The following is a list of all the Categories, Products and Feature Articles on our site. We hope it will assist you in finding what you're looking for.
| #'s | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All |
Categories
WA1345
Narrow 45-degree frame, ideal for high-speed planting or narrow rows
-
CHU44C cast hubs and long life PEER SEEDXTREME 5205 double row bearing with 6 lip seal
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
Water Pump Style Bearing (Roll Pin)
SUPER SPONGE WEED WIPER: Super Sponge Weed Wipers’ pump-fed sponges hold and put more material on undesired weeds, without drift.
SPONGE GUN - AG & LANDSCAPING APPLICATION Super Sponge
RED WEEDER & SPONGE DAUBER - Home & Garden Weed Control - Apply drift free, even on a windy day
SUPER SPONGE WEED WIPERS - Cost Effective Weed Control with NO Drift
Great for Glyphosate-Resistant Weeds and Non-GMO Applications
Drift Free • Use Less Chemical • Target taller growing resistant weeds.
Re-distribute Weight from Center of Planter to Wings
The Martin-Till Weight Transfer System addresses this weight problem by redistributing excess weight from the center of the planter to the wings. Keeping the wings level and the row units in the ground will keep planting depth consistent through changing conditions.
Disc Openers for White
TRAIL JET FERTILIZER OPENER - WHITE
Keeton Seed Firmers for White Planters, including Quick Attach, Universal and Seed Tube Mount brackets
WA1345 row cleaner for White 6000, 8000, 9000 series
Rebounder Seed Deflectors - White Planters
Rebounder Seed Deflectors for White Planters
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for White 5000, 6000, 8000 and 9000 series planters
PPS PREMIUM COMPLETE FLANGE BUSHING KITS WITH PARALLEL ARMS - WHITE
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms
White 6000, 8000 and 9000 series
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for White 9000 series
VisionWorks Standard and High-Definition Wired Camera Systems are high-resolution, durable, and affordable camera systems, which carry a three-year camera warranty.
VisionWorks' Wireless Camera Systems are high-resolution, durable, and affordable camera systems, which carry a three-year camera warranty.
Wood Bat Reels Replacement Tines
Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” ( 114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine.
Products
WA1332 PIN ADJUST 13" SPIKED ROW CLEANER
Pin-adjust row cleaner, 1-½” stem, 13” wheels. Wheels can run in intersected (for use in firm soil conditions and severe residue), offset (for moderate residue and freshly tilled soil) or retracted (for behind certain frame mounted coulters) position. Mounting Bracket sold separately.
WA1334 PIN ADJUST 13" SPIKED ROW CLEANER, 2"
Pin-adjust row cleaner, 2” stem for Case-IH planters, 13” wheels. Mounting Bracket sold separately.
ATV Mount 5 ft. (pump fed) (sprayer not included.)
This is our 5 ft. sprayer boom kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
TOP CROP 5 ft. kit (pump fed) Build your own boom. Comes with manifold and tubing (Requires a sprayer tank/pump with 1.4 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WA1532 PIN ADJUST 15" SPIKED ROW CLEANER
Pin-adjust row cleaner, 1-½” stem, 15” wheels. Wheels can only run in intersected (most aggressive) position. Mounting bracket sold separately.
This is our 10 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
This is our 15 ft. sprayer boom kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
This is our 20 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
This is our 30 ft. self-propelled kit that can eaThis is our 30 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
This is our 60 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
This is our 80 ft. sprayer boom kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
This is our 90 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
WEED WIPER, SPRAYER BOOM, 100'
This is our 100 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
WA BRACKET, CIH 800-900 SERIES, 2" STEM
Case-IH 800, 900 series without heavy duty down pressure springs, accepts 2” stem wheel assemblies.For use on Case IH 800, 900, 950 series WITHOUT heavy duty down pressure springs. Additional mounting kit required for early 800 series planters.
WA BRACKET, CIH 1200, 1300 SERIES, 2" STEM
Case-IH 1200, 1300 series, accepts 2” stem wheel assemblies.Accepts 2" stem MRT001334 wheel assemblies. For use on Case IH 1200, 1250 and 1300 series planters.
WA BRACKET, WHITE 5000 SERIES, 1-1/2" STEM
White 5100 series, accepts 1-½” stem wheel assemblies.Accpets 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For White 5100 series.
WA1320 PIN ADJUST 13" SPIKED ROW CLEANER
Pin-adjust row cleaner, narrow row, 1-½” stem, 13” wheels. Should only be used in minimum residue conditions to move clods. Not recommended in no-till. Gauge wheel arm equalizers (Depth-A-Matics) are recommended to reduce row unit bounce caused by gauge wheels encountering varying amounts of residue. Mounting Bracket sold separately.
WA BRACKET, WHITE 6000 SERIES, 1-1/2" STEM
White EARLY 6000 series with HEAVY duty down pressure springs, accepts 1-½” stem wheel assemblies. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For use on White early 6000 series with HEAVY duty down pressure springs.Top holes on early 6000 series must be 9-1/2" center to center. White early 6000 series with REGULAR duty down pressure springs require MRT002000 mounts.
WA BRACKET, WHITE 6000, 8000 SERIES, 1-1/2" STEM
White LATE 6000 series and all 8000 series, accepts 1-½” stem wheel assemblies. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For use on late White 6000 series and all White 8000 series. Top holes on late 6000 series must be 9" center to center.
WA BRACKET, DEUTZ-ALLIS, 1-1/2" STEM
Deutz-Allis Quadra Disk, Landoll, accepts 1-½” stem wheel assemblies.Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For Deutz AC Quadra Disk and Landoll.
Optional wheel weight. Two required per row. Adds weight to floating row cleaners. For use when planting in extremely hard soil conditions. Weight 4 lbs. each. Fit 4-bolt hubs.
WA BRACKET, JD, KINZE, WHITE 6000, 9000, 1-1/2" STEM
John Deere, Kinze and White EARLY 6000 series with REGULAR down pressure springs, accepts 1-½" stem wheel assemblies. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320. For all John Deere MaxEmerge; Kinze; White early 6000 series with REGULAR down pressure springs. Top holes on early 6000 series must be 9-1/2" center to center. White early 6000 series with HEAVY duty down pressure springs require MRT000610 mounts.
WA BRACKET, KINZE 4900, 1-1/2" STEM
Kinze 4900 series planters without pneumatic down pressure. Accepts 1-1/2" stem wheel assemblies MRT001532, MRT001332 and MRT001320.
Wear Plate for AGCO Series 3, 300, 400, 500, 800, 8000 and 9250; Case-IH 810, 820, 1010 and 1020.
Wear plate for John Deere 200 series. One used on drive end.
Wear plate for John Deere 200 and 900 series.
2 Degree angled closing wheel bracket. Increases aggressiveness of spading and dimple closing wheels. Fits late model Deere planters with bolt-on closing wheels.
2 Degree angled closing wheel bracket. Increases aggressiveness of spading and dimple closing wheels. Fits Kinze planters with bolt-on clos-ing wheels.
WEED WIPER, 3 POINT HITCH, 10'
3 pt. hitch mount 10 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 15'
3 pt. hitch mount 15 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 20'
3 pt. hitch mount 20 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 25'
3 pt. hitch mount 25 ft. (INCLUDES TANK AND PUMP) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, 3 POINT HITCH, 30'
NEW 30 ft. 3 pt. hitch mount Weed Wiper. This kit comes with a tank and pump. Our 30 ft. unit has a 10 ft. center and two 10 ft. wings that fold back for for road position. Attach our 3-point hitch model to your selected tractor and start wiping! WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
ATV 10 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
ATV 15 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
Front Bucket 10 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
Front Bucket 10 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
Front Bucket 20 ft. (pump fed) (sprayer not included.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
10 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
15 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
20 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
New 25 ft. pull-type weed wiper. Our pull-type units include a tank and pump for your application convenience. This particular unit has a 5' tool bar & 2 10' wings, making it easily transportable on a standard 16' trailer. The sponge boom height can be adjusted from 2" to 42" above the ground. WIPE OUT TALLER GROWING
30 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
40 ft. pull-type (INCLUDES TANK AND PUMP). WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
WEED WIPER, SPRAYER BOOM, 120'
This is our 120 ft. self-propelled kit that can easily be mounted to your existing spray boom! Each 30" sponge section has a seperate feed tube that adapts directly to the closest TeeJet or Hypro nozzle body. Nozzle body caps are also included to shut down any tip that is not feeding a sponge section. The special brakets, U-bolts, and risors allow you to easily attach the sponges to your boom quickly. The brackets also allow you to remove the sponges quickly without taking off the U-bolts. Bottom line...you can quickly convert your sprayer into a weed wiper and eliminate taller growing weeds with very little chemical.
TOP CROP 10 ft. kit (pump fed) Build your own boom. Comes with manifold and tubing. (Requires a sprayer tank/pump with 1.4 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
TOP CROP 15 ft. kit (pump fed) Build your own boom. Comes with manifold and tubing. (Requires a sprayer tank/pump with 1.8 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
TOP CROP 20 ft. kit (pump fed.) Mounts to any spray boom tool bar. (Requires a sprayer tank/pump with 3 GPM min.) WIPE OUT TALLER GROWING WEEDS WITH NO DRIFT.
This is our 30 ft. pump fed Top Crop kit that you can mount to any spray boom tool bar. This particular kit requires a sprayer tank/pump with 3 GPM minimum.
This is our 40 ft. pump fed Top Crop kit that you can mount to any spray boom tool bar. This particular kit requires a sprayer tank/pump with 3 GPM minimum.
WEIGHT TRANSFER, CIH 1255, 24R
Hydraulic Frame Weight Distribution System available for Case-IH 1255. Will ONLY fit 24 row planters.
WEIGHT TRANSFER, HARVEST INTERNATIONAL 16R
Hydraulic Frame Weight Distribution System available for Harvest International Laser Pro 1 with John Deere 1770/1175 toolbar. Will ONLY fit 12 or 16 row planters.
WEIGHT TRANSFER, JD 1770, 1775, 12R (2022 & PRIOR)
Hydraulic Frame Weight Distribution System available for John Deere 1770 and 1775. Will ONLY fit 12 row 2022 and prior planters.
WEIGHT TRANSFER, JD 1770, 1775, 16R (2022 & PRIOR)
Hydraulic Frame Weight Distribution System available for John Deere 1770 and 1775. Will ONLY fit 16 row planters 2022 and prior.
WEIGHT TRANSFER, JD 1770, 1775, 24R
Hydraulic Frame Weight Distribution System available for John Deere 1770 and 1775. Will ONLY fit 24 row planters.
WEIGHT TRANSFER, JD 1775, 12R (2023 & NEWER)
Hydraulic Frame Weight Distribution System available for John Deere 1775. Will ONLY fit 12 row 2023 and newer planters.
WEIGHT TRANSFER, JD 1775, 16R (2023 & NEWER)
Hydraulic Frame Weight Distribution System available for John Deere 1775. Will ONLY fit 16 row 2023 and newer planters.
WEIGHT TRANSFER, JD 1790, 16/31R, 16/32R
Hydraulic Frame Weight Distribution System available for John Deere 1790. Will ONLY fit 16/31 or 16/32-row planters.
WEIGHT TRANSFER, JD 1790, 1795, 16/31R, 16/32R
Hydraulic Frame Weight Distribution System available for John Deere 1790, 1795. Will ONLY fit 16/31 or 16/32-row planters.
Hydraulic Frame Weight Distribution System available for John Deere 1790. Will ONLY fit 24-row planters.
Hydraulic Frame Weight Distribution System available for John Deere DB60.
Optional wheel weight. Two required per row. Adds weight to floating row cleaners. For use when planting in extremely hard soil conditions. Weight 4 lbs. each. Fit 3-bolt hubs.
Feature Articles
top