S.I. Distributing Inc.: Radura OEM Replacement Sections

Harvesting
Harvesting
- SCH EasyCut Cutting System
  SCH EasyCut Cutting System
  Cutting system, for most Combines, Swathers & Mower Conditioners. High Quality, Effective and Efficient
- SCH Pro-Drive Knife Drives
  SCH Pro-Drive Knife Drives
  The SCH Pro-Drive high performance knife drive in conjunction with the uniquely simple SCH cutterbar system achieve cutting performances that had never been considered possible in the past, particularly in the case of self-propelled harvesters.
- Orbit Reel Kits
  Orbit Reel Kits
  Eliminating the Reel - Auger Gap
  The revolutionary, patent-pending design of the Orbit Reel is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
- Gateway Sieves & Chaffers
  Gateway Sieves & Chaffers
  Tested and refined over several harvest seasons by high-hour combine users.
  The Gateway, HCC’s NEW sieve and chaffer system, is significantly lighter than standard sieves and chaffers found on current combines. The patented design utilizes aluminum and plastic construction for lower frame weight.That reduces wear and tear on cleaning shoe bushings and bearings, extends their life, and reduces combine downtime.
- Reel Finger Tines (OEM and Specialty)
  Reel Finger Tines (OEM and Specialty)
  High performance tines for short or sparse crops. The Paddle is a proven tine replacement system that offers true high performance at harvest time. When crop conditions make harvesting difficult and inefficient, the Paddle is the cost-effective alternative to standard tines.
- Harvest Products, Miscellaneous
  Harvest Products, Miscellaneous
  Plastic Wear Blocks, ect.
- Complete Orbit Trac II Reel
  Complete Orbit Trac II Reel
  For Combines and Swathers - Smoother crop flow, less downtime and superior component strength.
- Field Tracker
  Field Tracker
  Field Tracker allows headers to follow the ground contour, independent of the combine, by automatically tilting from side to side in response to terrain changes. This can greatly increase recovery of the low growing crops, like soybeans when you're harvesting hillsides. Field Tracker kits are available for Case-IH combines.
- HCC Flip Reel Kit
  HCC Flip Reel Kit
  The Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in canola and other tall, stringy crops. Installation is easy and can be done on equipment you already own. Designed as a retro-fit for all HCC tube-type reels built since 1990. ML 4-1/2" tine spacing or Level II 6" tine spacings are designed to work with the Flip Reel Kit. You can install it yourself in just a few hours using the Installation Instruction Manual.
- OEM Replacement Parts
  OEM Replacement Parts
  Rasspe OEM replacement knife assemblies are sectional so they can be shipped by UPS. Same high quality parts as original equipment knife assemblies. Includes all hardware for assembly. We also have Rasspe OEM replacement guards and sections available.
- Poly Skid Shoes
  Poly Skid Shoes
  Run your head closer to the ground without pushing and piling soil and you will put more crop in the combine even in wet sticky conditions. Poly Skid Shoes are sold in complete kits to outfit an enitre grain head or as individual replacement parts.
- Retractable Poly Fingers
  Retractable Poly Fingers
  Keep your auger feeding smoothly and efficiently. The May Wes Poly Retractable Fingers are an ideal alternative to metal fingers because they are far less damaging when a metal finger breaks and is fed through the combine. Unlike metal, broken poly will disintegrate before causing equipment damage.
- SCH Croplifters
  SCH Croplifters
  SCH Croplifters for OEM guards, SCH EasyCut I and SCH EasyCut II guards.
- SCH Pro Flex Lifter
  SCH Pro Flex Lifter
  Schumacher pulse crop lifters combine simple design with durability for your easy pulse crop harvest. With the specifically designed slot, the PRO FLEX LIFTER can fit perfectly on most types of guards. That's why the SCH pulse lifter guarantees a tight fit.
- Stalk Stompers
  Stalk Stompers
  Stalk Stompers available for John Deere, Case-IH, New Holland, Drago, Geringhoff Northstar, Geringhoff, Horizon, Lexion, AGCO, Harvestec, Fantini and Capello cornheads. Tractor stalk stompers available for Case-IH, Challenger, John Deere and New Holland.
- Tailboard Trash Blower
  Tailboard Trash Blower
  A metal tube that installs on end of fan exhaust above chopper or power tailboard. Blows off dust and trash that builds up on the tailboard. Fits John Deere S-Series combines; S550, S650, S660, S670, S680, S690.
Planting
Planting
- Acra-Plant
  Acra-Plant
  Specializes in No-Till & Reduced-Tillage planting and drilling equipment, fertilizer application tools, and chisel plow tools.
- Acre Plus Seed Box Toppers
  Acre Plus Seed Box Toppers
  Acre Plus Seed Box topper, are color matched injected molded plastic Seed Box extentions that fits the original seed box and use existing seed box lid. Adds one bushel to seed box capacity.
- Air Design Scrapers
  Air Design Scrapers
  Save time, labor and money. The Air Design scraper will outlast and outwear standard planter scrapers. The scraper features a special tungsten carbide cutting edge. You'll get superior performance and reduce tedious replacement chores.
- Bullseye Seed Tubes
  Bullseye Seed Tubes
  Bullseye Seed Tubes
- CleanSweep
  CleanSweep
  Setting row cleaners is a pain. CleanSweep lets you do it from your cab.
- Closing Wheels
  Closing Wheels
  Closing wheels including cast closing wheel, Close-N-Till wheels, Finger-Till closing wheels and Rubber closing wheels.
- Depth-A-Matic
  Depth-A-Matic
  Replaces the original depth stop and allows the depth gauge wheels to follow the ground terrain allowing the planter unit to travel smoothly in all field conditions. Fits John Deere & Kinze planters.
- Down Pressure Spring Package
  Down Pressure Spring Package
  This Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range.
- eFlow, 80/20 MIX, 8 LB
  eFlow, 80/20 MIX, 8 LB
  This special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow improves the flow of seed from the hopper to the meter.
- eSet
  eSet
  eSet - Every Seed, Every Time. The eSet meter:
  
  ·         Best-in-class singulation
  
  ·         Outstanding reliability
  
  ·         Easy to maintain
  
  ·         Easy to use
- Gauge Wheel Arm Kits
  Gauge Wheel Arm Kits
  Original, Field Tested And Proven Quick-Adjusting Gauge Wheel Arm Replacement Kits With O-Ring Grease Seals
- Gauge Wheel Assemblies
  Gauge Wheel Assemblies
  Gauge Wheel Assemblies available for John Deere planters, John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
- Gauge Wheel Tires
  Gauge Wheel Tires
  Gauge Wheel Tires for Case-IH planters, Case-IH air drills, John Deere planters, John Deere drills, Kinze planters, New Holland planters and White planters.
- John Deere Seed Boots
  John Deere Seed Boots
  Replacement Seed Boots for John Deere 750,1560,1565 & 1860 drills
- Keeton Seed Firmers & Accessories
  Keeton Seed Firmers & Accessories
  Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence and test show a average increase of up to six bushels per acre.
- M3 Monitor System
  M3 Monitor System
  Population Monitor for Planters and Grain Drills. We can also supply you with a custom harness built specifically for your planter or drill.
- Martin Planting Attachments
  Martin Planting Attachments
  Martin Planting Attachments including, Floating Row Cleaners, Fixed Row Cleaners, Fertilizer Opener, Spading Closing Wheels & Drag Chains.
- Miscellaneous Planter Parts
  Miscellaneous Planter Parts
  Graphite, Kinze Brush Meter Adapter, etc.
- MudSmith Gauge Wheel Assemblies
  MudSmith Gauge Wheel Assemblies
  Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings. Widths of 4" for conventional planters, 3" for no-till and high speed planters, 2.5" for no-till and twin row planters.
- One Wrench
  One Wrench
  Adjust John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench
- Parallel Linkage
  Parallel Linkage
  Replace worn bushing in parrallel linkage for John Deere and Kinze Planters.
- Planter Replacement Parts
  Planter Replacement Parts
- Precision Meters
  Precision Meters
  Precision Meters & Parts.
- Prescription Tillage Technology
  Prescription Tillage Technology
  PTT has invented a unique saber tooth planter disc opener to eliminate the
  need for a leading no-till coulter assembly and to facilitate closing of the seed furrow with standard OEM equipment. The disc opener design allows them to break down the side wall as the disc opener leaves the trench. The disc openers will leave 1/4” of granulated soil on top of the seed even in wet harsh conditions to get better seed to soil contact with less sidewall compaction.
- SI Belt Meter
  SI Belt Meter
  The SI Belt Meter will singulate the seed and maintain an accurate population control over a wide range of seed sizes. (2,000 to 4,000 actual seeds per pound). Now you can plant the seed population per acre you choose without guessing or adjusting your drill each time that you change seed sizes.
- Tractor Stalk Stompers
  Tractor Stalk Stompers
- Trail Jet
  Trail Jet
  Applies Liquid Fertilizer Behind the Planter
- Trash Guard
  Trash Guard
  Keep your V-Closing wheels free of old stalks, lumps of soil and other field debris.
- V-Closing Wheel Brackets
  V-Closing Wheel Brackets
  Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
- Venhuizen Accuvac Kit
  Venhuizen Accuvac Kit
  The Original 40-Cell flat corn plate with improved singulator and seed guide.
- WaveVision
  WaveVision
  The Only Sensor That Can Tell Seeds From Dust. OPTICAL SENSORS ARE EASILY FOOLED. Revolutionary WaveVision doesn’t use optics. This sensor-seed tube combination uses high-frequency waves to look at falling objects from every angle.
Tillage
Tillage
- Smart - Till
  Smart - Till
Spraying
Spraying
- MagnoJet
  MagnoJet
  A complete line of Ceramic spray nozzles at affordable prices.
Other Products
Other Products
- The Sure Stop
  The Sure Stop
  Get it right the first time! Grain handling alignment sensor.
- Ergo Hitch
  Ergo Hitch
  Ergo hitch is the self-aligning, automatically locking hitch that will change the way you think about towing. Originally and specifically designed for SAFETY when hooking grain and hay wagons to your tractor or truck, the Ergo-Hitch will become the most versatile hitch system on the market.
- Lockease Hitch Pins
  Lockease Hitch Pins
- Montezuma Tool Boxes
  Montezuma Tool Boxes
  Tool storage so advanced you will feel as though you are working in the future.
- PRO Chute
  PRO Chute
  EMPTY YOUR SEED BOXES DIRECTLY INTO YOUR PLANTER. Quick attach for safe unloading.
- Propel Sliding Door
  Propel Sliding Door
  Automate Your Sliding Shed Doors? Propel makes life easier. You have a remote for your garage door. Why not for your machine shed, horse barn or shop doors?
- Schuck Cushion Hitches & Bumpers
  Schuck Cushion Hitches & Bumpers
- Swift Hitch
  Swift Hitch
- Swift Tail Lights
  Swift Tail Lights
- The PostBoxx
  The PostBoxx
Online Specials
Online Specials

BOX OF 25, OEM SECTION, AGCO, 7SPI

Product ID: SCP011003

Box of 25, AGCO coarse section, 7 serrations per inch. Fits AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250 and Challenger. Replaces AGCO 71135135 riveted section and 71348175 bolt-on section.

More...

Price: $34.95

[Read Reviews] [Write A Review]

[Add to Wishlist]

BOX OF 25, OEM SECTION, AGCO, 10SPI

Product ID: SCP011001

Box of 25, AGCO fine section, 10 serrations per inch. Fits AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250 and Challenger. Replaces AGCO 71135135 riveted section and 71348175 bolt-on section.

More...

Price: $34.95

[Add to Wishlist]

BOX OF 25, OEM SECTION, JD 3", 7SPI

Product ID: RSP010992

Box of 25, John Deere 3" coarse section, 7 serrations per inch. Will fit John Deere 200 and 900 series with 3" cutting system. Coarse sections are recommended for soybeans and alfalfa.

More...

Price: $29.25

[Add to Wishlist]

BOX OF 25, OEM SECTION, JD 3", 11SPI

Product ID: RSP080017

Box of 25, John Deere 3" fine section, 11 serrations per inch. Will fit John Deere 200 and 900 series with 3" cutting system. Fine sections are recommended for wheat and grasses.

More...

Price: $29.25

[Add to Wishlist]

BOX OF 25, OEM SECTION, JD 4", PLATED, 7SPI

Product ID: RSP080010

Box of 25, John Deere 4" coarse sections (7-SPI) with zinc plating finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600 flex draper with 4" cutting system. Coarse sections are recommended for soybeans and alfalfa.

More...

Price: $56.25

[Add to Wishlist]

BOX OF 25, OEM SECTION, JD 4", PLATED, 14SPI

Product ID: RSP080011

Box of 25, John Deere 4" fine sections (14-SPI) with zinc plating finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600 flex draper with 4" cutting system. Fine sections are recommended for wheat and grasses.

More...

Price: $56.25

[Add to Wishlist]

BOX OF 25, OEM SECTION, JD 4", UNPLATED, 7SPI

Product ID: RSP080012

Box of 25, John Deere 4" coarse sections (7-SPI) with an oil finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600 flex draper with 4" cutting system. Coarse sections are recommended for soybeans and alfalfa.

More...

Price: $45.95

[Add to Wishlist]

BOX OF 25, OEM SECTION, JD 4", UNPLATED, 14SPI

Product ID: RSP080013

Box of 25, John Deere 4" fine sections (14-SPI) with an oil finish. Fits John Deere 900 draper, 600 draper, 600 flex & rigid, and 600 flex draper with 4" cutting system. Fine sections are recommended for wheat and grasses.

More...

Price: $45.95

[Add to Wishlist]

BOX OF 25, OEM SECTION, NH, 7SPI

Product ID: SCP011007

Box of 25, New Holland coarse section, 7 serrations per inch. Replaces New Holland 848091.

More...

Price: $34.95

[Add to Wishlist]

BOX OF 25, OEM SECTION, NH, 10SPI

Product ID: SCP011005

Box of 25, New Holland fine section, 10 serrations per inch. Replaces New Holland 848091.

More...

Price: $34.95

[Add to Wishlist]

BOX OF 25, OEM SECTION, CIH, 9SPI

Product ID: RSP080140

Box of 25, Case-IH section, 9 serrations per inch. Fits Case-IH 820, 1010, 1020, 2010 and 2020 plaftorms.

More...

Price: $29.25

[Add to Wishlist]

BOX OF 25, OEM SECTION, NH, 10SPI

Product ID: RSP041822

Box of 25, New Holland section, 10 serrations per inch. Fits New Holland 1112, 1114, 1116 and 1118.

More...

Price: $29.95

[Add to Wishlist]

BOX OF 25, OEM SECTION, CIH, MACDON, NH, 7SPI

Product ID: RSP041830

Box of 25, Case-IH, MacDon and New Holland section, 7 serrations per inch. Will fit Case-IH 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C.

More...

Price: $31.50

[Add to Wishlist]

BOX OF 25, OEM SECTION, CIH, MACDON, NH, 14SPI

Product ID: RSP041826

Box of 25, Case-IH, MacDon and New Holland section, 14 serrations per inch. Will fit Case-IH 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162; MacDon 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75; New Holland 84C, 86C

More...

Price: $31.50

[Add to Wishlist]

BOX OF 25, OEM SECTION, CIH 3020, 3152, 3162; NH 740CF, 840CD, 880CF, 10SPI

Product ID: RSP054340

Box of 25, Case-IH & New Holland section, 10 serrations per inch. Fits Case-IH 3020, 3152, 3162 and New Holland 740CF, 840CD, 880CF platforms.

More...

Price: $34.95

[Add to Wishlist]