pin adjust row cleaners.
Coiled spring for left hand side of UMO-100 fertilizer opener. It is recommended to also purchase a new MRT003922 seal because it is usually ruined when removing the old spring.
Coiled spring for right hand side of UMO-100 fertilizer opener. It is recommended to also purchase a new MRT003922 seal because it is usually ruined when removing the old spring.
ST-IA 13501 ORANGE, IA, TURBO FLAT FAN
MagnoJet, STIA 135 Degree 01 Orange, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.
ST-IA 13501.5 GREEN, IA, TURBO FLAT FAN
MagnoJet, STIA 135 Degree 01.5 Green, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.
ST-IA 13502 YELLOW, IA, TURBO FLAT FAN
MagnoJet, STIA 135 Degree 02 Yellow, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.
ST-IA 13502.5 LILAC, IA, TURBO FLAT FAN
MagnoJet, STIA 135 Degree 02.5 Lilac, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.
ST-IA 13503 BLUE, IA, TURBO FLAT FAN
MagnoJet, STIA 135 Degree 03 Blue, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.
ST-IA 13504 RED, IA, TURBO FLAT FAN
MagnoJet, STIA 135 Degree 04 Red, Ceramic Spray Nozzle, Air Inducted, Turbo Flat Fan. Preferably sold in package quantity of 6.
STACKABLES, PAIR, SET-N-SEED, 1/2"
Extra set of half inch stackables for fine tuning your planter depth. The Set-N-Seed unit comes with three pairs when purchased brand new.
STACKABLES, PAIR, SET-N-SEED, 1/4"
Fine tune your planter depth to 1/4" utilizing the Set-N-Seed 1/4" Stackable Depth Attachment.
STALK STOMPER, G4 TRACTOR, CHALLENGER 700, 700B, 700C, 700D, 2-24"
Challenger 700, 700B, 700C, 700D series (all models) tractor stalk stomper kit with two (2) 24" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CHALLENGER 700, 700B, 700C, 700D, 2-36"
Challenger 700, 700B, 700C, 700D series (all models) tractor stalk stomper kit with two (2) 36" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CHALLENGER 800, 2-24"
Challenger 800 series (all models) tractor stalk stomper kit with two (2) 24" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CHALLENGER 800, 2-36"
Challenger 800 series (all models) tractor stalk stomper kit with two (2) 36" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH MAGNUM, 235, 250, 260, 280, 290, 310, 315, 340, 370, 380, 2-24"
Case-IH Magnum 235, 250, 260, 280, 290, 310, 315, 340, 370, 380 tractor stalk stomper kit with two (2) 24" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH MAGNUM, 235, 250, 260, 280, 290, 310, 315, 340, 370, 380, 4-24"
Case-IH Magnum 235, 250, 260, 280, 290, 310, 315, 340, 370, 380 tractor stalk stomper kit with four (4) 24" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH QUADTRAC 450, 500, 540, 550, 580, 600, 620, 2-36"
Case-IH 2012 & newer Quadtrac 450, 500, 540, 550, 580, 600, 620 tractor stalk stomper kit with two (2) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH QUADTRAC, STEIGER 485, 535, 2-36"
Case-IH 2011 and older Quadtrac 485, 535 and Steiger 485, 535 tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH QUADTRAC, STEIGER 485, 535, 4-24"
Case-IH 2011 and older Quadtrac 485, 535 and Steiger 485, 535 tractor stalk stomper kit with four (4) 24" wide shoes and 35-foot hydraulic hose kit. Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH QUADTRAC, STEIGER 485, 535, 4-36"
Case-IH 2011 and older Quadtrac 485, 535 and Steiger 485, 535 tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH STEIGER 350, 370, 400, 420 ,450, 470, 2-36"
Case-IH 2012 & newer Steiger with front ballast) 350, 370, 400, 420 ,450, 470 tractor stalk stomper kit with two (2) 36" wide shoes and 35-foot hydraulic hose kit. Not compatible with front weight carrier. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH STEIGER 350, 370, 400, 420 ,450, 470, 4-36"
Case-IH 2012 & newer Steiger (without front ballast) 350, 370, 400, 420 ,450, 470 tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH STEIGER 350, 370, 400, 420 ,450, 470, 4-36"
Case-IH 2012 & newer Steiger (with front ballast) 350, 370, 400, 420 ,450, 470 tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. Not compatible with front weight carrier. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, CIH STEIGER 500, 540, 550, 580, 600, 620, 4-36"
Case-IH 2012 & newer Steiger 500, 540, 550, 580, 600, 620 tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 8000, 8010, 8020, 8030, 2-24"
John Deere 8000, 8010, 8020, 8030, 8R series (including track models except 8RX) tractor stalk stomper kit with two (2) 24" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 8000, 8010, 8020, 8030, 2-36"
John Deere 8000, 8010, 8020, 8030, 8R series (including track models except 8RX) tractor stalk stomper kit with two (2) 36" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 8000, 8010, 8020, 8030, 4-24"
John Deere 8000, 8010, 8020, 8030, 8R series (including track models except 8RX) tractor stalk stomper kit with four (4) 24" wide shoes and 25-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9030, 2-24"
John Deere 9030 series tractor stalk stomper kit with two (2) 24" wide shoes and 35-foot hydraulic hose kit. Not compatible with front weight bracket. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9030, 3-36"
John Deere 9030 series tractor stalk stomper kit with three (3) 36" wide shoes and 35-foot hydraulic hose kit. Not compatible with front weight bracket. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9R, 4-24"
John Deere 2012 through 2014 9R series tractor stalk stomper kit with four (4) 24" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9R, 4-36"
John Deere 2015 & newer 9R series tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9R, 4-36"
John Deere 2012 through 2014 9R series tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9RT, 2-36"
John Deere 2012 through 2014 9RT series tractor stalk stomper kit with two (2) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9RX, 2-24"
John Deere 2016 & newer 9RX series tractor stalk stomper kit with two (2) 24" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, JD 9RX, 2-36"
John Deere 2016 & newer 9RX series tractor stalk stomper kit with two (2) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, NH T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565, 2-36"
New Holland T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 (with front ballast) tractor stalk stomper kit with two (2) 36" wide shoes and 35-foot hydraulic hose kit. Not compatible with front weight carrier. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, NH T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565, 4-36"
New Holland T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 (without front ballast) tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, NH T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565, 4-36"
New Holland T9.390, T9.435, T9.450, T9.480, T9.505, T9.530, T9.560, T9.565 (with front ballast) tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. Not compatible with front weight carrier. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, NH T9.600, T9.615, T9.645, T9.670, T9.700, 4-36"
New Holland T9.600, T9.615, T9.645, T9.670, T9.700 tractor stalk stomper kit with four (4) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, NH T9.615, T9.670, 2-36"
New Holland T9.615, T9.670 (with Smarttrax) tractor stalk stomper kit with two (2) 36" wide shoes and 35-foot hydraulic hose kit. NOTE: Toolbar is required and is available for purchase separately, MYW022263.
STALK STOMPER, G4 TRACTOR, UNIVERSAL, 2-24"
Universal tractor stalk stomper kit with two (2) 24" wide shoes and 35' hydraulic hose kit. Does NOT include tractor specific mounting bracket or toolbar.
STALK STOMPER, G4 TRACTOR, UNIVERSAL, 2-36"
Universal tractor stalk stomper kit with two (2) 36" wide shoes and 35' hydraulic hose kit. Does NOT include tractor specific mounting bracket or toolbar.
STALK STOMPER, G4 TRACTOR, UNIVERSAL, 4-24"
Universal tractor stalk stomper kit with four (4) 24" wide shoes and 35' hydraulic hose kit. Does NOT include tractor specific mounting bracket or toolbar.
STALK STOMPER, G4 TRACTOR, UNIVERSAL, 4-36"
Universal tractor stalk stomper kit with two (4) 36" wide shoes and 35' hydraulic hose kit. Does NOT include tractor specific mounting bracket or toolbar.
12 Row - Case-IH 2200, 2400, 3200, 3400; New Holland 96C, 98C, 98D, 996 (without toolbar) G4 with 12" shoes.
STANDARD 120 DEGREE, SIDE VIEW, CAMERA & 15' CABLE
Standard definition 120 degree (side view) camera and 15 foot cable bundle.
STANDARD 120 DEGREE, SIDE VIEW, CAMERA & 30' CABLE
Standard definition 120 degree (side view) camera and 30 foot cable bundle.
STANDARD 120 DEGREE, SIDE VIEW, CAMERA & 65' CABLE
Standard definition 120 degree (side view) camera and 65 foot cable bundle.
STANDARD 140 DEGREE CAMERA & 15' CABLE
Standard definition 140 degree (wide view) camera and 15 foot cable bundle.
STANDARD 140 DEGREE CAMERA & 30' CABLE
Standard definition 140 degree (wide view) camera and 30 foot cable bundle.
STANDARD 140 DEGREE CAMERA & 65' CABLE
Standard definition 140 degree (wide view) camera and 65 foot cable bundle.
STANDARD 90 DEGREE CAMERA & 15' CABLE
Standard definition 90 degree camera and 15 foot cable bundle.
STANDARD 90 DEGREE CAMERA & 30' CABLE
Standard definition 90 degree camera and 30 foot cable bundle.
STANDARD 90 DEGREE CAMERA & 65' CABLE
Standard definition 90 degree camera and 65 foot cable bundle.
STEEL TRACK, SEMICIRCLE INSIDE, 1/4
Steel track, inside semicircle. Requires 2 per side.
STEEL TRACK, SEMICIRCLE OUTSIDE, 1/4
Steel track, outside semicircle. Requires 2 per side.
This step kit was designed for JD 1790 planters running eSet in 20” rows. The kit replaces the original step bracket by shifting the steps out and away from the eSet ProFlow mini hoppers, preventing any contact or interference. Fits 2004+ without rear hitch (Serial #705101+); Modify to fit 2003 without rear hitch (Serial #705100+); Not needed for 24-row 20” with rear hitch.
STOP KIT, JD 1790 15" ESET, PKG OF 4
The Stop Kit is for JD 1790 planter with configurations 12/23, 12/24, 16/31, 16/32, with short parallel arms on the 30” rows. The Stop Kit limits over extension of the parallel arms to prevent damage to the D-tube. Kit includes stops for 4 rows.
Stud bolt, 5/8-18 x 3-1/4", for APL430000 notched marker disc.
TAIL, DRILL, GP NARROW, LIQUID
Replacement Drill Tail, Standard Liquid Tail. Includes both poly pieces. Does not include any mounting hardware.
Replacement Drill Tail, Standard Liquid Tail. Includes both poly pieces. Does not include any mounting hardware.
TAIL, QUICK ATTACH, LOW PROFILE
Replacement tail for use with Quick Attach Bracket, Low Profile. Does not include any mounting hardware.
Replacement tail for use with Quick Attach Bracket, Low Stick. Does not include any mounting hardware.
Replacement tail for use with Quick Attach Bracket, Standard Tail with single liquid tube. Does not include any mounting hardware.
TAILBOARD TRASH BLOWER TUBE, JD S-SERIES
A metal tube that installs on end of fan exhaust above chopper or power tailboard. Blows off dust and trash that builds up on the tailboard. Fits John Deere S-Series combines; S650, S660, S670, S680, S690, S760, S770, S780 and S790.
TAILBOARD TRASH BLOWER TUBE, JD X9
A metal tube that installs on end of fan exhaust above chopper or power tailboard. Blows off dust and trash that builds up on the tailboard. Fits John Deere X9 combines.
TINE BOLT, HHCS, 5/8-18 UNF X 3-1/2, SMART-TILL
TIRE, GAUGE WHEEL, 3 X 16, OTICO, STANDARD, XP
Otico 3" x 16" Gauge Wheel Tire for John Deere XP, XP Pro, MaxEmerge 5, ExactEmerge; 1530, 1535 with MaxEmerge XP row units; late 1590, 1690, 1835, 1890, 1895, 1990 drills.
TIRE, GAUGE WHEEL, 3", 4AG, STANDARD, NON-XP
4AG Gauge Wheel Tire, 3" x 16" standard profile. Will fit John Deere planters MaxEmerge, MaxEmerge 2, MaxEmerge Plus and Pro row units; John Deere Drills 750, 1560, 1850, 1860; 1530, 1535 with MaxEmergePlus row units; early 1590, 1690, 1835, 1890, 1895, 1990; Kinze 2000, 3000, 4900; White 5100, 5700, 6000, 8000, 9000.
TIRE, GAUGE WHEEL, 3", 4AG, STANDARD, XP
4AG Gauge Wheel Tire, 3" x 16" standard profile. Will fit John Deere XP, XP Pro, MaxEmerge 5, ExactEmerge; 1530, 1535 with MaxEmerge XP row units; late 1590, 1690, 1835, 1890, 1895, 1990 drills.
TIRE, GAUGE WHEEL, 4.5 X 16, OTICO, RID
Otico 4.5" x 16" Gauge Wheel Tire for Case-IH 1200 and 2000 series.
TIRE, GAUGE WHEEL, 4.5 X 16, OTICO, STANDARD, XP
Otico 4.5" x 16" Gauge Wheel Tire for John Deere XP, XP Pro, MaxEmerge 5, ExactEmerge; 1530, 1535 with MaxEmerge XP row units; late 1590, 1690, 1835, 1890, 1895, 1990 drills.
TIRE, GAUGE WHEEL, 4.5", 4AG, STANDARD, NON-XP
4AG Gauge Wheel Tire, 4.5" x 16" standard profile. Will fit John Deere planters MaxEmerge, MaxEmerge 2, MaxEmerge Plus and Pro row units; John Deere Drills 750, 1560, 1850, 1860; 1530, 1535 with MaxEmergePlus row units; early 1590, 1690, 1835, 1890, 1895, 1990; Kinze 2000, 3000, 4900; White 5100, 5700, 6000, 8000, 9000.
TIRE, GAUGE WHEEL, 4.5", 4AG, STANDARD, XP
4AG Gauge Wheel Tire, 4.5" x 16" standard profile. Will fit John Deere XP, XP Pro, MaxEmerge 5, ExactEmerge; 1530, 1535 with MaxEmerge XP row units; late 1590, 1690, 1835, 1890, 1895, 1990 drills.
TIRE, GAUGE WHEEL, MUDSMITH, 3 X 16
TIRE, GAUGE WHEEL, MUDSMITH, 3 X 16, RID
3" RID Mudsmith tire only
TIRE, GAUGE WHEEL, MUDSMITH, 4.5 X 16, RID
Will fit existing John Deere XP, XP Pro; 1530, 1535 with XP. Allows seed trench to lift and fracture. Not recommended for use in worked ground.
TJ 10" EXTENSION KIT, DUAL TJT
TM-IA 15001 YELLOW, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 01 Yellow, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15001.5 BLUE, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 01.5 Blue, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15002 RED, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 02 Red, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15002.5 BROWN, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 02.5 Brown, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15003 GRAY, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 03 Gray, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15004 WHITE, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 04 White, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15005 LGT BLUE, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 05 Lgt Blue, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
TM-IA 15007.5 LGT GREEN, IA, DEFLECTOR
MagnoJet, TKC 150 Degree 07.5 Lgt Green, Ceramic Spray Nozzle, Air Inducted, Deflector Turbo. Preferably sold in package quantity of 6.
4" X 4" X 10' Toolbar for Tractor Stalk Stompers, 1/4" sidewall tubing.
4" X 4" X 12' Toolbar for Tractor Stalk Stompers, 1/4" sidewall tubing.
4" X 4" X 8' Toolbar for Tractor Stalk Stompers, 1/4" sidewall tubing.
TOOLBOX, 22 X 13 X 14, STEEL, BLACK
TOOLBOX, 30 X 15 X 18, STEEL, BLACK
TOOLBOX, 30 X 19 X 20, STEEL, BLACK
TOOLBOX, 36 X 17 X 21, STEEL, BLACK
TOOLBOX, 41 X 18 X 21, STEEL, BLACK
Toolbox to hold all the tools necessary for in the field maintenance.
Trail Jet Fertilizer Opener for a Kinze 3000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, KINZE 3000 SERIES, DUAL
Dual Trail Jet Fertilizer Opener for a Kinze 3000 series. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
Trail-Jet Fertilizer Opener for Monosem Units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
TRAIL-JET, MONOSEM UNITS, DUAL
Dual Trail-Jet Fertilizer Opener for Monosem Units. Price is per row. Nozzle not included. The Trail-Jet Fertilizer Opener includes the mounting bracket pictured and the complete arm assembly, TJT250050.
Includes mounting hardware, per row.
Treader wheel with 3 and 4-Bolt pattern. NOTE: Two wheels required per row.
Treader wheel with Kinze 6-Bolt pattern. Two wheels required per row.
TRUNNION BEARING ASSEMBLY, SMART-TILL
Stainless tube holder for Valion seed tube guard when using liquid.
Stainless tube holder for Valion seed tube guard when using liquid.
Tubing, Blue 1/4 inch Diameter, Per Foot.
Tubing, Red 1/4 inch Diameter, Per Foot.
UMO-150 FERTILIZER OPENER, DUAL, LH
Double disk unit mount fertilizer opener. Includes both left hand and right hand UMO-150's. Mounting bracket NOT included.
UMO-150 FERTILIZER OPENER, DUAL, RH
Double disk unit mount fertilizer opener. Includes both left hand and right hand UMO-150's. Mounting bracket NOT included.
UMO-150, NOTCHED, FERTILIZER OPENER, SINGLE, LH
Single disk unit mounted fertilizer opener with notched blade, Left hand. Mounting bracket NOT included.
UMO-150, NOTCHED, FERTILIZER OPENER, SINGLE, RH
Single disk unit mounted fertilizer opener with notched blade, Right hand. Mounting bracket NOT included.
UMO-150, SMOOTH, FERTILIZER OPENER, SINGLE, LH
Single disk unit mounted fertilizer opener, Left hand. Mounting bracket NOT included.
UMO-150, SMOOTH, FERTILIZER OPENER, SINGLE, RH
Single disk unit mounted fertilizer opener, Right hand. Mounting bracket NOT included.
UMO-150N FERTILIZER OPENER, DUAL, LH
Double disk unit mount fertilizer opener. Includes both left hand and right hand UMO-150 notched openers. Mounting bracket NOT included.
UMO-150N FERTILIZER OPENER, DUAL, RH
Double disk unit mount fertilizer opener. Includes both left hand and right hand UMO-150 notched blade. Mounting bracket NOT included.
Uniforce 5 section drill kit. Required for 50'-60' drills.
UNIFORCE ACCUMULATOR, 1 GALLON
Uniforce Accumulator Kit for 1 gal, for single box drill. Recommended only when seeding in terraces.
UNIFORCE ACCUMULATOR, 2.5 GALLON
UniForce Accumulator Kit 2.5 gal, for air drills. Recommended only when seeding in terraces.
UNIFORCE HYDRAULIC CYLINDER, JD 50 SERIES
Uniforce hydraulic cylinder for John Deere 50 series drills. One required per row.
UNIFORCE HYDRAULIC CYLINDER, JD 60/90 SERIES
Uniforce hydraulic cylinder for John Deere 60 and 90 series drills. One required per row.
UNIFORCE HYDRAULIC CYLINDER, JD PRO SERIES
Uniforce hydraulic cylinder for John Deere Pro- series drills. One required per row.
PAIR (2) of extra hydaulic hoses, 28' for 195 bushel John Deere 1910 tow between cart.
PAIR (2) of extra hydaulic hoses, 33' for 250 and 270 bushel John Deere 1910 tow between cart.
PAIR (2) of extra hydaulic hoses, 38' for 350 and 430 bushel John Deere 1910 tow between cart.
Air drill or 2 box drills pulled together hydraulic valve kit. Controls up to 52 openers.
Air drill or 2 box drills pulled together hydraulic valve kit. Controls up to 78 openers.
Air drill or 2 box drills pulled together hydraulic valve kit. Controls up to 96+ openers.
Box drill hydraulic line-body valve kit. Controls up to 36 openers.
Single-rank (15") CCS drill hydraulic line-body valve kit. Controls up to 36 openers.
UNIFORCE IN CAB CONTROL, EXP600202, EXP600203, EXP600204
In cab adjustment kit with wiring harness for EXP600202, EXP600203 and EXP600204.
UNIFORCE IN CAB CONTROL, EXP600215, EXP600217
In cab adjustment kit with wiring harness for EXP600215 and EXP600217.
Extra wiring (46ft) for tow between carts ONLY for in cab control.
UNLOADING AUGER TUBE, CHALLENGER 660, 670
Unloading auger tube for Challenger 660 and 670. 213-1/2" in length. Yellow in color.
UNLOADING AUGER TUBE, GLEANER A65, A75
Unloading auger tube for Gleaner A65 and A75. 213-1/2" in length. Silver in color.
UNLOADING AUGER TUBE, GLEANER L, M, N, R
Unloading Auger Tube for Gleaner L, M, N and R combines. Painted silver and 145-5/8" long.
UNLOADING AUGER TUBE, GLEANER L, M, N, R
Unloading Auger Tube for Gleaner L, M, N and R combines. Glavanized and 145-5/8" long.
UNLOADING AUGER TUBE, GLEANER R62, R65, R72, R75
Unloading Auger Tube for Gleaner R62, R65, R72 and R75. 180-3/4 long and 14" diameter.
UNLOADING AUGER TUBE, GLEANER S67, S77
Unloading Auger Tube for Gleaner S67 and S77. 216-3/4" long and 14" diameter.
Inner solid unloading auger tube for Case-IH 1620, 1640, 1660, 1680, 1644, 1666, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388 (prior to s/n HAJ300001). 90" in length.
Inner unloading auger tube for Case-IH 1620, 1640, 1660, 1680, 1644, 1666, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388 ((prior to s/n HAJ300001). 90" in length, perforated.
UNLOADING AUGER TUBE, INNER, CIH 2388, 2577, 2588
Inner solid unloading auger tube for Case-IH 2388, 2577 and 2588 after s/n HAJ300001 with 18' or 21' unloading auger. 126" in length.
UNLOADING AUGER TUBE, INNER, CIH 2388, 2577, 2588
Inner solid unloading auger tube for Case-IH 2388, 2577 and 2588 after s/n HAJ300001 with 18' or 21' unloading auger. 126" in length.
UNLOADING AUGER TUBE, JD 6600, 7700
Unloading auger tube for John Deere 6600 and 7700. 142-3/4" in length.
Solid unloading auger tube for John Deere 6620, 7720, 8820 (with 17' unloading auger); 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650, 9660, 9750STS (with 20' unloading auger). 144-1/2" in length.
UNLOADING AUGER TUBE, JD 9560, 9560STS
Solid unloading auger tube for John Deere 9560 and 9560STS with 18-1/2' unloading auger. 144-1/2" in length.
UNLOADING AUGER TUBE, JD 9560STS, 9570STS, 9660, 9660STS, 9670STS, 9760STS, S550, S650
Solid unloading auger tube for John Deere 9560STS, 9570STS, 9660, 9660STS, 9670STS, 9760STS, S550, S650 with 21-1/2' unloading auger. 180-1/4" in length.
UNLOADING AUGER TUBE, M/F 8560, 8570, 8780
Unloading auger tube for Massey Ferguson 8560, 8570 and 8780. 142-1/2" in length.
UNLOADING AUGER TUBE, M/F 8570, 8780, 9690, 9790
Unloading auger tube for Massey Ferguson 8570, 8780, 9690 and 9790. 178-1/2" in length.
UNLOADING AUGER TUBE, M/F 9690, 9790
Unloading auger tube for Massey Ferguson 9690 and 9790. 213-1/2" in length. Red in color.
UNLOADING AUGER TUBE, MIDDLE, JD 9670STS, 9770STS, 9870STS, S660, S670, S680, S690
Solid middle unloading auger tube for John Deere 9670STS, 9770STS, 9870STS; S660, S670, S680, S690 prior to s/n 775000 with 3-piece folding high rate 22-1/2' unloading auger. 115-13/16" in length.
UNLOADING AUGER TUBE, MIDDLE, JD S660, S670, S680, S690, S760, S770, S780, S790
Solid middle unloading auger tube for John Deere S660, S670, S680, S690 after s/n 775000; S760, S770, S780, S790 with 3-piece high rate 26' or 28-1/2' unloading auger. 93-3/8" in length.
Outer unloading auger tube for Case-IH 1620, 1640, 1660, 1680, 1644, 1666, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388 (prior to s/n HAJ300001). 82-1/2" in length.
Outer unloading auger tube for Case-IH 1620, 1640, 1660, 1680, 1644, 1666, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388 (prior to s/n HAJ300001). 118-1/2" in length.
Outer unloading auger tube for Case-IH 1620, 1640, 1660, 1680, 1644, 1666, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388 (prior to s/n HAJ300001). 46-1/2" in length
UNLOADING AUGER TUBE, OUTER, CIH 2388, 2577, 2588
Outer unloading auger tube for Case-IH 2388, 2577 and 2588 after s/n HAJ300001 with 21' unloading auger. 118" in length.
UNLOADING AUGER TUBE, OUTER, CIH 2388, 2577, 2588
Outer unloading auger tube for Case-IH 2388, 2577 and 2588 after s/n HAJ300001 with 18' unloading auger. 82-1/2" in length.
Outer solid unloading auger tube for standard rate Case-IH 5088, 6088, 7088, 5130, 5140, 5150, 6130, 6140, 6150, 7130, 7140, 7150, 7230, 7240, 7250, 8230, 8240, 8250, 9230, 9240, 9250. 198-1/4" in length.
UNLOADING AUGER TUBE, OUTER, CIH 7230, 7240, 7250, 8230, 8240, 8250, 9230, 9240, 9250
Outer unloading auger tube for Case-IH 7230, 7240, 7250, 8230, 8240, 8250, 9230, 9240, 9250 folding high rate auger. 87-1/2" in length.
UNLOADING AUGER TUBE, OUTER, CIH 7230, 7240, 8230, 8240, 9230, 9240
Inner unloading auger tube for Case-IH 7230, 8230, 9230; 7240, 8240, 9240 prior to serial number YEG227001. Compatible with folding high rate auger. 172" in length.
UNLOADING AUGER TUBE, OUTER, CIH 7230, 7240, 8230, 8240, 9230, 9240
Outer solid unloading auger tube for high rate Case-IH 7230, 7240, 8230, 8240, 9230 and 9240 with 21' unloading auger. 194-5/8" in length.
UNLOADING AUGER TUBE, OUTER, CIH 7240, 7250, 8240, 8250, 9240, 9250
Inner unloading auger tube for Case-IH 7250, 8250, 9250; 7240, 8240, 9240 after serial number YEG227001. Compatible with folding high rate auger. 172" in length.
Solid outer unloading auger tube for John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS; S660, S670, S680, S690 prior to s/n 775000 with 1-piece high rate 22-1/2' unloading auger. 184" in length; 17" in diameter
UNLOADING AUGER TUBE, OUTER, JD 9670STS, 9770STS, 9870STS, S660, S670, S680, S690
Solid outer unloading auger tube for John Deere 9670STS, 9770STS, 9870STS; S660, S670, S680, S690 prior to s/n 775000 with 3-piece folding high rate 22-1/2' unloading auger. 66" in length.
Solid outer unloading auger tube for John Deere 9670STS, 9770STS, 9870STS, S660, S670, S680, S690, S760, S770, S780, S790 with 3 piece high rate 26' unloading auger. 112-1/4" in length.
UNLOADING AUGER TUBE, OUTER, JD S660, S670, S680, S690, S760, S770, S780, S790
Solid outer unloading auger tube for John Deere S660, S670, S680, S690 after s/n 775000; S760, S770, S780, S790 with 1-piece high rate 22-1/2' unloading auger. 161-5/8" in length.
UNLOADING AUGER TUBE, OUTER, JD S660, S670, S680, S690, S760, S770, S780, S790
Solid outer unloading auger tube for John Deere S660, S670, S680, S690 after s/n 765172; S760, S770, S780, S790 with 3-piece high rate 28-1/2' unloading auger. 130-7/8" in length.
UNLOADING AUGER, GLEANER L, M, N, R
Unloading Auger for Gleaner L, M and N. 164-1/8" in length.
UNLOADING AUGER, GLEANER R60, R62, R70, R72
Unloading Auger for Gleaner R60, R62, R70 and R72. 193-1/2" in length.
UNLOADING AUGER, GLEANER R62, R65, R72, R75
Unloading Auger for Gleaner R62, R65, R72 and R75. 193-1/2" in length.
UNLOADING AUGER, GLEANER S67, S77
Unloading Auger for Gleaner S67 and S77. 229-1/4" in length.
UNLOADING AUGER, INNER, CIH 1640, 1644, 1666, 1660, 1680, 1688, 2144, 2166, 2188, 2344, 2366, 2388
Inner Unloading Auger with spline bore for Case-IH 1640, 1644, 1666, 1660, 1680, 1688, 2144, 2166, 2188, 2344, 2366 and 2388. Will work with 172" or 208" systems.
UNLOADING AUGER, INNER, CIH 2388, 2577, 2588
Inner Unloading Auger for Case-IH 2388 after s/n HAJ300001; 2577, 2588. 125-1/4" in length.
Inner Unloading Short Auger for John Deere 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9560STS, 9570STS, 9600, 9610, 9650, 9650STS, 9660 and 9750STS. Used on 17' and 20' two piece unloading augers. 74" in length.
UNLOADING AUGER, INNER, JD 9650STS, 9660STS, 9750STS, 9760STS
Inner Unloading Auger for John Deere 9650STS (s/n 690501 and up), 9660STS, 9750STS (s/n 690601 and up) and 9760STS. 82-1/2" in length.
High Rate Inner Unloading Auger for 22-1/2' and 26' auger. Will fit John Deere 9660 STS, 9670 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS, S660, S670, S680 and S690.
UNLOADING AUGER, JD 6600, 7700
Unloading Auger for John Deere 6600 and 7700.
UNLOADING AUGER, M/F 8560, 8570
Unloading Auger for Massey Ferguson 8560 and 8570. 163.65" in length.
UNLOADING AUGER, M/F 8570, 8780
Unloading Auger for Massey Ferguson 8570 and 8780. 199.65" in length.
UNLOADING AUGER, M/F 9690, 9790
Unloading Auger for Massey Ferguson 9690 and 9790. 234.65" in length.
UNLOADING AUGER, MIDDLE, JD 9670STS, 9770STS, 9870STS, S660, S670, S680, S690
High Rate Middle Unloading Auger for 26' auger. Will fit John Deere 9670STS, 9770STS, 9870STS, S660, S670, S680 and S690.
Outer Unloading Auger for 172" system. Will fit Case-IH 1640, 1644, 1666, 1660, 1680, 1688, 2144, 2166, 2188, 2344, 2366 and 2388.
Outer Unloading Auger for 208" system. Will fit Case-IH 1640, 1644, 1666, 1660, 1680, 1688, 2144, 2166, 2188, 2344, 2366 and 2388. 125-1/4" in length.
Outer Unloading Short Auger for John Deere 6620, 7720, 8820, 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9560STS, 9570STS, 9600, 9610, 9650, 9650STS, 9660 and 9750STS. For 14' (1-piece) system and as the outer auger for 20' (2-piece system).
Outer Unloading Auger for John Deere 9400, 9410, 9450, 9500, 9510, 9550, 9560, 9560STS, 9570STS, 9600, 9610, 9650, 9650STS, 9660 and 9750STS. Outer auger for 17' (2-piece system).
UNLOADING AUGER, OUTER, JD 9560, 9650 STS
Outer Unloading Auger for John Deere 9560 and 9650 STS. Used with 18-1/2' system.
UNLOADING AUGER, OUTER, JD 9560, 9660, 9560 STS, 9660 STS, 9760 STS
Outer Unloading Auger for John Deere 9560, 9660, 9560 STS, 9660 STS and 9760 STS. Used with 21-1/2' system.
High Rate Outer Unloading Auger for 22-1/2' auger. Will fit John Deere 9670STS, 9770STS, 9870STS, S660, S670, S680 and S690.
UNLOADING AUGER, OUTER, JD 9670STS, 9770STS, 9870STS, S660, S670, S680, S690
High Rate Outer Unloading Auger for 26' auger. Will fit John Deere 9670STS, 9770STS, 9870STS, S660, S670, S680 and S690.
V-SHOT KIT, KINZE 3000, SHORT (G)
V-Shot Insert. Fits Kinze 3000 series. Short V-Shot is 1/8" below seed.
Valion seed tube guard for Kinze 3000 series.
Replacement clear plastic vent cover installed on D-Tube for Pro-Series eSet only.
VENTED HOPPER LID, ESET PRO-SERIES
Replacement vented hopper lid for eSet Pro-Series.
20" x 5mm vertical tillage blade for McFarlane Reel Disc. Celsan blade with single heat treat.
20" x 6.5mm, 20 wave vertical tillage blade for Great Plains Turbo-Till and Turbo Max. Forges De Niaux (FDN) blade with 3 zones of hardness.
20" x 6.5mm, 20 wave vertical tillage blade for Great Plains Turbo-Till and Turbo Max. Celsan blade with single heat treat.
VERTICAL TILLAGE, 20" X 6.5MM, LF/RR
20" x 6.5mm, 20 wave Left Front, Right Rear vertical tillage blade for Case-IH 330 and 335. Forges De Niaux (FDN) blade with 3 zones of hardness
VERTICAL TILLAGE, 20" X 6.5MM, LF/RR
20" x 6.5mm, 20 wave Left Front, Right Rear vertical tillage blade for Case-IH 330 and 335. Celsan blade with single heat treat.
VERTICAL TILLAGE, 20" X 6.5MM, RF/LR
20" x 6.5mm, 20 wave Right Front, Left Rear vertical tillage blade for Case-IH 330 and 335. Forges De Niaux (FDN) blade with 3 zones of hardness.
VERTICAL TILLAGE, 20" X 6.5MM, RF/LR
20" x 6.5mm, 20 wave Right Front, Left Rear vertical tillage blade for Case-IH 330 and 335. Celsan blade with single heat treat.
22" x 6.5mm, 20 wave vertical tillage blade for Great Plains Turbo-Chisel. Celsan blade with single heat treat.
VERTICAL TILLAGE, 22" X 6.5MM, CELSAN
22" x 6.5mm razor edge 32 flute vertical tillage blade for Krause Excelerator 8000 series.
VERTICAL TILLAGE, 22" X 6.5MM, FDN
22" x 6.5mm razor edge 32 flute vertical tillage blade for Krause Excelerator 8000 series.
22" x 6mm vertical tillage blade for Landoll 7000 series. Celsan blade with single heat treat.
24" x 6mm vertical tillage blade for Landoll 7000 series. Celsan blade with single heat treat.
VERTICAL UNLOADING AUGER, JD 6620, 7720, 8820
Vertical Unloading Auger for John Deere 6620, 7720 and 8820.
Vertical Unloading Auger for John Deere 9400, 9410, 9450 (to serial number 695100), 9500 (to serial number 695200), 9500SH (to serial number 695700),9510, 9510SH, 9550SH, 9600, 9610, 9650 (to serial number 695300) and 9650CTS (to serial number 695400).
VERTICAL UNLOADING AUGER, JD 9450, 9550, 9550SH, 9650, 9650CTS, 9560, 9560SH, 9660, 9660CTS
Vertical Unloading Auger for John Deere 9450 (s/n 695101 & up), 9550 (s/n 695301 & up), 9550SH (s/n 695701 & up), 9650 (s/n 695301 & up), 9650CTS (s/n 695401 & up), 9560, 9560SH, 9660 and 9660CTS.
VERTICAL UNLOADING AUGER, JD 9560STS, 9650STS, 9660STS, 9750STS
Vertical Unloading Auger, high rate, for John Deere 9660STS, 9760STS, 9860STS, 9670STS, 9770STS and 9870STS.
VERTICAL UNLOADING AUGER, JD 9560STS, 9650STS, 9660STS, 9750STS
Vertical Unloading Auger, standard rate, for John Deere 9560STS, 9650STS, 9660STS and 9750STS.
VERTICAL UNLOADING AUGER, M/F 8560, 8570, 8780, 9690, 9790
Vertical Unloading Auger for Massey Ferguson 560, 8570, 8780 and early 9690, 9790.
VERTICAL UNLOADING AUGER, S660, S670, S680, S690
Vertical Unloading Auger for John Deere S660, S670, S680 and S690.
WA BRACKET, JD, KINZE, WHITE 6000, 9000, 1-1/2" STEM
John Deere, Kinze and White EARLY 6000 series with REGULAR down pressure springs, accepts 1-½" stem wheel assemblies. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For all John Deere MaxEmerge; Kinze; White early 6000 series with REGULAR down pressure springs. Top holes on early 6000 series must be 9-1/2" center to center. White early 6000 series with HEAVY duty down pressure springs require MRT000610 mounts.
WA BRACKET, KINZE 4900, 1-1/2" STEM
Kinze 4900 series planters without pneumatic down pressure. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320.
Wear Plate for AGCO Series 3, 300, 400, 500, 800, 8000 and 9250; Case-IH 810, 820, 1010 and 1020.
Wear plate for John Deere 200 series. One used on drive end.
Wear plate for John Deere 200 and 900 series.
2 Degree angled closing wheel bracket. Increases aggressiveness of spading and dimple closing wheels. Fits late model Deere planters with bolt-on closing wheels.
2 Degree angled closing wheel bracket. Increases aggressiveness of spading and dimple closing wheels. Fits Kinze planters with bolt-on clos-ing wheels.
WEED WIPER, 3 POINT HITCH, 10'
3 pt. hitch mount 10 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 15'
3 pt. hitch mount 15 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 20'
3 pt. hitch mount 20 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 25'
3 pt. hitch mount 25 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 30'
NEW 30 ft. 3 pt. hitch mount Weed Wiper. This kit comes with a tank and pump. Our 30 ft. unit has a 10 ft. center and two 10 ft. wings that fold back for for road position. Attach our 3-point hitch model to your selected tractor and start wiping! WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
ATV 10 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
ATV 15 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
Front Bucket 10 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
Front Bucket 10 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
Front Bucket 20 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
10 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
15 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
20 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
New 25 ft. pull-type weed wiper. Our pull-type units include a tank and pump for your application convenience. This particular unit has a 5' tool bar & 2 10' wings, making it easily transportable on a standard 16' trailer. The sponge boom height can be adjusted from 2" to 42" above the ground. WIPE OUT TALLER GROWING
30 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
40 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, SPRAYER BOOM, 120'
This is our 120 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
TOP CROP 10 ft. kit (pump fed) Build your own boom. Comes with manifold and tubing. (Requires a sprayer tank/pump with 1.4 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
TOP CROP 15 ft. kit (pump fed) Build your own boom. Comes with manifold and tubing. (Requires a sprayer tank/pump with 1.8 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
TOP CROP 20 ft. kit (pump fed.) Mounts to any spray boom tool bar. (Requires a sprayer tank/pump with 3 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
This is our 30 ft. pump fed Top Crop kit that you can mount to any spray boom tool bar. This particular kit requires a sprayer tank/pump with 3 GPM minimum.
This is our 40 ft. pump fed Top Crop kit that you can mount to any spray boom tool bar. This particular kit requires a sprayer tank/pump with 3 GPM minimum.
WEIGHT TRANSFER, CIH 1255, 24R
Hydraulic Frame Weight Distribution System available for Case-IH 1255. Will ONLY fit 24 row planters.
WEIGHT TRANSFER, HARVEST INTERNATIONAL 16R
Hydraulic Frame Weight Distribution System available for Harvest International Laser Pro 1 with John Deere 1770/1175 toolbar. Will ONLY fit 12 or 16 row planters.
WEIGHT TRANSFER, JD 1770, 1775, 12R (2022 & PRIOR)
Hydraulic Frame Weight Distribution System available for John Deere 1770 and 1775. Will ONLY fit 12 row 2022 and prior planters.
WEIGHT TRANSFER, JD 1770, 1775, 16R (2022 & PRIOR)
Hydraulic Frame Weight Distribution System available for John Deere 1770 and 1775. Will ONLY fit 16 row planters 2022 and prior.
WEIGHT TRANSFER, JD 1770, 1775, 24R
Hydraulic Frame Weight Distribution System available for John Deere 1770 and 1775. Will ONLY fit 24 row planters.
WEIGHT TRANSFER, JD 1775, 12R (2023 & NEWER)
Hydraulic Frame Weight Distribution System available for John Deere 1775. Will ONLY fit 12 row 2023 and newer planters.
WEIGHT TRANSFER, JD 1775, 16R (2023 & NEWER)
Hydraulic Frame Weight Distribution System available for John Deere 1775. Will ONLY fit 16 row 2023 and newer planters.
WEIGHT TRANSFER, JD 1790, 16/31R, 16/32R
Hydraulic Frame Weight Distribution System available for John Deere 1790. Will ONLY fit 16/31 or 16/32-row planters.
WEIGHT TRANSFER, JD 1790, 1795, 16/31R, 16/32R
Hydraulic Frame Weight Distribution System available for John Deere 1790, 1795. Will ONLY fit 16/31 or 16/32-row planters.
Hydraulic Frame Weight Distribution System available for John Deere 1790. Will ONLY fit 24-row planters.
Hydraulic Frame Weight Distribution System available for John Deere DB60.
Optional wheel weight. Two required per row. Adds weight to floating row cleaners. For use when planting in extremely hard soil conditions. Weight 4 lbs. each. Fit 3-bolt hubs.
Y-Not Split It applies liquid to furrow sidewalls. Will work with planter rebounders except Case-IH.
Y-TUBE KIT, JD BAUER PRO-SERIES ESET
Kit includes 1 Y-tube, screen, 2 foam gaskets and rubber o-ring. The Pro-Series Y-Tube is designed for Deere Bauer planters running eSet with more than 32 rows. You will need one per row for each row over 32. For example, if you have 36 rows you will need 4 Y-Tubes. If you have 48 rows you will need 16 Y-Tubes.
Tie Strap, Black. For seed tube mounted firmers.
Feature Articles
top