Planters

Planters
- Acra-Plant
  
  Acra-Plant
  
  Acra-Plant specializes in no-till & reduced-tillage planting.
  
  Acra-Plant products include: Notched Disc Openers, V-Slice Inserts and V-Shots, Fertilizer Knives, Quick Change Fertilizer Knives and Blu-Jet Parts.
- Air Control
  
  Air Control
  
  Setting row cleaners is a pain. CleanSweep is a dual air cylinder that lets you set and adjust your row cleaners’ down pressure from the cab.
- Bullseye Seed Tubes
  
  Bullseye Seed Tubes
  
  Bullseye Seed Tubes: Reduce seed tube bounce; Reduce excessive wear; Feature a long life with the tungsten-carbide tip; Feature a smooth path to the trench
- Closing Wheel Brackets
  
  Closing Wheel Brackets
  
  Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
  
  Manufactured by S.I. Distributing, for accurate closing wheel angle for optimum closing.
- Closing Wheels
  
  Closing Wheels
  
  Closing wheels include Finger-Till closing wheels, Martin-Till closing wheels, cast closing wheels and rubber closing wheels. Closing wheels are the last part of the planter that can affect the crop at planting. The wrong setup can negate all the proper placement and depth you have achieved. Closing wheels securely close the furrow and eliminate air pockets.
- Disc Openers
  
  Disc Openers
  
  Wearparts seed disc openers, with Forges De Niaux blades and PEER bearings, feature improved life with sharp cutting-edge retention due to high hardness. Available for Case-IH, Great Plains, Kinze, John Deere and White
- DUST & Terraysm + DUST
  
  DUST & Terraysm + DUST
  
  Soy-protein DUST is a healthier, safer and cleaner seed and mechancal lubricant and as a replacement to graphite and talc.
  
  Terrasym® 401 + DUST™for soybeans and Terrasym® 450 + DUST™for corn are designed to deliver improved nutrient uptake leading to robust early season root development, enhanced tolerance of abiotic stress throughout the growing season, and higher yields at harvest.
- eFlow / Dispenser Lid
  
  eFlow / Dispenser Lid
  
  e-Flow is a special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow also improves the flow of seed from the hopper to the meter. The eFlow dispenser lid is a measuring lid that fits the 8-lb eFlow jug.
- Finger-Till Cast Closing Wheels
  
  Finger-Till Cast Closing Wheels
  
  S.I. Distributing's Finger-Till Closing Wheel crumble sidewalls and close the furrow for optimum seed-to-soil contact. The side fins provide depth control and fine-tune the soil.
- Gauge Wheels and Assemblies
  
  Gauge Wheels and Assemblies
  
  Gauge wheel arms, assemblies and tires available for John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
- Keeton Seed Firmers and Accessories
  
  Keeton Seed Firmers and Accessories
  
  Keeton Seed Firmers gently press every seed into the bottom of the trench to place it firmly into the soil, to improve seed-to-soil contact.
  
  Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence, and tests show, an average increase of six bushels per acre.
- M3 Monitor System
  
  M3 Monitor System
  
  Population Monitor for Planters and Grain Drills. The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. We can also supply you with a custom harness built specifically for your planter or drill.
- Martin-Till Planting Attachments
  
  Martin-Till Planting Attachments
  
  Martin-Till planter attachments make it possible for you to plant into higher levels of residue and moisture. Martin-Till Planting Attachments include: Floating Row Cleaners, Fixed Row Cleaners, Fertilizer Opener, Spading Closing Wheels & Drag Chains.
- Miscellaneous Planter Parts
  
  Miscellaneous Planter Parts
  
  The Kinze Brush Meter Adapter is a conversion kit to adapt to Kinze Brush-Type Seed Meter to fit a John Deere 7200, 7300 and 1700 Series Finger Pick-Up Seed Box.
  
  Graphite 1-lb and 5-lb containers - Used in all belt meter kits.
- Norseman Gauge Wheel Arm Kits
  
  Norseman Gauge Wheel Arm Kits
  
  Cast replacement arms, from Norseman, feature the industry-standard 5203KYY2 sealed bearing. This double-roller bearing stays tight and withstands the abuse, unlike the OEM threaded bushings. The Norseman gauge wheel arms that are distributed by S.I. Distributing are made in the USA, with the same standard of excellence.
- Outback Wrap Hydraulic Hose Markers, Hose Tamers
  
  Outback Wrap Hydraulic Hose Markers, Hose Tamers
  
  Outback Wrap Hydraulic Hose Markers are a "one-size-fits-all" identification wrap for hydraulic hoses that are 1/4" to 1-1/2". Outback Wrap Hose Tamers are multiple-hose containment wraps that tame up to 14 hoses!
- Parallel Linkage
  
  Parallel Linkage
  
  Replace worn parallel arms and bushings in parrallel linkage for John Deere and Kinze Planters.
- Parallel Linkage Arms Rebuild Kits - PPS Flange Bushing
  
  Parallel Linkage Arms Rebuild Kits - PPS Flange Bushing
  
  The PPS Flange Bushing Rebuild Kits will eliminate ALL areas of unwanted movement in the parallel linkage arms. This two-bushing system collectively prolongs overall wear life and eliminates wear in the parallel arm holes, resulting in less planter maintenance, providing long- term cost reductions. PPS Rebuild Kits are available in Complete Parallel Arms Kits (Premium and No-Ream) and Rebuild-Your-Existing-Arms Kits.
- Planter Parts
  
  Planter Parts
  
  Products include: Acres Plus Seed Box Toppers, Air Design Scrapers, Depth-A-Matic, Down Pressure Spring Package, Seed Tube Guard, Trail Jet and the Trash Guard
- Precision Finger Pickup Meters
  
  Precision Finger Pickup Meters
  
  Precision Meters & Parts. Because the components all mesh perfectly, Precision Meters hold one seed at a time, then release it. They’re engineered and built to do it again and again. You’ll see fewer skips and doubles – and higher yield.
- Rebounder Seed Deflectors
  
  Rebounder Seed Deflectors
  
  Rebounder seed deflectors funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce, resulting in seeds being flipped on top of the soil.
- Seed Right Seed Plates
  
  Seed Right Seed Plates
  
  Use Your Planter for Planting Cover Crops and Small Grains!
  
  Now distributed through S.I. Distributing, these proven seed plates allow growers with John Deere, Precision Planting, and Kinze vacuum meters the flexibility to accurately plant cover crops and small grains. These include wheat, oats, cereal rye, turnips, radishes, crimson clover and more.
- Set-N-Seed
  
  Set-N-Seed
  
  Set-N-Seed is a planter seed depth calibration tool designed to accurately and efficiently set the desired depth from 1" to 2.5" using a 1" main block and multiple 1/2" stackable inserts.
- Spoked Gauge Wheel Assemblies
  
  Spoked Gauge Wheel Assemblies
  
  Spoked gauge wheel assemblies available for Case-IH, Great Plains, John Deere, Kinze, Monsom and White.
- Vacuum Meters - eSet and AccuVac Kits
  
  Vacuum Meters - eSet and AccuVac Kits
  
  The Precision Planting eSet Meter is a retrofit system that goes inside of a John Deere vacuum meter and uses a flat disk without cells that are sensitive to seed size and shape, paired with a floating singulator that doesn’t need adjustments. You simply set your vacuum, fill the planter with seed, and go.
- Valion Seed Tube Guards
  
  Valion Seed Tube Guards
  
  Exapta Valion seed tube guards will eliminate seed tube wear and greatly reduce blade flex to create a properly shaped furrow and improved planting depth control. These guards are perfect for no-till or high-wear conditions, or anyone who is simply tired of replacing seed tube guards so often.

NOTE: Norseman Conical Scraper Rings are at the bottom of this page.

NORSEMAN ROLLER BEARING GAUGE WHEEL ARM KITS

These gauge wheel arm kits WILL OUTLAST any gauge wheel arm on the market today!

These Norseman cast replacement arms feature the industry-standard sealed bearing. This double-roller bearing stays tight and withstands the abuse, unlike the OEM threaded bushings.

“Try a row” ... purchase a Norseman Roller Bearing Gauge Wheel Arm Kit (includes two arms) for a single row to see how it performs in your fields.

-------------------------------------------------------

Prevent the Build-Up of Mud and Trash

The shape of the Norseman Roller Bearing Gauge Wheel Arm prevents the build-up of mud and trash compared to the OEM arm.

---------------------------------------------------------
AUSTRALIAN QUALITY/REPUTATION - MADE IN USA

Since 1980, Norseman is a family owned and operated company in Australia, with a reputation of manufacturing high-quality, longer-lasting planter replacement parts. The Norseman gauge wheel arms that are distributed by S.I. Distributing are made in the USA, with the same standard of excellence.

Norseman Gauge Wheel Arm Kits (includes two arms) are available for John Deere XP, XP Pro, MaxEmerge 5 and ExactEmerge; as well as Harvest International LaserPro.

---------------------------------------------------------------------------------------

VIDEO: This video explains the advantages of Norseman Gauge Wheel Arm Kit and demonstrates why the shape of the Norseman Gauge Wheel Arm prevents the build-up of mud/trash compared to the OEM arm.

NORSEMAN CONICAL SCRAPER RINGS

Clean opener blades produce a well-defined seed trench.

• Its conical profile keeps the scraper ring securely mounted and maintains optimal angle of attack to clean mud from disc opener blades.

• Use in conjunction with the Norseman Roller bearing gauge wheel arms to dramatically reduce maintenance intervals.

• Unique mounting method allows flex to avoid mud build-up.

• Prevent premature tire wear.

NORSEMAN GAUGE WHEEL ARM KIT, JD XP, ME5, EE; HARVEST INTERNATIONAL

Product ID: NMI226000

Norseman Gauge Wheel Arm kit for John Deere MaxEmerge XP, XP Pro, MaxEmerge 5, ExactEmerge, John Deere 1530, 1535 drills with XP row units, Harvest International, and Norseman planters. Includes 2 arms and hardware to bolt the arms to row unit and to bolt the gauge wheels to arms for one row. Rotary disc scrapers are NOT compatible with Norseman arms. Will NOT fit Harvest International Laser Pro row units.

More...

Price: $159.00

[Read Reviews] [Write A Review]

[Add to Wishlist]