S.I. Distributing Inc....: One Wrench

Harvesting
Harvesting
- SCH EasyCut Cutting System
  SCH EasyCut Cutting System
  The Easy Cut II system eliminates the need for any adjustments, meaning more uptime and less maintenance.
- SCH Pro-Drive Knife Drives
  SCH Pro-Drive Knife Drives
  The problem most knife drives have, is the loss of stroke length and force. This is addressed with the SCH ProDrive. The Pro-Drive planetary gear system is in rotation at all times. Therefore, there are no dead spots as in wobble or crank drives where arms and levers have to come to a full stop twice per revolution to change direction.
- Auger Trough Liners
  Auger Trough Liners
  May Wes Auger Trough Liners covers the full length of the floor under the auger - not just the feed opening. Available for both grain heads and corn heads.
- Bushel Plus - Drop Pan System
  Bushel Plus - Drop Pan System
  More Grain in the Bin! Less in the Field! If you don't check accurately, you don't know what you are losing!
- Complete Orbit Trac II Reel
  Complete Orbit Trac II Reel
  Orbit Trac II Reel’s unique design and durable track system allows tines to swing directly past the auger, for continuous crop flow, while the flipping action resists wrapping.
- Corn Snout
  Corn Snout
  MAY WES POLY CORN SNOUTS ARE PROVEN TO OUTPERFORM AND OUTLAST. Replace your existing metal or worn out poly corn gatherers with May Wes Poly Corn Snouts and reap the benefits.
- Cornhead Auger
  Cornhead Auger
  Cornhead Augers available for Case-IH and John Deere cornheads
- Cornhead Stalk Stompers
  Cornhead Stalk Stompers
  Stalk Stompers available for John Deere, Case-IH, New Holland, Drago, Geringhoff Northstar, Geringhoff, Horizon, Lexion, AGCO, Harvestec, Fantini and Capello cornheads.
- Feederhouse Drum
  Feederhouse Drum
  Replacement Feederhouse Drums available for John Deere combines.
- Field Tracker
  Field Tracker
  Field Tracker allows headers to follow the ground contour, independent of the combine, by automatically tilting from side to side in response to terrain changes. This can greatly increase recovery of the low growing crops, like soybeans, when you're harvesting hillsides. Field Tracker kits are available for Case-IH combines.
- Gateway Sieves & Chaffers
  Gateway Sieves & Chaffers
  Tested and refined over several harvest seasons by high-hour combine users.
  The Gateway, HCC’s sieve and chaffer system, is significantly lighter than standard sieves and chaffers found on current combines. The patented design utilizes aluminum and plastic construction for lower frame weight.That reduces wear and tear on cleaning shoe bushings and bearings, extends their life, and reduces combine downtime.
- Grain Management
  Grain Management
- Grain Tank Auger Floor Liner
  Grain Tank Auger Floor Liner
  Protect the area in your grain tank that needs it the most and wears out the quickest.
- Grain Tank Bottom Unloading Auger
  Grain Tank Bottom Unloading Auger
  Grain Tank Bottom Unloading Auger for Case-IH and John Deere.
- Harvest Products, Miscellaneous
  Harvest Products, Miscellaneous
  Plastic Wear Blocks, ect.
- HCC Flip Reel Kit
  HCC Flip Reel Kit
  The Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in soybeans, canola and other tall, stringy crops.
  Installation is easy and can be done on equipment you already own.
  Designed as a retro-fit for all HCC tube-type reels built since 1990. ML 4-1/2" tine spacing or Level II 6" tine spacings are designed to work with the Flip Reel Kit.
  You can install it yourself in just a few hours using the Installation Instruction Manual.
- OEM Replacement Parts
  OEM Replacement Parts
  OEM replacement knife assemblies are sectional so they can be shipped by UPS. Same high quality parts as original equipment knife assemblies. Includes all hardware for assembly. We also have OEM replacement guards and sections available.
- Orbit Reel Kits
  Orbit Reel Kits
  Eliminating the Reel - Auger Gap
  The revolutionary, patent-pending design of the Orbit Reel is tailored to today’s high performance headers and brings the reel tines right up to the auger before exiting the crop.
- Poly Skid Shoes
  Poly Skid Shoes
  Run your head closer to the ground without pushing and piling soil and you will put more crop in the combine even in wet sticky conditions. Poly Skid Shoes are sold in complete kits to outfit an enitre grain head or as individual replacement parts.
- Radura Disc Mower Blades
  Radura Disc Mower Blades
  The Radura disc mower blade has been used throughout the world for over 50 years. Its exceptional quality and durability is the reason why so many professional users, OEMs, or hobby farmers trust radura disc mower blades for their machines.
- Reel Finger Tines (OEM and Specialty)
  Reel Finger Tines (OEM and Specialty)
  High performance tines for short or sparse crops. The Paddle is a proven tine replacement system that offers true high performance at harvest time. When crop conditions make harvesting difficult and inefficient, the Paddle is the cost-effective alternative to standard tines.
- Retractable Poly Augers Fingers
  Retractable Poly Augers Fingers
  Keep your auger feeding smoothly and efficiently. The May Wes Poly Retractable Fingers are an ideal alternative to metal fingers because they are far less damaging when a metal finger breaks and is fed through the combine. Unlike metal, broken poly will disintegrate before causing equipment damage.
- SCH Croplifters
  SCH Croplifters
  SCH Croplifters for OEM guards, SCH EasyCut I and SCH EasyCut II guards.
- SCH Hedge Trimmer
  SCH Hedge Trimmer
  SCH hedge trimmers offer straight, smooth and precision cuts which encourage a healthy re-growth.
- SCH Pro Flex Lifter
  SCH Pro Flex Lifter
  Schumacher pulse crop lifters combine simple design with durability for your easy pulse crop harvest. With the specifically designed slot, the PRO FLEX LIFTER can fit perfectly on most types of guards. That's why the SCH pulse lifter guarantees a tight fit.
- Tailboard Trash Blower
  Tailboard Trash Blower
  A metal tube that installs on end of fan exhaust above chopper or power tailboard. Blows off dust and trash that builds up on the tailboard. Fits John Deere S-Series combines; S550, S650, S660, S670, S680, S690, S760, S770, S780 and S790.
- Tractor Stalk Stompers
  Tractor Stalk Stompers
  Stalk stompers available for Case-IH, Challenger, John Deere and New Holland tractors.
- Unloading Auger Extensions
  Unloading Auger Extensions
  Unloading Auger Extensions for Case-IH, Gleaner and John Deere.
- Unloading Auger Tubes
  Unloading Auger Tubes
  Unloading Auger Tubes for Case-IH, Gleaner, John Deere and Massey-Ferguson
- Unloading Augers
  Unloading Augers
  Unloading augers for Case-IH, Gleaner, John Deere and Massey Ferguson.
- Vertical Unloading Auger
  Vertical Unloading Auger
  Vertical Unloading Auger for Case-IH, John Deere and Massey Ferguson
Planting
Planting
- Acra-Plant
  Acra-Plant
  Specializes in No-Till & Reduced-Tillage planting and drilling equipment, fertilizer application tools, and chisel plow tools.
- Bullseye Seed Tubes
  Bullseye Seed Tubes
  Bullseye Seed Tubes:
  • Reduce seed tube bounce
  • Reduce excessive wear
  • Feature a long life with the tungsten-carbide tip
  • Feature a smooth path to the trench
- CleanSweep
  CleanSweep
  Setting row cleaners is a pain. CleanSweep lets you do it from your cab.
- Closing Wheels
  Closing Wheels
  ?Closing wheels are the last part of the planter that can affect the crop at planting. The wrong setup can negate all the proper placement and depth you have achieved. Closing wheels securely close the furrow and eliminate air pockets.
  Closing wheels including cast closing wheel, Close-N-Till wheels, Finger-Till closing wheels and Rubber closing wheels.
- Disc Openers
  Disc Openers
  Wearparts seed disc openers, with Forges De Niaux blades and PEER bearings, for Case-IH, Great Plains, Kinze, John Deere and White
- Dust
  Dust
  Choose soy-protein DUST as a healthier, safer and cleaner seed and mechancial lubricant and as a replacement to graphite and talc.
- eFlow, 80/20 MIX, 8 LB
  eFlow, 80/20 MIX, 8 LB
  This special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow improves the flow of seed from the hopper to the meter.
- Finger-Till Cast Wheels
  Finger-Till Cast Wheels
  S.I. Distributing's Finger-Till Closing Wheel crumble sidewalls and close the furrow for optimum seed-to-soil contact. The side fins provide depth control and fine-tune the soil.
- Gauge Wheels
  Gauge Wheels
  Gauge wheel arms, assemblies and tires available for John Deere drills, Kinze planters, Great Plains planters, Monosem planters and White planters.
- John Deere Drill
  John Deere Drill
  NEEDHAM AG V8 FIRMING WHEELS fit John Deere 50, 60 and 90 Series drills and air seeders, plus Case-IH SDX air seeders.
  NINJA SEED BOUNCE FLAP for 50 & 90-series drill boots
  Replacement Seed Boots for John Deere 750,1560,1565 & 1860 drills
- Keeton Seed Firmers & Accessories
  Keeton Seed Firmers & Accessories
  Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence and test show a average increase of up to six bushels per acre.
- M3 Monitor System
  M3 Monitor System
  Population Monitor for Planters and Grain Drills. We can also supply you with a custom harness built specifically for your planter or drill.
- Martin Planting Attachments
  Martin Planting Attachments
  Martin Planting Attachments including, Floating Row Cleaners, Fixed Row Cleaners, Fertilizer Opener, Spading Closing Wheels & Drag Chains.
- Miscellaneous Planter Parts
  Miscellaneous Planter Parts
  Graphite, Kinze Brush Meter Adapter, etc.
- MudSmith Gauge Wheel Assemblies
  MudSmith Gauge Wheel Assemblies
  Greatly improves planting efficiency during wet soil conditions.
  Patented open rim design reduces mud and debris build-up. Improves planting efficiency during wet soil conditions. Modular construction allows every part to be field replaceable. Cast iron bearing hub eliminates wheel wobble and reduces time spent changing bearings. Widths of 4" for conventional planters, 3" for no-till and high speed planters, 2.5" for no-till and twin row planters.
- NH3 Disc Sealer
  NH3 Disc Sealer
  Start applying anhydrous and 28% fertilizer when crop is smaller.
- One Wrench
  One Wrench
  Adjust John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench
- Parallel Linkage
  Parallel Linkage
  Replace worn bushing in parrallel linkage for John Deere and Kinze Planters.
- Parallel Linkage Flange Bushing Rebuild Kit
  Parallel Linkage Flange Bushing Rebuild Kit
  PPS Parallel Linkage Flange Bushing Rebuild Kits for planters makes old and worn parallel linkage arms and bushings work better than new. All the wear takes place on replaceable parts instead of on your planter’s parallel linkage arms.
- Planter Parts
  Planter Parts
- Precision Meters
  Precision Meters
  Precision Meters & Parts.
  Because the components all mesh perfectly, Precision Meters hold one seed at a time, then release it. They’re engineered and built to do it again and again. You’ll see fewer skips and doubles – and higher yield.
- SI Belt Meter
  SI Belt Meter
  The SI Belt Meter will singulate the seed and maintain an accurate population control over a wide range of seed sizes. (2,000 to 4,000 actual seeds per pound). Now you can plant the seed population per acre you choose without guessing or adjusting your drill each time that you change seed sizes.
- Tractor Stalk Stompers
  Tractor Stalk Stompers
- Uniforce
  Uniforce
  Uniforce hydraulic down pressure for John Deere 50, 60, 90 and Pro series drills. Uniform pressure on all openers.
- Vacuum Meters
  Vacuum Meters
- Valion
  Valion
  Valion seed tube guards will eliminate seed tube wear and greatly reduce blade flex to create a properly shaped furrow and improved planting depth control.
  These guards are perfect for no-till or high-wear conditions, or anyone who is simply tired of replacing seed tube guards so often. While intended to limit blade flex, standard OEM seed tube guards can wear substantially in just a few hours of use.
- V-Closing Wheel Brackets
  V-Closing Wheel Brackets
  Closing Wheel Brackets for your John Deere, Kinze, Case-IH & White Planters.
- WaveVision
  WaveVision
  The Only Sensor That Can Tell Seeds From Dust. OPTICAL SENSORS ARE EASILY FOOLED. Revolutionary WaveVision doesn’t use optics. This sensor-seed tube combination uses high-frequency waves to look at falling objects from every angle.
Tillage
Tillage
- Smart - Till
  Smart - Till
- Vertical Tillage
  Vertical Tillage
  Vertical Tillage blades available for Case-IH, Great Plains, Krause and Landoll.
Weed Control
Weed Control
SUPER SPONGE WEED WIPER: Cost Effective Weed Control with NO Drift;
DAUBER - Home & Garden Weed Control - Apply drift free, even on a windy day
- Dauber
  Dauber
  Home & Garden Weed Control - Apply drift free, even on a windy day
- Weed Wipers
  Weed Wipers
  SUPER SPONGE WEED WIPERS - Cost Effective Weed Control with NO Drift
Other Products
Other Products
- The Sure Stop
  The Sure Stop
  Get it right the first time! Grain handling alignment sensor.
  The Sure Stop grain handling alignment sensor has a 90 Decibel Alarm and LED light signals for an exact stopping position.
  • Perfect Alignment Every Time.
- Air Filter Blaster
  Air Filter Blaster
  Extends the life of your filters
  • Reduces fuel consumption
  • Increases the life of your equipment
  • Increases engine performance
- Lockease Hitch Pins
  Lockease Hitch Pins
- Montezuma Tool Boxes
  Montezuma Tool Boxes
  Montezuma Portable Triangle Toolboxes were born on the farms and ranches of Kansas. The innovative lid design on the iconic triangle toolbox was designed to keep tools locked in position, even when driving in rough terrain.
  Tool storage so advanced you will feel as though you are working in the future.
- PRO Chute
  PRO Chute
  EMPTY YOUR SEED BOXES DIRECTLY INTO YOUR PLANTER. Quick attach for safe unloading.
- S.I. Distributing's Agricultural Equipment Camera Systems
  S.I. Distributing's Agricultural Equipment Camera Systems
  Our cameras are durable and are a perfect solution to help eliminate your blind spots.
- Schuck Cushion Hitches & Bumpers
  Schuck Cushion Hitches & Bumpers
- Swift Hitch
  Swift Hitch
- Swift Tail Lights
  Swift Tail Lights
- Test Stand Belt
  Test Stand Belt
  Test Stand belt for S.I. Distributing's meter test stand and Precision Planting's MeterMax test stand.
- Tractor Safety Light
  Tractor Safety Light
  Tractor Safety Light available to help comply with state laws

Adjust John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench.

The unique design of the One Wrench^TM allows you to adjust the depth of the John Deere 750 & 1850 Grain Drills with only one hand in one quick motion.

The design incorporates several pads that are used to depress the locking pin of the adjusting plate. Upon releasing the locking pin you can adjust the grain drill to the desired depth. Patent No. 7249391

This depth adjustment wrench is specific for John Deere drills and air seeders 750, 1850.

Pads are used to depress the locking pin of the adjusting plate.
Upon releasing the locking pin, the drill unit can be set to the desired depth position.

ONE WRENCH, JD 750, 1850 DRILL

Product ID: DRL010001

Adjust John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench.

More...

Price: $59.95

[Read Reviews] [Write A Review]

[Add to Wishlist]