The following is a list of all the Categories, Products and Feature Articles on our site. We hope it will assist you in finding what you're looking for.
C1000 C125
C125
C2000
C2200
C3000
Cables
Caldwell/Graber
Cameras
Cameras, Camera Systems
Capello
G4 Stalk Stomper kits available for Capello Diamant and Capello Quasar
Capello Diamant
G4 Stalk Stompers available for Capello Diamant cornheads
Capello Quasar
G4 Stalk Stompers available for Capello Quasar cornheads
Caps for Nozzles
Caps for MagnoJet nozzles and other nozzles......
Case - IH
SCH EasyCut Cutter Bar Conversion Kits for Case-IH
Case - IH
Case - IH
S.I. Belt Meter Kits - Case-IH Drills
Case - IH
Case - IH
SCH EasyCut Cutter Bar Conversion Kits for Case-IH
Case -IH 7010, 7120; New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060
Will also fix CX720, 740, 760, 780, 8030, 8040, 8050 - Electric (In Cab) Adjust.
Case -IH 7010, 7120; New Holland - CR920, 940, 960, 6090, 7090, 8080, 9040, 9060
Will also fix CX720, 740, 760, 780, 8030, 8040, 8050 - Manual Adjust.
Case-IH
CASE-IH
TRAIL-JET FERTILIZER OPENER - CASE-IH
Case-IH
Stalk Stompers for Tractors Kits, for Case-IH models, Include mounting brackets, lift arm assemblies, shoe configuration and a hydraulic hose kit.
Case-IH
Case-IH
Case-IH
G4 Stalk Stomper kits available for Case-IH 800, 900/1000, 2200, 2400, 2600, 2606, 3200, 3400, 4200, 4400 series cornheads.
Case-IH
Case-IH
Please call for complete Reel replacement options for other combines and swathers not listed.
Case-IH
Case-IH
High Speed Compact Disc Blades for Case-IH
Case-IH
Martin-Till's Weight Transfer System for Case-IH
Case-IH
Case-IH
Case-IH
Case-IH
Rebounder Seed Deflectors for Case IH Drills
Case-IH
Rebounder Seed Deflectors - Case-IH Planters
Case-IH
Rebounder Seed Deflectors for Case IH Drills
Case-IH
Rebounder Seed Deflectors for Case-IH Planters
Case-IH
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Case-IH 800, 900, 950, 955, 1200, 5400SS, 5500SS
Case-IH
Vertical Unloading Auger for Case-IH
Case-IH
Disc Openers - Case-IH - Drills and Air Seeders
Case-IH
Hydra-Maxx Down Pressure System, for Case-IH Air Seeders, equally distributes the weight across the entire air seeder.
Available for Case-IH 500T and 500DS air seeders
Case-IH
Unloading auger tubes for Case-IH combines
Case-IH
Unloading augers for Case-IH
Case-IH
Unloading Auger Extension Kits for Case-IH
Case-IH
Cornhead Augers for Case-IH cornheads
Case-IH
May Wes Poly Auger Trough Liners for Grain Tanks
• Guards against corrosion
• Provides a smooth, slick surface for the grain to flow out of the grain tank.
• Full coverage of the trough underneath the auger keeps grain in the tank for maximum harvest potential.
Case-IH
Case-IH
Case-IH
Radura Rotary Disc Mower Blades for Case-IH
Case-IH
Case-IH
Disc Openers for Case-IH
Case-IH
WearParts Vertical Tillage blades for Case-IH
Case-IH
Case-IH
Case-IH
Bushel Plus MAD Concaves for Case-IH
Available for the following models: 1680, 1688, 2188, 2388, 2588, 7088, 7130, & 7140; 2004 & Newer Flagship
Case-IH
OEM replacement guards available for Case-IH 820, 1010, 1020, 2010, 2020, 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162, 3020, 3152, 3162
Case-IH
Case-IH
May Wes UHMW Poly Snout Savers for Case-IH
Case-IH
May Wes UHMW poly Ear Savers for Case-IH
Case-IH
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Case-IH 800, 900, 955, 1200, 5400SS, 5500SS; 1200 Series with DeltaForce
Case-IH
Case-IH
PPS PREMIUM COMPLETE FLANGE BUSHING KITS WITH PARALLEL ARMS FOR CASE-IH
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms - Best Option for Optimal Planter Repair
Case-IH 800, 900, 955, 1200, 5400SS, 5500SS
Case-IH
Thrash Master Concave Systems for Case-IH
Models Available for Case IH: Case IH Flag Ship - 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010
Case-IH
CASE-IH SQUARE BALER 8555: RASSPE SINGLE KNOTTER, RS 6003, W/O CAM GEAR
CASE-IH SQUARE BALER 8570: RASSPE SINGLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8575: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8576: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8580: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8585: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
CASE-IH SQUARE BALER 8590: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ CAM GEAR
Case-IH 1010 & 1020
Case-IH model years 1994 and prior. Case-IH 1010 headers (below S/N JJC0200000) and 1020 headers (below JJC0215000).
Case-IH 1010 & 1020
Case-IH model years 1995-1997. Case-IH 1010 headers (between S/N JJC0200001 - JJC0300000) and 1020 headers (between S/N JJC0215001 - JJC0315000).
Case-IH 1010 & 1020
Case-IH model years 1998 and newer. Case-IH 1010 headers (S/N JJC0300001 - and CBJ023001 -) and Case-IH 1020 headers (S/N JJC0315001 - and CBJ023003 -).
Case-IH 1010, 1020
Radura OEM Replacement Sectional Knife Assemblies for Case-IH 1010 & 1020. Available for 17.5', 20', 22.5', 25' and 30'.
Case-IH 1010, 1020 Runner
Case-IH 1010, 1020 reconditioned OEM runner. Available for greaseable and oil bath wobble box.
Case-IH 1010, 1020 Series Headers
SCH Pro-Drive Kits for Case-IH 1020 Flex Headers and Case-IH 1010 Rigid Header
Case-IH 1010, 1020, 2010, 2020
Case-IH 1010/1020/2142/2152/2162 - 8-7/8" Long
Case-IH 1020
Poly Skid Shoes available for 15', 16.5', 17.5', 20', 22.5', 25' and 30'.
Case-IH 1020 Series Grain Head
Case-IH 1020 Grain Head Auger Trough Liner available for 15', 17.5', 20', 22.5', 25' and 30' platforms
Case-IH 1190
Case-IH 1190
Case-IH 1255
Case-IH 1440, 1460, 1640, 1660 (prior to S/N JJC0039550) - Side Hill Option
Case-IH 1490, 1590
Case-IH 1680 S/N JJC0047412 & up, 1688, 2188, 2377, 2388, 5877, 2588-Manual Adjust & Electric Adjust
Case-IH 2010, 2020
Orbit Trac II kit available for Case-IH 2010 and 2020.
Case-IH 2020 - 10-5/8" Long
Case-IH 2020 - S/N Before CBJ020001.Including all HAJ
Poly Skid Shoes available for 20', 25' and 30'.
Case-IH 2020 - S/N Before CBJ020001.Including all HAJ Replacement Parts
Case-IH 2020 - S/N CBJ020001 - CBJ020700
Poly Skid Shoes available for 25', 30' and 35'.
Case-IH 2020 - S/N CBJ020001 - CBJ020700 Replacement Parts
Case-IH 2020 - S/N CBJ020701 - CBJ021300
Poly Skid Shoes available for 20', 25' and 30'.
Case-IH 2020 - S/N CBJ020701 - CBJ021300 Replacement Parts
Case-IH 2020 - S/N CBJ021301 & Later, Y9ZL & YAZL
Poly Skid Shoes available for 20', 25', 30' and 35'.
Case-IH 2020 - S/N CBJ021301 & Later, Y9ZL & YAZL Replacement Parts
Case-IH 2020 Series Grain Head
Case-IH 2020 Grain Head Auger Trough Liner available for 20', 25', 30' and 35' platforms
CASE-IH 2042, 2052, 2062 Series
CASE-IH 2042, 2052, 2062 Series - Roller Guide Kit
Case-IH 2042/2052/2062 - 7-7/16" Long
Case-IH 2052 - After Serial #CCC0014710
Poly Skid Shoes available for 21', 25' 30', 36' and 39'.
Case-IH 2052 - Before Serial #CCC0014710
Poly Skid Shoes available for 21', 25', 30', 36' and 39'.
Case-IH 2062 - After Serial #CCC0015328
Poly Skid Shoes available for 30', 36' and 39'.
Case-IH 2062 - Before Serial #CCC0015328
Poly Skid Shoes available for 30' and 36'.
CASE-IH 2142, 2152 Series
CASE-IH 2142, 2152 Series - Roller Guide Kit
Case-IH 2142, 2152, 2162
Radura OEM Replacement Sectional Knife Assemblies for Case-IH 2142, 2152 and 2162 with a 3" Knife Sections. Available for 15', 20', 25', 30', 35', 40' and 45'. Also available in coarse or fine sections.
Case-IH 2142, 2152, 2162
CASE-IH 2162 Series
CASE-IH 2162 Series - Roller Guide Kit
Case-IH 2162/2152/2142
Poly Skid Shoes available for 30', 35', 40' and 45'.
Case-IH 2162/2152/2142 Replacement Parts
Case-IH 2200, 2400, 3200, 3400 Series Corn Head
Available for 4, 6, 8,12 and 16 row cornheads
Case-IH 2600, 4200, 4400 Series Corn Head
Available for 6, 8, 12 and 16 row cornheads
Case-IH 3016/3020/3152/3162 - 10-1/4" Long
Case-IH 3020
Poly Skid Shoes available for 20', 25', 30' and 35'.
Case-IH 3020
Orbit Trac II kit available for Case-IH 3020.
Case-IH 3020 Replacement Parts
Case-IH 3020, 3025, 3030, 3035
Case-IH 3152, 3162, 4152, 4162
Case-IH 3162/3152
Poly Skid Shoes available for 25', 30', 35', 40' and 45'.
Case-IH 3162/3152 Replacement Parts
CASE-IH 4000 Series
CASE-IH 4000 Series - Roller Guide Kit
Case-IH 4F30, 4F40, 4F45, 4R30, 4R35, 4R40, 4R45
Case-IH 5088, 6088, 7088, 5130, 6130, 7130 - Electric Adjust (In Cab)
Case-IH 800 Series Corn Head
Available for 4, 6, 8 and 12 row cornheads
Case-IH 8330
Case-IH 900, 1000 Series Corn Head
Available for 4, 6, 8 and 12 row cornheads
Case-IH 990
Case-IH Closing Wheels
Martin-Till’s Case-IH closing wheels replace the solid closing discs on Case-IH planters. Benefits include: Closing wheel arm pressure can be greatly reduced; Seeding depth does not have to be raised to ensure emergence
Case-IH Closing Wheels
Cast Closing Wheel
- Made of rugged, thick, cast iron
- Weight 45 pounds per row
Case-IH Cutter Bar
Please select if you are currently running the Case-IH cutter bar.
Case-IH DH213, DH253, DH303, DH363, DH403
Case-IH Magnum
Available for Case-IH Magnum 235, 260, 290, 315, 340 and 370.
Case-IH Magnum
Stalk Stompers for Tractors, Case-IH Magnum
Case-IH Quadtrac (2011 & Older)
Stalk Stompers for Tractors, Case-IH Quadtrac (2011 & Older)
Case-IH Quadtrac (2012 & Newer)
Stalk Stompers for Tractors, Case IH Quadtrac (2012 & Newer)
Case-IH Quadtrac 370, 420, 470, w/o Cast Bumper (2012 and Later)
Case-IH Quadtrac 450, 500, 540, 550, 580, 600, 620 (2012 and Later)
Case-IH Round Baler
Case-IH SC414
Case-IH Square Baler
Case-IH Steiger (2011 & Older)
Stalk Stompers for Tractors, Case IH Steiger (2011 & Older)
Case-IH Steiger (2012 & Newer)
Stalk Stompers for Tractors, Case IH Steiger (2011 & Older)
Case-IH Steiger 350, 370, 400, 420, 450, 470 (2012 and Newer)
Kits available with cast bumper and without cast bumper
Case-IH Steiger 500, 540, 550, 580, 600, 620 (2012 and Later)
Case-IH Steiger/Quadtrac 485, 535 (2011 and Earlier)
Case-IH/CNH/DMI
Case-IH/New Holland
Cast Closing Wheels
Cast Closing Wheel
- Made of rugged, thick, cast iron
- Weight 45 pounds per row
Caterpillar
SCH EasyCut Cutter Bar Conversion Kits for Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar/Lexion
May Wes UHMW poly Ear Savers for Caterpillar / Lexion
CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge Plus; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge XP; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge 5; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Premium Complete Flange Bushing Parallel Arms Kits
ExactEmerge; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
CCS/Mini-Hopper
CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
MaxEmerge 5; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
John Deere MaxEmerge XP
CCS/Mini-Hopper
CCS/Mini-Hopper
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge Plus; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge XP/CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 5; CCS/Mini-Hopper
CCS/Mini-Hopper
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits; John Deere ExactEmerge; CCS/Mini-Hopper
CFX750
Challenger
CHALLENGER 1842: RASSPE SINGLE KNOTTER, RS 6003, W/O CAM GEAR
CHALLENGER 2240: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2250: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2260: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2270XD: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER 2290: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
CHALLENGER SB44: RASSPE HD DOUBLE KNOTTER, RS 1450, W/ AND W/O CAM GEAR
Challenger
Unloading Auger Tubes for Challenger combines
Challenger
Radura Disc Mower Blades, Challenger
Challenger
Stalk Stompers for Tractors Kits, for Challenger models, includes mounting brackets, lift arm assemblies, shoe configuration and hydraulic hose kit.
Challenger
Challenger 700 Series
Will fit Challenger 700, 700B, 700C and 700D.
Challenger 700 Series
Stalk Stompers for Tractors, Challenger 700 Series
Challenger 700B Series
Stalk Stompers for Tractors, Challenger 700B Series
Challenger 700C Series
Stalk Stompers for Tractors, Challenger 700C Series
Challenger 700D Series
Stalk Stompers for Tractors, Challenger 700D Series
Challenger 800 Series
Stalk Stompers for Tractors, Challenger 800 Series
Challenger 800 Series
Challenger Round Baler
CIH 1010 Series
CIH 1010 Series - Roller Guide Kit
CIH 1020 Series
CIH 1020 Series - Roller Guide Kit
CIH 2020 Series
CIH 3020 Series
CIH 3020 Series - Roller Guide Kit
CIH 4000, 5000 Series
CIH 820 Series
CIH 820 Series - Roller Guide Kit
CIH 8230 Series
CIH 8340 Series
CIH 8360 Series
CIH 8370, 8830 Series
CIH 8380 Series
CIH 8840, 8870 Series
CIH HDX Series
Claas
Claas
Claas
Radura Rotary Disc Mower Blades for Claas
Claas
Claas
Claas Balers and Self-Propelled
Claas Convio
Duck Foot paddle tines available for 2017 and Newer Claas Convio
Claas G525, G530, F525, F530, F750, F900, S450-900
Claas MaxFlex, MaxFlo
Cleaner
BAC - Botanical Antimicrobial Cleaner
Closing Wheel Bracket Rebuild Kit
Cast Closing Wheel Bracket Repair Kit & Spring Hole Repair Bushing
John Deere, spring hole repair bushing; 11/16” repair
John Deere, cast closing wheel bracket; 1-11/16” repair kit
Closing Wheel Brackets
Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
Manufactured by S.I. Distributing, for accurate closing wheel angle for optimum closing.
Closing Wheel Brackets - Case-IH Planters
V-Closing Wheel Bracket Upgrade Kit - Bracket kit, to convert planter to v-closing wheels. Includes shim washers for spacing wheels to desired width.
Closing Wheel Brackets - John Deere & Kinze Planters
Manufactured by S.I. Distributing, for accurate closing wheel angle for optimum closing.
Closing Wheel Bracket Kits and Brackets for John Deere and Kinze Planters.
Closing Wheel Brackets - White Planters
Bracket kit, to convert planter to v-closing wheels. Includes shim washers for spacing wheels to desired width. Will only fit planters if H-bracket arm is straight and down pressure springs are on the inside.
Closing Wheels
Closing wheels include Finger-Till closing wheels, Martin-Till closing wheels, cast closing wheels and rubber closing wheels. Closing wheels are the last part of the planter that can affect the crop at planting. The wrong setup can negate all the proper placement and depth you have achieved. Closing wheels securely close the furrow and eliminate air pockets.
Closing Wheels
Drill Closing Wheels: 13" Spiked Spading Wheels and 20-Point Dimple Wheels for John Deere
Closing Wheels, for Drills
Martin-Till closing wheels, for drills, move soil toward the seed at planting depth, while lifting and fracturing the surface layer to achieve compaction-free closing of the seed trench in wet, hard or sod conditions. With soil firmed around the seed from each side and the surface layer loosened, crops emerge sooner and planting can be done at the proper depth, even in wetter conditions, without fear of crushed soil above the seed prevention emergence.
Closing Wheels, for Planters
Martin closing wheels, for planters, move soil toward the seed at planting depth, while lifting and fracturing the surface layer to achieve compaction-free closing of the seed trench in wet, hard or sod conditions. With soil firmed around the seed from each side and the surface layer loosened, crops emerge sooner and planting can be done at the proper depth, even in wetter conditions, without fear of crushed soil above the seed prevention emergence.
CM135, CM165, CM167, CM168, CM170, CM210, CM211, CM212, CM220
Dome Blade
CM215, 135, 164, 166, 167, 168, 170, 184, 210
Flat Blade
Combine Draper Platform
Combine Draper Platform
Combine Draper Platform
Combine Draper Platform
Combine Draper Platform
Combine Draper Platform
Combine Draper Platform - Roller Guide Kit
Combine Draper Platform - Roller Guide Kit
Combine Draper Platform - Roller Guide Kit
Combine Draper Platforms
Combine Draper Platforms
Combine Flex Draper Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Flex Platform - Roller Guide Kit
Combine Rigid Platform
Combine Rigid Platform
Combine Rigid Platform
Combine Rigid Platform
Combine Rigid Platform
Combine Rigid Platform
Combine Rigid Platform
Combine Rigid Platform - Roller Guide Kit
Combine Toolbox
The Combine Toolbox for your in-field quick fix, and maintenance needs. Mounts to the side of the combine for easy access.
Combine Toolbox
The Combine Toolbox for your in-field quick fix, and maintenance needs. Mounts to the side of the combine for easy access.
Combines
Compact Clean Ride (ACCR) Floating Row Cleaner
Compact Clean Ride (ACCR) Floating Row Cleaner
Improves planter performance with innovative cast parallel linkage design.
Complete Parallel Arm Kits - No Ream
These rebuild kits come with flange-bushing -installed parallel arms and shoulder-less bolts.
They are ideal for narrow row planters and econo-fold planters where clearance around support plates is exceptionally tight.
No reamers are needed for these kits.
Concaves
Concaves available for Case-IH, John Deere and New Holland combines.
Thrash Master Concave System
MAD Concaves™
Constrictor Wrap
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
Constrictor Wrap
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
Constrictor Wrap
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
Constrictor Wrap
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
Constrictor Wrap
Will fit hoses up to 5/8" in diameter.
Constrictor Wrap
The Constrictor Wrap, of the OutBack Wrap "The Snake Collection" will fit hoses up to 5/8" in diameter.
Copperhead Furrow Cruiser
The Copperhead Furrow Cruiser® finally solved the SIDEWALL COMPACTION problem that came with the development of the double disk opening system on modern planters.
Corn Heads
Cornhead Auger
Cornhead Augers available for Case-IH and John Deere cornheads
Cover Crops
Crary
Crop Dividers
CrownFx
Crownfx™ is for use on Small Grains and promotes root development, enhances root mass, and enlarges root area as well as increases seed head length, kernel counts and crude protein.
CrownFx
Crownfx™ is for use on Small Grains and promotes root development, enhances root mass, and enlarges root area as well as increases seed head length, kernel counts and crude protein.
Crustbuster
Disc Openers - Crustbuster - Drills and Air Seeders
CrustBuster
Rebounder Seed Deflectors for CrustBuster Drills
CrustBuster
Rebounder Seed Deflectors for CrustBuster Drills
C-Series
May Wes UHMW Poly Snout Savers for John Deere C-Series
Cupped Dimple Closing Wheel
Consider the Martin-Till Dual 13-inch Cupped Dimple Closing Wheel Set for medium moisture to dry conditions, and hard conditions. The 20 rounded points crumble sidewalls. It works well on high-speed planters, drills and seeders.
Cupped Dimple Closing Wheel
Consider the Martin-Till Dual 13-inch Cupped Dimple Closing Wheel Set for medium moisture to dry conditions, and hard conditions. The 20 rounded points crumble sidewalls. It works well on high-speed planters, drills and seeders.
Cupped Razor Closing Wheel
The Martin-Till Cupped Razor Closing Wheel works well in cover crops. 14 beveled razor style teeth crumble sidewalls, while cupped design squeezes trench closed.; 1/4” thick, heat-treated T-1 wheels, with 18 beveled razor teeth; Razor teeth break side while cupped design squeezes soil towards seed ensuring good seed to soil contact
• Works Well in Cover Crops • Prevents Wrapping • Shallow Planting Depths
Cupped Razor Closing Wheel
The Martin-Till Cupped Razor Closing Wheel works well in cover crops. 14 beveled razor style teeth crumble sidewalls, while cupped design squeezes trench closed.; 1/4” thick, heat-treated T-1 wheels, with 18 beveled razor teeth; Razor teeth break side while cupped design squeezes soil towards seed ensuring good seed to soil contact
CUSTOM HARNESS
M3 Monitor Custom Harness: We can supply you with a harness with any connections that are currently utilized in the planter/drill market. We can make a custom harness for a planter, splitter or drill. Please talk to our knowledgable staff to request a quote.
Cylinder Kit
Cylinder kit available for John Deere 50, 60/90 and Pro-Series drills. One required per row. Hydraulic valve kit sold separately.
top
C125 FLOATING 13" SPIKED ROW CLEANER C125 Floating 13 inch row cleaner cleaner is shown with optional treader wheels. Wheels can be operated in intersected (for no-till conditions), offset (for freshly worked soil or loose sandy conditions. Suitable for no-till. May be used behind certain forward mounted fertilizer openers) or retracted (if overall length is too long) position. Mounting bracket sold separately.
CIH V-CLOSING WHEEL KIT, BOLT-ON, 5/8"
Will fit Case-IH 800, 900 and 1200 series with original single press wheel to convert to v-closing wheels.
CLEAN SWEEP KIT, 12 ROW, W/ COMPRESSOR
Precision Planting Manual Clean Sweep air control kit for 12 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 16 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 16 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 23 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 23 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 24 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 24 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 31 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 31 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 32 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 32 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 36 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 36 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 48 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 48 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 54 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 48 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 6 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 6 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 8 ROW, W/ COMPRESSOR
Precision Planting Clean Sweep air control kit for 8 row planter. Includes compressor, power cables, air lines and air cylinders. Row cleaner mounting bracket sold separately.
CLOSING WHEEL, CAST IRON, ROLL PIN
Cast Iron closing wheel for a John Deere 7000, 7100 and Kinze 1993 & prior planters where closing wheels are attached with roll pin. Water pump style bearing. Price is each.
CLOSING WHEEL, FINGER-TILL, BOLT-ON, 5/8", M16
Finger-Till closing wheel for John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels. Includes the dust cap.
CLOSING WHEEL, YETTER TWISTER, POLY, BOLT-ON, 5/8", M16
Yetter Twister poly closing wheel for John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
CRP-10, 2-1/2" NO WINGS, LANDOLL WEATHERPROOFER, 2200, 2300, 1-1/8" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/8" shanks. Will fit Landoll WeatherProofer 2200, 2300 series.
CRP-24, 2-1/2" NO WINGS, M&W, SUNFLOWER, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit M&W Earthmaster 900, 1100, 1400, 1700, 1800, 2200, 2500 series; Sunflower 4213, 4233, 4412, 4511, 4530 series.
CRP-44, 2-1/2" NO WINGS, GREAT PLAINS, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series.
CRP-6, 2-1/2" NO WINGS, CASE-IH, DMI, KRAUSE DOMINATOR, SALFORD, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit 500, 527, 527B, 530, 530B, 690, 730, 870, 875 MRX 690, 930; Glencoe/White Coulter chisels CC4450 and White 435 and 445 with Deep Till Shanks; Kuhn/Krause Dominator; New Holland front shanks ST770, ST775, ST720, ST740; Salford 9700, 9800 series.
CRP-6B, 2-1/2" NO WINGS, BRILLION, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Brillion Land Commander 1 and 2.
CRP-77, 7" WING, BLU-JET, SALFORD, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit Blu Jet Subtillers, I, II and III; Salford 9200-series with straight shanks.
CRP-8, 2-1/2" NO WINGS, BAKER, JD, KRAUSE, P-K, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Baker/Laney inline and v-rippers; Bigham Brothers MegaTill Max Subsoilers; John Deere 510, 512, 955, 2700, 2720, 2730 Disc Rippers and 913, 915 V-rippers; Krause TL3000 & 4880 Land Builder; Missouri Machine/ Rome RVR and RSR Series Rippers.
CRP-9R, 2-1/2" NO WINGS, RAWSON (UNVERFERTH) ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit Rawson (Unverferth) Zonebuilder.
C125 BRACKET, CIH 800-1300, 28"
Will fit Case-IH 800, 900, 1200 and 1300 series planters with a no-till coulter to mount the C125 floating row cleaner assembly. Requires 28" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
CLEAN SWEEP KIT, 12 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 12 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 16 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 16 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 23 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 23 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 24 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 24 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 31 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 31 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 32 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 32 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 36 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 36 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 48 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 48 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 54 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 54 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately.
CLEAN SWEEP KIT, 6 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 6 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
CLEAN SWEEP KIT, 8 ROW, W/O COMPRESSOR
Precision Planting Clean Sweep air control kit for 8 row planter. Includes power cables, air lines and air cylinders. Compressor NOT included. Row cleaner mounting bracket sold separately,
CLOSING WHEEL, FINGER-TILL, M17 THREADED STUD BOLT
Finger-Till closing wheel John Deere planters with a 16.95 threaded spindle on closing wheel frame.
CRP-1, 7" WING, BAKER, DAMMER-DIKER, JD, KRAUSE, LANEY, P-K, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Baker/Laney inline and v-rippers; Bigham Brothers MegaTill Max Subsoilers; John Deere 510, 512, 955, 2700, 2720, 2730 Disc Rippers and 913, 915 V-rippers; Krause TL3000 & 4880 Land Builder; Missouri Machine/ Rome RVR and RSR Series Rippers.
CRP-13, 2-1/2" NO WINGS, BRILLION, 1" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1" shanks. Will fit subsoilers with 1" shank. Will NOT fit Brillion Land Commander.
CRP-17, 2-1/2" NO WINGS, CASE-IH, DMI, 1-1/2" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/2" shanks. Will fit 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.
CRP-26, 2-1/2" NO WINGS, SUNFLOWER, WILRICH, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Sunflower 4610, 4630, 4710, 4730 series; Wilrich SoilPro, 657 DCR/ripper.
CRP-44-7, 7" WING, GREAT PLAINS, 1-1/4" SHANK
Conservation ripper point with 7"wings. Available for 1-1/4" shanks. Will fit Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series.
CRP-50, 2-1/2" NO WINGS, LANDOLL WEATHERPROOFER, 2400, 1-1/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/4" shanks. Will fit Landoll WeatherProofer 2400 series.
CRP-710, 10" WING, BLU-JET, SALFORD, 1-1/2" SHANK
Conservation ripper point with 10" wings. Available for 1-1/2" shanks. Will fit Blu Jet Subtillers, I, II and III; Salford 9200-series with straight shanks.
CRP-9RW, 7" WING, RAWSON (UNVERFERTH) ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 7" wings. Available for 3/4" shanks. Will fit Rawson (Unverferth) Zonebuilder.
CRP-1-10, 10" WING, BAKER, DAMMER-DIKER, JD, KRAUSE, P-K, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Baker/Laney inline and v-rippers; Bigham Brothers MegaTill Max Subsoilers; John Deere 510, 512, 955, 2700, 2720, 2730 Disc Rippers and 913, 915 V-rippers; Krause TL3000 & 4880 Land Builder; Missouri Machine/ Rome RVR and RSR Series Rippers.
CRP-11, 7" WING, LANDOLL WEATHERPROOFER, 2200, 2300, 1-1/8" SHANK
Conservation ripper point with 7" wings. Available for 1-1/8" shanks. Will fit Landoll WeatherProofer 2200, 2300 series.
CRP-18, 2-1/2" NO WINGS, UNVERFERTH RIPPER/STRIPPER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit Unverferth 310, 330, 332 Ripper/Stripper.
CRP-2, 7" WING, CASE-IH, DMI, KRAUSE DOMINATOR, SALFORD, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit 500, 527, 527B, 530, 530B, 690, 730, 870, 875 MRX 690, 930; Glencoe/White Coulter chisels CC4450 and White 435 and 445 with Deep Till Shanks; Kuhn/Krause Dominator; New Holland front shanks ST770, ST775, ST720, ST740; Salford 9700, 9800 series.
CRP-2B, 7" WING, BRILLION, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Brillion Land Commander 1 and 2.
CRP-4, 7" WING, M&W, SUNFLOWER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit M&W Earthmaster 900, 1100, 1400, 1700, 1800, 2200, 2500 series; Sunflower 4213, 4233, 4412, 4511, 4530 series.
CRP-44-10, 10" WING, GREAT PLAINS, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Great Plains Verti-Till 4360/6360 & Turbo-Chisel TC 5-series.
CAM ADJUST, WA1360, ALL JD; KINZE W/O NTC
Optional cam dial depth adjustment for WA1360 row cleaners. Adjust depth in 1/4" increments. For all John Deere and Kinze without no-till coulters.
CLEAN SWEEP BRACKET, C125MTR, CIH, JD 7000, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Martin C125 with no-till coulter. Will fit John Deere 7000 and 7100; White 6000 and 8000 series; Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CRP-14, 7" WING, BRILLION, 1" SHANK
Conservation ripper point with 7" wings. Available for 1" shanks. Will fit subsoilers with 1" shank. Will NOT fit Brillion Land Commander.
CRP-25, 7" WING, UNVERFERTH RIPPER/STRIPPER, 3/4" SHANK
Conservation ripper point with 7" wings. Available for 3/4" shanks. Will fit Unverferth 310, 330, 332 Ripper/Stripper.
CRP-26-7, 7" WING, SUNFLOWER, WILRICH, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Sunflower 4610, 4630, 4710, 4730 series; Wilrich SoilPro, 657 DCR/ripper.
CRP-3, 7" WING, CASE-IH, DMI, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.
CRP-50-7, 7" WING, LANDOLL WEATHERPROOFER, 2400, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Landoll WeatherProofer 2400 series.
CLEAN SWEEP STOP KITS, JD 7200, 1700
Required on John Deere 7200 and 1700 series planters with long parallel arms and row unit mounted no-till coulter. NOTE: 1 required per row.
CRP-11-10, 10" WING, LANDOLL WEATHERPROOFER, 2200, 2300, 1-1/8" SHANK
Conservation ripper point with 10" wings. Available for 1-1/8" shanks. Will fit Landoll WeatherProofer 2200, 2300 series.
CRP-2-10, 10" WING, CASE IH, DMI, KRAUSE DOMINATOR, SALFORD, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit 500, 527, 527B, 530, 530B, 690, 730, 870, 875 MRX 690, 930; Glencoe/White Coulter chisels CC4450 and White 435 and 445 with Deep Till Shanks; Kuhn/Krause Dominator; New Holland front shanks ST770, ST775, ST720, ST740; Salford 9700, 9800 series.
CRP-2B-10, 10" WING, BRILLION, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Brillion Land Commander 1 and 2.
CRP-4-10, 10" WING, M&W, SUNFLOWER, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit M&W Earthmaster 900, 1100, 1400, 1700, 1800, 2200, 2500 series; Sunflower 4213, 4233, 4412, 4511, 4530 series.
CRP-60, 2-1/2" NO WINGS, UNVERFERTH ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit Unverferth 112, 122, 132 Zone-Builders.
CONVERSION PACKAGE, FIELD TRACKER
HCC002237 Conversion Package is required for all Case-IH 2144, 2166 and 2188 combines. For use with HCC002013 and HCC002015 Field Tracker kits.
CRP-14-10, 10" WING, BRILLION, 1" SHANK
Conservation ripper point with 10" wings. Available for 1" shanks. Will fit subsoilers with 1" shank. Will NOT fit Brillion Land Commander.
CRP-26-7, 10" WING, SUNFLOWER, WILRICH, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Sunflower 4610, 4630, 4710, 4730 series; Wilrich SoilPro, 657 DCR/ripper.
CRP-3-10, 10" WING, CASE-IH, DMI, 1-1/2" SHANK
Conservation ripper point with 10" wings. Available for 1-1/2" shanks. Will fit 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775.
CRP-50, 10" WING, LANDOLL WEATHERPROOFER, 2400, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Landoll WeatherProofer 2400 series.
CRP-60-7, 7" WINGS, UNVERFERTH ZONE-BUILDER, 3/4" SHANK
Conservation ripper point with 7" wings. Available for 3/4" shanks. Will fit Unverferth 112, 122, 132 Zone-Builders.
CLEAN SWEEP BRACKET, WA1360, BD, BK, BW, BCIH
Mounts the Clean Sweep cylinder to the row cleaner. For Martin 1360 without no-till coulter. Will fit John Deere 7000, 7200 and 1700 series; Kinze; White 6000 and 8000 series. NOTE: 1 required per row.
COTTER PIN, HUMPED
C125 BRACKET, JD 7000, KINZE, WHITE, 24-3/4"
Will fit John Deere 7000, 7100; Kinze 2000, 3000; White EARLY 6000 series with a no-till coulter to mount the C125 floating row cleaner assembly. (Will NOT fit Kinze OEM double arm no-till coulter.) Requires 24-3/4" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
CAP, SHORT, BD, AD, ADGA BLACK
MagnoJet, Cap for Standard Flat Fan Nozzles. Fits MagnoJet nozzles starting with MNJ20XXXX & MNJ22XXXX. Also fits TeeJet TP, XR, DG, TT, TTJ60, AIXR & OC Series tips. Also fits Hypro ULD, GA, LD, VP, TR, OC, R & E Series tips. Rubber seal sold separately.
CLOSING WHEEL BRACKET, JD 7000, 7100, ROLL PIN
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts roll pin style closing wheels.
CLEAN SWEEP BRACKET, YETTER 2967-035, JD 7000, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-035 on John Deere 7000and 7100; White 6000 and 8000 series. NOTE: 1 required per row.
CANOLA WIPER KIT, PRO-SERIES ESET
Canola wiper kit for Pro-Series eSet.
CLOSING WHEEL BRACKET, KINZE 93 & PRIOR, ROLL PIN
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits Kinze 1993 and before planters and accepts roll pin style closing wheels.
CANOLA WIPER KIT, STANDARD ESET
Canola wiper kit for standard eSet.
CAM ADJUST, WA1360, KINZE W/NTC
Optional cam dial depth adjustment for WA1360 row cleaners. Adjust depth in 1/4" increments. For Kinze with OEM no-till coulters.
CAP, LONG, AD-IA, AD-IA/D, ST-IA, TM-IA
MagnoJet, Cap for MagnoJet Air Inducted Nozzles. Protection without restricting air flow. Fits MagnoJet nozzles starting with MNJ21XXXX, MNJ31XXXX,MNJ41XXXX & MNJ51XXXX. Rubber seal sold separately.
CLOSING WHEEL BRACKET, KINZE 94 & NEWER, BOLT-ON
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits Kinze planters 1994 and newer and accepts bolt on style closing wheels.
CLOSING WHEEL BRACKET, JD 7000, 7100, BOLT-ON
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts bolt on style closing wheels.
C125 BRACKET, WHITE 8000, 24-3/4"
Will fit White 8000 series planters without a no-till coulter to mount the C125 floating row cleaner assembly. Requires 24-3/4" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
CAP, SHORT, AD/D, ST, MDC
MagnoJet, Cap for MagnoJet Air Inducted Nozzles. Fits MagnoJet nozzles starting with MNJ21XXXX, MNJ31XXXX,MNJ41XXXX & MNJ51XXXX. Rubber seal sold separately.
C125 BRACKET, JD 7200-1700, WHITE 9000, 24-3/4"
Will fit John Deere 7200, 7300, 1700 series and White 9000 series planters with no-till coulter to mount the C125 floating row cleaner assembly. Requires 24-3/4" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
C125 BRACKET, GREAT PLAINS PLANTER
Bracket for Great Plains Yield-Pro Planter, YP-1225 and YP-1625 with 30" single row spacing. Bracket is used for standard C125 row cleaners. There is enough room to install a UMO-100 if desired. Use UMO-MTG bracket.
CLOSING WHEEL BRACKET, JD 7200, 7300, 1700, BOLT-ON
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7200, 7300 & 1700 and accepts bolt on style closing wheels.
C-FLEX, 1" X 3", 3-HOLE, SMART-TILL
C-FLEX, 1" X 3", 4-HOLE, SMART-TILL
C125 BRACKET, JD 7200-1700, WHITE 9000, 19-5/16
Bracket for John Deere 7200-1700 and White 9000 series planters without no-till coulter to mount the C125 floating row cleaner assembly. Requires 19-5/16" of clearance from the face plate of the planter row unit forward. NOTE: One bracket per row.
C125 FLOATING 13" SPIKED ROW CLEANER, GREAT PLAINS TWIN ROW, RH
Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, RIGHTHAND, Includes single wheel row cleaner, mounting bracket & side treader wheel.
CAB CABLE, M3, CT, 12'
CAB CABLE, M3, DJ, 12'
CAM & DOWN PRESSURE KIT, C125
Optional cam adjustment for C125 row cleaners. Allows rapid adjustment of C125 units with twelve 1/4" increments. Hardware included, and Optional down pressure kit for C125 row cleaners. Provides extra down force for clearing heavier residue. Hardware included.
CAM ADJUST, C125
Optional cam adjustment for C125 row cleaners. Adjust depth in 1/4" increments.
CAM ADJUST, WA1345
Optional cam dial depth adjustment for WA1345 row cleaners. Adjust depth in 1/4" increments. For all John Deere and Kinze without no-till coulters.
CAMERA CABLE, 15'
Camera cable for VisionWorks camera systems.
CAMERA CABLE, 30'
Camera cable for VisionWorks camera systems.
CAMERA CABLE, 65'
65' camera cable for VisionWorks camera systems.
CAMERA KIT, 6R-SERIES, TRACTOR
Camera and 30 foot cable bundle for John Deere 6000R Series tractor with touch screen command center. Will require input harness VWC900026. Multiple cameras can be used depending on available OEM connectors.
CAMERA KIT, 7R, 8R, 9R SERIES TRACTOR; S-SERIES COMBINE; R4000, 400R, 600R SERIES SPRAYER
Camera and 30 foot cable bundle for John Deere S-series combines; John Deere late R4000, 400R, 600R-series sprayers; John Deere 7000R, 8000R and 9000R series tractor with touch screen command center or 2630/4640 (factory installed) display. Multiple cameras can be used depending on available OEM connectors.
CAMERA KIT, AG LEADER INTEGRA, VERSA, 4-PIN
Camera and 30 foot cable bundle for AG Leader Integra & Versa, 4-pin. Will require VWC900029. Can use up to 4 cameras.
CAMERA KIT, AG LEADER INTEGRA, VERSA, 5-PIN
Camera and 30 foot cable bundle for AG Leader In Command, 5-pin. Will require 4002671-12 or 4100816 from Ag Leader. Can use up to 4 cameras.
CAMERA KIT, AGCO C1000
Camera and 30 foot cable bundle for AGCO C1000. Will require AC-A1C from AGCO. Single camera use only.
CAMERA KIT, AGCO C2000
Camera and 30 foot cable bundle for AGCO C2000. Will require AC-A2C from AGCO. Can use up to 2 cameras.
CAMERA KIT, AGCO C2200, C3000
Camera and 30 foot cable bundle for AGCO C3000. Will require BUSB1-TC from AGCO. Can use up to 2 cameras.
CAMERA KIT, CIH PRO 1200
Camera and 30 foot cable bundle for Case-IH PR0 1200. Single camera use only.
CAMERA KIT, CIH PRO 700; NH INTELLVIEW III, IV
Camera and 30 foot cable bundle for Case-IH PR0 700 and New Holland Intelliview III and IV. Single camera use only.
CAMERA KIT, CIH PRO 700; NH INTELLVIEW III, IV
Camera and 30 foot cable bundle for Case-IH PR0 700 and New Holland Intelliview III and IV. Will require VWC900024. Can use up to 3 cameras.
CAMERA KIT, CIH, NH FM1000, XCN2050, FM750
Camera and 30 foot cable bundle for Case-IH and New Holland FM1000, XCN2050, FM750. Can use 1 to 4 cameras depending on model.
CAMERA KIT, CIH, NH, FLAGSHIP
Camera and adapter for 2014 through 2021 Flagship Case-IH 700 Pro and New Holland Intelliview IV monitor. PLUG AND GO Combines are pre wired to three locations. At the unloading auger, in the tank and at the back of the combine. You can install in just minutes.
CAMERA KIT, CIH, NH, FLAGSHIP, 2022 & NEWER
Camera and adapter for 2014 through 2021 Flagship Case-IH 700 Pro and New Holland Intelliview IV monitor. PLUG AND GO Combines are pre wired to three locations. At the unloading auger, in the tank and at the back of the combine. You can install in just minutes.
CAMERA KIT, CIH, NH; MIDRANGE
Camera and adaptor for 2014 and newer Midrange Case-IH combines. PLUG AND GO Combines are pre wired to three locations. At the unloading auger, in the tank and at the back of the combine. You can install in just minutes.
CAMERA KIT, CLAAS JAGUAR
Camera, 30 foot cable bundle and adapter for camera ready 2015 and newer Claas Jaguar 840 through 880 and 930 through 980 chopper. Pre-wired for 6 different locations.
CAMERA KIT, DATATRONIC 5, FIELDSTAR 5, NT03
Camera and 30 foot cable bundle for Datatronic 5, Fieldstar 5 and NT03 monitor. Connects to existing male s-video input on back of armrest.
CAMERA KIT, DATATRONIC 5, FIELDSTAR 5, NT03
Camera and 30 foot cable bundle for Datatronic 5, Fieldstar 5 and NT03 monitor. Connects to input on the display.
CAMERA KIT, FENDT TRACTORS
Camera and 30 foot cable bundle for Fendt tractors that are camera ready with Vairo terminals.
CAMERA KIT, JD 2630 W/O HARNESS
Camera and 30 foot cable bundle for John Deere combines and tractors with 2630 display. Will require VWC900023 for combines and VWC900022 for tractors. Can use up to 3 cameras.
CAMERA KIT, JD 4000R-SERIES SPRAYER
Camera and adaptor for early John Deere 4000R-series sprayers that are camera ready. Includes adapter that can accept two cameras. Connects to 6-pin connector behind panel under the back window.
CAMERA KIT, JD 4640 NON-FACTORY, COMBINE
Camera and 30 foot cable bundle for John Deere combines and tractors with 4640 display. Will require VWC900027 for combines and VWC900028 for tractors. Can use up to 4 cameras.
CAMERA KIT, JD S-SERIES COMBINE
Camera and adaptor for John Deere 2017 and newer camera ready combines. Multiple cameras can be used depending on available OEM connectors.
CAMERA KIT, LEXION
Camera, 30 foot cable bundle and adapter for Lexion 670 through 780 camera ready combines. Pre-wired for 6 different locations.
CAMERA KIT, OUTBACK MAX
Camera and 30 foot cable bundle for Outback Max. Will require 051-0285-000 from Outback. Can use up to 4 cameras.
CAMERA KIT, RAVEN VIPER 4
Camera and 30 foot cable bundle for Raven Viper 4. Will require VWC900031. Can use up to 4 cameras.
CAMERA KIT, RAVEN VIPER 4
Camera and 30 foot cable bundle for Raven Viper 4. Will require 115-0172-077 from Raven. Can use up to 4 cameras.
CAMERA KIT, TEEJET MATRIX PRO 570G, 840G
Camera and 30 foot cable bundle for TeeJet Matrix Pro 570G and 840G. Can use up to 8 cameras with TeeJet video selection module.
CAMERA KIT, TRIMBLE MX1000, TMX2050, CFX750
Camera and 30 foot cable bundle for Trimble FMX1000, TMX2050 and CFX750. Can use 1 to 4 cameras depending on model.
CAMERA, AHD, 120 DEGREE
120 degree (side view) high definition camera for VisionWorks camera systems. Cable sold seprately.
CAMERA, AHD, 170 DEGREE
170 degree (wide view) high definition camera for VisionWorks camera systems. Cable sold separately.
CAMERA, AHD, 90 DEGREE
90 degree high definition camera for VisionWorks standard camera systems. Cable sold seprately.
CAMERA, BATTERY POWERED, WIFI
Ready Vision battery operated WiFi camera. Transmit to any iOS or Android device. Requires no internet or cellular service. Real-Time video not guaranteed.
CAMERA, HD, WIRELESS, 140 DEGREE
High definition 140 degree wireless camera.
CAMERA, HD, WIRELESS, 90 DEGREE
High definition 90 degree wireless camera.
CAMERA, PAL, 90 DEGREE
Camera and 30 foot cable bundle for Trimble FMX1000, TMX2050 and CFX750. Can use 1 to 4 cameras depending on model.
CAMERA, SD, 120 DEGREE, SIDE VIEW
120 degree (side view) standard definition camera for VisionWorks camera systems.
CAMERA, SD, 140 DEGREE
140 degree (wide view) standard definition camera for VisionWorks camera systems. Cable sold separately.
CAMERA, SD, 90 DEGREE
90 degree standard definition camera for VisionWorks camera systems. Cable sold seprately.
CAMERA, SD, WIRELESS
High resolution camera for VisionWorks wireless camera systems.
CAMERA, WIRED, HD, WIFI
Ready Vision heavy duty WiFi camera. Transmit to any iOS or Android device. Requires no internet or cellular service. 12V constant power supply. Real-Time video not guaranteed.
CAP, SHORT, BD, AD, ADGA, WHITE
MagnoJet, Cap for Standard Flat Fan Nozzles. Fits MagnoJet nozzles starting with MNJ20XXXX & MNJ22XXXX. Also fits TeeJet TP, XR, DG, TT, TTJ60, AIXR & OC Series tips. Also fits Hypro ULD, GA, LD, VP, TR, OC, R & E Series tips. Rubber seal sold separately.
CBLT, 1/2-13 X 2 GR8-PLTD
CBLT, M10-1.5 X 40 CL8.8-PLTD
CBLT, M10-1.5 X 45 CL8.8-PLTD
CBLT, M10-1.5 X 45 CL8.8-PLTD, SPECIAL SHOULDER; MACDON
Carriage bolt, M10-1.5 X 45 GR8.8-PLTD, for SCH MacDon skid plates.
CBLT, M10-1.5 X 50 CL8.8-PLTD
CBLT, M10-1.5 X 55 CL8.8-PLTD
CENTER SKID SHOE ASSEMBLY, CIH, MACDON, NH, 14 X 16
Case-IH 2162/2152/2142; MacDon FD75/FD70/D60/D50; New Holland 86C/83C/82C- Center Skid Shoe Assembly- 14"x16" - 3/8" Thick - Predrilled. Not included in kits. Please order separately.
CHAIN GUIDE, POLY, 3 HOLE, JD 4400, 4420, 6600, 6620, 7700, 7720, 8800, 8820
4 Row Auger Trough Liner for Case-IH 2200, 2400, 3200 and 3400 series; New Holland 96C, 96D, 98C and 98D series cornheads with 30" rows.
CHARCOAL, BASQUES, 17.6 LBS BAG
Sugar maple hardwood lump charcoal made from 100% Canadian hardwood logs. Offers a unique sweet sugar maple flavor given by the sugar maple tree. A hardwood that gives a higher intense heat. Lights quickly and last longer. The choice of chefs.
CIH RUNNER, OEM, RECONDITIONED, GEN 1, GREASEABLE WB
Reconditioned OEM replacement greaseable wobble box runner for Generation I 1010, 1020 headers. Required with serial numbers JJC0215000 and lower.
CIH RUNNER, OEM, RECONDITIONED, GEN 2, EARLY OIL BATH WB
Reconditioned OEM replacement oil bath wobble box runner for Generation II 1010, 1020 headers. Required with serial numbers JJC0215001-JJC0323604.
CIH RUNNER, OEM, RECONDITIONED, GEN 3, LATE OIL BATH WB
Reconditioned OEM replacement oil bath wobble box runner for Generation III 1010, 1020 headers. Required with serial numbers JJC0323605 and up; CBJ023001 and up.
CLEAN SWEEP AIR CYLINDER
Clean Sweep Air Cylinder. One is required for each row cleaner.
CLEAN SWEEP AIR LINE KIT, 48-ROW
Clean Sweep Air Line Kit for a 48-row planter. Supplies air from compressor to the air cylinder. NOTE: Only 1 required per planter.
CLEAN SWEEP AIR LINE KIT, 54-ROW
Clean Sweep Air Line Kit for a 48-row planter. Supplies air from compressor to the air cylinder. NOTE: Only 1 required per planter.
CLEAN SWEEP BRACKET, C125MTR, JD 7200, 1700
Mounts the Clean Sweep cylinder to the row cleaner. For Martin C125 with no-till coulter. Will fit John Deere 7200 and 1700 series. PPM726530 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, C125MTS, CIH, JD, KINZE, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Martin C125 without no-till coulter. Will fit John Deere 7000, 7100, 7200 and 1700 series; Kinze; White 6000 and 8000 series; Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, KINZE RC/NTC, 2000, 3000
Mounts the Clean Sweep cylinder to the row cleaner. For Kinze OEM 2000, 3000 series OEM row cleaner/no-till coulter combo.
CLEAN SWEEP BRACKET, KINZE RC/NTC, 4900
Mounts the Clean Sweep cylinder to the row cleaner. For Kinze OEM 4900 series OEM row cleaner/no-till coulter combo.
CLEAN SWEEP BRACKET, WA1360, BDC
Mounts the Clean Sweep cylinder to the row cleaner. For Martin 1360 with no-till coulter. Will fit John Deere 7200 and 1700 series. PPM726530 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-007, JD 7200, 1700
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-007 on John Deere 7200, 7300 and 1700 series; Kinze. PPM755202 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-013, JD, KINZE, WHITE, NARROW ROW
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 15, 20 and 22" rows; model 2967-013 on John Deere 7000, 7100; Kinze; White 6000 and 8000 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-014, CASE-IH, NARROW ROW
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 15, 20 and 22" rows; model 2967-014 on Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-029, JD, KINZE, WHITE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 30 and 40" rows; model 2967-029 on John Deere 7000, 7100; Kinze; White 6000, 8000 and 9000 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-035, JD 7000, 7200, 1700, KZ, WHITE, SHORT BRKT
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-035 with short bracket on John Deere 7000, 7100, 7200, 7300 and 1700 series; Kinze; White 6000 and 8000 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-035, JD 7200, 1700; KINZE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-035 on John Deere 7200, 7300 and 1700 series; Kinze. PPM755202 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-042, 043, 042A, 043A, JD 7200, 1700
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter no-till coulter and floating row cleaner combo; model Titan 2967-042 and 2967-043 on John Deere 7200, 7300 and 1700 series. PPM755202 is required on John Deere 7200 and 1700 series planters for each row with long parallel arms. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-097, CASE-IH
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter short, pin adjust, floating residue manager for 30 and 40" rows; model 2967-097 on Case-IH 800, 900 and 1200 series. NOTE: 1 required per row.
CLEAN SWEEP BRACKET, YETTER 2967-115, JD 7000, 7200, 1700, KINZE
Mounts the Clean Sweep cylinder to the row cleaner. For Yetter residue manager on Yetter 2960-127 no-till coulter; model Titan 2967-115 on John Deere 7000, 7100, 7200, 7300 and 1700 series; Kinze. NOTE: 1 required per row.
CLEAN SWEEP CONTROL KIT, W/O COMPRESSOR
Includes controller for planters that have the 20/20 Airforce installed. A Mounting Kit is NOT required. NOTE: Only 1 required per planter.
CLEAN SWEEP PIN KIT, YETTER 2967-013A, 2967-014A, 2967-029A, 2967-097A, 2016-
Mounts the Clean Sweep cylinder to the row cleaner. One is required for each row cleaner. Kit includes cylinder pins and hardware only. Required with Yetter 2967-013A, 2967-14A, 2967-029A, 2967-097A.
CLIP, WOOD BAT STEEL TINE
Clip for Steel tine on wood bat reel. Tines sold sold separately.
CLOSING WHEEL BRACKET, JD 7000, 7100, NARROW, ROLL PIN
V-Closing Wheel Bracket with Cast "T" handle, Heavy duty spring, Eccentric bushings & Hardened hex step bushings. Fits JD 7000 & 7100 and accepts roll pin style closing wheels. The spacing between the closing wheels will be 3/4" to 1" instead of the standard 1-1/4".
CLOSING WHEEL KIT, CIH 2000 SERIES
Case-IH 9" Camber Adjust Closing Kit for Case-IH 2000 series planters. Changes the angle of Case-IH standard stance to v-style gathering action. Packer wheel and razor wheels sold separately.
CLOSING WHEEL, CAST IRON, BOLT-ON, 5/8", M16
Cast Iron closing wheel for Kinze 1994 & newer, White 6000, 8000 and 9000 series planters that use 5/8" or 16mm bolt to attach closing wheels. Bearing ID of 5/8". Price is each.
CLOSING WHEEL, FCRUSHER, BOLT-ON, 5/8", M16
fCrusher cast closing wheel for Case-IH, John Deere, Kinze and White planters that use a 5/8" or 16mm bolt to attach closing wheels.
CLOSING WHEEL, FINGER-TILL, ROLL PIN
Finger-Till closing wheel for John Deere, Kinze and White planters where closing wheels are attached with roll pin. Water pump style bearing.
CLOSING WHEEL, INSERT, POLY, YETTER TWISTER, BOLT-ON, 5/8", M16
Yetter closing wheel insert for factory 1" x 12" poly closing wheel assemblies. Inlcludes two poly spike rings only.
CLOSING WHEEL, RUBBER, BOLT-ON, 5/8", M16
Rubber closing wheel for John Deere MaxEmerge Plus, Pro, XP, XP Pro and MaxEmerge 5; John Deere 1530 and 1535 drills; Kinze 1994 & newer; White 6000, 8000 and 9000; Case-IH SDX30 and SDX40 air drills; Monosem plus model planters. Replaces John Deere AA39968; Kinze GA6434; White 854262; Case-IH 87695406; Monosem 7071.N. This rubber closing wheel is used on planters that use the 5/8" bolt to attached closing wheels. Bearing ID of 5/8".
CLOSING WHEEL, RUBBER, BOLT-ON, M17
Rubber closing wheel for John Deere 7200, 7300 and 1700 series planter and John Deere 455, 750 and 1520 drills with a 17mm threaded spindle on closing wheel frame. Bearing ID of 17mm. Replaces John Deere AA43898 and AA34211.
CLOSING WHEEL, RUBBER, ROLL PIN
Rubber closing wheel for John Deere 7000, 7100 planters, John Deere 515, 520 drills, Kinze 1993 & prior planters and Monosem early model planters where closing wheels are attached with roll pin. Water pump style bearing. Replaces John Deere AA43899, Kinze GA3086 and Monosem 7074.
CONCAVE KIT, MAD, CIH 1680, 1688, 2188, 2388, 2588, 7088, 7130, 7140
MAD Concave available for Case-IH 1680, 1688, 2188, 2388, 2588, 7088, 7130 and 7140. Compatible with the following crops: wheat, flax, durum, canola, peas, corn, soybeans, barley and oats. Includes two split frames, one transition lip, two .225 inserts, two .375 inserts, two right hand finger grate inserts, and two left hand finger grate inserts.
CONCAVE KIT, MAD, CIH 1680, 1688, 2188, 2388, 2588, 7088, 7130, 7140
MAD Concave available for Case-IH 1680, 16MAD Concave available for Case-IH 1680, 1688, 2188, 2388, 2588, 7088, 7130 and 7140. Compatible with the following crops: canola, peas, barley and oats.
CONCAVE KIT, MAD, CIH 1680, 1688, 2188, 2388, 2588, 7088, 7130, 7140
MAD Concave available for Case-IH 1680, 1688, 2188, 2388, 2588, 7088, 7130 and 7140. Compatible with the following crops: wheat, flax and durum. Includes two split frames, one transition lip, two .225 inserts, and two .375 inserts.
CONCAVE KIT, MAD, CIH, FLAGSHIP, 2004 & NEWER
MAD Concave available for Case-IH 2004 & newer Flagship. Compatible with the following crops: hard thresh wheat, flax, easy thresh wheat, barley, soybeans, canola, peas and corn. Includes one right hand .225 insert, one left hand .225 insert, one right hand .300 insert, one left hand .300 insert, one right hand .375 insert, one left hand .375 insert, two right hand finger grate inserts, and two left hand finger grate inserts.
CONCAVE KIT, MAD, CIH, FLAGSHIP, 2004 & NEWER
MAD Concave available for Case-IH 2004 & newer Flagship. Compatible with the following crops: barley, soybeans, canola, peas and corn. Includes one right hand .375 insert, one left hand .375 insert, two right hand finger grate inserts, and two left hand finger grate inserts.
CONCAVE KIT, MAD, JD STS, S-SERIES
MAD Concave available for John Deere 9650 STS, 9760 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS; S650, S660, S670, S680, S690
S760, S770, S780, S790. Compatible with the following crops: canola, peas, soybeans, barley and oats. Includes two split frames, one transition lip, two .375 inserts, one right hand finger grate insert, one left hand finger grate insert, and one 1-piece .435 concave.
CONCAVE KIT, MAD, JD STS, S-SERIES
MAD Concave available for John Deere 9650 STS, 9760 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS; S650, S660, S670, S680, S690
S760, S770, S780, S790. Compatible with the following crops: wheat and cereals. Includes two split frames, one transition lip, two .225 inserts, two .375 inserts, and one 1-piece .435 concave.
CONCAVE KIT, MAD, JD X9
MAD Concave available for John Deere X9. Compatible with the following crops: wheat and flax. Includes six .225 inserts, and six .435 inserts.
CONCAVE KIT, MAD, JD X9
MAD Concave available for John Deere X9. Compatible with the following crops: canola, barley, oats.
CONCAVE KIT, MAD, JD X9
MAD Concave available for John Deere X9. Compatible with the following crops: canola, barley, oats, wheat, flax.
CONCAVE KIT, MAD, NH
MAD Concave available for New Holland with 22" rotor. Compatible with the following crops: hard thresh wheat, flax, corn, barley, soybeans, canola and peas. Includes two frames, two .225 inserts, two .375 inserts, two .300 extensions, two .500 extensions, and four finger grate inserts.
CONCAVE KIT, MAD, NH
MAD Concave available for New Holland with 22" rotor. Compatible with the following crops: corn. Includes two frames, two .500 extensions, and four finger grate inserts.
CONCAVE KIT, MAD, NH
MAD Concave available for New Holland with 22" rotor. Compatible with the following crops: corn, barley, soybeans, canola and peas. Includes two frames, two .375 inserts, two .300 extensions, two .500 extensions, and four finger grate inserts.
CONCAVE, THRASHMASTER, CIH 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010
Thrash Master Concave System for all crops. Will fit Case-IH Flagship 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010.
CONCAVE, THRASHMASTER, JD 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690
Thrash Master Concave System for corn and soybeans only. Will fit John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690.
CONCAVE, THRASHMASTER, JD 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690
Thrash Master Concave System for all crops. Will fit John Deere 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, 9870STS, S660, S670, S680, S690.
CONCAVE, THRASMASTER, CIH 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010
Thrash Master Concave System for corn and soybeans only. Will fit Case-IH 7010, 7120, 7130, 7230, 7240, 8010, 8120, 8130, 8230, 8240, 9120, 9130, 9230, AFX8010.
CONNECTOR KIT, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 14SPI
OEM connector kit with 3 fine tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system.
CONNECTOR KIT, CIH 2142, 2152, 2162; MACDON D50, D60, D65, FD70, FD75, 7SPI
OEM connector kit with 3 coarse tooth sections for Case-IH 2142, 2152, 2162 and MacDon D50, D60, D65, FD70 and FD75 with 3" cutting system.
CONNECTOR KIT, JD 600F, 600FD, 700FD, 900D, 14SPI
OEM connector kit with 3 fine tooth sections for John Deere 600 series auger platforms, 600 and 700 series flex draper platforms and 900 series draper platforms with 4" cutting system.
CONNECTOR KIT, JD 600F, 600FD, 700FD, 900D, 7SPI
OEM connector kit with 3 coarse tooth sections for John Deere 600 series auger platforms, 600 and 700 series flex draper platforms and 900 series draper platforms with 4" cutting system.
CONNECTOR, CENTER, FEMALE, SINGLE
Female connector for HCC Gateway.
CONNECTOR, CENTER, LONG, SINGLE
Long center connector for HCC Gateway.
CONNECTOR, CENTER, MALE, SINGLE
Male connector for HCC Gateway.
CONNECTOR, CENTER, SHORT, SINGLE
Short center connector for HCC Gateway.
CONNECTOR, END, LH, SINGLE
Left hand end connector for HCC Gateway.
CONNECTOR, END, RH, SINGLE
Right hand end connector for HCC Gateway.
CONTROLLER, CLEAN SWEEP
CORNHEAD AUGER, CIH 900/1000 SERIES, 6R, NARROW
Cornhead auger for Case-IH 900 and 1000 series 6 row narrow cornhead.
CORNHEAD AUGER, CIH 900/1000 SERIES, 8R, NARROW
Cornhead auger for Case-IH 900 and 1000 series 8 row narrow cornhead.
CORNHEAD AUGER, JD 693
Cornhead auger for John Deere 693, 22" pitch. Will work with serial number 670451 and higher.
CORNHEAD AUGER, JD 893
Cornhead auger for John Deere 893, 22" pitch. Will work with serial number 670051 and higher.
COVER, PRECISION METER, JD 7000, KINZE 2000
Black plastic cover for John Deere 7000, 7100 and Kinze 2000 series Precision meters.
CROP DIVIDERS W/ MARKER RODS, PAIR, JD 900F, 600F, 600D, 600FD
Pair of row dividers with marker rods for John Deere 900F, 600F, 600D, 600FD grain platforms.
CROP DIVIDERS W/ MARKER RODS, PAIR, CIH 1020
Pair of row dividers with marker rods for Case-IH 1020 grain platform.
CROP DIVIDERS W/O MARKER RODS, PAIR, CIH 1020
Pair of row dividers without marker rods for Case-IH 1020 grain platform.
CROP DIVIDERS, W/O MARKER RODS, PAIR, JD 900F, 600F, 600D, 600FD
Pair of row dividers without marker rods for John Deere 900F, 600F, 600D, 600FD grain platforms.
CROWNFX SC, CASE OF 4
CrownFx, seed coating, is applied at 2oz/cwt. One case contains 4 x 1 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
CROWNFX, FOLIAR, CASE OF 2
CrownFx, Foliar application, is applied at 16oz/cwt. One case contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
CROWNFX, FOLIAR, SINGLE
CrownFx, Foliar application, is applied at 16oz/cwt. Contains 1 x 2.5 gallon jug. This product is a biological. Any returns require pre-approval due to shelf life.
CROWNFX, SEED COAT, SINGLE
CrownFx, seed coating, is applied at 2oz/cwt. Contains 1 x 1 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
CRP-12, 7" WING, CALDWELL GRABER, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit SH Series and Graber subsoilers.
CRP-15, 7" WING, KOENIG, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2 shanks. Will fit Koenig DWK-series.
CRP-15N, 2-1/2" NO WINGS, KOENIG, 1-1/2" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/2 shanks. Will fit Koenig DWK-series.
CRP-16, 7" WING, LANEY, 1-1/2" SHANK
Conservation ripper point with 7" wings. Available for 1-1/2" shanks. Will fit Laney Extra Heavy Duty Plow.
CRP-19, 7" WING, WORKSAVER V-RIPPER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Worksave R-130 V-Ripper.
CRP-20, 2-1/2" NO WINGS, BRILLION ST-30 RIPPER STRIPPER, 3/4" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 3/4" shanks. Will fit ST-30 Ripper Stripper.
CRP-21, 2-1/2" NO WINGS, ALLIS #9, 1-1/8" SHANK
Conservation ripper point with 2-1/2" (no wings). Available for 1-1/8" shanks. Will fit Allis #9 Subsoiler.
CRP-28, 7" WING, DAMMER-DIKER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Dammer-Diker Tillage Master.
CRP-34, 7" WING, BESLER, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Besler 4000 series.
CRP-37, 7" WING, ORTHMAN, QUINSTAR, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Orthman, Quinstar SoilShark.
CRP-9, 7" WING, BRENT EARTHQUAKE & CPC, 1-1/4" SHANK
Conservation ripper point with 7" wings. Available for 1-1/4" shanks. Will fit Brent Earthquake and CPC.
CRP-9-10, 10" WING, BRENT EARTHQUAKE & CPC, 1-1/4" SHANK
Conservation ripper point with 10" wings. Available for 1-1/4" shanks. Will fit Brent Earthquake and CPC.
CUP HOLDER MOUNT
This popular cup holder mount inserts into your cup holder and expands for a solid hold and gives you a conveient, out of the way, place to mount a 5" or 7" Visionworks monitor and doubles as a great cell phone holder. No more monitors in your windshield.
CUTTERBAR SKID SHOE, CIH, MACDON, NH
Cutterbar skid shoe available for Case-IH 2052 (after s/n CCC0014710), 2062 (after s/n CC0015328), 2142, 2152, 2162; MacDon 973 and 974 (2006 & newer), D50, D60, FD70, FD75, D125, D130, D135, D140, D145, FD130, FD135, FD140, FD145; New Holland 84C (after serial number PPP001119), 82C, 83C, 86C. Only compatible with OEM cutting system.
CUTTING FLUID, 16 OZ
BruteLube multi-purpose cutting and tapping fluid. Speciality formulated to extend tool life and reduce chip welding.
CYLINDER BRACKET, WA1360, UMO-100, LH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1360 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, LH. NOTE: One required per row.
CYLINDER BRACKET, WA1360, UMO-100, RH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1360 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, RH. NOTE: One required per row.
CYLINDER TOP BRACKET, WA1345, UMO-100, LH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1345 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, RH. NOTE: One required per row.
CYLINDER TOP BRACKET, WA1345, UMO-100, RH
Mounts the Smart Clean or Clean Sweep cylinder to the WA1345 row cleaner. Will fit Case-IH 1200, 1300 series; John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000, 3000, 4900 series; White 6000, 8000, 9000 series with single or dual UMO-100, LH. NOTE: One required per row.
top
top
