The following is a list of all the Categories, Products and Feature Articles on our site. We hope it will assist you in finding what you're looking for.
Paddle Tines Paddle Tines and Five-Finger Quick Tines
High Performance Tines for Short or Sparse Crops
PADDLE TINE The Paddle's six-inch width lifts and feeds crop that standard tines miss. The Paddle is designed to provide a complete sweep of the header with each rotation.
5-FINGER QUICK TINE The unique 5-finger design "grabs" short, sparse or specialty crops more consistently and evenly. Designed for use in soybeans, wheat, canola, chickpeas, lupins and flax.
Parallel Arms Rebuild Kits - PPS Flange Bushing
PPS Premium Complete Flange Bushing Rebuild Kits, with Parallel Arms
PPS Rebuild-Your-Existing-Parallel-Arms (Hardware Only) Kits
PPS No-Ream Complete Flange Bushing Rebuild Kits, with Parallel Arms
Parallel Linkage
Replace worn parallel arms and bushings in parrallel linkage for John Deere and Kinze Planters.
Parallel Linkage including Parallel Linkage Rebuild Kits, Upper Parallel Arms and Lower Parallel Arms
Parts and Accessories
VisionWorks Wireless Camera Systems - Parts and Accessories
Parts and Accessories
VisionWorks Wired Camera Systems - Parts and Accessories
PheNom
PheNom™ is a nitrogen fixing biological bacteria blend of 2 endophytes bacteria. One lives in the plant above ground and supplies nitrogen from the air, the other increases efficiency of how the plant uses phosphorous. If you are wanting to increase the supply of nitrogen and increase phosphorus efficiency to your crop, try PheNom applied as a seed treatment, in furrow or foliar.
PheNom
PheNom™ is a nitrogen fixing biological bacteria blend of 2 endophytes bacteria. One lives in the plant above ground and supplies nitrogen from the air, the other increases efficiency of how the plant uses phosphorous. If you are wanting to increase the supply of nitrogen and increase phosphorus efficiency to your crop, try PheNom applied as a seed treatment, in furrow or foliar.
PheNom
PheNom™ is a nitrogen fixing biological bacteria blend of 2 endophytes bacteria. One lives in the plant above ground and supplies nitrogen from the air, the other increases efficiency of how the plant uses phosphorous. If you are wanting to increase the supply of nitrogen and increase phosphorus efficiency to your crop, try PheNom applied as a seed treatment, in furrow or foliar.
Planter Parts
Products include: Acres Plus Seed Box Toppers, Air Design Scrapers, Depth-A-Matic, Down Pressure Spring Package, Seed Tube Guard, Trail Jet and the Trash Guard
Planters
Planters
Rebounder seed deflectors, for planters, funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Planters
Rebounder seed deflectors, for planters, funnel all seeds to the center of the seed trench. The Rebounder is a simple-yet-effective planting attachment that improves the accuracy and uniformity of in-furrow seed placement by funneling all seeds to the center of the seed V. This eliminates seed bounce.
Plastic Wear Blocks
Plug
Mur-lok Plug
Poly Box
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 2; Poly Box
Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge2; Poly Box Planter
Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge Plus; Poly Box Planter
Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge XP; Poly Box Planter
Poly Box Planter
PPS Premium Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge 5; Poly Box Planter
Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
Poly Box Planter
Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
John Deere; MaxEmerge XP; Poly Box Planter
Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
Poly Box Planter
Poly Box Planter
PPS No-Ream Complete Flange Bushing Parallel Arms Kits
Poly Box Planter
Poly Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge Plus; Poly Box Planter
Poly Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge XP/Poly Box Planter
Poly Box Planter
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits
MaxEmerge 5; Poly Box Planter
Poly Capped Bolts
UHMW-PE poly capped bolts are an excellent solution for applications where there is excessive friction and wear or high velocity. They excel at protecting steel, aluminum and wood surfaces. The entire bolt head is covered with compression molded Ultra High Molecular Weight Polyethylene (UHMW-PE).
Poly Cutting Edge
Poly Cutting Edges (also known as Poly Blades) protect smooth, hard surfaces such as cobblestone and pavements that can be damaged by equipment while plowing. May Wes cutting edges are custom made from UHMW poly.
Poly Finger Kit
Includes poly finger and guide
Poly Fingers Only
Includes poly finger only
Poly Grain Tank Auger Floor Liner
May Wes Poly Auger Trough Liners for Grain Tanks
• Guards against corrosion
• Provides a smooth, slick surface for the grain to flow out of the grain tank.
• Full coverage of the trough underneath the auger keeps grain in the tank for maximum harvest potential.
Poly Heads
May Wes UHMW Poly Snout Savers for Poly Heads
Poly Pickup Bands
Don't Settle for Metal! Replace your baler’s metal bands with May Wes poly pickup bands. These bands are manufactured from impact resistant plastic and will not bend or break when you hit rocks or other objects in the field.
Polytine Reel Tines
Polytine Reels Replacement Reels
Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” ( 114 mm) apart. The tines fit into the notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989.
PPS Accessories
Additional accessories for Precision Planter Solutions parallel arm kits, including Delta Force brackets, Kinze set back brackets, and more.
PPS Complete Parallel Arm Kits - Premium
• Eliminates ALL Areas of Unwanted Movement in the Parallel Arms
• Best option for optimal planter repair
• PPS arms are laser cut, robotically welded, and are purposely built heavy to withstand high speeds and hydraulic down pressure.
PPS Parallel Arm Flange Bushing Kits
The PPS Premium Complete Flange Bushing Rebuild Kits with Parallel Arms and the PPS Rebuild-Your-Existing-Parallel-Arms (Hardware Only) Kits will eliminate ALL areas of unwanted movement in the parallel linkage arms. There is also the option of the PPS No-Ream Complete Flange Bushing Kit with Parallel Arms.
Precision Brushes
Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles.
Precision Finger Pickup Meters
Precision Meters & Parts. Because the components all mesh perfectly, Precision Meters hold one seed at a time, then release it. They’re engineered and built to do it again and again. You’ll see fewer skips and doubles – and higher yield.
Precision Finger Set
The shape and design of the finger determines how well it can singulate and hold a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
Precision Meter & Bullseye Seed Tube
Consists of the Precision Meter & Universal Bullseye Seed Tube.
Precision Meter Parts
If you don’t need a whole new meter, you can still improve your spacing with Precision Meter finger sets, backing plates or belts.
Precision Meters - Great Plains
Precision Meters available for Great Plains planters.
Precision Meters - John Deere
Precision Meters available for John Deere 7000, 7100, 7200 and 1700 series. Also available for Kinze 2000 series.
Precision Meters - Kinze
Precision Meters available for Kinze 3000 series.
Precision Planting
Rebounder Seed Deflectors for Precision Planting Planters
Precision Planting
Rebounder Seed Deflectors - Precision Planting Planters
Precision Planting
PPS Flange Bushing Rebuild-Your-Existing-Parallel-Arms Kits for Precision Planting Ready row units
Precision Planting
PPS PREMIUM COMPLETE KITS WITH PARALLEL ARMS - PRECISION PLANTING
Eliminate ALL Areas of Unwanted Movement in the Parallel Arms
Precision Planting-ready row units
Precision Planting
PPS No-Ream Complete Flange Bushing Parallel Arms Kits for Precision Planting-Ready row units
Precision Planting CleanSweep
Precision Planting's CleanSweep Row-Cleaner Control System is a dual air cylinder that lets you set and adjust your row cleaners’ down pressure from the cab, on the go.
The CleanSweep system includes air cylinders, lines, air tank, compressor and controller.
Precision Planting SeedRight Seed Plates
Simple Retrofit for Precision Planting Meters
Large Cell Disc: For use with Precision Planting vSet meters. Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. Seed mixes containing primarily large sized seeds (wheat & cereal rye) can also be used.
Precision Planting SeedRight Seed Plates
Simple Retrofit for Precision Planting Meters --- Large Cell Disc: For use with Precision Planting vSet meters. Larger sized seeds, commonly less than 35,000 seeds per pound; wheat, oats, cereal rye, triticale. BundleDrop Seed Plate: Plant soybeans in bundles! This “team” approach can help to improve emergence and overall plant stand.
Precision PopMax Backing Plate
The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes.
Precision SkipStop Cover
With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion.
Precision SureFire Seed Belt
The new SureFire™ cupped seed belt releases seed down the center every time for sure spacing and more ears.
Prior to serial number HAJ300001
PRO 1200
PRO 700
Pro Baler
PRO Chute
With the Pro Chute, empty your seed boxes directly, smoothly and quickly into your planter. In as little as two to four minutes you can empty your seed box. Use for loading and unloading your planter.
Pro Chute
With the Pro Chute, empty your seed boxes directly, smoothly and quickly into your planter. In as little as two to four minutes you can empty your seed box. Use for loading and unloading your planter.
PRO Chute
With the Pro Chute, empty your seed boxes directly, smoothly and quickly into your planter. In as little as two to four minutes you can empty your seed box. Use for loading and unloading your planter.
PRO-Drive Replacement Parts
Python Wrap
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
Python Wrap
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
Python Wrap
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
Python Wrap
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
Python Wrap
Will fit hoses up to 13/16" in diameter.
Python Wrap
The Python Wrap, of the OutBack Wrap "The Snake Collection" bulk wrap, will fit hoses up to 13/16" in diameter.
PZ Zweegers
Radura Rotary Disc Mower Blades for PZ Zeegers
top
P/D KIT, CIH 1020, GREASE WB, CIH SCH Pro-Drive Kit available for Case-IH 1020 Flex with a greaseable wobble box. This kit requires a serial number JJC0215000 and lower. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, CIH 1020, GREASE WB, SCH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a greaseable wobble box. This kit requires a serial number JJC0215000 and lower. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, JD 200,900 FLEX, W/230 1/2", JD
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 1/2" clevis. Also available for JD Flex 9000 series with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/230 1/2", SCH
SCH Pro-Drive Kit available for JD Flex 4420, 6620 & 7720 through 1985 with 1/2" clevis. Also available for John Deere 9000 series with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, JD 600F, 600R, PKG OF 100
John Deere 600F/600R poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, MACDON, SINGLE
MacDon FM100 Float Module poly finger only. Guide kit and hardware NOT included.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 1/4", (2012)
30' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 1/4", (2015)
30' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 1/4",(2013/2014)
30' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID, 25', PREDRILLED, 1/4"
25 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, MACDON 974 (2005 & before), 21', PRE-DRILLED 3/8"
21 Ft. MacDon 974 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 13', PRE-DRILLED 1/4"
13 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200-900, 13', PRE-DRILLED 1/4"
13 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, JD 600FD (2012-2015), CENTER SKID SHOE, 5.5 X 9.75 X 1/4
John Deere 600F, 600FD (2013-2014) Center Skid Shoe - 5.5" x 9.75" - Yellow - 1/4"- Predrilled.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, CORN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 12F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series. Recommended for 30" or greater row spacing.
P/D KIT, CIH 1020, EARLY OIL WB, CIH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number between JJC0215001 and JJC0323604. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, CIH 1020, EARLY OIL WB, SCH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number between JJC0215001 and JJC0323604. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, JD 200,900 FLEX, W/240 1/2", JD
SCH Pro-Drive Kit available for JD Flex 6620 and 7720 after 1985 with 1/2" clevis. Also available for JD Flex 8820 with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/240 1/2", SCH
SCH Pro-Drive Kit available for JD Flex 6620 and 7720 after 1985 with 1/2" clevis. Also available for JD Flex 8820 with 1/2" clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, 1010, 1020, 2142, 2152, 2162; MACDON CA20, CA25; NH 82C, 83C, 86C, PKG OF 100
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH 3020, 3162, NH 740CF, PKG OF 100
Case-IH 3020, 3162 and New Holland 740CF poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, PKG OF 100
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH2020, NH 74C, PKG OF 100
Case-IH 2020 and NH 74C poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 200, 900, PKG OF 100
John Deere 200/900 poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600FD, 600D, 700FD, 700D, RDF, PKG OF 100
John Deere 600FD, 600D, 700FD, 700D, RDF series single poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, MACDON, PKG OF 24
MacDon FM100 Float Module poly finger only, package of 24. Guide kit and hardware NOT included.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 3/8", (2012)
30' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 3/8", (2013/2014)
30' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 30', JD 630FD, PRE-DRILLED, 3/8", (2015)
30' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 30', PREDRILLED, 1/4"
30 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, MACDON 974 (2005 & before), 25', PRE-DRILLED 3/8"
25 Ft. MacDon 974 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 15', PRE-DRILLED 1/4"
15 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 15', PRE-DRILLED, 3/8"
15 Ft. Case-IH 1020 Skid Shoe Set - 3/8 Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 13', PRE-DRILLED, 3/8"
13 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F; JD 600FD (2012-2015), CENTER SKID SHOE, 5.5 X 9.75 X 3/8
John Deere 600F, 600FD (2013-2014) Center Skid Shoe - 5.5" x 9.75" - Yellow - 3/8"- Predrilled.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 6F, CORN
For 15-20" narrow row corn. The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 6F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series. Recommended for 15-20" row spacing.
P/D KIT, CIH 1020, LATE OIL WB, CIH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number JJC0323605 and up. Also serial number CBJ023001 and up. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, CIH 1020, LATE OIL WB, SCH
SCH Pro-Drive Kit available for Case-IH 1020 Flex with a oil bath wobble box. This kit requires a serial number JJC0323605 and up. Also serial number CBJ023001 and up. NOTE: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will added to the kit price and credited back if a runner is returned in useable condition.
P/D KIT, JD 200,900 FLEX, W/230 M12, JD
CH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 12mm clevis. Also available for JD Flex 9000 series with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/230 M12, SCH
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 12mm clevis. Also available for JD Flex 9000 series with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, CIH 2020, NH 74C, PKG OF 24
Case-IH 2020 and NH 74C poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH 3020, 3162, NH 740CF, PKG OF 24
Case-IH 3020, 3162 and New Holland 740CF poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, PKG OF 24
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, PKG OF 24
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 200, 900, PKG OF 24
John Deere 200/900 poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600F, 600R, PKG OF 24
John Deere 600F/600R poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600FD, 600D, 700FD, 700D, RDF, PKG OF 24
John Deere 600FD, 600D, 700FD, 700D, RDF series single poly finger only, package of 24. Guide kit and hardware NOT included.
POLY FINGER ONLY, MACDON, PKG OF 100
MacDon FM100 Float Module poly finger only, package of 100. Guide kit and hardware NOT included.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 1/4", (2012)
35' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 1/4", (2015)
35' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 1/4",(2013/2014)
35' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 35', PREDRILLED, 1/4"
35 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2062 (before serial #CCC0015328); MACDON 974 (2005 & before); NH 84C (before serial #PPP001119); 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 2062 (before serial #CCC0015328); MacDon 974 (2005 & before); New Holland 84C (before serial #PPP001119) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 16', PRE-DRILLED 1/4"
16 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, PRE-DRILLED, 15' X 1/4"
15 Ft. JD 200F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, 15', PRE-DRILLED, 3/8"
15 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE, 5.9 X 9.75 X 1/4
John Deere 600FD Center Skid Shoe - 5.9" x 9.75" - Yellow - 1/4" - Predrilled.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, SWEET CORN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 12F, SWEET CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series.
P/D KIT, CIH 1010, RIGID, CIH
SCH Pro-Drive Kit available for Case-IH Rigid 1010.
P/D KIT, CIH 1010, RIGID, SCH
SCH Pro-Drive Kit available for Case-IH Rigid 1010.
P/D KIT, JD 200,900 FLEX, W/240 M12, JD
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 12mm clevis. Also available for JD Flex 8820 with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife horizontal drive.
P/D KIT, JD 200,900 FLEX, W/240 M12, SCH
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 12mm clevis. Also available for JD Flex 8820 with 12mm clevis. The clevis size refers to the size of the bolt used on the flex knife horizontal drive.
POLY FINGER KIT, JD 600F, 600R, SINGLE
John Deere 600F/600R poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, JD 600FD, 600D, 700FD, 700D, RDF, PKG OF 12
John Deere 600FD, 600D, 700FD, 700D, RDF series poly finger kit. Guide kit and hardware included.
POLY FINGER ONLY, CIH 2020, NH 74C, SINGLE
Case-IH 2020 and NH 74C poly finger only. Guide kit and hardware NOT included.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 3/8", (2012)
35' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 3/8", (2013/2014)
35' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 35', JD 635FD, PRE-DRILLED, 3/8", (2015)
35' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 40', PREDRILLED, 1/4"
40 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2062 (before serial #CCC0015328); MACDON 974 (2005 & before); NH 84C (before serial #PPP001119); 36', PRE-DRILLED 3/8"
36 Ft. Case-IH 2062 (before serial #CCC0015328); MacDon 974 (2005 & before); New Holland 84C (before serial #PPP001119) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, NH 973/73C, 18', PRE-DRILLED 1/4"
Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 16.5', PRE-DRILLED, 3/8"
16.5 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 15', PRE-DRILLED, 3/8"
15 Ft. JD 200F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, PRE-DRILLED, 15' X 1/4"
15 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, END SKID SHOE, LH, 12 X 33 X 3/8
John Deere 600F Left End Skid Shoe - 12" x 33" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE, 5.9 X 9.75 X 3/8
John Deere 600FD Center Skid Shoe - 5.9" x 9.75" - Yellow - 3/8"- Predrilled.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 6F, PUMPKIN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. The pumpkin finger set has 6 fingers and the flags are modified into the shape of a pendant.
PRECISION METER, JD 7000, KZ 2000, 6F, PUMPKIN
Precision Finger Pick-Up Meter for pumpkins, fits John Deere 7000, 7100; Kinzel 2000 series. Pumpkin meters have 6 fingers and the flags are modified into the shape of a pendant. The pumpkin meter has a "C" insert installed which has a unique agitation profile that improves singulation. The pumpkin meter comes with an adjustable brush. For optimum performance, run the pumpkin meter on a Test Stand with the seed you are planting for the proper brush setting. It is recommended that the hole in the "C" insert is modified by enlarging it so there is a larger opening for the seed to exit. Generally, the 6-finger pumpkin meter will plant around 5,000 seeds per acre, which is typical for smaller canning pumpkins. For larger Jack-O-Lantern pumpkins you will need to modify the finger set so it only has 2 fingers. This will reduce the population by one-third.
PRECISION METER, KZ 3000, 12F, CORN
Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series. Recommended for 30" or greater row spacing.
P/D KIT, JD 200,900 FLEX, W/230 M16, JD
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 16mm clevis. Also available for JD Flex 9000 series with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/230 M16, SCH
SCH Pro-Drive Kit available for JD Flex 4420, 6620 and 7720 through 1985 with 16mm clevis. Also available for JD Flex 9000 series with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER KIT, CIH 3020, 3162, NH 740CF, SINGLE
Case-IH 3020, 3162 and New Holland 740CF poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, CIH, MACDON, NH, SINGLE
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, CIH, MACDON, NH, SINGLE
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, JD 200, 900, SINGLE
John Deere 200/900 poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, JD 600D, 600FD, 700FD, SINGLE
John Deere 600D, 600FD, 700FD poly finger kit. Guide kit and hardware included.
POLY FINGER ONLY, JD 600F, 600R, SINGLE
John Deere 600F/600R poly finger only. Guide kit and hardware NOT included.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 1/4", (2012)
40' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 1/4", (2015)
40' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 1/4",(2013/2014)
40' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, AGCO 9255 (after serial #HHD011 STD SKID) 45', PREDRILLED, 1/4"
45 Ft. AGCO 9255 (after serial #HHD011) standard skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (before serial #CBJ020001 & all HAJ), NH 74C (before serial #PNL017183, all HAJ), NH 973/73C, 20', PRE-DRILLED 1/4"
20 Ft. Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, PRE-DRILLED, 16' X 1/4"
16 Ft. JD 200F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, END SKID SHOE, RH, 3 X 14.5 X 1/4
John Deere 600F Right End Skid Shoe - 3" x 14.5" - Yellow - 1/4"- Predrilled.
POLY, YELLOW, JD 600FD (2012-2015), END SKID SHOE, LH, 11.625 X 34.75 X 3/8
John Deere 600FD (2012-2015) Left End Skid Shoe - 11.625" x 34.75" - Yellow - 3/8" - Predrilled.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, SUNFLOWER
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.
PRECISION METER, JD 7000, KZ 2000, 12F, SUNFLOWER
Precision Finger Pick-Up Meter for sunflowers, fits John Deere planter models 7000 & 7100. Kinze planter model 2000 series. This special meter is used for #3 and #4 size sunflowers.
P/D KIT, JD 200,900 FLEX, W/240 M16, JD
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 16mm clevis. Also available for JD Flex 8820 with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
P/D KIT, JD 200,900 FLEX, W/240 M16, SCH
SCH Pro-Drive Kit available for JD Flex 6620 & 7720 after 1985 with 16mm clevis. Also available for JD Flex 8820 with 16mm clevis. The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring.
POLY FINGER ONLY, CIH 2062; MACDON 872, 873 W/ 11" AUGER DRUM, SINGLE
Case-IH 2042, 2052 and 2062; MacDon 872, 873 with 11" auger drum; New Holland 84C poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH 3020, 3162, NH 740CF
Case-IH 3020, 3162 and New Holland 740CF poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, CIH, MACDON, NH, SINGLE
Case-IH 1010, 1020, 2142, 2152 and 2162 series; MacDon CA20/CA25; New Holland 82C, 83C and 86C poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 200, 900, SINGLE
John Deere 200/900 poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, JD 600FD, 600D, 700FD, 700D, RDF, SINGLE
John Deere 600FD, 600D, 700FD, 700D, RDF series single poly finger only. Guide kit and hardware NOT included.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 3/8", (2012)
40' Poly Skid Shoe Set for 2012 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 3/8", (2013/2014)
40' Poly Skid Shoe Set for 2013 and 2014 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, 40', JD 640FD, PRE-DRILLED, 3/8", (2015)
40' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, NH 973/73C, 22', PRE-DRILLED 1/4"
22 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 17.5', PRE-DRILLED, 3/8"
17.5 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 16', PRE-DRILLED, 3/8"
16 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, END SKID SHOE, RH, 3 X 14.5 X 3/8
John Deere 600F Right End Skid Shoe - 3" x 14.5" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, END SKID SHOE, RH, 11.375 X 34.75 X 3/8
John Deere 600FD Right End Skid Shoe - 11.625" x 34.75" - Yellow - 3/8" - Predrilled.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. Requires reamer package PPS688011.
PRECISION FINGER SET, 12F, POPCORN
The shape and design of the finger determines how well it can singulate and hold a single seed - round or flat. The Precision Finger Set's unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. This finger set is designed for popcorn; the fingers are one-half the width of a standard corn finger.
PRECISION METER, JD 7200, 1700, 12F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series. Recommended for 30" or greater row spacing.
P/D KIT, JD 200,900 RIGID, W/230, JD
SCH Pro-Drive Kit available for JD Rigid 4420, 6620 and 7720 through 1985. Also available for JD Rigid 9000 series.
P/D KIT, JD 200,900 RIGID, W/230, SCH
SCH Pro-Drive Kit available for JD Rigid 4420, 6620 and 7720 through 1985. Also available for JD Rigid 9000 series.
POLY FINGER KIT, CIH 2020 (before serial #CBJ020701), NH 73C, 74C (before serial #PNL01781), SINGLE
Case-IH 2020 (before serail #CBJ020701) and New Holland 73C, 74C (before serial #PNL01781) poly finger kit. Guide kit and hardware included.
POLY KIT, 45', JD 645FD, PRE-DRILLED, 1/4", (2015)
45' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, NH 973/73C, 24', PRE-DRILLED 1/4"
24 Ft. New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit
POLY KIT, YELLOW, JD 200, 900, PRE-DRILLED, 18' X 1/4"
18 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, LH, 11.5 X 8 X 1/4
John Deere 600F Left Inside Skid Shoe - 11.5" x 8" - Yellow - 1/4"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015), 5.5 X 4.3 X 1/4
John Deere 600FD (2015) Center Skid Shoe - 5.5" x 4.3" - Yellow - 1/4"- Predrilled.
PRECISION METER, JD 7200, 1700, 6F, CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series. Recommended for 15-20" row spacing.
P/D KIT, JD 200,900 RIGID, W/240, JD
SCH Pro-Drive Kit available for JD Rigid 6620 & 7720 after 1985. Also available for JD Rigid 8820.
P/D KIT, JD 200,900 RIGID, W/240, SCH
SCH Pro-Drive Kit available for JD Rigid 6620 & 7720 after 1985. Also available for JD Rigid 8820.
POLY FINGER KIT, CIH 2020 (serial #CBJ020701 & later), NH 74C (serial #PNL01781 & later), SINGLE
Case-IH 2020 (serial #CBJ020701 & later) and NH 74C (serial #PNL01781 & later) poly finger kit. Guide kit and hardware included.
POLY KIT, 45', JD 645FD, PRE-DRILLED, 3/8", (2015)
45' Poly Skid Shoe Set for 2015 John Deere 600FD. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042196, sold separately.
POLY KIT, CIH 2020 (before serial #CBJ020001 & all HAJ), NH 74C (before serial #PNL017183, all HAJ), NH 973/73C, 25', PRE-DRILLED 1/4"
25 Ft. Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 20', PRE-DRILLED 3/8"
20 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 18', PRE-DRILLED, 3/8"
18 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, LH, 11.5 X 8 X 3/8
John Deere 600F Left Inside Skid Shoe - 11.5" x 8" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015), 5.5 X 4.3 X 3/8
John Deere 600FD (2015) Center Skid Shoe - 5.5" x 4.3" - Yellow - 3/8"- Predrilled.
PRECISION METER, JD 7200, 1700, 12F, SWEET CORN
Precision Finger Pick-Up Meter, fits John Deere planter models 7200, 7300 & 1700 series.
POLY KIT, CIH 2020 (before serial #CBJ020001 & all HAJ), NH 74C (before serial #PNL017183, all HAJ), NH 973/73C, 30', PRE-DRILLED 1/4"
30 Ft. Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C - Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, 900, PRE-DRILLED, 20' X 1/4"
20 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, RH, 9.5 X 14.5 X 1/4
John Deere 600F Right Inside Skid Shoe - 9.5" x 14.5" - Yellow - 1/4"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015), 5.7 X 10 X 1/4
John Deere 600FD (2015) Center Skid Shoe - 5.7" x 10" - Yellow - 1/4"- Predrilled.
POLY KIT, SILVER, CIH 1020, 22.5', PRE-DRILLED 3/8"
22.5 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 20', PRE-DRILLED, 3/8"
20 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, PRE-DRILLED, 22' X 1/4"
22 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY, YELLOW, JD 600F, INSIDE SKID SHOE, RH, 9.5 X 14.5 X 3/8
John Deere 600F Right Inside Skid Shoe - 9.5" x 14.5" - Yellow - 3/8"- Predrilled.
POLY, YELLOW, JD 600FD, CENTER SKID SHOE (2015, 5.7 X 10 X 3/8)
John Deere 600FD (2015) Center Skid Shoe - 5.7" x10" - Yellow - 3/8"- Predrilled.
POLY KIT, YELLOW JD 900, 22', PRE-DRILLED, 3/8"
22 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, PRE-DRILLED, 22' X 1/4"
22 Ft. JD 200F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 22', PRE-DRILLED, 3/8"
22 Ft. JD 200F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200-900, PRE-DRILLED, 24' X 1/4"
24 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, SILVER, CIH 1020, 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 1020 Skid Shoe Set - 3/8" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, YELLOW, JD 200, 900, 24', PRE-DRILLED, 3/8"
24 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, 900, PRE-DRILLED, 25' X 1/4"
25 Ft. JD 200/900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 200, 900, 25', PRE-DRILLED, 3/8"
25 Ft. JD 200/900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, PRE-DRILLED, 30' X 1/4"
30 Ft. JD 900F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POP MAX PLATE, WITH "A" INSERT, CORN
The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeble inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush.
P/D KIT, AGCO 300,500,800,8000, AGCO
SCH Pro-Drive Kit available for AGCO Flex 300 - 8000 Series. Please specify tie rod bolt size (3/4" or 7/8") with AGCO Cutter Bar.
P/D KIT, AGCO 300,500,800,8000, SCH
SCH Pro-Drive Kit available for AGCO Flex 300 - 8000 Series.
P/D KIT, MASSEY-WHITE 9750, OEM CUTTERBAR
SCH Pro-Drive Kit available for Massey-White Flex 9750 Series. Knifehead for Massey-White cutting system is not available. A knifehead clamp is provided that must be welded to original knifehead strap.
P/D KIT, MASSEY-WHITE 9750, SCH
SCH Pro-Drive Kit available for Massey-White Flex 9750 Series.
PARALLEL ARM, LOWER, 16"
Lower parallel linkage arm, 16" standard length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
PARALLEL ARM, LOWER, 23"
Lower parallel linkage arm, 23" extended length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
PARALLEL ARM, LOWER, HEAVY DUTY, CIH 1200, 1300
Required when installing Martin UMO fertilizer openers on a CIH 1200 and 1300 series planter for no-till situations.
PARALLEL ARM, UPPER, 16"
Upper parallel linkage arm, 16" standard length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
PARALLEL ARM, UPPER, 23"
Upper parallel linkage arm, 23" extended length. Will fit John Deere MaxEmerge2, MaxEmerge Plus, MaxEmerge Pro, Maxemerge XP, MaxEmerge XP Pro, MaxEmerge 5 and ExactEmerge planters and John Deere drills 1530, 1535 with MaxEmerge row units.
PARALLEL LINKAGE REBUILD KIT, JD 7000, 7100; KINZE
Parallel Linkage Rebuild Kit, Row. For John Deere 7000, 7100 & Kinze Planters, (Must drill out parallel linkage to 1 3/32"). Will not work with parallel linkage MOUNTED no-till coulter. Kit Includes, 8 oversized bushings, 8 special shouldered bolts & 8 locknuts.
PARALLEL LINKAGE REBUILD KIT, JD 7200, 7300, 1700
Parallel Linkage Rebuild Kit, Row. For John Deere 7200, 7300 & 1700 series planters, (No drilling required). Kit Includes, 8 bushings, 8 special shouldered bolts & 8 locknuts.
PATCH BOLT, 5/8" X 1-3/4" FLANGE BOLT
5/8" x 1 3/4" flange patch bolt used for attaching the hub assembly to the WA1360 row cleaner frame.
PHENOM LIF/F, CASE OF 2
PheNom can be applied liquid in furrow (16oz/acre) or Foliar (16oz/acre). Contains 2 x 2.5 gallon jugs. This product is a biological. Any returns require pre-approval due to shelf life.
PHENOM ST
PheNom, seed treatment, is applied at 2oz/cwt. This product is a biological. Any returns require pre-approval due to shelf life.
PILLOW BLOCK BEARING, SMART-TILL
PILLOW BLOCK HOUSING, SMART-TILL
PIN, CYLINDER, BOTTOM
PIN, CYLINDER, TOP
PLANTING DEPTH ADAPTER, 1/2"
This adapter raises the center stainless steel impact plate by 1/2" from the original 1" depth set by the Set-N-Seed. So your minimum starting depth with this adapter can be 1/2".
PLASTIC WEAR BLOCK
Long lasting self-lubricating plastic chain tightner and/or Wear Block with 9/16" hole.
PLUG, CIH, MACDON
Plug for Case-IH 2162 and MacDon FD75.
PLUG, KNFHD, CIH
PLUG, STEEL, CIH, MACDON
Steel plug for Case-IH 2162 and MacDon FD75.
POLY CAP BOLT, 1/4" X 1", BLACK, PKG OF 12
1/4" x 1" package of 12 poly cap bolt. Black in color.
POLY CAP BOLT, 1/4" X 1", WHITE, PKG OF 12
1/4" x 1" package of 12 poly cap bolt. White in color.
POLY CAP BOLT, 3/8" X 1", BLACK, PKG OF 12
3/8" x 1" package of 12 poly cap bolt. Black in color.
POLY CAP BOLT, 3/8" X 1", WHITE, PKG OF 12
3/8" x 1" package of 12 poly cap bolt. White in color.
POLY CAP BOLT, 5/16" X 1", BLACK, PKG OF 12
5/16" x 1" package of 12 poly cap bolt. Black in color.
POLY CAP BOLT, 5/16" X 1", WHITE, PKG OF 12
5/16" x 1" package of 12 poly cap bolt. White in color.
POLY CUTTING EDGE, HORIZONTAL, 4" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 4" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 4" X 3/4"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 6" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 6" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 6" X 3/4"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 8" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 8" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, HORIZONTAL, 8" X 3/4"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 6" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 6" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 8" X 1"
The custom Poly Cutting Edge is sold by the inch.
POLY CUTTING EDGE, VERTICAL, 8" X 1.5"
The custom Poly Cutting Edge is sold by the inch.
POLY FINGER KIT, AGCO, CHALLENGER
AGCO 7000, 7200, 8000, 8200 and Challenger FH, FHB poly finger kit. Guide and hardware included.
POLY FINGER KIT, AGCO, CHALLENGER, SINGLE
AGCO 700, 800, 7000, 7200, 8000, 8200 and AGCO 700, 800, 7000, 7200, 8000, 8200 and Challenger FH, FHB poly finger kit. Guide and hardware included.
POLY FINGER KIT, LEXION
Lexion V525, V535, V540, V750, V900, F25, F30, F525, F750, F900, G30 and G525 poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, LEXION, SINGLE
Lexion V1050, V1200, F535, F540, G535 and G540 poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, MACDON, PKG OF 12
MacDon 872, 873 with 12" Auger Drum poly finger kit, package of 12. Guide kit and hardware included.
POLY FINGER KIT, MACDON, PKG OF 12
MacDon FM100 float module poly finger kit - package of 12. Guide kit and hardware included.
POLY FINGER KIT, MACDON, SINGLE
MacDon 872, 873 with 12" Auger Drum poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, MACDON, SINGLE
MacDon FM100 float module poly finger kit. Guide kit and hardware included.
POLY FINGER KIT, NH 971, 972, 973, SINGLE
New Holland 971, 972, 973 poly finger kit. Guide kit and hardware included.
POLY FINGER ONLY, NH 971, 972, 973
New Holland 971, 972, 973 poly finger only. Guide kit and hardware NOT included.
POLY FINGER ONLY, NH 971, 972, 973, PKG OF 100
New Holland 971, 972, 973 poly finger only, package of 100. Guide kit and hardware NOT included.
POLY FINGER ONLY, NH 971, 972, 973, PKG OF 24
New Holland 971, 972, 973 poly finger only, package of 24. Guide kit and hardware NOT included.
POLY KIT, 30', JD 630FD, 730FD, RD30F, PRE-DRILLED, 1/4", (2016 & NEWER)
30' Poly Skid Shoe Set for John Deere 630FD, 730FD, RD30F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 30', JD 630FD, 730FD, RD30F, PRE-DRILLED, 3/8", (2016 & NEWER)
30' Poly Skid Shoe Set for John Deere 630FD, 730FD, RD30F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 35', JD 635FD, 735FD, RD35F, PRE-DRILLED, 1/4", (2016 & NEWER)
35' Poly Skid Shoe Set for John Deere ohn Deere 635FD, 735FD, RD35F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 35', JD 635FD, 735FD, RD35F, PRE-DRILLED, 3/8", (2016 & NEWER)
35' Poly Skid Shoe Set for John Deere 635FD, 735FD, RD35F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 40', JD 640FD, 740FD, RD40F, PRE-DRILLED, 1/4", (2016 & NEWER)
40' Poly Skid Shoe Set for John Deere 640FD, 740FD, RD40F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 40', JD 640FD, 740FD, RD40F, PRE-DRILLED, 3/8", (2016 & NEWER)
40' Poly Skid Shoe Set for John Deere 640FD, 740FD, R40F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 45', JD 645FD, 745FD, RD45F, PRE-DRILLED, 1/4", (2016 & NEWER)
45' Poly Skid Shoe Set for John Deere 640FD, 740FD, RD40F 2016 & newer. Includes 1/4" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, 45', JD 645FD, 745FD, RD45F, PRE-DRILLED, 3/8", (2016 & NEWER)
45' Poly Skid Shoe Set for John Deere 645FD, 745FD, RD45F 2016 & newer. Includes 3/8" thick poly, 9/32" drill bit and size 88 small head pop rivets. NOTE: Draper Skid Plate, MYW042289, sold separately.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 HIGH PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (after serial #FHD01101 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (after serial #FHD01101 LOW PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (after serial #FHD01101 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE, AHD01101 - FHD01100 LOW PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE, AHD01101 - FHD01100 LOW PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE, AHD01101 - FHD01100 LOW PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (serial #AHD01101 - CHD01100 HIGH PROFILE; AHD01101 - FHD01100 LOW PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly. Low Profile is determined by having 1" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 25', PREDRILLED 1/4"
25 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 30', PREDRILLED 1/4"
30 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 35', PREDRILLED 1/4"
35 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE), 40', PREDRILLED 1/4"
40 Ft. AGCO 9250 (serial #CHD01101 - FHD01100 HIGH PROFILE) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: High Profile is determined by having 2-3/8" rise on the poly.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 25', PREDRILLED, 1/4"
25 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 30', PREDRILLED, 1/4"
30 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 35', PREDRILLED, 1/4"
35 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 40', PREDRILLED, 1/4"
40 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (after serial #HHD011 LOW SKID, 45', PREDRILLED, 1/4"
45 Ft. AGCO 9255 (after serial #HHD011) low skid - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 25', PREDRILLED 1/4"
25 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 30', PREDRILLED 1/4"
30 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 35', PREDRILLED 1/4"
35 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO 9255 (prior to serial #HHD011), 40', PREDRILLED 1/4"
40 Ft. AGCO 9255 (prior to serial #HHD011) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 13' X 1/4"
13 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 15' X 1/4"
15 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 16' X 1/4"
16 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 18' X 1/4"
18 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 20' X 1/4"
20 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 22' X 1/4"
22 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III (PRE-1987), PREDRILLED, 24' X 1/4"
24 Ft. AGCO Series III, (PRE-1987) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 13', PREDRILLED 1/4" (1987 & Newer)
13 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 15', PREDRILLED 1/4" (1987 & Newer)
15 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 16', PREDRILLED 1/4" (1987 & Newer)
16 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 18', PREDRILLED 1/4" (1987 & Newer)
18 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 20', PREDRILLED 1/4" (1987 & Newer)
20 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 22', PREDRILLED 1/4" (1987 & Newer)
22 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 24', PREDRILLED 1/4" (1987 & Newer)
24 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 25', PREDRILLED 1/4" (1987 & Newer)
25 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, AGCO SERIES III, 400, 500, 700, 800, 7000, 8000, 30', PREDRILLED 1/4" (1987 & Newer)
30 Ft. AGCO Series III, 400, 500, 700/700C, 800/800C, 7000, 8000, (1987 & Newer) - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ020001 - CBJ020700), NH 74C (serial #PNL017183 - PNL017800), 20', PRE-DRILLED 1/4"
20 Ft. Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ020001 - CBJ020700), NH 74C (serial #PNL017183 - PNL017800), 25', PRE-DRILLED 1/4"
25 Ft. Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ020001 - CBJ020700), NH 74C (serial #PNL017183 - PNL017800), 30', PRE-DRILLED 1/4"
30 Ft. Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ020701 - CBJ021300), NH 74C (serial #PNL017800 - PNL018300), 20', PRE-DRILLED 1/4"
20 Ft. Case-IH 2020 (serial #CBJ020701 - CBJ021300); New Holland 74C (serial #PNL017800 - PNL018300) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ020701 - CBJ021300), NH 74C (serial #PNL017800 - PNL018300), 25', PRE-DRILLED 1/4"
25 Ft. Case-IH 2020 (serial #CBJ020701 - CBJ021300); New Holland 74C (serial #PNL017800 - PNL018300) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ020701 - CBJ021300), NH 74C (serial #PNL017800 - PNL018300), 30', PRE-DRILLED 1/4"
30 Ft. Case-IH 2020 (serial #CBJ020701 - CBJ021300); New Holland 74C (serial #PNL017800 - PNL018300) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL), NH 74C (serial #PNL018301 & later, Y9ZL & YAZL), 20' DD, PRE-DRILLED 1/4"
20 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 20' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL), NH 74C (serial #PNL018301 & later, Y9ZL & YAZL), 20', PRE-DRILLED 1/4"
20 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL), NH 74C (serial #PNL018301 & later, Y9ZL & YAZL), 25' DD, PRE-DRILLED 1/4"
25 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 25' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL), NH 74C (serial #PNL018301 & later, Y9ZL & YAZL), 25', PRE-DRILLED 1/4"
25 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL), NH 74C (serial #PNL018301 & later, Y9ZL & YAZL), 30' DD, PRE-DRILLED 1/4"
30 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 30' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL), NH 74C (serial #PNL018301 & later, Y9ZL & YAZL), 35' DD, PRE-DRILLED 1/4"
35 Ft. Case-IH 2020 (serial #CBJ021301 & later, Y9ZL & YAZL); New Holland 74C (serial #PNL018301 & later, Y9ZL & YAZL) Skid Shoe Set - Black - 1/4" - Predrilled. NOTE: Will only fit a 35' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (after serial #CCC0014710), MACDON 973, 974 (2006 & newer), 21' & 25', PRE-DRILLED 3/8"
Case-IH 2052 (after serial #CCC0014710); MacDon 973, 974 (2006 & newer) Draper Skid Shoe Set - White - 3/8" - Predrilled. Will fit 21' and 25'. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CIH 2052 (after serial #CCC0014710); MACDON 973 (2006 & newer); 30', 36', 39', PRE-DRILLED 3/8"
Case-IH 2052 (after serial #CCC0014710) and MacDon 973 (2006 & newer) - Draper Skid Shoe Set - White - 3/8" - Predrilled. Will fit 30', 36', and 39'. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 21', PRE-DRILLED 3/8"
21 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 36', PRE-DRILLED 3/8"
36 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2052 (before serial #CCC0014710), MACDON 973 (2005 & before), 39', PRE-DRILLED 3/8"
39 Ft. Case-IH 2052 (before serial #CCC0014710); MacDon 973 (2005 & before) Draper Skid Shoe Set - White - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, CIH 2062 (after serial #CCC0015328), MACDON 974 (2006 & newer), NH 84C (after serial #PPP001119); 30', 36'
Case-IH 2062 (after serial #CCC0015328); MacDon (2006 & Newer); New Holland 84C (after serial #PPP001119) Skid Shoe Set - White - 3/8" - Predrilled. Will fit 30' and 36'. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CIH 3020, NH 740CF, 20' DD, PRE-DRILLED 3/8"
20 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 20' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 20', PRE-DRILLED 3/8"
20 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 25' DD, PRE-DRILLED 3/8"
25 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 25' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 30' DD, PRE-DRILLED 3/8"
30 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 30' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 35' DD, PRE-DRILLED 3/8"
35 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Will only fit Case-IH 3020 and New Holland 740CF, 35' double drive. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3020, NH 740CF, 35', PRE-DRILLED 3/8"
35 Ft. Case-IH 3020; New Holland 740CF Skid Shoe Set - Black - 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Center Shoes are 3/8" thick molded. All End Shoes are 1/4" and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 25', PRE-DRILLED 3/8"
25 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 30', PRE-DRILLED 3/8"
30 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 35', PRE-DRILLED 3/8"
35 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 40', PRE-DRILLED 3/8"
40 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH 3162/3152, NH 880CF/840CD, 45', PRE-DRILLED 3/8"
45 Ft. Case-IH 3162/3152; New Holland 880CF/840CD Draper Skid Shoe Set - Black- 3/8" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit. NOTE: Cutterbar Skid Shoes are 3/8" thick molded. Both Center and End Skid Shoes are 1/4" thick and are not molded.
POLY KIT, CIH, MACDON, NH; 30',35',40', 45', PRE-DRILLED 3/8"
Case-IH 2162/2152/2142; MacDon FD70/D60/D50; New Holland 86C/83C/82C Draper Skid Shoe Set - White - 3/8" - Predrilled. Will fit 30', 35', 40' and 45'. Mounting hardware included. Center skid shoe, MYW042061, not included in kit. NOTE: Molded Cutterbar Skid Shoes, MYW983840, sold separately.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 15', PRE-DRILLED, 1/4"
15 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 17', PRE-DRILLED, 1/4"
17 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 20', PRE-DRILLED, 1/4"
20 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 25', PRE-DRILLED, 1/4"
25 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, CLAAS, LEXION, CATERPILLAR, 30', PRE-DRILLED, 1/4"
30 Ft. Claas, Lexion and Caterpillar F900, F750, F530, F525, F30, F20 Skid Shoe Set - Black - 1/4" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 20', PRE-DRILLED 1/4"
20 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 25', PRE-DRILLED 1/4"
25 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 30', PRE-DRILLED 1/4"
30 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, GLEANER/MASSEY 7200/8200, 35', PRE-DRILLED 1/4"
35 Ft. Gleaner/Massey 7200/8200 - Skid Shoe Set - Silver - 1/4" - Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 618F, 18', PRE-DRILLED 1/4"
18 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 618F, 18', PRE-DRILLED 3/8"
18 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 620F, 20', PRE-DRILLED 1/4"
20 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 620F, 20', PRE-DRILLED 3/8"
20 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 622F, 22', PRE-DRILLED 1/4"
22 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 622F, 22', PRE-DRILLED 3/8"
22 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 625F, 25', PRE-DRILLED 1/4"
25 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 625F, 25', PRE-DRILLED 3/8"
25 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 630F, 30', PRE-DRILLED 1/4"
30 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 630F, 30', PRE-DRILLED 3/8"
30 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 635F, 35', PRE-DRILLED 1/4"
35 Ft. JD 600F Skid Shoe Set - Yellow - 1/4" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, JD 635F, 35', PRE-DRILLED 3/8"
35 Ft. JD 600F Skid Shoe Set - Yellow - 3/8" Predrilled. Mounting hardware includes: pop rivets and 9/32" drill bit.
POLY KIT, MACDON 960, 962, 25', UNDRILLED 1/4"
25 Ft. MacDon 960, 962 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 960, 962, 30', UNDRILLED 1/4"
30 Ft. MacDon 960, 962 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 960, 962, 36', UNDRILLED 1/4"
36 Ft. MacDon 960, 962 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 21', UNDRILLED 1/4"
21 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 25', UNDRILLED 1/4"
25 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 30', UNDRILLED 1/4"
30 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, MACDON 972, 36', UNDRILLED 1/4"
36 Ft. MacDon 972 - Skid Shoe Set - White - 1/4" - Undrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY KIT, YELLOW, JD 900, 30', PRE-DRILLED, 3/8"
30 Ft. JD 900F Skid Shoe Set - Yellow- 3/8" Predrilled. Mounting hardware includes: pound rivets and 9/32" drill bit.
POLY PICKUP BAND, AGCO, CIH, CHALLENGER, HESSTON, M/F, ROUND BALER
Poly Pickup Band for AGCO 5446A, 5456A, 5546, 5556A; Case-IH 8435, RS451, RS551, RS561, RS561A; Challenger RB46, RB46B, RB463A, RB56B, RB563A; Hesston 845, 846A, 855, 856, 856A, 945, 946A, 955, 956; Massey Ferguson 2646A, 2656A, 2746A, 2756A.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit standard size head RBX441, RBX442 , RBX443 (after serial number Y7N030707) and RB444.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit standard size head model RBX443 prior to serial number Y7N030706.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit standard size head RBX552, RBX553, RBX554, RBX562, RB563 and RB564.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 1.5M size head BX451, RBX452, RBX453, RBX461, RBX462, RBX463, RBX454 and RBX464. Will also fit 1.8M head size RBX453.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 1.8M size head RBX452, RBX462, RBX463, RBX464; 2.0m head size RBX452, RBX453, RBX462, RBX463, RBX464 ; outer 10 on RBX552, RBX562, RBX563 with 2.0m head size.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 2.0M size head RBX552, RBX562, RBX563 and RB564. Required on the middle 21 bands.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 1.5M head size RB565; requires 23.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit 2.0M head size RB565; requires 31.
POLY PICKUP BAND, CIH ROUND BALER
Poly Pickup Band for Case-IH round baler. Will fit RB455, RB465 1.5M and 2.0M head size. Will require 27 poly bands on 1.8M and 31 on 2.0M.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH 8550, 8570, 8575 and 8585.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH LB324, LB333, LB334, LB424, LB433, LB434, LBX322, LBX331, LBX332, LBX421, LBX422 with standard and packer cutter head.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH LB324, LB333, LB334, LB424, LB433, LB434, LBX322, LBX331, LBX332, LBX421, LBX422 with roto cutter head.
POLY PICKUP BAND, CIH SQUARE BALER
Poly Pickup Band for Case-IH square baler. Will fit Case-IH SB521, SB531, SB541, SB551, SBX520, SBX530, SBX540 and SBX550.
POLY PICKUP BAND, CLAAS
Poly Pickup Band for Claas balers and self-propelled forage Harvesters. Will fit Jaguar 820, 840, 860, 880; Quadrant 2100, 2200, 3200, 3300, 3400, 3500, 3800, 4500, 5500, 6800; Rollant 240, 250, 254, 255, 340, 350, 355, 454, 455; Variant 180, 260, 280.
POLY PICKUP BAND, JD HARVESTER
Poly Pickup Band for John Deere self propelled harvestor. Will fit 630A, 640A, 645A, 630B, 640B, 645B, 630C, 640C and 645C.
POLY PICKUP BAND, JD ROUND BALER
Poly Pickup Band for John Deere round baler. Will fit 330, 335, 375, 385, 430, 435, 447, 448, 449, 456, 458, 459, 466, 467, 468, 469, 535, 545, 546, 547, 550, 556, 558, 559, 566, 567, 568, 569, 570, 572, 580, 582, 590, 592.
POLY PICKUP BAND, JD ROUND BALER
Poly Pickup Band for John Deere med wide head round baler, outer three bands.
POLY PICKUP BAND, JD ROUND BALER
Poly Pickup Band for John Deere round baler. Will fit 447, 448, 449, 456, 458, 459, 466, 467, 468, 469, 535, 545, 546, 547, 550, 556, 558, 559, 566, 567, 568, 569.
POLY PICKUP BAND, NH CHOPPER
Poly Pickup Band for New Holland Self-Propelled Chopper. Will fit 280FP, 290FP, 380FPA, 380FPE, 346W, 356W, 366W.
POLY PICKUP BAND, NH RB450, RB460, 1.8M & 2.0M
Poly Pickup Band for New Holland round baler. Will fit RB450, RB460, 1.5M and 2.0M head size. Will require 27 poly bands on 1.8M and 31 on 2.0M. Includes hardware.
POLY PICKUP BAND, NH RB550, RB560, 1.5M
Poly Pickup Band for New Holland Round Baler. Will fit RB550, RB560, 1.5M head size. Will require 23 poly bands for 1.5M. Includes hardware.
POLY PICKUP BAND, NH RB550, RB560, 2.0M
Poly Pickup Band for New Holland Round Baler. Will fit RB550, RB560, 2.0m head size. Will require 31 poly bands for 2.0M. Includes hardware.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland round baler. Will fit standard size head BR770, BR770A, BR780, BR780A, BR7080, BR7090.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit 630, 634, 638, 640, 650, 660, BR730, BR730A (s/n Y7N030707 & after), BR7050, BR7060.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit 644, 648, 654, 658, 664, 678, 688, BR730A (prior to s/n Y7N030706), BR740, BR740A.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit outer 10 on 1.8M head BR7060, BR7070; outer 10 on 1.8M x.s. head BR740, BR740A, BR750, BR750A; requires 31 on 2.0M head BR7060, BR7070, BR740, BR740A, BR750, BR750A, BR780; outer 10 on 2.0M x.s. head BR7090, BR780A.
POLY PICKUP BAND, NH ROUND BALER
Poly Pickup Band for New Holland Round Baler. Will fit middle 21on 1.8M head BR7060, BR7070; middle 17 on 1.8M x.s. head BR740, BR740A, BR750, BR750A; middle 21 on 2.0M x.s. head BR7090, BR780A.
POLY PICKUP BAND, NH ROUND BALER, 1.5M
Poly Pickup Band for New Holland Round Baler. Will fit 640, 644, 648, 650, 654, 658, BR7060, BR7070, BR740, BR740A, BR750, BR750A, RB450, RB460. Requires 23 on 1.5M head size. Includes hardware.
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland Square Baler. Will fit 27P, 29P, 707W, 717W, 770W, 790W, 880W, 890W, 900W, 919W3, 919W4 and 990W; 585 with roto cutter head
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland square baler. Will fit New Holland 590, 595, BB940, BB960, BB9050, BB9060, BB9070, BB9080, 230, 330, 340 with roto cutter head.
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland Square Baler. Will fit 276, 311, 315, 316, 320, 326, 565, 568, 570, 575, 580, BC5050, BC5060, BC5070, BC5080 with roto cutter head.
POLY PICKUP BAND, NH SQUARE BALER
Poly Pickup Band for New Holland square baler. Will fit New Holland 590, 595, BB940, BB960, BB9050, BB9060, BB9070, BB9080, 230, 330, 340 with standard and packer cutter head.
POLY PICKUP BAND, VERMEER
Poly Pickup Band for Vermeer round baler. Will fit Vermeer I, Super I, J, Super J, K, L, XL, Super M, N, Rancher, Rebel.
POLY PICKUP BAND, VERMEER
Poly Pickup Band for Vermeer round baler. Will fit Vermeer Pro Baler.
POLY SHOES, NH 489, 499, 1495, 1496, PAIR
New Holland 489, 499, 1495, 1496 Haybine - 13" x 13.5". All Hardware is included. All Skid Shoes are Undrilled unless otherwise specified.
POLY STRAP, UMO
Furrow control strap.
POLY, BLACK, CIH 2020 (CIH 2020 (serial #CBJ020001 - CBJ020700), NH 74C (serial #PNL017183 - PNL017800), CENTER SKID SHOE, 29 X 21 X 1/4
Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) Center Skid Shoe - 29" x 21" - Black- 1/4"- Predrilled.
POLY, BLACK, CIH 2020 (CIH 2020 (serial #CBJ020001 - CBJ020700), NH 74C (serial #PNL017183 - PNL017800), END SKID SHOE, 23 X 21 X 1/4
Case-IH 2020 (serial #CBJ020001 - CBJ020700); New Holland 74C (serial #PNL017183 - PNL017800) End Skid Shoe - 23" x 21" - Black- 1/4"- Predrilled.
POLY, BLACK, CIH 2020 (before serial #CBJ020001 & all HAJ), NH 74C (before serial #PNL017183, all HAJ), NH 973/73C, CENTER SKID SHOE, 29 X 24 X 1/4
Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C Center Skid Shoe - 29" x 24" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 2020 (before serial #CBJ020001 & all HAJ), NH 74C (before serial #PNL017183, all HAJ), NH 973/73C, END SKID SHOE, RH, 23 X 24 X 1/4
Case-IH 2020 (before serial #CBJ020001 & all HAJ); New Holland 74C (before serial #PNL017183, all HAJ), New Holland 973/73C Right End Skid Shoe - 23" x 24" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 2020 (before serial #CBJ020001 - CBJ020700 & all HAJ), NH 74C (before serial #PNL017183 - PNL017800 & all HAJ), NH 973/73C, END SKID SHOE, 7 X 30 X 1/4, DD
Case-IH 2020 (before serial #CBJ020001 - CBJ020700 & all HAJ), New Holland 74C (before serial #PNL017183 - PNL017800 & all HAJ), New Holland 973/73C End Skid Shoe - 7" x 30" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a double drive platform.
POLY, BLACK, CIH 2020 (before serial #CBJ020001 - CBJ020700 & all HAJ), NH 74C (before serial #PNL017183 - PNL017800 & all HAJ), NH 973/73C, END SKID SHOE, RH, 4.5 X 30 X 1/4
Case-IH 2020 (before serial #CBJ020001 - CBJ020700 & all HAJ), New Holland 74C (before serial #PNL017183 - PNL017800 & all HAJ), New Holland 973/73C Right End Skid Shoe - 4.5" x 30" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a single drive platform.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - & later, Y9ZL & YAZL), NH 74C (serial # PNL017801 - & LATER, Y9ZL & YAZL), CENTER SKID SHOE, 29 X 18 X 1/4
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Center Skid Shoe - 29" x 18" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - & later, Y9ZL & YAZL), NH 74C (serial # PNL017801 - & LATER, Y9ZL & YAZL), END SKID SHOE, 17 X 18 X 1/4
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), End Skid Shoe - 17" x 18" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - & later, Y9ZL & YAZL), NH 74C (serial # PNL017801 - & LATER, Y9ZL & YAZL), END SKID SHOE, DD, LH, 7 X 25.5 X 1/4
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Left End Skid Shoe - 7" x 25.5" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a double drive platform.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - & later, Y9ZL & YAZL), NH 74C (serial # PNL017801 - & LATER, Y9ZL & YAZL), END SKID SHOE, DD, RH, 7 X 25.5 X 1/4
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Right End Skid Shoe - 7" x 25.5" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a double drive platform.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - & later, Y9ZL & YAZL), NH 74C (serial # PNL017801 - & LATER, Y9ZL & YAZL), END SKID SHOE, RH, 29 X 18 X 1/4
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Right End Skid Shoe - 14.5" x 18" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - & later, Y9ZL & YAZL), NH 74C (serial # PNL017801 - & LATER, Y9ZL & YAZL), END SKID SHOE, RH, 4.5 X 25 X 1/4
Case-IH 2020 serial # CBJ020701 & later, Y9ZL & YAZL), New Holland 74C (serial # PNL017801 & later, Y9ZL & YAZL), Right End Skid Shoe - 4.5" x 25" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 2020 (serial # CBJ020701 - CBJ021300), NH 74C (serial # PNL017801 - PNL018300), END SHOE, 6.5 X 24 X 1/4
Case-IH 2020 (serial # CBJ020701 - CBJ021300), New Holland 74C (serial # PNL017801 - PNL018300), End Shoe - 6.5" x 24" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3020, 3152, 3162, NH 740CF, 880CF, 840CD, CUTTERBAR SKID SHOE, 5.75 X 8 X 3/8
Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF, 840CD Cutterbar Skid Shoe - 5.75" x 8" - Black - 3/8" - Predrilled.
POLY, BLACK, CIH 3020, 3152, 3162, NH 740CF, 880CF, 840CD, END SKID SHOE, LH, 8.5 X 22.5 X 1/4
Case-IH 3020, 3152, 3162; New Holland 740CF, 840CD Left End Skid Shoe - 8.5" x 22.5" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3020, 3152, 3162, NH 740CF, 880CF, 840CD, END SKID SHOE, RH, 5 X 15.25 X 1/4
Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF, 840CD Right End Skid Shoe - 5" x 15.25" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3020, NH 740CF, END SKID SHOE, DD, RH, 8.5 X 22.5 X 1/4
Case-IH 3020, New Holland 740CF, Right End Skid Shoe - 8.5" x 22.5" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a Case-IH 3020 and New Holland 740CF double drive.
POLY, BLACK, CIH 3020, NH 740CF, SKID SHOE, DD, RH, 8.75 X 8 X 1/4
Case-IH 3020, New Holland 740CF, Right End Skid Shoe - 8.75" x 8" - Black - 1/4" - Predrilled. NOTE: This skid shoe is only for a Case-IH 3020 and New Holland 740CF double drive.
POLY, BLACK, CIH 3152, 3162, NH 880CF, 840CD, CENTER SKID SHOE, 14.75 X 33 X 1/4
Case-IH 3152, 3162; New Holland 880CF, 840CD Center Skid Shoe - 5" x 15.25" - Black - 1/4" - Predrilled.
POLY, BLACK, CIH 3152, 3162, NH 880CF, 840CD, END SKID SHOE, LH, 5 X 15.25 X 1/4
Case-IH 3152, 3162; New Holland 880CF, 840CD Left End Skid Shoe - 5" x 15.25" - Black - 1/4" - Predrilled.
POLY, BLACK, MACDON, DRAPER SKID PLATE, 35-7/16 X 79 X 1/4
MacDon FD75/D65 Replacement Draper Skid Plate- 35-7/16""x79" - 1/4" Thick - Predrilled. Not included in kits. Please order separately.
POLY, BLACK, NH 973/73C, CENTER SKID SHOE, 35 X 24 X 1/4
New Holland 973/73C Center Skid Shoe - 35" x 24" - Black - 1/4" - Predrilled.
POLY, SILVER, END SHOE, 5.5 X 23.625 X 3/4
AGCO 9255, LH and RH end shoe (A) - 5.5 X 23.625 - Silver - 3/4" - Predrilled. Note: Will only fit Serial Numbers prior to HHD01101.
POLY, SILVER, SHOE, 10.375 X 35.625 X 1/4
AGCO 9255 skid shoe (F) - 10.375 X 35.625 - Silver - 1/4" - Predrilled. Note: Will only fit Serial Numbers prior to HHD01101.
POLY, SILVER, SHOE, 10.375 X 35.625 X 1/4
AGCO 9255 skid shoe (B) - 10.375 X 35.625 - Silver - 1/4" - Predrilled. Note: Will only fit Serial Numbers prior to HHD01101.
POLY, SILVER, SHOE, 10.5 X 11.625 X 1/4
AGCO 9255 standard skid shoe - 10.5 X 11.625 - Silver - 1/4" - Predrilled.
POLY, SILVER, SHOE, 10.5 X 17.5 X 1/4
AGCO 9255 standard skid shoe - 10.5 X 17.5 - Silver - 1/4" - Predrilled.
POLY, SILVER, SHOE, 11.75 X 29 X 1/4
AGCO 9255 standard skid shoe - 11.75 X 29 x 1/4" - Pre-Drilled.
POLY, WHITE, CIH, MACDON, NH, LEFT END SHOE, 11 X 15 X 3/8
Case-IH 2162/2152/2142; MacDon FD75/D70/D60/D50; New Holland 86C/83C/82C- Left End Skid Shoe - 11"x15" - 3/8" Thick - Predrilled.
POLY, WHITE, CIH, MACDON, NH, CENTER SHOE, 14 X 16 X 3/8
Case-IH 2162/2152/2142; MacDon FD70/D60/D50; New Holland 86C/83C/82C- Center Skid Shoe - 14"x16" - 3/8" Thick - Predrilled.
POLY, WHITE, CIH, MACDON, NH, CENTER SHOE, 7 X 19 X 1/4
Case-IH 2162/2152/2142; MacDon FD75/FD70/D60/D50; New Holland 86C/83C/82C- Center Skid Shoe - 7"x19" - 1/4" Thick - Predrilled.
POLY, WHITE, CIH, MACDON, NH, DRAPER SKID PLATE, 35-3/16 X 76-5/8 X 1/4
Case-IH 2162/2152/2142; MacDon FD70/D60/D50; New Holland 86C/83C/82C Replacement Draper Skid Plate- 35-3/16""x76-5/8" - 1/4" Thick - Predrilled. Not included in kits. Please order separately.
POLY, WHITE, CIH, MACDON, NH, RIGHT END SHOE, 11 X 15 X 3/8
Case-IH 2162/2152/2142; MacDon FD75/FD70/D60/D50; New Holland 86C/83C/82C- Right End Skid Shoe - 11"x15" - 3/8" Thick - Predrilled.
POLY, YELLOW, DRAPER SKID PLATE, 31 X 63.5 X 1/4
John Deere 600FD Replacement Draper Skid Plate - 31" x 63.5" - Yellow - 1/4" - Predrilled. Will fit 2015 and prior platforms. Not included in kits. Please order separately.
POLY, YELLOW, DRAPER SKID PLATE, 31 X 72.75 X 1/4
John Deere 600FD Replacement Draper Skid Plate - 31" x 72.75" - Yellow - 1/4" - Predrilled. Will fit 2016 and newer platforms after serial number 785000. Not included in kits. Please order separately.
POP MAX PLATE, WITH "C" INSERT, SUNFLOWER
The special Kevlar impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeble inserts let you make adjustments for varying seed sizes and shapes.
POUND RIVET TOOL
Available for easy installation of the Poly Skid Shoes.
POWER CABLE, M3, 18'
PPS BUSHING, JD CWB SPRING HOLE
Hardened steel bushing to repair the hole where the spring hooks to the cast closing wheel arm stop/support. It can be welded in or installed with Loctite 638. Will fit John Deere MaxEmerge Plus, MaxEmerge XP, Pro-Series XP, MaxEmerge 5, ExactEmerge planters; 1530, 1535 drills. Requires reamer package PPS688178.
PPS CYLINDER BRACKET, CIH 1200 W/ SUREFORCE
Upper cylinder bracket for Ag Leader SureForce. It is required is they are adding Ag Leader SureForce and buying Case-IH arms at the same time.
PPS HARDWARE, CIH 1200 W/ SUREFORCE
Hardware to install cylinder bracket and hydraulic valve mount on Ag Leader SureForce
PPS HYDRAULIC VALVE MOUNT, CIH 1200 W/ SUREFORCE
Hydraulic valve mount for Ag Leader SureForce
PPS KIT, 14" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16
14" premium flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16", PBO
14" no ream flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 14" PARALLEL ARM, CIH 1200, DELTA FORCE, 1-1/16", PBO
14" premium flange bushing rebuild kit for Case-IH 1200 series with DeltaForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 1200, W/ SUREFORCE, 1-1/16, PBO
14" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO
14" premium flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 14" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO, CB
14" no ream flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBI
16" no ream flange bushing rebuild kit for John Deere 17X5 or DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBO
16" no ream flange bushing rebuild kit for John Deere 17X5 or DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBI
16" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBO
16" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBI
16" no ream flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBO
16" no ream flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBI
16" premium flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBO
16" premium flange bushing rebuild kit forJohn Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7000, 1-1/16
16" premium flange bushing rebuild kit for John Deere 7000, 7100 (MaxEmerge). Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB
Parallel Linkage Flange Bushing 16" Standard Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBI
16" no ream flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB Series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBO
16" no ream flange bushing rebuild kit for John Deere poly box 1700, DB series; MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5. Includes parallel arms with flange bushings installed. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBI
16" premium flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB Series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBO
16" premium flange bushing rebuild kit for John Deere 1700 or DB series with MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, JD 7200, POLY BOX PLANTER, 1/4" SUPPORT PLATE, 1-1/8, PBI, NSB
16" no ream flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB Series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, PUSH ROWS, 1-1/16"
16" premium flange bushing rebuild kit for Kinze 200 series split row "push unit". Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, PUSH ROWS, 1-1/16", NSB
16" no ream flange bushing rebuild kit for Kinze 2000 series split row "push unit". Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, REAR ROWS, 1-1/16", PBO
16" premium flange bushing rebuild kit for Kinze 2000 series standard row "pull unit", 1989 & newer. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, REAR ROWS, 1-1/16, NSB
16" no ream flange bushing rebuild kit for Kinze 2000 series standard row "pull unit", 1989 & newer. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 2000, REAR ROWS, WITH DELTA FORCE, 1-1/16, PBO
16" premium flange bushing rebuild kit for Kinze 2000 series standard row "pull unit", 1989 & newer with DeltaForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, 1-1/16", PBO
16" premium flange bushing rebuild kit for Kinze 3000 series split row "push unit". Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series split row "push unit". Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, WITH DELTA FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series split row "push unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, PUSH ROWS, WITH DELTA FORCE, 1-1/16, PBO
16" premium flange bushing rebuild kit for Kinze 3000 series split row "push unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, 1-1/16"
16" premium flange bushing rebuild kit for Kinze 3000 series standard row "pull unit". Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series standard row "pull unit". Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, WITH DELTA FORCE, 1-1/16
16" premium flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, WITH SURE FORCE
16" premium flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, REAR ROWS, WITH SURE FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, WITH SURE FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series split row "push unit" with SureForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, KINZE 3000, WITH SURE FORCE, 1-1/16, PBO
16" premium flange bushing rebuild kit for Kinze 3000 series split row "push unit" with SureForce. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, PP, 1-1/16, NSB
16" no ream flange bushing rebuild kit for Precision Planting ready row units; box & mini hopper. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, PP, 1-1/16, PBO
16" premium flange bushing rebuild kit for Precision Planting ready row units; box & mini hopper. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, WHITE 6000, 8000, 1-1/16"
16" premium flange bushing rebuild kit for White 6000 and 8000 series. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, WHITE 8000, 1-1/16", NSB
16" no ream flange bushing rebuild kit for White 6000 and 8000 series. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 BOX PLANTER, WHITE 9000 VE, 1-1/16
16" premium flange bushing rebuild kit for White 9000 series Vacuum Electric (VE/VER); White 9000 box planters. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 BOX PLANTER, WHITE 9000 VE; 1-1/16", NSB
16" no ream flange bushing rebuild kit for White 9000 series Vacuum Electric (VE/VER); White 9000 box planters. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 MINI HOPPER, 1-1/16", NSB, PBO
16" no ream flange bushing rebuild kit for White 9000 series mini hopper. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 16" PARALLEL ARM, WHITE 9000 MINI HOPPER, 1-1/16", PBO
16" premium flange bushing rebuild kit for White 9000 series mini hopper. Includes parallel arms with flange bushings installed. Requires reamer package PPS688011.
PPS KIT, 20" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16, PBO
20" premium flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 20" PARALLEL ARM, CIH 1200, 1 SPRING, 1-1/16, PBO
20" no ream flange bushing rebuild kit for Case-IH 1200 series with 1 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 20" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO
20" premium flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 20" PARALLEL ARM, CIH 800, 900, 950, 955, 5400SS, 5500SS, 1200 W/ 2 SPRINGS, 1-1/16, PBO
20" no ream flange bushing rebuild kit for Case-IH 800, 900, 950, 955, 5400SS, 5500SS; 1200 series with 2 spring or air down pressure. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 Series MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBI
23" no ream flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, NSB, PBO
23" no ream flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBI
23" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 1700, ME5, EE, 1-1/8, PBO
23" premium flange bushing rebuild kit for John Deere 17X5 and DB series with mini hopper hooks and MaxEmerge 5, MaxEmerge 5e, ExactEmerge row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 1700 series CCS with mini hopper hooks. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBI
23" no ream flange bushing rebuild kit forJohn Deere 1700 or DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, NSB, PBO
23" no ream flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBI
23" premium flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8, PBO
23" premium flange bushing rebuild kit for John Deere 1700 and DB series with mini hopper hooks and MaxEmerge Plus or MaxEmerge XP row units. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB
Parallel Linkage Flange Bushing 23" Extended Length Arm Rebuild Kit, 1-1/8" repair for John Deere 7200, 1700 series POLY box planters. Includes flange bushing ready upper and lower parallel arms and flange bushing kit. This kit requires NO reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBI
23" no ream flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units with POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, NSB, PBO
23" no ream flange bushing rebuild kit for John Deere 1700 and DB series with MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units with POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires no reaming to support plate or row unit.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBI
23" premium flange bushing rebuild kit for John Deere 7200, 7300, 1700, DB series with MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed boxes. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the INSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 23" PARALLEL ARM, JD 7200, 1700 POLY BOX PLANTER, 1-1/8, PBO
23" premium flange bushing rebuild kit for John Deere 1700, DB Series with MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5 row units and POLY seed box. Includes parallel arms with flange bushings installed. NOTE: Must confirm number of rows that have the parallel arms installed on the OUTSIDE of the support plate. Requires reamer package PPS688011.
PPS KIT, 24" PARALLEL ARM, CIH W/ SUREFORCE, 1-1/16, PBO
24" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 24" UPPER PARALLEL ARM, CIH 1200, W/ SUREFORCE, 1-1/16", PBO
24" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, 24" UPPER PARALLEL ARM, CIH 1200, W/ SUREFORCE, 1-1/16", PBO
24" premium flange bushing rebuild kit for Case-IH 1200 series with SureForce. Will require the lower holes in the support plate and row unit to be reamed. Includes parallel arms with flange bushings installed. Requires reamer package PPS688012.
PPS KIT, CIH 1200 W/ DELTAFORCE, 1-1/16
Flange bushing 1-1/16” rebuild kit for Case-IH 1200 series with DeltaForce to "rebuild your own" parallel arms. Will require the lower holes in the support plate and row unit to be reamed. Requires reamer package PPS688120. For planters with excessive wear on parallel arms, the 1-1/8” kit (PPK012121) is recommended.
PPS KIT, CIH 1200 W/ DELTAFORCE, 1-1/8
Flange bushing 1-1/8” rebuild kit for Case-IH 1200 series with DeltaForce to "rebuild your own" parallel arms. Will require the lower holes in the support plate and row unit to be reamed. Requires reamer package PPS688121. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/16
Parallel Linkage Flange Bushing Rebuild Kit, 1-1/16" repair for Case-IH 800, 900, 955, 1200, 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580. Requires reamer package 688049. If the holes in the parallel linkage arms are worn more than 1-1/16" then order the 1-1/8" kit.
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/16
Flange bushing 1-1/16” rebuild kit for Case-IH 800, 900, 955, 1200 (without DeltaForce), 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580 to "rebuild your own" parallel arms. Requires reamer package PPS688049. For planters with excessive wear on parallel arms, the 1-1/8” kit (PPK011121) is recommended.
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/8
Parallel Linkage Flange Bushing Rebuild Kit, 1-1/8" repair for Case-IH 800, 900, 955, 1200, 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580. Requires reamer package PPS688050. For planters with excessive wear in parallel arms and 1-1/16" will not fix the oblong hole.
PPS KIT, CIH 800, 900, 955, 1200, 5400SS, 5500SS, NH SP280, SP380, SP480, SP580, 1-1/8
Flange bushing 1-1/8” rebuild kit for Case-IH 800, 900, 955, 1200 (without DeltaForce), 5400 soybean special, 5500 soybean special; New Holland SP280, SP380, SP480, SP580 to "rebuild your own" parallel arms. Requires reamer package PPS688050. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, CLOSING WHEEL BRACKET, JD
John Deere cast closing wheel bracket repair kit. Requires reamer package PPS688111.
PPS KIT, JD 1700, ME5, EE, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere 17X5, DB series; MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Requires reamer package PPS688118. Recommended for newer planters with minimal wear (holes under 1.13")
PPS KIT, JD 1700, ME5, EE, 1-3/16
Flange bushing 1-3/16” rebuild kit for John Deere 17X5, DB series; MaxEmerge 5, MaxEmerge 5e, ExactEmerge. Requires reamer package PPS688316. For newer planters with minimal wear on parallel arms, the 1-1/8” kit (PPK251121) is recommended.
PPS KIT, JD 1700, WITH MINI HOPPER HOOKS, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere 1700, DB series with mini hopper hooks; MaxEmerge Plus, MaxEmerge XP. Requires reamer package PPS688118. Recommended for newer planters with minimal wear (holes under 1.13").
PPS KIT, JD 1700, WITH MINI HOPPER HOOKS, 1-3/16
Flange bushing 1-3/16” rebuild kit for John Deere 1700, DB series with mini hopper hooks; MaxEmerge Plus, MaxEmerge XP. Requires reamer package PPS688316. For newer planters with minimal wear on parallel arms, the 1-1/8” kit (PPK241121) is recommended.
PPS KIT, JD 7000, 1-1/16
Flange bushing 1-1/16” rebuild kit for John Deere 7000, 7100 series to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8” kit (PPK211121) is recommended.
PPS KIT, JD 7000, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere 7000, 7100 series. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, JD 7200, 1700 POLY BOX PLANTER, 1-1/8
Flange bushing 1-1/8” rebuild kit for John Deere poly box 7200, 7300, 1700, DB series; MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5. Requires reamer package PPS688118.. Recommended for newer planters with minimal wear (holes under 1.13")
PPS KIT, JD 7200, 1700 POLY BOX PLANTER, 1-3/16
Flange bushing 1-3/16” rebuild kit for John Deere poly box 7200, 7300, 1700, DB series; MaxEmerge 2, MaxEmerge Plus, MaxEmerge XP, MaxEmerge 5. Requires reamer package PPS688316.
PPS KIT, JD 7200, 7300, FIBERGLASS BOX PLANTER, 1-1/8
Flange bushing 1-1/8” rebuild kit for fiberglass box John Deere 7200, 7300 series; MaxEmerge 2. Requires reamer package PPS688118. Recommended for newer planters with minimal wear (holes under 1.13")
PPS KIT, JD 7200, 7300, FIBERGLASS BOX PLANTER, 1-3/16
Flange bushing 1-3/16” rebuild kit for fiberglass box John Deere 7200, 7300 series; MaxEmerge 2. Requires reamer package PPS688316. For newer planters with minimal wear on parallel arms, the 1-1/8” kit (PPK221121) is recommended.
PPS KIT, JD DOWN PRESSURE SUPPORT ARM
John Deere Down Pressure Support Arm Repair Kit. Bushing kit to repair where John Deere part number 55881 is used. Repairs the two top holes that were round. If the lower oblong hole is worn enough, use one of the old upper pins to remove the slack. Requires reamer package PPS688222.
PPS KIT, KINZE 2000 PUSH ROWS, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 2000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK421121) is recommended.
PPS KIT, KINZE 2000 PUSH ROWS, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 2000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 2000, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 2000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK411121) is recommended.
PPS KIT, KINZE 2000, 1-1/8
Flange bushing 1-1/8” rebuild kit for Kinze 2000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 2000, REAR ROWS, WITH DELTA FORCE, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 2000 series standard row "pull unit" with DeltaForce to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK411121.01) is recommended.
PPS KIT, KINZE 2000, REAR ROWS, WITH DELTA FORCE, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 2000 series standard row "pull unit" with DeltaForce to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 3000 PUSH ROWS, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK441121) is recommended.
PPS KIT, KINZE 3000 PUSH ROWS, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 3000 series split row "push unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 3000, REAR ROWS, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK431121) is recommended.
PPS KIT, KINZE 3000, REAR ROWS, 1-1/8
Flange bushing 1-1/8” rebuild kit for Kinze 3000 series standard row "pull unit" to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 3000, REAR ROWS, WITH DELTA FORCE, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series standard row "pull unit" with DeltaForce to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK431121.01) is recommended.
PPS KIT, KINZE 3000, REAR ROWS, WITH DELTA FORCE, 1-1/16, NSB, PBO
16" no ream flange bushing rebuild kit for Kinze 3000 series standard row "pull unit" with DeltaForce. Includes parallel arms with flange bushings installed. Requires no reaming to support plate or row unit.
PPS KIT, KINZE 3000, REAR ROWS, WITH SURE FORCE, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK431121.02) is recommended.
PPS KIT, KINZE 3000, REAR ROWS, WITH SURE FORCE, 1-1/8
Flange bushing 1-1/8" rebuild kit for Kinze 3000 series standard row "pull unit" with SureForce to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, KINZE 4900, 1-1/16
Flange bushing 1-1/16" rebuild kit for Kinze 4900 series planters to "rebuild your own" parallel arms. Requires reamer package PPS688049. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK452121) is recommended.
PPS KIT, KINZE 4900, 1-1/8
Flange bushing 1-1/8” rebuild kit for Kinze 4900 series planters to "rebuild your own" parallel arms. Requires reamer package PPS688050. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, ROW CLEANER, MARTIN, 1-1/16
Flange Bushing Rebuild Kit, 1-1/16" repair for Martin row cleaners. Fits Martin C125, WA1345, WA1360 floating row cleaners or any model using 7/8" OD bushings and 5/8" bolts. Requires reamer package PPS688116. If the holes in the parallel linkage arms are worn more than 1-1/16" then order the 1-1/8" kit.
PPS KIT, ROW CLEANER, MARTIN, 1-1/8
Flange Bushing Rebuild Kit, 1-1/8" repair for Martin row cleaners. Fits Martin C125, WA1345, WA1360 floating row cleaners or any model using 7/8" OD bushings and 5/8" bolts. Requires reamer package PPS688118. For row cleaners with excessive wear in the arms and 1-1/16" will not fix the oblong hole.
PPS KIT, ROW CLEANER, YETTER, 1-1/16
Flange Bushing Rebuild Kit, 1-1/16" repair for Yetter row cleaners. Requires reamer package PPS688049.
PPS KIT, WHITE 5000, 6000, 8000, 1-1/16
Flange bushing 1-1/16" rebuild kit for White 5000, 6000, 8000 series to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK611121) is recommended.
PPS KIT, WHITE 5000, 6000, 8000, 1-1/8
Flange bushing 1-1/8" rebuild kit for White 5000, 6000, 8000 series to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, WHITE 9000 BOX PLANTER, WHITE 9000 VE; PP, 1-1/16
Flange bushing 1-1/16” rebuild kit for Precision Planting ready row unit (box & mini hopper); White 9000 VE (Vacuum Electric) box & mini hopper; White 9000 box planters to "rebuild your own" parallel arms. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK631121) is recommended.
PPS KIT, WHITE 9000 BOX PLANTER; WHITE 9000 VE; PP, 1-1/8
Flange bushing 1-1/8" rebuild kit for Precision Planting ready row unit (box & mini hopper); White 9000 VE (Vacuum Electric) box & mini hopper; White 9000 box planters to "rebuild your own" parallel arms. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS KIT, WHITE 9000 MINI HOPPER, 1-1/16
Flange bushing 1-1/16" rebuild kit for White 9000 series mini hopper. Requires reamer package PPS688116. For planters with excessive wear on parallel arms, the 1-1/8" kit (PPK6121121) is recommended.
PPS KIT, WHITE 9000 MINI HOPPER, 1-1/8
Flange bushing 1-1/8" rebuild kit for White 9000 series mini hopper. Requires reamer package PPS688118. Recommended for planters with excessive wear (holes beyond 1.07").
PPS REAMER PKG, 1-1/16"
1-1/16" reamer package includes 1-1/16" reamer (PPS680116), 11/16" reamer (PPS681116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
PPS REAMER PKG, 1-1/16"
1-1/16" reamer package includes 1-1/16" reamer (PPS680116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100). Will only work with Case-IH and Kinze 4900 series.
PPS REAMER PKG, 1-1/8"
1-1/8" reamer package includes 1-1/8" reamer (PPS680118), 11/16" reamer (PPS681116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
PPS REAMER PKG, 1-1/8"
1-1/8" reamer package includes 1-1/8" reamer (PPS680118), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100). Will only work with Case-IH and Kinze 4900 series.
PPS REAMER PKG, 1-3/16"
1-3/16" reamer package includes 1-3/16" reamer (PPS680136), 11/16" reamer (PPS681116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
PPS REAMER PKG, 11/16"
11/16" reamer package includes 11/16" reamer (PPS681116) and cutting fluid (PPS699100).
PPS REAMER PKG, 11/16"
11/16" reamer package includes 11/16" reamer (PPS601116) and cutting fluid (PPS699100).
PPS REAMER PKG, CIH 1200, 1-1/16"
1-1/16" reamer package includes 1-1/16" reamer (PPS680116), 11/16" reamer (PPS601116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100).
PPS REAMER PKG, CIH 1200, 1-1/8"
1-1/8" reamer package includes 1-1/8" reamer (PPS680118), 11/16" reamer (PPS601116), 7/16" drill bit (PPS610716) and cutting fluid (PPS699100). Will only work with Case-IH 1200 with DeltaForce or SureForce.
PPS REAMER PKG, CIH CLOSING WHEEL ARM
1-1/4" Case-IH closing wheel arm reamer package includes 1-1/4" reamer (PPS680114) and cutting fluid (PPS699100).
PPS REAMER PKG, CWB, 1-11/16"
1-11/16" closing wheel bracket reamer package Includes 1-11/16" reamer (PPS680016), 7/16" drill bit (PPS610716), retaining compound (PPS699101) and cutting fluid (PPS699100).
PPS REAMER PKG, JD CWB SPRING HOLE
11/16" reamer package for John Deere closin11/16" reamer package for John Deere closing wheel bracket spring hole repair. Includes 11/16" reamer (PPS681116), step drill bit (PPS699102), cutting fluid (PPS699100) and retaining compound (PPS699101).
PPS REAMER PKG, JD SUPPORT ARM
1-1/8" John Deere air bag down pressure supprt arm reamer package includes 1-1/8" reamer (PPS688118) and cutting fluid (PPS699100).
PPS UPPER CYLINDER BRACKET, DELTA FORCE
PPS upper cylinder bracket for delta force. Required if purchasing Precision Planting Delta Force and PPS arms at the same time.
PRECISION BRUSH, MAROON, PKG OF 2
PRECISION INSERT "A"
Replacement "A" Insert, most field corn and larger popcorn.
PRECISION INSERT "C"
Replacement "C" Insert, sunflower, sweet corn and edible beans.
PRECISION METER, GP, 12F, CORN
Precision Finger Pick-Up Meter, will fit Great Plains planters.
PRECISION METER, GP, 12F, SUNFLOWER
Precision Finger Pick-Up Meter, will fit Great Plains planters.
PRECISION METER, GP, 6F, CORN
Precision Finger Pick-Up Meter, will fit Great Plains planters.
PRECISION METER, JD 7000, KZ 2000, 12F, POPCORN
Precision Finger Pick-Up Meter for popcorn, fits John Deere 7000 & 7100. Kinze 2000 series.
PRECISION METER, JD 7200, 1700, 12F, POPCORN
Precision Finger Pick-Up Meter for popcorn, fits John Deere planter models 7200, 7300 & 1700 series.
PRECISION METER, JD 7200, 1700, 12F, SUNFLOWER
Precision Finger Pick-Up Meter for sunflowers, fits John Deere planter models 7200, 7300, 1700 series. This is a special meter used to plant #3 and #4 size sunflower seeds. It uses the "C" insert and the sunflower finger set with the brushless blank. The blank is just a filler block with no brush or bristles. For #1 and #2 size sunflower seeds, use the standard corn finger because they are too large for the sunflower finger. In this case, order the standard corn meter and replace the A insert with the C insert and the adjustable brush with the brushless blank.
PRECISION METER, JD 7200, 1700, 6F, PUMPKIN
Precision Finger Pick-Up Meter for pumpkins, fits John Deere 7200, 7300, 1700 series. Pumpkin meters have 6 fingers and the flags are modified into the shape of a pendant. The pumpkin meter has a "C" insert installed which has a unique agitation profile that improves singulation. The pumpkin meter comes with an adjustable brush. For optimum performance, run the pumpkin meter on a Test Stand with the seed you are planting for the proper brush setting. It is recommended that the hole in the "C" insert is modified by enlarging it so there is a larger opening for the seed to exit. Generally, the 6-finger pumpkin meter will plant around 5,000 seeds per acre, which is typical for smaller canning pumpkins. For larger Jack-O-Lantern pumpkins you will need to modify the finger set so it only has 2 fingers. This will reduce the population by one-third.
PRECISION METER, KZ 3000, 12F, POPCORN
Precision Finger Pick-Up Meter for popcorn, fits Kinze planter model 3000 series.
PRECISION METER, KZ 3000, 12F, SUNFLOWER
Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series.
PRECISION METER, KZ 3000, 12F, SWEET CORN
Precision Finger Pick-Up Meter for sweet corn, fits Kinze planter model 3000 series.
PRECISION METER, KZ 3000, 6F, CORN
Precision Finger Pick-Up Meter, fits Kinze planter model 3000 series. Recommended for 15-20" row spacing.
PRECISION METER, KZ 3000, 6F, PUMPKIN
Precision Finger Pick-Up Meter for pumpkins, fits Kinze 3000 series. Pumpkin meters have 6 fingers and the flags are modified into the shape of a pendant. The pumpkin meter has a "C" insert installed which has a unique agitation profile that improves singulation. The pumpkin meter comes with an adjustable brush. For optimum performance, run the pumpkin meter on a Test Stand with the seed you are planting for the proper brush setting. It is recommended that the hole in the "C" insert is modified by enlarging it so there is a larger opening for the seed to exit. Generally, the 6-finger pumpkin meter will plant around 5,000 seeds per acre, which is typical for smaller canning pumpkins. For larger Jack-O-Lantern pumpkins you will need to modify the finger set so it only has 2 fingers. This will reduce the population by one-third.
PRECISION PLANTING TREADER WHEEL, PKG OF 2
Precision Planting 3.5" Wide Treader Wheel Kit. These are packaged per row. Hardware not included.
PRESSURE SWITCH
PRO CHUTE I, YELLOW, 7.5" X 62"
Empty your seed boxes directly into your planter. Seed flows smoothly and quickly when you attach the PRO Chute to your bulk seed box. The funnel system is made of UHMW for durability, wear resistance, and slick properties. In as little as four minutes you can empty your seed box with the PRO Chute II. Quick attach for safe unloading. Our PRO Chute snaps into your seed box in under five seconds, without looking underneath to line up brackets. Never stand underneath a raised box again. There is a full 79" of clearance from the lift to the end of the PRO Chute giving you maximum clearance. Slide Gate controls the seed flow.
PRO CHUTE II, BLUE, 10.5" X 60"
Empty your seed boxes directly into your planter. Seed flows smoothly and quickly when you attach the PRO Chute to your bulk seed box. The funnel system is made of UHMW for durability, wear resistance, and slick properties. In as little as two minutes you can empty your seed box with the PRO Chute II. Quick attach for safe unloading. Our PRO Chute snaps into your seed box in under five seconds, without looking underneath to line up brackets. Never stand underneath a raised box again. There is a full 79" of clearance from the lift to the end of the PRO Chute giving you maximum clearance. Slide Gate controls the seed flow.
PUSH NUT, SINGLE
Push nut for long center connector that attaches to center adjusting rod.
top
top