800-368-7773

Successful Innovations for Agriculture Since 1979

5 Finger Quick Tine

Grain Platforms

Grain Platforms
- - SCH EasyCut Cutterbar System
  
  - SCH EasyCut Cutterbar System
  
  The SCH Easy Cut II cutterbar system (sickle bar system) eliminates the need for any adjustments, meaning more uptime and less maintenance. High quality spring steel guards, completely hardened sections and roller guides give this sickle bar system durability and low maintenance.
- SCH Pro-Drive Knife Drives
  
  SCH Pro-Drive Knife Drives
  
  Most knife drives lose stroke length and force.
  The SCH Pro-Drive’s planetary gear system is in rotation at all times. This produces a 100% linear knife movement, compared with wobble boxes or other oscillating and pendulum drives.
- Auger Trough Liners - Grain Heads
  
  Auger Trough Liners - Grain Heads
  
  When the grain head is covered with the 1/8" thick UHMW poly May Wes Auger Trough Liners, wet grain and moisture will not cause corrosion. May Wes Auger Trough Liners covers the full length of the floor under the auger - not just the feed opening.
- Bushel Plus SmartPan System
  
  Bushel Plus SmartPan System
  
  The Bushel Plus SmartPan System has revolutionized the checking- for-harvest-loss process. You can now quantify your grain loss and calibrate your loss monitor for immediate improvement! Savings from farmers have been reported anywhere from 2% to more than 10%. The Bushel Plus SmartPan System is PROVEN for corn, soybeans, and small grain such as wheat, oats, barley, canola and rice.
- Grain Head Cutting Components
  
  Grain Head Cutting Components
  
  Grain head cutting components available for AGCO, Case-IH, John Deere, MacDon and New Holland.
- Harvest Products, Miscellaneous
  
  Harvest Products, Miscellaneous
  
  CROP DIVIDERS: May Wes UHMW Poly Crop Dividers for grain heads are extremely durable and include fiberglass marker rods.
  
  PLASTIC WEAR BLOCK: Long-lasting self-lubricating Plastic Chain Tightner and/or Wear Block with 9/16” Hole
- HCC Flip Reel Kit
  
  HCC Flip Reel Kit
  
  The HCC Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in soybeans, canola and other tall, stringy crops for a more efficient harvest.. Improve your harvest with the Flip Combine Reel Kit from HCC, which features a tine flipping action that enhances reel performance and ensures continuous crop flow, especially for tough crops.
- HCC Orbit Trac II Reel Kits
  
  HCC Orbit Trac II Reel Kits
  
  Eliminating the Reel - Auger Gap The revolutionary, patent-pending design of the Orbit Reel, on the HCC Orbit Trac II reel kit, is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
- May Wes Poly Skid Shoes
  
  May Wes Poly Skid Shoes
  
  Run your head closer to the ground without pushing and piling soil and you will put more crop in the combine even in wet sticky conditions. May Wes Poly Skid Shoes are sold in complete kits to outfit an enitre grain head or as individual replacement parts.
- Replacement Reel Bundle
  
  Replacement Reel Bundle
  
  If, for any reason, you are in need a replacement reel, please consider HCC Replacement Reel Bundles. HCC Replacement Reel Bundles consist of the reel’s center tube and the six bat tubes with the tines already installed.
- Replacement Reel Finger Tines (Specialty and OEM)
  
  Replacement Reel Finger Tines (Specialty and OEM)
  
  Replacement reel tines - specialty and OEM - to match almost any reel on the market and deliver more grain to the combine! These include the Duck Foot paddle tine, The Paddle paddle tine; 5-Finger Quick Tines, Snap-On replacement reel tine, and Quick Finger replacement reel tine.
- Retractable Poly Augers Fingers
  
  Retractable Poly Augers Fingers
  
  Keep your auger feeding smoothly and efficiently - with NO harm to the combine. The May Wes Poly Retractable Fingers are an ideal alternative to metal fingers because they are far less damaging when a metal finger breaks and is fed through the combine. Unlike metal, broken poly will disintegrate before causing equipment damage.
- SCH Croplifters
  
  SCH Croplifters
  
  SCH crop lifters help lift and feed down crops and are essential in the harvest of different crops such as down wheat, oats, milo and other common cereal grains.
  SCH Croplifters for OEM guards, SCH EasyCut I and SCH EasyCut II guards.
- SCH Pro Flex Crop Lifter
  
  SCH Pro Flex Crop Lifter
  
  The SCH Pro Flex Lifter is specially designed, and often times essential, for the harvest of “downed” crops, whether it be because of snow, wind or heavy rains. Designed for edible beans, lentils, peas and downed soybeans.

5-FINGER QUICK TINE

The May Wes 5-Finger Quick Tine is an aftermarket replacement tine that is designed to turn your factory tine into a high performance tine that helps better gather short or sparse crops.

It easily slips over the existing finger, attaching directly to the bar. Its unique 5-finger design aids in feeding short or specialty crops more consistently and evenly.

Designed for use in soybeans, wheat, canola, chickpeas, lupins, and flax.

No tools are needed for installation.

Replacement 5-finger quick tine, designed to fit over:

#HRV983834 is designed to fit over: Case-IH 2162, 2152, 2142; MacDon FD70, FD75, FD1; New Holland 86C, 83C, 82C

#HRV983836 is designed to fit over:
John Deere 630FD, 635FD, 640FD, 645FD serial# 785,000 and above, 730FD, 735FD, 740FD, 745FD

#HRV983849 is designed to fit over:
Case-IH 3162, 3152; New Holland 840CD, 880CF

#HRV983838 is designed to fit over: AGCO 300-800, 8000, 8200, 9250; Case-IH 1010, 1020, 2010, 2020, 3020; John Deere 900, 600, 600FD (before serial number 785000); Massey Ferguson 8000, 8200, 9250, 9700, 9750, 9800, 9850; New Holland 971, 973, 71C, 72C, 73C, 74C, 92C, 94C, 740CF

5-FINGER QUICK TINE, CIH, MACDON, NH, SINGLE

5-FINGER QUICK TINE, CIH, MACDON, NH, SINGLE

Product ID: HRV983834

5 finger quick tine for Case-IH 2142, 2152, 2162; MacDon FD70, FD75, FD130, FD135, FD140, FD145; New Holland 82C, 83C, 86C.

Price: $7.64

[Read Reviews] [Write A Review]

[Add to Wishlist]

5-FINGER QUICK TINE, JD 600FD, 700FD, SINGLE

5-FINGER QUICK TINE, JD 600FD, 700FD, SINGLE

Product ID: HRV983836

5 finger quick tine for John Deere 630FD, 635FD, 640FD, 645FD, 730FD, 735FD, 740FD, 745FD and serial number 785000 & above. Designed to go over John Deere #HXE96538.

Price: $7.64

[Add to Wishlist]

5-FINGER QUICK TINE, ML, LEVEL II, SINGLE

5-FINGER QUICK TINE, ML, LEVEL II, SINGLE

Product ID: HRV983838

5 finger quick tine for AGCO, Case-IH, Gleaner, John Deere, Massey Ferguson and New Holland. Will only fit with ML reel wtih 4.5" spacing and Level II reel with 6" spacing.

Price: $6.42

[Add to Wishlist]