- Leak Resistant Dual EPDM O-Rings
- Chemical Resistant Polypropylene
- NSF Standard 58 Certified
- 150 psi @ 70ºF
- 60 psi @ 140ºF
- For Use with Plastic or Soft Metal Tubing
Mur-lok Fitting Installation Instructions
1. MAKE A CLEAN TUBE CUT
Cut the tube squarely and if using plastic tubing, ensure that the cut has not make the tube out of round. Also ensure that the tube has a smooth outside diameter without any burrs or score marks prior to inserting it into the fitting.
2. INSERT TUBE INTO FITTING
Push the tubing through the collet and dual o-rings until it bottoms out against the tube stop. The collet holds the tube in place and the dual o-rings provide a leak resistant seal.
3. TEST AND INSPECT
Push and pull the tubing toward and away from the fitting to ensure that it has been installed properly. Test & inspect for any leaks.